Yamaha H01 Uživatelský manuál

Kategorie
Digitální piana
Typ
Uživatelský manuál
JA
Owner’s Manual
Bedienungsanleitung
Mode d’emploi
Manual de instrucciones
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
ES
FR
DE
EN
H01
DIGITAL PIANO
H01 Owner’s Manual
2
SPECIAL MESSAGE SECTION
PRODUCT SAFETY MARKINGS: Yamaha electronic
products may have either labels similar to the graphics
shown below or molded/stamped facsimiles of these graph-
ics on the enclosure. The explanation of these graphics
appears on this page. Please observe all cautions indicated
on this page and those indicated in the safety instruction sec-
tion.
See bottom of Keyboard enclosure for graphic symbol markings.
The exclamation point within the equi-
lateral triangle is intended to alert the
user to the presence of important operat-
ing and maintenance (servicing) instruc-
tions in the literature accompanying the
product.
The lightning flash with arrowhead sym-
bol, within the equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage”
within the product’s enclosure that may
be of sufficient magnitude to constitute a
risk of electrical shock.
IMPORTANT NOTICE: All Yamaha electronic products
are tested and approved by an independent safety testing
laboratory in order that you may be sure that when it is prop-
erly installed and used in its normal and customary manner,
all foreseeable risks have been eliminated. DO NOT modify
this unit or commission others to do so unless specifically
authorized by Yamaha. Product performance and/or safety
standards may be diminished. Claims filed under the
expressed warranty may be denied if the unit is/has been
modified. Implied warranties may also be affected.
SPECIFICATIONS SUBJECT TO CHANGE: The
information contained in this manual is believed to be cor-
rect at the time of printing. However, Yamaha reserves the
right to change or modify any of the specifications without
notice or obligation to update existing units.
ENVIRONMENTAL ISSUES: Yamaha strives to produce
products that are both user safe and environmentally
friendly. We sincerely believe that our products and the pro-
duction methods used to produce them, meet these goals. In
keeping with both the letter and the spirit of the law, we
want you to be aware of the following:
Battery Notice: This product MAY contain a small non-
rechargeable battery which (if applicable) is soldered in
place. The average life span of this type of battery is approx-
imately five years. When replacement becomes necessary,
contact a qualified service representative to perform the
replacement.
Warning: Do not attempt to recharge, disassemble, or incin-
erate this type of battery. Keep all batteries away from chil-
dren. Dispose of used batteries promptly and as regulated by
applicable laws. Note: In some areas, the servicer is required
by law to return the defective parts. However, you do have
the option of having the servicer dispose of these parts for
you.
Disposal Notice: Should this product become damaged
beyond repair, or for some reason its useful life is consid-
ered to be at an end, please observe all local, state, and fed-
eral regulations that relate to the disposal of products that
contain lead, batteries, plastics, etc.
NOTICE: Service charges incurred due to lack of knowl-
edge relating to how a function or effect works (when the
unit is operating as designed) are not covered by the manu-
facturer’s warranty, and are therefore the owners responsi-
bility. Please study this manual carefully and consult your
dealer before requesting service.
NAME PLATE LOCATION: The graphic below indicates
the location of the name plate. The model number, serial
number, power requirements, etc., are located on this plate.
You should record the model number, serial number, and the
date of purchase in the spaces provided below and retain this
manual as a permanent record of your purchase.
Model
Serial No.
Purchase Date
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
92-469- (bottom)
H01 Owner’s Manual
3
IMPORTANT SAFETY INSTRUCTIONS
INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK,
AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST.
WARNING- When using any electrical or electronic product,
basic precautions should always be followed. These precautions
include, but are not limited to, the following:
1. Read all Safety Instructions, Installation Instructions, Spe-
cial Message Section items, and any Assembly Instructions
found in this manual BEFORE making any connections, includ-
ing connection to the main supply.
2. Main Power Supply Verification: Yamaha products are
manufactured specifically for the supply voltage in the area
where they are to be sold. If you should move, or if any doubt
exists about the supply voltage in your area, please contact your
dealer for supply voltage verification and (if applicable) instruc-
tions. The required supply voltage is printed on the name plate.
For name plate location, please refer to the graphic found in the
Special Message Section of this manual.
3. This product may be equipped with a polarized plug (one
blade wider than the other). If you are unable to insert the plug
into the outlet, turn the plug over and try again. If the problem
persists, contact an electrician to have the obsolete outlet
replaced. Do NOT defeat the safety purpose of the plug.
4. Some electronic products utilize external power supplies
or adapters. Do NOT connect this type of product to any power
supply or adapter other than one described in the owners manual,
on the name plate, or specifically recommended by Yamaha.
