Yamaha CDX-593MKII Uživatelský manuál

Značka: Yamaha

Modelka: CDX-593MKII

Kategorie: CD přehrávače

Typ: Uživatelský manuál

CARACTERISTIQUES

• Lecture programmable à accès aléatoire

• Lecture en séquence aléatoire

• Lecture répétée de plage unique/disque entier

• Fonction d’espacement automatique

• Programmation automatique de pour

l’enregistrement sur bande

• Fonction de recherche automatique du niveau

de crête

• Enregistrement synchronisé de CD avec un

magnétophone à cassette compatible

YAMAHA

• Fonction de modification de luminosité de

l’affichage

• Fonctionnement par télécommande

• CDX-593

Sorties numérique optique et sortie

numérique coaxiale

• CDX-493 et 393MKII

Sortie numérique optique

CDX-593/493/393MK

Compact Disc Player

Lecteur Compact Disque

Thank you for selecting this YAMAHA Compact Disc Player.

Nous vous remercions d’avoir porté votre choix sur ce lecteur

de disque audionumérique YAMAHA.

OWNER’S MANUAL

FEATURES

• Random Access Programmable Play

• Random-Sequence Play

• Single Track/Entire Disc Repeat Play

• Automatic Spacing Capability

• Automatic Programming for Recording to

Tape

• Automatic Peak Level Searching Capability

• CD Synchronized Recording with a

Compatible YAMAHA Tape Deck

• Adjustable Display Brightness

• Remote Control Capability

• CDX-593

Optical and Coaxial Digital Outputs

• CDX-493 and 393MKII

Optical Digital Output

MODE D’EMPLOI

CONTENTS

Safety Instructions................................................2

Connections .........................................................4

Identification of Components................................6

Basic Operation....................................................8

Random-Sequence Play ....................................12

Repeat Play........................................................12

Program Play......................................................13

Index Search ......................................................14

Track Programming for Recording to Tape .........15

CD Synchronized Recording..............................19

Notes about the Remote Control

Transmitter .........................................................20

Notes about Handling Compact Discs ...............20

Troubleshooting ..................................................21

Specifications .....................................................22

TABLE DES MATIERES

Attention ...............................................................3

Connexions ..........................................................4

Identification des composants..............................6

Fonctionnement de base......................................8

Lecture en séquence aléatoire...........................12

Lecture répétée ..................................................12

Lecture programmée..........................................13

Recherche d’index .............................................14

Programmation des plages pour

enregistrement sur bande ..................................15

Enregistrement synchronisé d’un CD.................19

Remarques concernant la télécommande .........20

Remarques concernant la manipulation des disques

compacts......................................................................

Dépistage de pannes .........................................21

Caractéristiques techniques...............................22

U C A

SAFETY INSTRUCTIONS

• Explanation of Graphical Symbols

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert you to the

presence of uninsulated “dangerous

voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert

you to the presence of important

operating and maintenance

(servicing) instructions in the literature

accompanying the appliance.

WARNING

TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE THIS

UNIT TO RAIN OR MOISTURE.

1 Read Instructions – All the safety and operating

instructions should be read before the unit is operated.

2 Retain Instructions – The safety and operating instructions

should be retained for future reference.

3 Heed Warnings – All warnings on the unit and in the

operating instructions should be adhered to.

4 Follow Instructions – All operating and other instructions

should be followed.

5 Water and Moisture – The unit should not be used near

water – for example, near a bathtub, washbowl, kitchen

sink, laundry tub, in a wet basement, or near a swimming

pool, etc.

6 Carts and Stands – The unit should be used only with a

cart or stand that is recommended by the manufacturer.

6A A unit and cart combination should be

moved with care. Quick stops, excessive

force, and uneven surfaces may cause the

unit and cart combination to overturn.

7 Wall or Ceiling Mounting – The unit should

be mounted to a wall or ceiling only as

recommended by the manufacturer.

8 Ventilation – The unit should be situated so that its location

or position does not interfere with its proper ventilation.

For example, the unit should not be situated on a bed,

sofa, rug, or similar surface, that may block the ventilation

openings; or placed in a built-in installation, such as a

bookcase or cabinet that may impede the flow of air

through the ventilation openings.

9 Heat – The unit should be situated away from heat

sources such as radiators, stoves, or other appliances that

produce heat.

10 Power Sources – The unit should be connected to a power

supply only of the type described in the operating

instructions or as marked on the unit.

11 Power-Cord Protection – Power-supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying

particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the unit.

12 Cleaning – The unit should be cleaned only as

recommended by the manufacturer.

13 Nonuse Periods – The power cord of the unit should be

unplugged from the outlet when left unused for a long

period of time.

14 Object and Liquid Entry – Care should be taken so that

objects do not fall into and liquids are not spilled into the

inside of the unit.

