Xiaomi Mi Robot Vacuum Mop 2 Pro Cleaner Uživatelský manuál

Mi Robot Vacuum-Mop 2 Pro User Manual · 01

Manual de usuario de Mi Robot Vacuum-Mop 2 Pro · 19

Manuel d’utilisation du MiRobotVacuum-Mop2Pro · 37

Manuale utente di Mi Robot Vacuum-Mop 2 Pro · 55

Руководство пользователя Робота-пылесоса MiRobotVacuum-Mop2Pro · 73

Odkurzacz z mopem Mi Robot 2 Pro — instrukcja obsługi · 92

Mi Staubsauger-Wischer-Roboter2 Pro Benutzerhandbuch · 110

Mi Temizlik Robotu 2 Pro Kullanım Kılavuzu · 128

Manual do utilizador do Aspirador robô com mopa Mi 2 Pro · 183

Посібник користувача Миючого робота-пилососа Mi2Pro · 201

Robotický vysavač smopem Mi 2 Pro – Uživatelská příručka · 219

Ρομποτική σκούπα - σφουγγαρίστρα Mi Robot 2 Pro Εγχειρίδιο χρήστη · 237

Aspirator și mop robotic Mi 2 Pro – Manual de utilizare · 257

Bruksanvisning för Mi robotdammsugare och -mopp 2 Pro · 275

ﻦﻣ تﻮﺑور ﺔﻴﺋﺎﺑﺮﻬﻛ ﺔﺴﻨﻜﻣو ﺔﺤﺴﻤﻣ مﺪﺨﺘﺴﻣ ﻞﻴﻟد

Pro 2 · 146

Mi

     · 164

Mi 2 Pro

Safety Instructions

Usage Restrictions

• This appliance can be used by children aged from 8 years and above and persons

with reduced physical, sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or instruction concerning use of

the appliance in a safe way and understand the hazards involved. Children shall

not play with the appliance. Cleaning and user maintenance shall not be made

by children without supervision.

• The appliance is only to be used with the power supply unit provided with the

appliance.

• This appliance contains baeries that are only replaceable by skilled persons.

• Please keep the cleaning brush out of reach of children.

• Keep hair, loose clothing, ﬁngers, and all parts of body away from openings and

moving parts.

• Do not use the vacuum-mop to clean any burning substances.

• Do not pick up the vacuum-mop by its laser radar cover.

• Make sure the vacuum-mop is turned oﬀ and the charging dock is unplugged

Read this manual carefully before use, and retain it for future reference.

This product is for ﬂoor cleaning in a home environment only. Do not use it

outdoors, on non-ﬂoor surfaces, or in a commercial or industrial seing.

01

before cleaning or performing maintenance.

• This vacuum-mop is only intended to clean ﬂoors in a home environment. Please

do not use it outdoors such as on an open balcony or on a surface that is not a

ﬂoor like a sofa, or in a commercial or industrial seing.

• Do not use the vacuum-mop in an area suspended above ground level, such as a

lo , open balcony, or on top of furniture, unless a protective barrier is present.

• Do not use the vacuum-mop at an ambient temperature above 35°C or below

0°C or on a ﬂoor with liquids or sticky substances.

• Pick up any cables from the ﬂoor before using the vacuum-mop to prevent it

from dragging them while cleaning.

• Pick up any fragile or loose items from the ﬂoor, such as vases or plastic bags, to

prevent the vacuum-mop from being obstructed or bumping into them and

causing damage.

• Do not place children, pets, or any item on top of the vacuum-mop while it is

stationary or moving.

• Do not use the vacuum-mop to clean the carpet.

• Do not allow the vacuum-mop to pick up hard or sharp objects such as building

materials, glass, or nails.

• Do not spray any liquid into the vacuum-mop (make sure the dust compartment

is thoroughly dry before its reinstalling).

• Do not place the vacuum-mop upside down (laser radar housing should never

touch the ground).

02

Baeries and Charging

• WARNING: Do not use any third-party baery. Use only with CDZ1SHW charging

dock.

• Do not aempt to disassemble, repair, or modify the baery or charging dock on

your own.

• Do not place the charging dock near a heat source.

• Do not use a wet cloth or wet hands to wipe or clean the dock’s charging

contacts.

• If the vacuum-mop won’t be used for an extended period, fully charge it, then

turn it oﬀ and store in a cool, dry place. Recharge the vacuum-mop at least once

every 3 months to avoid over-discharging the baery.