5. WARNING: Do not place this product or any other
objects on the power cord or place it in a position where anyone
could walk on, trip over, or roll anything over power or connect-
ing cords of any kind. The use of an extension cord is not recom-
mended! If you must use an extension cord, the minimum wire
size for a 25’ cord (or less) is 18 AWG. NOTE: The smaller the
AWG number, the larger the current handling capacity. For
longer extension cords, consult a local electrician.
6. Ventilation: Electronic products, unless specifically
designed for enclosed installations, should be placed in locations
that do not interfere with proper ventilation. If instructions for
enclosed installations are not provided, it must be assumed that
unobstructed ventilation is required.
7. Temperature considerations: Electronic products should
be installed in locations that do not significantly contribute to
their operating temperature. Placement of this product close to
heat sources such as; radiators, heat registers and other devices
that produce heat should be avoided.
8. This product was NOT designed for use in wet/damp loca-
tions and should not be used near water or exposed to rain.
Examples of wet/damp locations are; near a swimming pool,
spa, tub, sink, or wet basement.
9. This product should be used only with the components
supplied or; a cart, rack, or stand that is recommended by the
manufacturer. If a cart, rack, or stand is used, please observe all
safety markings and instructions that accompany the accessory
product.
10. The power supply cord (plug) should be disconnected
from the outlet when electronic products are to be left unused for
extended periods of time. Cords should also be disconnected
when there is a high probability of lightning and/or electrical
storm activity.
11. Care should be taken that objects do not fall and liquids are
not spilled into the enclosure through any openings that may exist.
12. Electrical/electronic products should be serviced by a
qualified service person when:
a. The power supply cord has been damaged; or
b. Objects have fallen, been inserted, or liquids have been
spilled into the enclosure through openings; or
c. The product has been exposed to rain: or
d. The product dose not operate, exhibits a marked change
in performance; or
e. The product has been dropped, or the enclosure of the
product has been damaged.
13. Do not attempt to service this product beyond that
described in the user-maintenance instructions. All other servic-
ing should be referred to qualified service personnel.
14. This product, either alone or in combination with an
amplifier and headphones or speaker/s, may be capable of pro-
ducing sound levels that could cause permanent hearing loss.
DO NOT operate for a long period of time at a high volume level
or at a level that is uncomfortable. If you experience any hearing
loss or ringing in the ears, you should consult an audiologist.
IMPORTANT: The louder the sound, the shorter the time period
before damage occurs.
15. Some Yamaha products may have benches and/or accessory
mounting fixtures that are either supplied as a part of the product
or as optional accessories. Some of these items are designed to be
dealer assembled or installed. Please make sure that benches are
stable and any optional fixtures (where applicable) are well
secured BEFORE using. Benches supplied by Yamaha are
designed for seating only. No other uses are recommended.
PLEASE KEEP THIS MANUAL
92-469-2
1
H01 Owner’s Manual
ENGLISH
4
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
Only use the voltage specified as correct for the instrument. The required voltage
is printed on the name plate of the instrument.
Check the electric plug periodically and remove any dirt or dust which may have
accumulated on it.
Use only the supplied power cord/plug.
Do not place the power cord near heat sources such as heaters or radiators, and
do not excessively bend or otherwise damage the cord, place heavy objects on
it, or place it in a position where anyone could walk on, trip over, or roll anything
over it.
Do not open the instrument or attempt to disassemble the internal parts or
modify them in any way. The instrument contains no user-serviceable parts. If it
should appear to be malfunctioning, discontinue use immediately and have it
inspected by qualified Yamaha service personnel.
Do not expose the instrument to rain, use it near water or in damp or wet
conditions, or place containers on it containing liquids which might spill into
any openings.
Never insert or remove an electric plug with wet hands.
Do not put burning items, such as candles, on the unit.
A burning item may fall over and cause a fire.
If the power cord or plug becomes frayed or damaged, or if there is a sudden
loss of sound during use of the instrument, or if any unusual smells or smoke
should appear to be caused by it, immediately turn off the power switch,
disconnect the electric plug from the outlet, and have the instrument inspected
by qualified Yamaha service personnel.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:
When removing the electric plug from the instrument or an outlet, always hold
the plug itself and not the cord. Pulling by the cord can damage it.
Remove the electric plug from the outlet when the instrument is not to be used
for extended periods of time, or during electrical storms.
Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause overheating in the
outlet.
Read carefully the attached documentation explaining the assembly process.
Failure to assemble the instrument in the proper sequence might result in
damage to the instrument or even injury.
Do not expose the instrument to excessive dust or vibrations, or extreme cold or
heat (such as in direct sunlight, near a heater, or in a car during the day) to
prevent the possibility of panel disfiguration or damage to the internal
components.
Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile
phone, or other electric devices. Otherwise, the instrument, TV, or radio may
generate noise.
Do not place the instrument in an unstable position where it might accidentally
fall over.
Before moving the instrument, remove all connected cables.
When setting up the product, make sure that the AC outlet you are using is easily
accessible. If some trouble or malfunction occurs, immediately turn off the
power switch and disconnect the plug from the outlet. Even when the power
switch is turned off, electricity is still flowing to the product at the minimum
level. When you are not using the product for a long time, make sure to unplug
the power cord from the wall AC outlet.
Power supply/Power cord
Do not open
Water warning
Fire warning
If you notice any abnormality
Power supply/Power cord
Assembly
Location
(1)B-11 1/2
2
H01 Owner’s Manual
ENGLISH
5
Before connecting the instrument to other electronic components, turn off the
power for all components. Before turning the power on or off for all components,
set all volume levels to minimum. Also, be sure to set the volumes of all
components at their minimum levels and gradually raise the volume controls
while playing the instrument to set the desired listening level.
In the case of a model with a polished finish, gently remove dust and dirt with a
soft cloth. Do not wipe too hard since small particles of dirt can scratch the
instrument's finish.
When cleaning the instrument, use a soft, dry or slightly damp cloth. Do not use
paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping
cloths.
•Take care that the key cover does not pinch your fingers, and do not insert a
finger or hand in any gaps on the key cover or instrument.
Never insert or drop paper, metallic, or other objects into the gaps on the key
cover, panel or keyboard. If this happens, turn off the power immediately and
unplug the power cord from the AC outlet. Then have the instrument inspected
by qualified Yamaha service personnel.
Do not place vinyl, plastic or rubber objects on the instrument, since this might
discolor the panel or keyboard.
In the case of a model with a polished finish, bumping the surface of the
instrument with metal, porcelain, or other hard objects can cause the finish to
crack or peel. Use caution.
Do not rest your weight on, or place heavy objects on the instrument, and do not
use excessive force on the buttons, switches or connectors.
Do not use the instrument/device or headphones for a long period of time at a
high or uncomfortable volume level, since this can cause permanent hearing
loss. If you experience any hearing loss or ringing in the ears, consult a
physician.
Do not place the bench in an unstable position where it might accidentally fall
over.
Do not play carelessly with or stand on the bench. Using it as a tool or step-
ladder or for any other purpose might result in accident or injury.
Only one person should sit on the bench at a time, in order to prevent the
possibility of accident or injury.
If the bench screws become loose due to extensive long-term use, tighten them
periodically using the included tool.
Backing up the USB storage device
•To protect against data loss through media damage, we recommend that you
save your important data onto two USB storage devices.
Always turn the power off when the instrument is not in use.
*The illustrations as shown in this owner’s manual are for instructional purposes only, and may appear somewhat different from those on
your instrument.
*Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except
for your personal use.
•The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their respective companies.
Connections
Maintenance
Handling caution
Using the bench (If included)
Saving data
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has
license to use others’ copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files,
WAVE data, musical scores and sound recordings. Any unauthorized use of such programs and contents outside of personal use is not per-
mitted under relevant laws. Any violation of copyright has legal consequences. DON’T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.
(1)B-11 2/2
3
H01 Owner’s Manual
ENGLISH
6
Introduction
Thank you for purchasing the Yamaha Digital Piano H01!
We recommend that you read this manual carefully so that you can
fully take advantage of the advanced and convenient functions of the
H01.
We also recommend that you keep this manual in a safe and handy
place for future reference.
Main Features
Stylish and sophisticated digital piano
The H01 combines true piano sound in a modern, attractive cabinet that evokes the beauty of a real acoustic grand
piano—adding sophistication and musical expressiveness to your living space.
Authentic Acoustic Piano—like Touch Natural Wood Keyboard
The special Natural Wood keyboard uses real wood (on the white keys), to reproduce as closely as possible the experi-
ence of playing an actual acoustic grand piano. The authentic touch and feel of the keys goes far beyond existing elec-
tronic keyboards, realistically recreating the hardness of the keys, the balance between the weight of the key and
hammer, and the characteristic weight gradations of the keys—heavy in the low end, light in the high register—to
make you feel as if youre playing a real grand piano. Moreover, this specially crafted keyboard lets you use techniques
only possible on grand pianos, such as playing the same note successively and having the sounds blend smoothly even
without use of the damper pedal, or playing the same key quickly and having perfect articulation without the sound
cutting off unnaturally.
AWM Dynamic Stereo Sampling
The Yamaha H01 offers unmatched sonic realism and natural grand-piano type playability as well as Yamahas original
AWM Dynamic Stereo Sampling tone generation technology for rich, musical voices.