15 Damage Requiring Service – The unit should be serviced

by qualified service personnel when:

A. The power-supply cord or the plug has been damaged;

B. Objects have fallen, or liquid has been spilled into the

unit; or

C. The unit has been exposed to rain; or

D. The unit does not appear to operate normally or

exhibits a marked change in performance; or

E. The unit has been dropped, or the cabinet damaged.

16 Servicing – The user should not attempt to service the unit

beyond those means described in the operating

instructions. All other servicing should be referred to

qualified service personnel.

17 Power Lines – An outdoor antenna should be located away

from power lines.

18 Grounding or Polarization – Precautions should be taken

so that the grounding or polarization is not defeated.

We Want You Listening For A Lifetime

(for US customers only)

YAMAHA and the Electronic Industries Association’s Consumer

Electronics Group want you to get the most out of your

equipment by playing it at a safe level. One that lets the sound

come through loud and clear without annoying blaring or

distortion – and, most importantly, without affecting your

sensitive hearing. Since hearing damage from loud

sounds is often undetectable until it is too late,

YAMAHA and the Electronic Industries Association’s

Consumer Electronics Group recommend you to

avoid prolonged exposure from excessive volume

levels.

IMPORTANT!

Please record the serial number of this unit in the space

below.

Model:

Serial No.:

The serial number is located on the rear of the unit.

Retain this Owner’s Manual in a safe place for future

reference.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

English

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT

1 To ensure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2 Install your unit in a cool, dry, clean place – away from

windows, heat sources, vibration, dust, moisture, or cold.

To avoid humming sounds, locate the unit away from other

electrical appliances, motors, and transformers. To prevent

fire or electrical shock, do not expose to rain and water.

3 Do not operate the unit upside-down. It may overheat,

possibly causing damage.

4 Never open the cabinet. If a foreign object drops into the

set, contact your dealer.

5 Do not use force on switches, knobs or cords. When

moving the set, first turn the unit off. Always disconnect the

cords from the AC outlet or other equipment by pulling the

plug itself; never pull on the cord.

6 Do not clean the unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

7 Be sure to read the “TROUBLESHOOTING” section on

common operating errors before concluding that your unit

is faulty.

8 Do not place another component on top of this unit, as

damage or discoloration on the surface of the unit may

result.

9 To prevent damage by lightning, disconnect the power

cord from the AC outlet during an electrical storm.

10 When disconnecting the power cord from the AC outlet,

grasp the plug; do not pull the cord.

11 Voltage selector (General model only)

The voltage selector (on the rear panel of this unit) must

be correctly set to the voltage used locally before making

any connection to the AC power supply.

WARNING

CAUTION

Use of controls or adjustments or performance of

procedures other than those specified herein may result in

hazardous radiation exposure.

DANGER

Invisible laser radiation when open and interlock failed or

defeated.

Avoid direct exposure to beam.

As the laser beam used in this compact disc player is harmful

to the eyes, do not attempt to disassemble the cabinet. Refer

servicing to qualified personnel only.

To avoid electrical shock, do not open the unit. Refer servicing

to qualified personnel only.

DANGER: The use of optical instrument with this product will

increase eye hazard.

Laser Diode Properties

• Material: GaAlAs

• Wavelength: 780 nm

• Emission Duration: continuous

• Laser Output: max. 44.6 µW*

* This output is the value measured at a distance of about

200 mm from the objective lens surface on the Optical Pick-

up Block.

FCC INFORMATION (for US customers only)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions

contained in this manual, meets FCC requirements.

Modifications not expressly approved by Yamaha may void your

authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/

or another product use only high quality shielded cables. Cable/

s supplied with this product MUST be used. Follow all

installation instructions. Failure to follow instructions could void

your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with

the requirements listed in FCC Regulations, Part 15 for Class

“B” digital devices. Compliance with these requirements

provides a reasonable level of assurance that your use of this

product in a residential environment will not result in harmful

interference with other electronic devices.

This equipment generates/uses radio frequencies and, if not

installed and used according to the instructions found in the

users manual, may cause interference harmful to the operation

of other electronic devices.

Compliance with FCC regulations does not guarantee that

interference will not occur in all installations. If this product is found

to be the source of interference, which can be determined by

turning the unit “OFF” and “ON”, please try to eliminate the problem

by using one of the following measures:

Relocate either this product or the device that is being affected by

the interference.

Utilize power outlets that are on different branch (circuit breaker or

fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead, change the

lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results,

please contact the local retailer authorized to distribute this type of

product. If you can not locate the appropriate retailer, please

contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave,

Buena Park, CA 90620.

The above statements apply ONLY to those products distributed by

Yamaha Corporation of America or its subsidiaries.

CAUTION (FOR CANADA MODEL)

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE

OF PLUG TO WIDE SLOT AND FULLY INSERT.