• The lithium-ion baery pack contains substances that are hazardous to the

environment. Before disposing of the vacuum-mop, please ﬁrst remove the

• Only use this product as directed in the user manual. Users are responsible for

any loss or damage arising from improper use of this product.

• This product's laser radar meets the IEC 60825-1:2014 Standard for Class 1 laser

product safety and does not produce laser radiation hazardous to the human

body.

03

Hereby, Xiaomi Communications Co., Ltd. declares that the radio equipment type

MJST1SHW is in compliance with Directive 2014/53/EU. The full text of the EU

declaration of conformity is available at the following internet address:

hp://www.mi.com/global/service/support/declaration.html

For detailed e-manual, please go to www.mi.com/global/service/userguide

baery pack, then discard, or recycle it in accordance with local laws and

regulations of the country or region it is used in.

• When removing the baeries from the product, it is beer to use up the

baeries and make sure your product is disconnected from power. Uninstall the

screw on the boom, then remove the cover.

• Unplug the baery connector, then remove the baeries. Do not damage the

baery case to avoid any risk of injuries.

• Return the baeries to a professional recycling organization.

04

Other Accessories

Cleaning Tool

Vacuum-Mop

Brush Brush Cover Side Brush

Accessories List

Pre-installed Accessories

Dust Compartment

Product Overview

Power CordCharging Dock

Note: Illustrations of product, accessories,

and user interface in the user manual are

for reference purposes only. Actual

product and functions may vary due to

product enhancements.

Water Tank (Mop pad installed,

for vacuuming & mopping mode)

Mop Pad

(Replacement)

Side Brush

(Replacement)

05

Edge Infrared Sensor

Collision Sensor

Power Buon

Dock Buon

Indicator

Cover

Charging Contacts

Laser Radar

(Laser Distance Sensor)

Indicator Status

Brush

Caster Wheel

Le Wheel/Right Wheel

Cliﬀ Sensors

Side Brush

Brush Cover

Power Buon

Dock Buon

Yellow Wi-Fi not connected

Breathing white Updating ﬁrmware/Charging (baery level ≥ 15%)

Blinking white Returning to the dock to charge

White Turned on/Working normally/Fully charged/Wi-Fi connected/Downloading ﬁrmware

Blinking yellow Low baery/Error/Awaiting Wi-Fi connection

Breathing yellow Charging (baery level < 15%)

Docking Sensor

Turn on/oﬀ: Press and hold for 3 seconds

Start/Pause: Press

Pause: Press when it is working

Start docking: Press when it is paused

Stop docking: Press when it is docking

06

Dust Compartment Release Buon

Dust Compartment Cover

Filter

Water Tank Release Buon

Water Tank Lid

Dust CompartmentVacuum-Mop

Water Tank (Used for Vacuuming & Mopping Mode)

Charging Dock (Place against a Wall)

Wi-Fi Indicator

Reset Buon

Staying blue for 2 seconds then

goes oﬀ: Wi-Fi connected

Blinking blue: Connecting to

Wi-Fi/Updating ﬁrmware

Blinking yellow: Awaiting Wi-Fi

connection

Press and hold for 3 seconds to

reset the system.

Press and hold for 10 seconds to

restore the system.

Signaling Area

Note: The water tank may contain a small amount of residual water due to quality

inspection. This is normal.

Note: The dust compartment must be installed for both vacuuming mode and

vacuuming & mopping mode, otherwise the vacuum-mop cannot be turned on.

Power Port

Charging Contacts

Water Filling Opening

Electrode Plate

07

Removing the protective strips

Installation

Charging

> 0.5 meters

> 1.5 meters > 0.5 meters

Placing the charging dock against a wall and connecting it to an

electrical outlet

Notes:

• Do not place the charging dock in an area with direct sunlight.

• Make sure there are more than 1.5 meters of clearance in front of the charging dock

and more than 0.5 meters on either side of it.

• Tidy up any loose power cord to prevent the vacuum-mop from geing tangled,

which could accidentally move or unplug the charging dock.

Notes:

• If the vacuum-mop cannot be turned on due to a low baery, put it against the

charging dock to charge.

• The vacuum-mop will automatically turn on when it is on the charging dock, and

cannot be turned oﬀ while charging.

• When using the vacuum-mop for the ﬁrst time, please follow the in-app prompts to

complete quick map creation. To ensure accurate mapping, it is recommended to

follow the vacuum-mop and remove any obstacles on the ground when it is creating

the map. Make sure the vacuum-mop starts from the charging dock.