The Grand Piano 1 feature totally new samples painstakingly recorded from a full concert grand piano.
And the voice feature three velocity-switched samples (Dynamic Sampling), special Sustain Sampling (page 15) that
samples the unique resonance of an acoustic grand pianos soundboard and strings when the sustain pedal is pressed,
and Keyoff Samples that add the subtle sound produced when the keys are released. The H01 comes much closer to the
sound of a true acoustic piano.
Accessories
Owner’s Manual
This manual contains complete instructions for operating your H01.
Quick Operation Guide
Bench (included or optional depending on local)
4
H01 Owner’s Manual
ENGLISH
7
Table of Contents
Introduction
Main Features...............................................................................................6
Accessories ...................................................................................................6
Panel Controls and Terminals......................................................................8
Before Using the H01...................................................................................9
Opening the key cover and lid ...................................................................................... 9
Closing the key cover and lid ........................................................................................ 9
Turning the Power On ................................................................................................ 10
Setting the Volume...................................................................................................... 10
Using Headphones ...................................................................................................... 10
Reference
Listening to the 50 Piano Preset Songs.....................................................11
Listening to songs in the USB Flash Memory............................................12
USB Flash Memory...................................................................................................... 13
Specify the Song Track and Play the Song................................................14
Selecting & Playing Voices.........................................................................15
Selecting Voices ........................................................................................................... 15
Using the Pedals........................................................................................................... 16
Combining Voices (Dual)........................................................................................... 17
Adding Variations to the Sound – Reverb ................................................................. 18
Transposition............................................................................................................... 19
Fine tuning of the Pitch............................................................................................... 19
Touch Sensitivity ......................................................................................................... 20
Troubleshooting.........................................................................................21
Keyboard Stand Assembly .........................................................................22
Appendix
Song List.....................................................................................................26
Specifications .............................................................................................27
Optional Equipment...................................................................................27
5
Panel Controls and Terminals
H01 Owner’s Manual
ENGLISH
8
Panel Controls and Terminals
1 [POWER] switch........................... page 10
For turning the power on or off.
2 [MASTER VOLUME] slider ........... page 10
For adjusting the volume level of the entire sound.
3 [BGM] button ...........pages 11, 12, 14, 19
For playing the 50 piano preset songs.
4 [VOICE] button .........pages 14, 15, 17–20
For selecting voices from 10 internal sounds including
Grand Piano 1 and 2 (page 15). You can also combine
two voices (page 17) or add reverb effects to the
selected voice for your keyboard performance
(page 18).
5 SELECT [-]/[+] buttons....pages 11, 12, 15
For selecting a song (page 11) or a voice (page 15).
6 [PHONES] jack..............................page 10
For connecting a set of stereo headphones, allowing
private practice.
7 [AUX OUT] jack
For outputting the sound of the instrument to an
external audio system.
8 [USB TO DEVICE] terminal ..........page 12
For connecting a USB storage device and playing song
data from the device.
9 Pedals...........................................page 16
For producing a range of expressive effects similar to
those produced by the pedals on an acoustic piano.
qwer
o
y
i
u
t
6
Before Using the H01
H01 Owner’s Manual
ENGLISH
9
Before Using the H01
Opening the key cover and lid
1. Lift open the key cover and fold it back-
ward.
CAUTION
Hold the cover with both hands when opening or closing it.
CAUTION
Do not release the cover until it is fully folded back or closed.
CAUTION
Be careful to avoid catching your fingers (yours or others, especially
children’s) when opening the cover.
2. Raise and hold the lid up as shown.
CAUTION
Raising the lid past the normal height can result in damage to the
instrument.
3. Raise the lid stay and carefully lower the
lid so that the end of the stay fits into the
recess in the lid and holds it in place.
Closing the key cover and lid
1. Hold the lid stay and carefully raise the lid.
2. Hold the lid in its raised position and
lower the lid stay.
3. Carefully lower the lid.
4. Close the key cover.
CAUTION
Be careful to avoid catching your fingers (yours or others, especially
children’s) when opening the cover.
q
w
e
Do not lift the lid any higher
than necessary.
r
e
w
7
Before Using the H01
H01 Owner’s Manual
ENGLISH
10
Tur ning the Power On
1. Insert the plug of the power cable into the
AC connector on the instrument, then
plug the other end of the cable into the
proper AC outlet on the wall.
CAUTION
Never interrupt the power supply during the instrument load opera-
tion! Doing so can result in loss of data.
2. Press the [POWER] switch to turn the
power on.
The power indicator located to the right of the [POWER] switch
lights up.
CAUTION
Never interrupt the power supply while the instrument is loading
data from a USB device! Doing so can result in loss of data.