FOR CANADIAN CUSTOMER

THIS CLASS B DIGITAL APPARATUS MEETS ALL

REQUIREMENTS OF THE CANADIAN INTERFERENCE-

CAUSING EQUIPMENT REGULATIONS.

CONNECTIONS

• Before making any connections, switch OFF the power to the

unit and the amplifier or other components.

• Connections should be made to the correct input terminals of

the amplifier or other components.

• If the placement of this unit creates interference (noise) in

other equipment, such as a tuner, relocate this unit away

from the affected equipment.

CDX-593

LINE OUT DIGITAL AUDIO OUT

OPTICAL COAXIAL

CD DIGITAL IN

OPTICAL

COAXIAL

CDX-593

To AC outlet

Connection cord

(included)

Optical fiber cable

(not included)

Connection cord

(not included)

CDX-493

CD DIGITAL IN

OPTICAL

LINE OUT

DIGITAL

AUDIO

OUT

OPTICAL

CDX-493

To AC outlet

Optical fiber cable

(not included)

Connection cord

(included)

Amplifier

English

CDX-393MKII

To AC outlet

Connection cord

(included)

Amplifier

To connect this unit to your amplifier, choose one of the following procedures:

1 When the LINE OUT (analog) terminals of

this unit are used

• Be sure that the left (“L”) and right (“R”) LINE OUT

terminals are connected to the corresponding (left and

right) terminals of the amplifier or other component.

• Connect the “LINE OUT” terminals to the “CD” (or “AUX”)

terminals of the amplifier. If the amplifier does not have

such terminals, use the “TAPE PB” terminals. For

additional details concerning these connections, refer to

the operation instructions for the amplifier being used.

• The LINE OUT terminals of this unit are numbered 1.

When connecting this unit with a YAMAHA amplifier or

receiver whose terminals on the rear panel are

numbered as 1, 2, 3, etc., connect the LINE OUT

terminals of this unit to the input terminals numbered 1

on the rear of the amplifier or receiver.

2 When the DIGITAL OUT (OPTICAL) terminal

of this unit is used

• Before using this terminal, remove the terminal’s cover.

• Make the connection from this terminal to the optical

input terminal of an amplifier by using a commercially

available optical fiber cable.

* Use an optical fiber cable that conforms to EIAJ

standards. Other cables might not function correctly.

• Be sure to replace the terminal’s cover when this

terminal is not being used, in order to protect the

terminal from dust.

• This terminal can also be connected to the optical input

terminal of a digital audio tape deck (DAT) etc. to record

CD onto a tape directly.

CDX-593 and CDX-493

• The signal output level to an amplifier can be adjusted by

using the OUTPUT LEVEL button.

3 CDX-593

When the DIGITAL OUT (COAXIAL) terminal

of this unit is used

• Make the connection from this terminal to the digital

input terminal of an amplifier by using a connection cord.

• The signal output level to an amplifier can be adjusted by

using the OUTPUT LEVEL button.

CD DIGITAL IN

OPTICAL

LINE OUT

DIGITAL

AUDIO

OUT

OPTICAL

Optical fiber cable

(not included)

POWER

SKIP/SEARCH

OPEN/CLOSE

AUTO

DISPLAY OFF

OUTPUT LEVEL

PHONES

101234567890

IDENTIFICATION OF COMPONENTS

FRONT PANEL

• The control functions on the main unit and on the remote

control transmitter are virtually identical, with the exceptions

below.

( ) indicates the page number on which the control part is best described.

• (PLAY/PAUSE) button on the main unit has both the

functions of the PLAY button and the PAUSE button on the

remote control transmitter.

• The SKIP/SEARCH button on the main unit has both the

functions of the SKIP button and the SEARCH button on the

remote control transmitter.

CDX-593, CDX-493

POWER switch (p. 8)

CDX-393MKII

SKIP/SEARCH

POWER

OPEN/CLOSE

101234567890

PHONES jack (p. 11)

Display panel

Disc Tray (p. 8)

Remote control sensor (p. 20)

POWER switch (p. 8)

Display panel

Disc Tray (p. 8)

Remote control sensor (p. 20)

SKIP/SEARCH button (p. 9,10)

AUTO DISPLAY OFF indicator

CDX-593 only (p. 11)

SKIP/SEARCH button (p. 9,10)

English

REMOTE CONTROL TRANSMITTER

* The CDX-593 is used for illustration purposes in this manual. Any difference in the operation of other models is clearly indicated in

this instruction (for example, “CDX-593 only”).

This manual describes how to operate this unit by using the remote control transmitter. To operate this unit from the front panel, use

the corresponding buttons on the front panel.