• If the vacuum-mop may get stuck or scratch the surface of the furniture in some

areas, you can set restricted areas in the app to prevent the vacuum-mop from

entering those areas.

Before using the vacuum-mop, remove the protective strips from each side.

When using the vacuum-mop for the ﬁrst time, manually place it against

the charging dock to charge. Ensure that the charging contacts on both

the vacuum-mop and the charging dock are aligned. During daily use, you

can directly press the buon to send the vacuum-mop to the charging

dock to charge.

08

Open from here

Water Tank

Mop Pad

Vacuuming mode (install dust compartment):

Open the cover of the vacuum-mop, and install the dust

compartment into the vacuum-mop until it locks into place.

Vacuuming & mopping mode (install dust compartment, water tank, and mop

pad):

1. Slide the mop pad along the slot of the water tank, and then aach the

pad ﬁrmly onto the velcro.

2. Open the water tank lid, ﬁll the tank with water, and then reaach the lid.

It is strictly forbidden to immerse the water tank into water.

CAUTIONS:

• Do not rinse the water tank or immerse it in water. To avoid corrosion and damage, do

not use any detergent, disinfectant, solid cleaner, or other cleaning products on the

water tank.

• Do not add hot water to the water tank, as this may cause it to become deformed.

Velcro

Installing accessories for the desired mode

Note: Regularly cleaning the dust compartment can prevent dirt from building up.

Otherwise, the performance of the vacuum-mop may be reduced.

09

Connecting with Mi Home/Xiaomi

Home App

This product works with the Mi Home/Xiaomi Home app*. Use the Mi

Home/Xiaomi Home app to control your device, and to interact with other

smart home devices.

Scan the QR code to download and install the

app. You will be directed to the connection

setup page if the app is installed already. Or

search "Mi Home/Xiaomi Home" in the app

store to download and install it.

Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then

follow prompts to add your device.

* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of

the app displayed on your device should be taken as the default.

Notes:

• The version of the app might have been updated, please follow the instructions based

on the current app version.

• If the vacuum-mop's QR code cannot be scanned, you can search for its name to add

it.

• When connecting the vacuum-mop to the Mi Home/Xiaomi Home app using an iOS

device, follow the instructions in the app to connect to the vacuum-mop's hotspot

"ĳai-vacuum-v3_miapXXXX".

Notes:

• Before using, wipe the electrode plates of the water tank clean with a dry cloth.

• When mopping, set up virtual walls or restricted areas for the carpeted areas.

• Make sure the water tank is installed correctly, otherwise the vacuum-mop may spin

in circles or have diﬃculty crossing obstacles.

3. Slide the water tank horizontally into the boom of the vacuum-mop

until it clicks into place.

10

How to Use

Sleep mode

The vacuum-mop will automatically enter the sleep mode if it does not

work or be operated for more than 5 minutes in the non-charging state.

Press any buon or use the app to wake it up. The vacuum-mop will

automatically turn oﬀ if it is in sleep mode for more than 6 hours.

Note: The vacuum-mop will not enter sleep mode while on the charging dock.

Resuming the cleanup

The vacuum-mop has the feature of resuming the cleanup. If the

vacuum-mop starts running low on baery during a cleaning task, it will

automatically return to the charging dock to charge. Once the

vacuum-mop is fully charged, it will resume the cleanup where it le oﬀ. If

the cleanup is manually ended or if you move or operate the vacuum-mop

when it is being charged or returning to the charging dock, the cleanup

will not be resumed.

Returning to the dock to charge

When the vacuum-mop is on, press the buon to send the vacuum-mop

to the charging dock to charge. The vacuum-mop will automatically return

to the dock aer ﬁnishing a cleaning task, and the indicator will blink

white. If the vacuum-mop starts running low on baery while cleaning, it

will automatically return to the dock to charge and resume the cleaning

where it le oﬀ once it is fully charged.

Turning on/oﬀ

Press and hold the buon for 3 seconds until the indicator lights up,

and the vacuum-mop is turned on. When the vacuum-mop is paused and

not being charged, press and hold the buon for 3 seconds to turn it

oﬀ.

Vibrating mopping mode

When mopping, the vibrating mopping mode is enabled by default to

enhance the mopping eﬀect, and can beer remove water stains

compared with the standard mopping mode. This mode can be disabled

in the app. Once disabled, the vacuum-mop will switch to the standard

mopping mode.

Vacuuming or vacuuming & mopping

Turn the vacuum-mop on, and press the buon . Then the vacuum-mop

will automatically enter the vacuuming mode or vacuuming & mopping

mode according to the installed accessories.