CAUTION
Even when the instrument is turned off, electricity is still flowing to
the instrument at the minimum level. When you are not using the
H01 for a long time or during electrical storms, make sure you
unplug the AC power plug from the wall AC outlet.
Setting the Volume
Initially set the [MASTER VOLUME] slider about halfway
between the “MIN” and “MAX” settings. Then, when you
start playing, re-adjust the [MASTER VOLUME] slider to the
most comfortable listening level.
Using Headphones
Connect a set of headphones to one of the
[PHONES] jacks.
Two
[PHONES] jacks are provided. You can
connect two sets of stereo headphones. (If
you are using only one set of headphones,
you can plug them into either jack.) It can also
connect to an amplifier/speaker system.
CAUTION
To protect your hearing, avoid listening to the H01 at a
high volume level for long periods of time.
All current panel settings will be changed to the initial settings when turn-
ing the power off and on.
TERMINOLOGY
MASTER VOLUME:
The volume level of the entire keyboard sound.
(The shape of plug differs
depending on locale.)
NOTE
The level increases.The level decreases.
Stereo mini
plug
8
Listening to the 50 Piano Preset Songs
H01 Owner’s Manual
ENGLISH
11
Listening to the 50 Piano Preset Songs
The H01 features a variety of preset songs specially recorded to showcase the capabilities of the
instrument.
1. Press the [POWER] switch to turn the power on.
When the power is turned ON, the power indicator
located to the right of the [POWER] switch lights up.
2. Adjust the volume.
Initially set the [MASTER VOLUME] slider about half
way between the “MIN” and “MAX” settings. Then,
when you start playing, re-adjust the
[MASTER VOL-
UME]
slider to the most comfortable listening level.
3. Listen the preset songs.
Listening to the preset songs in random order
Press the [BGM] button to play the songs in random
order.
Press the SELECT [-]/[+] button to jump to the next
song in random order.
Selecting and listening to a favorite preset song
You can select and play a favorite song.
Press one of the C2–C#6 keys while holding down the [BGM] button. Refer to
the “Song List” on page 26 for a list of the preset song names and the corre-
sponding keys for selecting them.
Selecting a favorite scene and listening to the songs
Preset songs are also divided into scene categories (for different music listening
preferences). While holding down the [BGM] button, press one of the C0–C1
keys to select a favorite scene. Press the SELECT [-]/[+] button to jump to the
next song in the selected scene.
4. Press the [BGM] button to stop playback.
TERMINOLOGY
Song:
On the H01, performance data is
called a “Song.”
Preset:
Preset Data supplied with the
internal memory of the H01
shipped from the factory.
TERMINOLOGY
Random order:
The 50 Piano songs are selected
and played back randomly by the
instrument—similar to the shuf-
fling of a deck of cards—when
pressing the [BGM] button.
The 50 Piano Preset songs can-
not be played when a USB stor-
age device is connected to the
[USB DEVICE] terminal.
For safety’s sake, when you dis-
connect a USB device, make sure
to wait for at least six seconds
before reconnecting it.
TERMINOLOGY
Scene:
The 50 Piano Preset songs have
been divided into thirteen groups
or categories, to match a variety
of listening preferences and to let
you select your favorite songs
based on a scene description.
For instance, if you want to listen
to some “Elegant” songs, select
scene number 4. The songs that
match that category will play
sequentially.
Scene Titles:
1. Home Party
2. Morning
3. Upbeat
4. Elegant
5. Relaxing
6. Nighttime
7. Melancholy
8. Mood Music
9. Fantasy
10. Baroque and Pre-romantic
Music
11. Pre-romantic (Chopin)
12. Post-romantic
13. Modern French
NOTE
1st
song
10th
song
20th
song
30th
song
40th
song
50th song
(C#6)
C2 C3 C4 C5
C0 C1
Reference
9
Listening to songs in the USB Flash Memory
H01 Owner’s Manual
ENGLISH
12
Listening to songs in the USB Flash Mem-
ory
Save the song data to a USB storage device by using the computer and then connect the device to
the instrument. The song data can be automatically loaded.
CAUTION
While loading the data from USB Flash Memory (LED flashes) or playing the USB song, never pull out the device or turn the
power off. Doing so can result in a loss of data.
1. Start/Stop the song.
Press the [BGM] button to play the songs in random
order.
USB song data can be played back only in random
order.
2. Press the SELECT [-]/[+] button to
jump to the next song in random
order.
Data format
This instrument can play back SMF Format 0 (Standard MIDI file) and DOC
(Disk Orchestra Collection) song data.
When copying song data from computer to USB flash memory, make sure to
save it by using SMF Format 0.