SPACE TAPEPEAK

SYNCHRO

INDEX

PROGCLEAR

OPEN/

87 9 0

54 6 +I0

DIMMER TIME

REPEAT RANDOM

SKIP

OUTPUT LEVEL

–+

STOP PAUSE PLAY

DIMMER button (p. 11)

TIME button (p. 10)

OPEN/CLOSE button (p. 8)

CLEAR button (p. 14)

PROG (program) button (p. 13)

INDEX button (p. 14)

RANDOM button (p. 12)

SEARCH button (p. 10)

SKIP button (p. 9)

PLAY button (p. 8)

PAUSE button (p. 9)

TAPE button (p. 15)

SYNCHRO button (p. 19)

PEAK button (p. 18)

SPACE button (p. 10)

Number buttons (p. 9)

REPEAT button (p. 12)

OUTPUT LEVEL button (p. 11)

CDX-593 and CDX-493 only

STOP button (p. 9)

BASIC OPERATION

SPACE TAPEPEAK

SYNCHRO

INDEX

PROGCLEAR

OPEN/

87 9 0

54 6

DIMMER TIME

REPEAT RANDOM

SKIP

OUTPUT LEVEL

–+

STOP PAUSE PLAY

2, 3

1 Turn the power on.

POWER

2 Load a disc.

OPEN/

Disc tray

Label side up

3 Close the disc tray.

OPEN/

PLAY

Play will begin from the first track of the disc.

Display information during disc play

3 4 5 6 7 8 9 10 11 12

SINGLE

1 Shows the track number selected or being played.

2 Shows the time displays. (Refer to “Selecting time displays”

on page 10.)

3 CDX-593 and CDX-493

Shows the signal output level to an amplifier or the

headphones, adjusted by using the OUTPUT LEVEL

button.

4 Displays the CD track numbers (up to 20). After each track

is played, its corresponding number disappears so that

remaining track numbers can be seen at a glance.

Notes

• After closing the disc tray by pressing the OPEN/CLOSE

button, the display shows the total number of tracks and the

total recorded time of the disc for a few seconds.

1 2 3 4 5 6 7 8 9 10 11 12

TOTAL

• You can also close the disc tray by pressing the PLAY button

(or

button on the front panel), a number button, the

RANDOM button, or by pressing the front edge of the disc

tray gently. If the tray is closed in any of these ways, play will

begin automatically, however, the display will not show the

total number of tracks and the total recorded time of the disc.

To turn off the power

Press the POWER switch again.

* If you turn on the power again with a CD in the tray, you can

start playing the CD automatically.

POWER

English

To stop play temporarily To stop play completely

PAUSE

STOP

To resume play, press the PAUSE button again (or press the

PLAY button).

* button on the front panel can also be used to stop

play temporarily or to resume play.

To play a desired track on the disc

DIRECT PLAY

Select a desired track using the number buttons.

1 2 3 4 5 6 7 8 9

The selected track

number is displayed.

Example: To select track 25,

Press the number 10 button twice, then press the number 5

button once.

+I0

(twice)

* If you enter a number that is higher than the last track

number on the disc, the final track is played.

Caution

When the disc tray is open, do not touch the inside gear

wheel. If you touch the gear wheel, your finger may be

caught in the closing tray and injured.

Gear wheel

SKIP PLAY

To skip to a succeeding track, press the SKIP button once

or repeatedly until the desired track number appears.

SKIP

To skip to the beginning of the current track, press the

SKIP

button once.

SKIP

To skip to a preceding track, press the SKIP button

repeatedly until the desired track number appears.

SKIP

• These operations can also be performed when the unit is in

the pause or stop mode.

• When using the SKIP button on the remote control

transmitter:

If the button is pressed and held, the track number

continuously changes to higher numbers (or lower

numbers).

• When using the SKIP/SEARCH button on the front panel:

Be careful not to press and hold the button, otherwise the

selected track is played forward (or backward) rapidly.

To advance or reverse play rapidly (MANUAL SEARCH)

To advance rapidly

(Press and hold.)

To reverse rapidly

(Press and hold.)

• The sound can be heard (although slightly garbled) during

manual search in either direction. This is convenient for

locating a precise position within a track, or for reviewing the

contents quickly.

• Manual search can also be performed while disc play is

paused, though no sound will be heard.

• When using the SKIP/SEARCH button on the front panel:

Be careful not to release the button just after it is pressed,

otherwise the play is skipped to the beginning of the next

track or returned to the beginning of the current track.

2 3 4 5 6 7 8 9 10 11 12

REMAIN

2 3 4 5 6 7 8 9 10 11 12

TOTAL

REMAIN

2 3 4 5 6 7 8 9 10 11 12

TOTAL

TIME

Selecting time displays

You can select any of the four time displays by pressing the TIME display mode-select button.

1 Elapsed time of the track now playing

2 Remaining time of the track now playing

4 Total remaining time on the disc

3 Total disc play time

Note

The remaining time 2 will not be displayed if the track number

is 25 or higher.

Automatic spacing

If you record a disc onto tape with an insufficient time space

between tracks, the tape deck will not be able to perform blank

search operations on the tape correctly. Such a search mistake

of the deck can be prevented by pressing the auto-SPACE

button to insert spaces of about 4 seconds between the tracks

before recording.