Quick map creation

When turning on the vacuum-mop for the ﬁrst time, there is no map

available in the app. Place the vacuum-mop against the charging dock,

and then select "Quick map creation" in the app. The vacuum-mop will

begin to create a map without cleaning, and then it will automatically

return to the charging dock to complete and save the map.

Note: During the map creation process, do not move the vacuum-mop, and keep it

out of reach of children and pets.

Pausing

When the vacuum-mop is working, press any buon to pause it, and

press the buon to resume the cleaning. Press the buon to

end the current cleaning and send the vacuum-mop back to the charging

dock.

Adding water or cleaning mop pad during cleanup

If you need to add more water to the water tank or clean the mop pad

during a cleaning task, press any buon to pause the vacuum-mop. Then

you can remove the water tank to add water or clean the mop pad. Aer

adding water or cleaning the mop pad, reinstall the water tank and mop

pad, and press the buon to resume the cleaning.

11

Reseing Wi-Fi

When switching to a new router or changing your Wi-Fi password, you will

need to reset the vacuum-mop's Wi-Fi connection. To do so, turn on the

vacuum-mop, then simultaneously press and hold the buons and

for 7 seconds until you hear a voice saying "Reseing the Wi-Fi connection

and entering network conﬁguration mode". Once the Wi-Fi connection is

reset, you can reconnect the vacuum-mop.

Note: Only 2.4 GHz Wi-Fi networks are supported.

Cleaning up all areas

If you choose to clean up all areas when no map is saved, the vacuum-mop

will clean square-shaped areas of 6 × 6 meters one by one. Aer a map has

been saved in the app and you select to clean up all areas, the vacuum-mop

will automatically clean each room according to the planned route. And it

will return to the charging dock aer the cleaning is completed.

Saving maps

Aer the vacuum-mop quickly creates a map or returns to the charging

dock to charge aer completing a cleaning task, the updated map will be

automatically saved in the Mi Home/Xiaomi Home app. Once a map has

been created, you can use the app to split or merge areas, or customize

room names.

Edge cleanup

Aer you select the edge cleanup in the app, the vacuum-mop will

automatically identify the area to be cleaned and clean along the edges.

Aer cleaning, the vacuum-mop will automatically return to the charging

dock to charge.

Zoned cleanup

You can set up a zoned cleanup in the app, and the vacuum-mop will clean

the areas you select.

Note: Zoned cleanup cannot completely keep the vacuum-mop inside the selected

areas during cleaning. Remove any obstacles around the areas prior to cleaning in

case the vacuum-mop goes out of the selected areas.

Clean there

You can use the clean there feature in the app to set a target point on the

map. The vacuum-mop will automatically navigate to the target point and

clean a square-shaped area of 2 × 2 meters with the target point as the

center.

Selecting modes/water levels

You can select diﬀerent modes and water levels in the Mi Home/Xiaomi

Home app.

Do not disturb (DND) mode

In DND mode, the vacuum-mop will not resume the cleanup, perform

scheduled cleanup, or issue voice alerts. DND mode is enabled by default

from 11:00 p.m. to 9:00 a.m. and can be disabled in the app.

Note: In DND mode, the vacuum-mop's indicator will go oﬀ aer the vacuum-mop

being charged for 1 minute.

Reseing/Restoring the system

To reset the system: Use a pin to press and hold the reset buon for 3

seconds until you hear a voice saying "System reset successfully". Then

the vacuum-mop will automatically restart, and the seings such as

scheduled cleanup and Wi-Fi connection will be restored to their original

factory seings.

To restore the system to the previous ﬁrmware version: Use a pin to press

and hold the reset buon for 10 seconds until you hear a voice saying

"System restored successfully". Then the vacuum-mop will automatically

restart, and the seings such as scheduled cleanup and Wi-Fi connection

will be restored to their original factory seings.

Note: Aer reseing or restoring the system, the vacuum-mop needs to be

reconnected to the app, and the relevant seings in the app will be cleared.

12

Scheduled cleanup

You can schedule cleaning times in the app. The vacuum-mop will

automatically start cleaning at the scheduled times, and return to the

charging dock aer the cleaning is completed.

Note: If the DND mode is enabled, the vacuum-mop will not perform the scheduled

cleanups during the do-not-disturb periods.

Virtual walls/restricted areas

You can set up virtual walls and restricted areas in the app to prevent the

vacuum-mop from entering the areas that need not be cleaned.

Notes:

• Before using this feature, a map must be saved in the app.