Keep in mind that songs recorded on other devices may use a variety of voices
not available on this instrument and hence may sound different than the origi-
nal songs. In general, this instrument should be used to play back piano songs.
When loading of the data is complete,
the LED will light continuously.
USB Flash Memory
Certain songs may take more
time than others to start playback.
Keep in mind that this also affects
the time between playback of
successively played songs.
NOTE
If you don’t have a USB flash memory, you will need to purchase one (or more, as needed).
The instrument does not necessarily support all commercially available USB storage devices.
Yamaha cannot guarantee operation of USB storage devices that you purchase.
Before purchasing USB storage devices, please consult your Yamaha dealer, or an authorized
Yamaha distributor (see list at end of the Owner’s Manual) for advice.
TERMINOLOGY
What is SMF (Standard MIDI
File)?
The SMF (Standard MIDI File) for-
mat is one of the most common
and widely compatible sequence
formats used for storing
sequence data. There are two
variations: Format 0 and Format
1. A large number of MIDI
devices are compatible with SMF
Format 0, and most commercially
available MIDI sequence data is
provided in SMF Format 0.
10
Listening to songs in the USB Flash Memory
H01 Owner’s Manual
ENGLISH
13
USB Flash Memory
To protect your data (write-protect switch)
Even though this instrument does not have a save operation and data cannot be
saved to a USB storage device, there is still a possibility of data loss caused by
improper use (for example, turning the power off while loading data, etc.).
Some USB flash memory devices are equipped with a write-protect switch. To
prevent accidental erasure of important data saved in USB flash memory, slide
the write-protect switch on the device to the “protect” position. When saving
data, make sure that the write-protect switch is set to the “overwrite” position.
To connect the USB Flash Memory
Connect the USB Flash Memory device with the proper orientation; do not
force a wrong connection.
The playing songs copied to a USB flash memory from a computer
or other device, the songs must be stored either in the USB flash memory’s root
directory or a first-level/second-level folder in the root directory. Songs stored
in these location can be played as song data.
Songs stored in third-level-folders created inside a second-level folder cannot be
played by this instrument.
IMPORTANT
USB flash memory
Can be played.
Cannot be played.
Song
File
Song
File
Song
File
Song
Folder
Song
Folder
Song
Folder
(Root)
11
Specify the Song Track and Play the Song
H01 Owner’s Manual
ENGLISH
14
Specify the Song Track and Play the Song
When playing song data from a USB memory device, you can specify the song tracks in this setting.
The “ALL” setting plays back all 16 tracks, while “1+2” plays back tracks 1 and 2.
Since piano songs are generally recorded to tracks 1 and 2 exclusively, the “1+2” setting is best
used with only the piano voice.
Default setting is “1+2.”
Specify the track to all tracks (ALL)
While holding down [BGM] and [VOICE] buttons simultaneously, press the B6
key.
Specify the track to 1 and 2 tracks (1+2)
While holding down [BGM] and [VOICE] buttons simultaneously, press the C7
key.
Keep in mind that songs recorded on other devices may use a variety of voices
not available on this instrument and hence may sound different than the origi-
nal songs. In general, this instrument should be used to play back piano songs.
Tra ck 1 Track 2 Track 3
(ALL)
Piano voices
(1+2)
Other voices
B6
C7
12
Selecting & Playing Voices
H01 Owner’s Manual
ENGLISH
15
Selecting & Playing Voices
Selecting Voices
1. While holding down the [VOICE] button, press one
of the C1–A1 keys to select a voice.
While holding down the [VOICE] button, use the SELECT [-]/[+] buttons to
switch among the following ten voices. Pressing the [VOICE] button automati-
cally calls up the first voice, Grand Piano 1.
2. Adjust the volume.
Re-adjust the [MASTER VOLUME] slider for the most comfortable listening
level during your performance.
C0 C1 A1
TERMINOLOGY
Voice:
On the H01, the term “voice”
means “instrument sound.”
When you select a voice, an
appropriate reverb type will be
selected automatically (page 18).
NOTE
Key
Voice Name
Description
C1
Grand Piano
1
Recorded samples from a full concert grand piano. Also includes three
levels of dynamic sampling, sustain samples, and key-off samples for
exceptionally realistic acoustic grand piano sound. Perfect for classical
compositions as well as any other style that requires acoustic piano.
C
#
1
Grand Piano
2
Spacious and clear piano with bright reverb. Good for popular music.
D1
Piano
&
Strings
A Dual voice combining grand piano and strings – perfect for slow,
orchestral piano music.
D
#
1E.
Piano
1 An electronic piano sound created by FM synthesis.
Exceptional musical response with varying timbre according to key-
board dynamics. Good for standard popular music.
E1 E.