Note

When the automatic spacing function is in effect, the display of

the total time and of the total remaining time will include each

of the 4 second non-recorded intervals placed between tracks.

To cancel the automatic spacing function

SPACE

“SPACE” appears

on the display.

SPACE

“SPACE” goes off

from the display.

English

CDX-493, CDX-393MKII

Changing the brightness of the display

CDX-593

You can change the brightness of the display (or turn off the illumination) by pressing the DIMMER button.

During play

DIMMER

Normal illumination

Dim

(Off)

* While the display illumination is off,

the AUTO DISPLAY OFF indicator

on the front panel is illuminated.

AUTO

DISPLAY OFF

During stopped or paused

Normal illumination

Dim

(The AUTO DISPLAY OFF indicator lights up.

In this state, if a disc is played, the display illumination

will be turned off.)

If desired, you can change the brightness of the display in three

degrees by pressing the DIMMER button.

DIMMER

Normal illumination

Slightly dim

Dim

When you listen with headphones

PHONES

OUTPUT LEVEL

–+

Connect the headphones to the PHONES jack and adjust the

volume by using the OUTPUT LEVEL button. Note that this

adjustment will also vary the signal output level to the amplifier.

CDX-593 and CDX-493 only

RANDOM-SEQUENCE PLAY

The unit can play the tracks on a disc in a random sequence selected by the unit’s microcomputer.

To perform random-sequence play

RANDOM

To cancel random-sequence play

RANDOM

STOP

REPEAT PLAY

You can play any desired track or the entire disc repeatedly by pressing the REPEAT button. The repeat play mode will change

whenever you press the REPEAT button.

SINGLE

REPEAT

FULL

REPEAT

SINGLE REPEAT

A single track is repeatedly played.

* This is also available in the programmed-play mode and the

random-sequence play mode.

* If the repeat play mode is switched off, the programmed-play

mode or the random-sequence play mode will be resumed.

FULL REPEAT

All tracks (the entire disc) are played repeatedly.

* In the programmed-play mode, all programmed tracks are

repeatedly played.

* In the random-sequence play mode, all randomly sequenced

tracks are repeatedly played in the same order.

CDX-593 and CDX-493 only

If the power is switched off during FULL REPEAT play mode,

pressing the POWER switch again to turn the unit on will

automatically restore FULL REPEAT play.

Notes

• This feature will not function during programming, or during

programmed play.

• If the SKIP button is pressed during random-sequence

play, the next randomly programmed track will be played. If

the SKIP button is pressed, play will return to the

beginning of the current track.

• This indication appears during random track

selection.

• Total remaining time on the disc will not be displayed during

random-sequence play.

•

CDX-593 and CDX-493 only

If the power is switched off during the random-sequence play,

pressing the POWER switch again to turn the unit on will

automatically restore the random-sequence play. This feature

is useful for timer play.

(Off)

English

PROGRAM PLAY

By programming tracks, you can enjoy listening to your favorite tracks in any desired order. As many as 25 tracks can be

programmed in sequence.

1 Stop the unit.

STOP

PROG

PROGRAM

TOTAL

Flashes.

3 Program a desired track by pressing the corresponding

number button.

* Repeat this operation to program more tracks. You can

select the same track again.

PLAY

Display information during programming

PROGRAM

TOTAL

PROGRAM

1 2 3 4 5 6

TOTAL

1 Shows the program number for the track to be entered

next.

2 Shows the selected track number.

3 Shows the total time of the tracks currently programmed.

4 Shows only the numbers of programmed tracks.

* If the total time becomes 100 minutes or more, the highest

position of a figure will not be displayed.

Notes

• In step 2, if “P-01” does not appear in the display, press the

TIME display mode-select button.

• If, during programming, the TIME display mode-select button

is pressed, the program number display is changed to display

the total time of the programmed tracks. To return to the

previous display, press the TIME display mode-select button

again.

• The SKIP (

and ) button can be used during

Program Play to skip to tracks within the Program.

• The SEARCH (

and ) button can be used during

Program Play to search all tracks, including unprogrammed

tracks.

• You can insert a pause in your program by pressing the

TAPE button instead of a number button. (In this case,

“

B” appears on the display.)

• If, for a compact disc with 25 tracks or more, track number 25

or higher is programmed, the total time will disappear from

the display.

SPACE TAPEPEAK

SYNCHRO

INDEX

PROGCLEAR

OPEN/

87 9 0

54 6

DIMMER TIME

REPEAT RANDOM

SKIP

OUTPUT LEVEL

–+

STOP PAUSE PLAY

To stop program play

Press the STOP button. The first programmed track number will

be displayed.

To resume play, press the PLAY button. Play will begin from the

beginning of the program.