• Moving the vacuum-mop or signiﬁcantly changing the layout of your home may

invalidate the saved maps and make the virtual walls and restricted areas lost.

1. Open the cover of the vacuum-mop, and press the dust compartment

release buon to remove the dust compartment.

2. Open the dust compartment cover, and empty out the contents.

Care & Maintenance

Dust Compartment

Release Buon

13

3. Remove the ﬁlter, and use the cleaning tool to clean the dust

compartment and the ﬁlter, and then wash them with clean water.

Install the dust compartment and the ﬁlter back aer fully drying them.

Simultaneously press and hold both the release buons of the water tank,

and then slide it out from the boom of the vacuum-mop as illustrated.

Note: It is recommended to thoroughly clean the dust compartment at least once a

week. Make sure to fully dry the dust compartment and the ﬁlter before use (at least

dry them for 24 hours).

Note: Aer mopping, immediately remove the water tank, empty out any remaining

water, and clean and dry the mop pad to prevent lingering odor and mildew.

Water Tank

Water Tank Release Buon

Brush

1. Flip the vacuum-mop over and press and hold the two release buons to

remove the brush cover.

2. Remove the brush upwards.

3. Pull out the brush bushing.

4. Rotate the brush holders until the alignment mark on each holder is

aligned with the unlocking mark, and then remove the brush holders

from both ends of the brush.

5. Use the blade of the cleaning tool to cut the hair tangled on the brush

and thoroughly clean the brush.

6. Reinstall the brush holders and the brush bushing.

7. Reinstall the brush and the brush cover, and press the brush cover

securely into place.

Brush Cover

Release Buon

Brush

Brush Bushing

Brush Holders

Locking Mark

Unlocking Mark

Alignment Mark

Locking Mark

Unlocking Mark

Alignment Mark

14

Cleaning the brush

Cut hair Remove dirt and debris

Note: It is recommended to replace the brush every 6–12 months for an optimal

cleaning eﬀect.

Side Brush

Caster Wheel

1. Flip the vacuum-mop over and remove the screw that secures the side

brush in place.

2. Remove and clean the side brush.

3. Reinstall the side brush and tighten the screw.

1. Flip the vacuum-mop over and remove the caster wheel upwards.

2. Clean any hair, dirt, and debris from the caster wheel.

3. Reinstall the caster wheel.

Note: It is recommended to replace the side brush every 3–6 months for an optimal

cleaning eﬀect.

Use a so, dry cloth to periodically clean the cliﬀ sensors and the edge

infrared sensor.

Note: Do not use chemicals such as detergents or sprays to clean the sensors.

Cliﬀ Sensors

Sensors

Edge Infrared Sensor

15

FAQ

Issue Solution Issue Solution

The baery level is low. Recharge the

vacuum-mop, and try again.

There are too many obstructions around the

charging dock. Place the charging dock in a

more open area.

The vacuum-mop is too far away from the

charging dock. Move it closer to the charging

dock and try again.

The vacuum-mop

cannot return to the

dock to charge.

The vacuum-mop is

malfunctioning.

The vacuum-mop

makes unusual

sounds.

The vacuum-mop

cleans less

eﬃciently or leaves

dust behind.

The vacuum-mop

is oﬄine.

The vacuum-mop

cannot be turned on.

The vacuum-mop

cannot start cleaning.

The vacuum-mop cannot

resume the cleanup.

The vacuum-mop cannot

be charged.

The vacuum-mop does

not perform the

scheduled cleanup.

The vacuum-mop cannot

be connected to the Mi

Home/Xiaomi Home app.

The vacuum-mop

keeps going oﬄine.

A foreign object might be caught in the brush,

side brush, or the le/right wheel. Turn oﬀ the

vacuum-mop and remove any debris.

The Wi-Fi signal is weak. Make sure the

vacuum-mop is in an area with good Wi-Fi

coverage.

Something is wrong with the Wi-Fi connection.

Reset the Wi-Fi and download the latest

version of the app, and try reconnecting.

Make sure there is enough open space

around the charging dock and its charging

contacts are free of dust and other debris.

The ambient temperature is too low (below

0°C) or too high (above 35°C).

Make sure the vacuum-mop is connected

to the network and stays in the range of

Wi-Fi at all times.

Make sure the charging dock and the

vacuum-mop are in the range of Wi-Fi and

have a good signal. Follow the instructions in

the user manual to reset the Wi-Fi

connection and try to reconnect the

vacuum-mop.

The dust compartment is full, please empty its

contents.