Piano
2 The sound of an electric piano using hammer-struck metallic tines. Soft
tone when played lightly, and an aggressive tone when played hard.
F1
Church
Organ
This is a typical pipe organ sound (8 feet + 4 feet + 2 feet).
Good for sacred music from the Baroque period.
F
#
1Jazz
Organ
The sound of a tonewheel type electric organ. Often heard in jazz and
rock idioms.
G1 Strings Stereo-sampled, large-scale strings ensemble with realistic reverb. Try
combining this voice with piano in the DUAL.
G
#
1
Harpsichord
The definitive instrument for baroque music. Since harpsichord uses
plucked strings, there is no touch response.
There is, however, a characteristic additional sound when the keys are
released.
A1
Vibraphone
Vibraphone played with relatively soft mallets. The tone becomes more
metallic the harder you play.
13
Selecting & Playing Voices
H01 Owner’s Manual
ENGLISH
16
Using the Pedals
The H01 has three foot pedals: damper
(right) pedal, sostenuto (center) pedal,
and soft (left) pedal that produce a
range of expressive effects similar to
those produced by the pedals on an
acoustic piano.
Damper (Right) Pedal
The damper pedal functions in the
same way as a damper pedal on an
acoustic piano. When the damper
pedal is pressed, notes sustain longer.
Releasing the pedal immediately stops
(damps) any sustained notes.
Sostenuto (Center) Pedal
If you play a note or chord on the key-
board and press the sostenuto pedal
while the note(s) are held, those notes
will sustain as long as you hold the
pedal (as if the damper pedal had
been pressed) but all subsequently
played notes will not be sustained.
This makes it possible to sustain a
chord, for example, while other notes
are played “staccato.
Soft (Left) Pedal
The soft pedal reduces the volume and slightly changes the timbre of notes
played while the pedal is pressed. The soft pedal will not affect notes that are
already playing when it is pressed.
If the damper pedal doesn’t work,
make sure that the pedal cord is
properly plugged into the main
unit (page 24).
NOTE
When you press the damper pedal
here, the notes you play before you
release the pedal sustain longer.
Organ and string voices will con-
tinue to sound for as long as the
sostenuto pedal is depressed.
NOTE
When you press the sostenuto
pedal here while holding the note,
the note will sustain as long as you
hold the pedal.
14
Selecting & Playing Voices
H01 Owner’s Manual
ENGLISH
17
Combining Voices (Dual)
You can play voices simultaneously across the entire range of the keyboard. In this way, you can
combine similar voices to create a thicker sound.
1. While holding down the [VOICE] button, press two
keys in the range of C1 through A1 simultaneously
(or press one key while holding another) to engage
Dual.
Refer to “Selecting Voices” on page 15 for more information on the voices that
are assigned to the keys.
The voice assigned to the lower key will be designated as Voice 1, and the voice
assigned to the higher key will be designated as Voice 2.
You can make the following settings for Voices 1 and 2 in Dual:
Setting the Octave
You can shift the pitch up and down in octave steps for Voice 1 and Voice 2 inde-
pendently. Depending on which voices you combine in Dual, the combination
may sound better if one of the voices is shifted up or down an octave.
While holding down the [VOICE] button, press one of the C5–F5 keys.
Setting the Balance
You can adjust the volume balance between two voices. For example, you can set
one voice as the main voice with a louder setting, and make the other voice softer.
While holding down the [VOICE] button, press one of the F#5–F#6 keys.
A setting of “0” produces an equal balance between the two Dual voices. Settings
below “0” increase the volume of Voice 2 in relation to Voice 1, and settings above
“0” increase the volume of Voice 1 in relation to Voice 2.
2. While holding down the [VOICE] button, press one
of the C1–A1 keys (or press the [VOICE] button) to
exit Dual and return to the normal single-voice play.
Reverb in Dual
The reverb type assigned to
Voice 1 will take priority. If the
reverb assigned to Voice 1 is set
to OFF, the reverb assigned to
Voice 2 will be in effect.
NOTE
Voice 1
C5 -1
Voice 2
D#5-1
C#50 E5 0
D5 +1 F5 +1
C0 C1 A1
Voice 1 Voice 2
C5 F5 C6 C7
F#5 (-6) F#6 (+6)
C5 C6 (0) C7
15
Selecting & Playing Voices
H01 Owner’s Manual
ENGLISH
18
Adding Variations to the Sound – Reverb
This control enables you to select four different types of reverb effect that add extra depth and
expression to the sound to create a realistic acoustic ambience.
Selecting a Reverb Type
While holding down the [VOICE] button, press one of the C2–E2 keys to select a
reverb type.
Adjusting Reverb Depth
While holding down the [VOICE] button, press one of the C3–G#4 keys to
adjust the reverb depth for the selected voice.