To check program data

1. Press the STOP button to stop the program play.

2. Press the PROG button.

3. Press the SKIP button. Each time you press this

button, the track number and the program number is

displayed in the order of the program. When you want to

check the preceding tracks, press the SKIP

button.

To correct program data

1. Follow the procedure described in “To check program

data.”

2. Display the track number to be corrected by pressing the

SKIP button.

3. Press a number button to select a track to replace the one

displayed. The previously programmed track will be cleared

from the memory and the new one will be programmed.

4. After the correction has been completed, press the PROG

button or the PLAY button.

To cancel a program sequence

There are three methods, as described below.

• Press the STOP button or the CLEAR button while the unit is

stopped.

• Open the disc tray.

• Switch off the power.

INDEX SEARCH

If the disc includes index numbers, play can be started from any desired index number.

SPACE TAPEPEAK

SYNCHRO

INDEX

PROGCLEAR

OPEN/

87 9 0

54 6 +I0

DIMMER TIME

REPEAT RANDOM

SKIP

OUTPUT LEVEL

–+

STOP PAUSE PLAY

1, 3

1 Select a track which has index numbers.

INDEX

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

INDEX

3 Select the desired index number.

To cancel the index search function

Press the INDEX button.

Notes

• Not all discs have index numbers. The index system is a

method for sub-dividing tracks into smaller divisions (for

example, the movements within classical symphonies) for

easier location of those parts. The liner notes with the disc

usually tell if such index numbers are included.

• If an index number is selected that is higher than any index

number on that disc, play will start from the last index

number point on the disc.

• For some discs, play may begin slightly prior to the actual

designated index point.

• If the disc has no encoded index points, play will begin from

the start of the selected track.

• The index number can be designated only while the INDEX

number display is illuminated.

English

TRACK PROGRAMMING FOR RECORDING TO TAPE

The unit can automatically program tracks considering the tape’s total time. This convenient feature can help you to program tracks

so that they fit onto the tape with the least amount of unrecorded space remaining at the end of each side (A and B) of the tape.

L Automatic tape-programming

The unit can automatically program tracks on a disc in their

original order.

1 Stop the unit.

STOP

* The peak level searching function of this unit is useful for

adjusting the recording level on the tape deck. (Refer to

page 18.)

2 You can automatically insert additional time space

between tracks. (Refer to page 10.)

SPACE

3 Enter the tape’s total possible recording time.

You can select any of four tape lengths by pressing the

TAPE button.

TAPE

(Off)

TAPE

5 Press the REPEAT button.

The unit automatically programs tracks for side A and side B

separately considering the tape’s total time.

REPEAT

6 Begin recording on the tape deck and press the

PLAY button on this unit at the same time.

7 The unit will pause at the end of side A of the tape.

Turn the tape over to side B, resume recording and, at

the same time, press the PLAY or PAUSE button on this

unit.

Notes

• All the tracks may not be programmed if the tape’s length is

not enough. To program all tracks, use a longer tape.

• In step 5, you can check the program data for side A and

side B.

PROGRAM

1 2 3 4 5

TOTAL

1 The total number of programmed tracks of each side

appears momentarily when the automatic programming is

finished. Then the first programmed track number for side

A reappears.

2 Shows the total time of programmed tracks for each side.

3 Shows the side of the tape.

4 Shows the programmed track numbers for each side.

• To check, cancel or correct program data, refer to page 14.

* In checking the program data, note that “Pu” appears

between track numbers for side A and side B.

• You can use “CD SYNCHRONIZED RECORDING” if you

have a YAMAHA tape deck with this function. In step 6 and 7,

press the SYNCHRO button then press the PLAY button on

this unit’s remote control transmitter. Recording automatically

begins (for details, refer to page 19.)

SPACE TAPEPEAK

SYNCHRO

INDEX

PROGCLEAR

OPEN/

87 9 0

54 6

DIMMER TIME

REPEAT RANDOM

SKIP

OUTPUT LEVEL

–+

STOP PAUSE PLAY

1 6, 7

4 Otherwise, you can enter the tape’s total possible

recording time manually.

Example: For a C-64 tape (32 minutes on each side)

L Manual tape-programming

For recording tracks in any desired order onto a tape.

1 Follow steps 1 – 4 on page 15.

PROG

PROGRAM

1 2 3 4 5 6 7 8 9 10 11 12

TOTAL

REMAIN

3 Select the track numbers to be recorded on side A in

any desired order.

5 Select the track numbers to be recorded on side B in

any desired order.

21 3

87 9 0

54 6

6 Begin recording on the tape deck and press the PLAY

button on this unit at the same time.

7 The unit will pause at the end of side A of the tape.

Turn the tape over to side B, resume recording and, at

the same time, press the PLAY or PAUSE button on this

unit.

Notes

• If, in step 3 or 5, “E rr” appears on the display, the track

number just selected cannot be programmed because there

is not enough time remaining on the tape. However, at this

time, if any other track number is flashing continuously on the

display, you can program it instead of the unprogrammable

one.