The ﬁlter is blocked, please clean it.

A foreign object is caught in the brush, please

clean it.

Make sure the vacuum-mop is not in DND

mode, as this mode will prevent it from

resuming the cleaning.

Make sure you are not using the app to send

the vacuum-mop back to the charging dock,

or press the dock buon, or move the

vacuum-mop back to the charging dock, as

these operations will stop the vacuum-mop

from resuming the cleanup.

Make sure the vacuum-mop is connected to

the network, otherwise it cannot

synchronize time and perform the

scheduled cleanups.

Make sure the vacuum-mop is not in DND

mode, as this mode will prevent it from

performing a scheduled cleanup.

The baery level is low. Recharge the

vacuum-mop, and try again.

Turn oﬀ the vacuum-mop, and then turn it on

again.

16

Troubleshooting

Error Message Solution Error Message Solution

Please make sure the

laser distance sensor is

not blocked before

starting.

Clear any foreign objects which may block

or obstruct the laser distance sensor, or

move the vacuum-mop to a new location

to start.

Please wipe the cliﬀ

sensor clean and

move the

vacuum-mop to a

new location to start.

Please clear any foreign

objects from the

collision sensor.

The collision sensor may be stuck. Gently

tap it several times to remove any foreign

objects. If nothing falls out, move the

vacuum-mop to a diﬀerent location to start.

Please move the

vacuum-mop to a

level surface to start.

Please place the

vacuum-mop on the

ﬂoor to start.

Please help remove the

obstacles around the

vacuum-mop and try

again.

Please wipe the

infrared sensor along

the edge.

Please make sure the

water tank is installed.

Please return the

vacuum-mop to the

dock to charge.

Baery level is too low,

please charge.

Please make sure the

dust compartment is

installed.

Install the dust compartment and the

ﬁlter, and make sure they are secured in

place.

Install the water tank and make sure it

clicks into place.

The vacuum-mop cannot sense the

charging dock's location. Place the

vacuum-mop back to the charging dock.

The vacuum-mop cannot be turned on

normally due to a low baery. Place the

vacuum-mop back to the dock to charge.

The edge infrared sensor may be dirty,

wipe it clean and try again.

A wheel may be oﬀ the ground.

Re-position the vacuum-mop and start it.

The vacuum-mop may be caught or stuck.

Clear away any obstructions around it.

The vacuum-mop is tilted at startup. Move

the vacuum-mop to a level surface and

restart it. You can also reset the level of

vacuum-mop in the app, and then restart it.

Part of the vacuum-mop may be oﬀ the

ground, re-position the vacuum-mop and

then restart it. The cliﬀ sensors may be

dirty, wipe them clean and try again.

17

When there is an error occurred, you will hear a voice alert. Please refer to the corresponding voice message in the

table to ﬁnd your solution.

CDZ1SHW

100–240 V~ 50/60Hz 0.8 A

20 V 1.8 A

150 × 80.5 × 101 mm

Speciﬁcations

Charging Dock

Vacuum-Mop

Name

Model

Item Dimensions

Rated Power

Rated Voltage

Charging Voltage

Net Weight

Wireless Connectivity

Operation Frequency

Maximum Output Power

Robotic Vacuum Cleaner

MJST1SHW

φ 353 × 96.5 mm

35.6 W

14.4 V

20 V

3.6 kg

Wi-Fi IEEE 802.11b/g/n 2.4 GHz

2400–2483.5 MHz

<20 dBm

Model

Rated Input

Rated Output

Item Dimensions

Under normal use of condition, this equipment should be kept a separation

distance of at least 20 cm between the antenna and the body of the user.

WEEE Information

All products bearing this symbol are waste electrical and

electronic equipment (WEEE as in directive 2012/19/EU) which

should not be mixed with unsorted household waste. Instead,

you should protect human health and the environment by

handing over your waste equipment to a designated collection

point for the recycling of waste electrical and electronic

equipment, appointed by the government or local authorities.

Correct disposal and recycling will help prevent potential

negative consequences to the environment and human health.

Please contact the installer or local authorities for more

information about the location as well as terms and conditions

of such collection points.

User Manual Version: V1.0

18

4800 mAh (rated capacity)

5200 mAh (nominal capacity)

Baery Capacity

Stránka se načítá ...

Xiaomi Mi Robot Vacuum Mop 2 Pro Cleaner Uživatelský manuál

Xiaomi Mi Robot Vacuum Mop 2 Pro Cleaner Uživatelský manuál

v jiných jazycích