While holding down the [VOICE] button, press the A4 key to set the reverb to
the depth most suitable for the selected voice.
KeyReverb Type Description
C2 Room This setting adds a continuous reverb effect to the sound, similar to the
acoustic reverberation you would hear in a room.
C#2 Hall1 For a “bigger” reverb sound, use the HALL 1 setting. This effect simulates
the natural reverberation of a small-size concert hall.
D2 Hall2 For a truly spacious reverb sound, use the HALL 2 setting. This effect sim-
ulates the natural reverberation of a large concert hall.
D#2 Stage Simulates the reverb of a stage environment.
E2 Off No effect is applied.
C0 C1 C2 E2
Reverb depth range:
0 (no effect)–
20 (maximum depth)
NOTE
C0 C1 C2 C3 (Depth=0) C4 A4
G#4 (Depth=0)
The depth value increases as you press higher keys.
The default reverb type (including
OFF) and depth settings are dif-
ferent for each voice.
NOTE
16
Selecting & Playing Voices
H01 Owner’s Manual
ENGLISH
19
Transposition
The Transpose function makes it possible to shift the pitch of the entire keyboard up or down in
semitone intervals to facilitate playing in difficult key signatures, and to let you easily match the
pitch of the keyboard to the range of a singer or other instruments. For example, if you set the
transposition amount to “+5,” playing key C produces pitch F. In this way, you can play a song as
though it were in C major, and the H01 will transpose it to the key of F.
Setting the amount of transposition
While holding down the [BGM] and [VOICE] buttons, press one of the F#2–F#3
keys to set the desired amount of transposition.
To transpose the pitch down (in semitone steps)
While holding down the [BGM] and [VOICE] buttons, press any key between
F#2 and B2.
To transpose the pitch up (in semitone steps)
While holding down the [BGM] and [VOICE] buttons, press any key between
C#3 and F#3.
To restore the normal pitch
While holding down the [BGM] and [VOICE] buttons, press the C3 key.
Fine tuning of the Pitch
You can fine tune the pitch of the entire instrument. This function is useful when you play the
instrument along with other instruments or CD music.
Setting the Pitch
To raise the pitch
in about 1cent steps (100
cents = 1 semitone):
Hold down the A-1 and B-1
keys simultaneously and press
any key between C3 and B3.
To lower the pitch
in about 1cent steps (100
cents = 1 semitone):
Hold down the A-1 and A#-1
keys simultaneously and press
any key between C3 and B3.
To restore standard pitch:
Hold down the A-1, A#-1 and
B-1 simultaneously and press
any key between C3 and B3.
TERMINOLOGY
Transpose:
Changing the key signature. On
the H01, transposing shifts the
pitch of the entire keyboard.
Transposition range:
F#2 (-6 semitones)–
C3 (normal pitch)–
F#3 (+6 semitones)
NOTE
0-1
-2 +1 +3-4
-3-5 +2 +4 +5
-6 +6
C0 C1 C2
F#2F#3
Setting range: -65–+65 cents
The default setting (0 cent) is
A3=440Hz. In the 440Hz region,
1Hz=approximately 4 cents.
Pressing the key 8 times for
example, will set A3 at approxi-
mately 442Hz.
TERMINOLOGY
Default setting:
The “Default setting” refers to the
factory setting obtained when you
first turn on the power to the
instrument.
NOTE
A-1 B-1 C3 B3
C0 C1 C2
B3C3
A-1
A#-1
C0 C1 C2
C0 C1 C2
A-1 B-1 C3 B3
A#-1
17
Selecting & Playing Voices
H01 Owner’s Manual
ENGLISH
20
Touch Sensitivity
You can adjust the volume level that changes depending on how fast or strong you hit the keys.
The following four settings are available.
Setting the Touch Sensitivity Type
While holding down the [VOICE] button, press one of the A6–C7 keys to select
the desired touch sensitivity.
KeyTouch Sensitivity Description
A6 FIXED The volume level does not change at all regardless of whether you play
the keyboard soft or hard.
A#6 SOFT The volume level does not change much when you play the keyboard soft
or hard.
B6 MEDIUM This is the standard piano touch response (default setting).
C7 HARD The volume level changes very widely from pianissimo to fortissimo to
facilitate dynamic and dramatic expression. You have to hit the keys hard
to produce a loud sound.
The touch sensitivity settings may
have little or no effect with Church
Organ and Harpsichord voices
that are not normally responsive
to keyboard dynamics.
Default setting:
B6 (Medium)
NOTE
A6 C7
18
1 / 1

Yamaha H01 Uživatelský manuál

Kategorie
Digitální piana
Typ
Uživatelský manuál