• In step 3 or 5, each time a selection is made, the track number

and the tape’s remaining time will be displayed, and then the

display will change to indicate the next program number.

• You can use “CD SYNCHRONIZED RECORDING” if you

have a YAMAHA tape deck with this function. In step 6 and 7,

press the SYNCHRO button then press the PLAY button on

this unit’s remote control transmitter. Recording automatically

begins (for details, refer to page 19.)

• To check, cancel or correct program data, refer to page 14.

* In checking the program data, note that “Pu” appears

between track numbers for side A and side B.

• A maximum of 25 tracks can be programed. If you insert a

pause in your program, it is counted as one track.

• This function can be used to program up to track number 24.

If the disc has more than 24 tracks, track number 25 and

thereafter can not be programmed.

21 3

87 9 0

54 6

The selected track numbers stop flashing and remain lit. If

a track is too long to fit on the remaining portion of side A,

the number stops flashing and disappears. You can not

program a number that stops flashing and disappears.

The track numbers you can program flash.

SPACE TAPEPEAK

SYNCHRO

INDEX

PROGCLEAR

OPEN/

87 9 0

54 6

DIMMER TIME

REPEAT RANDOM

SKIP

OUTPUT LEVEL

–+

STOP PAUSE PLAY

6, 7

3, 5

4 When track selection for side A is finished, press the

TAPE button.

TAPE

A pause is inserted.

PROGRAM

2 3 5 6 7 9 11

TOTAL

REMAIN

English

L Automatic Random Program tape recording

1 Follow steps 1 – 4 on page 15.

3 Begin recording on the tape deck and at the same time,

press the PLAY button on this unit.

RANDOM

The unit will automatically program tracks for side A and

side B separately considering the tape’s total time.

4 The unit will pause at the end of side A of the tape.

Turn the tape over to side B. Resume recording and, at

the same time, press the PLAY or PAUSE button on this

unit.

Notes

• Because the programmed data changes every time the

RANDOM button is pressed, the amount of time remaining at

the end of the tape also changes accordingly.

• If the tape’s length is not enough, not all tracks can be

programmed. In this case, exchange the tape for a longer

one.

• In step 2, you can check the program data for side A and

side B.

PROGRAM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

TOTAL

1 The total number of programmed tracks of each side

appears momentarily when the automatic programming is

finished. Then the first programmed track number for side

A reappears.

2 Shows the total time of programmed tracks for each side.

3 Shows the side of the tape.

4 Shows the programmed track numbers for each side.

• To check, cancel or correct program data, refer to page 14.

* In checking the program data, note that “Pu” appears

between track numbers for side A and side B.

• You can use “CD SYNCHRONIZED RECORDING” if your

tape deck has this function. In step 3 and 4, press the

SYNCHRO button then press the PLAY button on this unit’s

remote control transmitter. Recording automatically begins

(for details, refer to page 19.)

3, 4

SPACE TAPEPEAK

SYNCHRO

INDEX

PROGCLEAR

OPEN/

87 9 0

54 6

DIMMER TIME

REPEAT RANDOM

SKIP

OUTPUT LEVEL

–+

STOP PAUSE PLAY

The unit can automatically program tracks in random order for recording to tape.

Automatic searching for the peak level on a disc

This convenient feature automatically finds level peak in the source. It then plays the peak repeatedly for a few moments in order for

you to adjust the recording level on the tape deck, before you begin recording.

SPACE TAPEPEAK

SYNCHRO

INDEX

PROGCLEAR

OPEN/

87 9 0

54 6

DIMMER TIME

REPEAT RANDOM

SKIP

OUTPUT LEVEL

–+

STOP PAUSE PLAY

1 Stop the unit.

STOP

PEAK

The peak level search is performed on the disc.

1 2 3 4 5 6 7 8 9 10 11 12

PEAK

REPEAT

1 2 3 4 5 6 7 8 9 10 11 12

PEAK

REPEAT

Next, the part where the source level peaks is

repeatedly played. Adjust the recording level on the tape

deck listening to this sound.

To cancel this function

Press the STOP button. (Some other buttons can also be used

to cancel this function.)

Notes

• Sound peak levels are randomly selected by this unit’s

internal microcomputer. Therefore, even if a peak search is

performed twice or more on the same disc, the same peak

may not be selected each time. However, this will not greatly

affect the adjustment of recording levels.

• In program play mode, this feature functions with

programmed tracks only. If program play is being performed,

first press the STOP button, and then press the PEAK

button. If program play is not being performed, press only the

PEAK button.

English

CD SYNCHRONIZED RECORDING

This unit can perform automatic synchronized CD to tape recording. With this function, you can record a CD on tape very easily and

more precisely.

This recording method requires a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to

know whether it is compatible or not.)

* This unit and the tape deck must be placed near each other so that both can receive the signals from this unit’s remote control

transmitter.

SPACE TAPEPEAK

SYNCHRO

INDEX

PROGCLEAR

OPEN/

87 9 0

54 6 +I0

DIMMER TIME

REPEAT RANDOM

SKIP

OUTPUT LEVEL

–+

STOP PAUSE PLAY

1 Load the disc.

2 Load a tape on the tape deck.

* The peak level search function of this unit is useful for

adjusting the recording level on the tape deck. (Refer

to page 18.)

OPEN/

This unit enters into the pause mode, and the tape deck

enters into the REC/PAUSE mode.

* In this mode, the time display on this unit flashes on and

off.

SYNCHRO

4 If necessary, select a desired track.

6 If you want to stop recording temporarily and restart

recording from a desired track, follow steps 3 – 5 again.

To cancel this function

Press the STOP button.

Notes

• To finish or stop the recording, press the stop button on your

tape deck.

• A programmed sequence of tracks can also be recorded with

this function, instead of recording an entire disc. (Refer to

page 13 – 14 for the programming procedure.)

• This function can also be used together with the automatic

tape-programming function. (Refer to page 15 – 17.)

SKIP

Both CD play and tape deck recording begin.

* CD play begins a little later than recording starts.

PLAY

NOTES ABOUT THE REMOTE CONTROL TRANSMITTER

Battery installation

Battery replacement

If you find that the remote control transmitter must be used

closer to the main unit than usual, the batteries are weak.

Replace both batteries with new ones.

Notes

• Use only AA, R6, UM-3 batteries for replacement.

• Be sure the polarities are correct. (See the illustration inside

the battery compartment.)

• Remove the batteries if the remote control transmitter will not

be used for an extended period of time.

• If batteries leak, dispose of them immediately. Avoid touching

the leaked material or letting it come in contact with clothing,

etc. Clean the battery compartment thoroughly before

installing new batteries.

Remote control transmitter operation range

30°

Remote control

sensor

Within approximately

6 m (19.7 feet)

Notes

• There should be no large obstacles between the remote

control transmitter and the main unit.

• If the remote control sensor is directly illuminated by strong

lighting (especially an inverter type of fluorescent lamp etc.),

it might cause the remote control transmitter not to work

correctly. In this case, reposition the main unit to avoid direct

lighting.

NOTES ABOUT HANDLING COMPACT DISCS

• This compact disc player is designed only for playing

compact discs bearing the

mark. Never attempt to load

any other type of disc into the unit.

The unit will also play 8-cm (3-inch) compact discs.

• To remove a disc from its storage case, open the case and

then press down at the center; with a finger through the

center hole and the outer edges held as shown in the

illustration, lift the disc out carefully.

• Always handle the disc with care so that its surface is not

scratched.

• Compact discs are not subjected to wear during play, but

damage to the disc surface when the disc is being handled

can adversely affect the disc’s play.

• Compact discs are not affected by small particles of dust or

fingerprints on their playing surface, but even so they should

be kept clean. Wipe by using a clean, dry cloth. Do not wipe

with a circular motion; wipe straight outward from the center.

• Do not try to clean the disc’s surface by using any type of

disc cleaner, record spray, anti-static spray or liquid, or any

other chemical-based liquid, because such substances might

irreparably damage the disc’s surface.

• Do not expose discs to direct sunlight, high temperature or

high humidity for a long period of time, because these might

warp or otherwise damage the disc.

To play a 8-cm (3-inch) CD

Place it in the inner recessed area of the disc tray. Do not put a

normal (12-cm/5-inch) CD on top of a 8-cm CD.

No!

CDX-593

Stránka se načítá ...

Yamaha CDX-593MKII Uživatelský manuál

Značka: Yamaha

Modelka: CDX-593MKII

Kategorie: CD přehrávače

Typ: Uživatelský manuál

Stáhnout PDF

zpráva

v jiných jazycích

polski: Yamaha CDX-593MKII Instrukcja obsługi
español: Yamaha CDX-593MKII Manual de usuario
italiano: Yamaha CDX-593MKII Manuale utente
Deutsch: Yamaha CDX-593MKII Benutzerhandbuch
svenska: Yamaha CDX-593MKII Användarmanual
português: Yamaha CDX-593MKII Manual do usuário
français: Yamaha CDX-593MKII Manuel utilisateur
Türkçe: Yamaha CDX-593MKII Kullanım kılavuzu
English: Yamaha CDX-593MKII User manual
dansk: Yamaha CDX-593MKII Brugermanual
русский: Yamaha CDX-593MKII Руководство пользователя
suomi: Yamaha CDX-593MKII Ohjekirja
Nederlands: Yamaha CDX-593MKII Handleiding
română: Yamaha CDX-593MKII Manual de utilizare

Yamaha CDX-593MKII Uživatelský manuál

Yamaha CDX-593MKII Uživatelský manuál

v jiných jazycích

Související papíry