Johnson Controls A19A Uživatelský manuál

Typ
Uživatelský manuál
European Refrigeration Controls Catalogue
Catalog Section 1
Product Bulletin A19A
Issue 03/03/2003
© 2003 Johnson Controls Inc. Catalogue Section 1
Order No. PD-A19A-E
PSC9705
I
ntroduction
These thermostats are designed for
refrigeration, cooling, heating, ventilation and
air-conditioning applications. Standard models
are provided for remote sensing or room
sensing. Models with manual reset are
available for low or high limit functions.
D
escription
These thermostats are available with fixed or
adjustable differential. The various control
ranges cover a broad range of temperature
applications with a minimum number of models.
On request a built-in high or low limit stop is
possible and can be adjusted quickly and easily
in the field. All models have a universal way of
adjustment. For this purpose a knob and sealing
cap are enclosed.
All A19 style 1 wholesaler code models have a
bulb clamp plus screw also enclosed.
A19A capillary thermostat
A19B space thermostat
Feature and Benefits
Liquid filled sensing element
No cross ambient temperature problems
Contact differential over the whole range
Dust tight Penn switch Prevents pollution of the contacts by
electrostatic influences.
Trip free manual reset Override is not possible in the control function
Front adjustment Less mounting space required.
Series A19A/A19B/A19D
Thermostats for Refrigeration, Cooling, Heating, Ventilation
and Air-conditioning
A19A
Issue 03/03/2003
Catalogue Section 1 © 2003 Johnson Controls Inc.
Order No. PD-A19A-E
2
N
ote
These controls are designed for use only
as operating controls. Where an operating
control failure would result in personal injury
or loss of property it is the responsibility of
the installer to add devices or systems that
protect against, or warn of, control failure.
SPDT contacts are standard on all models.
Instruments have compact sizes. Types
A19ACC and A19ADC have a trip-free manual
reset . Reset button must be pressed and
released. Contact cannot be blocked in closed
position. All types have VDE and SEV approval.
To facilitate ordering, wholesaler codes have
been added on some universal models.
All models are provided with a separate knob
and sealing cap.
T
ype number matrix
A19AAC capillary thermostat, fixed differential.
A19AAF capillary thermostat, special close
fixed differential.
A19ABC capillary or immersion thermostat,
adjustable differential.
A19ACC capillary thermostat, lock-out low
with manual reset.
A19ADC immersion thermostat, lock-out high
with manual reset.
A19BAC space thermostat, fixed differential.
A19BBC space thermostat, adjustable
differential.
A19DAC strap-on thermostat.
A19DAF strap-on thermostat
A
djustment
1. Models “set low” (refer to cover label)
The dial indicates the low switch point
(1 - 2 open, 1 - 3 closed).
The high switch point (1 - 2 closed,
1 - 3 open) is obtained by adding the
differential to the low switch point.
2. Models “set high” (refer to cover label)
The dial indicates the high switch point
(1 - 2 closed, 1 - 3 open). The low switch
point (1 - 2 open, 1 - 3 closed) is obtained by
deducting the differential from the high switch
point.
Exception: Type A19ADC, dial indicates high
switch point ( 1 - 3 closed, 1 - 2 open).
N
ote
The standard screwdriver adjustment can
be converted easily in the field to knob
adjustment. Also concealing of adjustment
and scale is possible after installation.
C
ontact functions
Types A19AAC,
A19AAF, A19ABC,
A19BAC, A19BBC,
A19DAC
Fig. 1
1-2 closes on temperature increase
Type A19ACC
Fig. 2
1-2 opens on temperature decrease
Type A19ADC
Fig.3
1-2 opens on temperature increase
R
epair and replacement
Repair is not possible. In case of an improperly
functioning control, please check with your
nearest supplier. When contacting the supplier
for a replacement you should state the
type/model number of the control. This number
can be found on the data plate or cover label.
1
23
θ
>
1
23
θ
<
1
23
θ
>
A19A
Issue 03/03/2003
© 2003 Johnson Controls Inc.
Catalogue Section 1
Order No. PD-A19A-E
3
S
ensor styles
Fig. 4
Style 1a (drawn bulb)
Fig.5
Style 1b swaged bulb, can be used with
closed-tank connector FTG13A-600
½" x 14 NPT
33.3 60
Fig. 6
Style 4h
½" x 1 4 NP T
58.3
60
Fig. 7
Style 2
Fig. 8
Style 20
Fig. 9
Style 3 (coil)
B
ulb size and finish, bulb wells
Range (°C) Style Bulb size
(mm)
Finish Bulb well (optional)
-35 to +10 1b 9.5 x 110 Tin-plated WEL14A602R
-35 to +10 3 - Stainless Steel -
-5 to +28 1b 9.5 x 135 Tin-plated WEL14A603R
-5 to +28 3 - Stainless Steel -
-35 to +40 1b 9.5 x 110 Tin-plated WEL14A602R
-35 to +40 3 - Stainless Steel -
0 to 13 1a 9.3 x 80 - WEL16A601R
0 to 43 3 - Stainless Steel -
1 to 60 1b 9.5 x 115 - WEL14A602R
5 to 32 1b 9.5 x 155 Tin-plated No bulb well available
10 to 95 1a 7.4 x 75 - WEL11A601R
40 to 120 1b 9.5 x 100 - WEL14A602R
35 to 150 1a 5 x 265 - No bulb well or closed tank
connector possible
90 to 290 1a 5 x 155 - No bulb well or closed tank
connector possible
A19A
Issue 03/03/2003
Catalogue Section 1 © 2003 Johnson Controls Inc.
Order No. PD-A19A-E
4
T
ype number selection table:
Range
( °C)
Diff.
(K)
Bulb
style
Setting
(see page 2
adjustment)
Cap.
length
Max.
bulb
temp.
Wholesaler
code
Orde
r
number
Type A19AAC Capillary thermostat, fixed differential
-35 to +10 2.5 1b set low 2 m 60 °C A19AAC-9102
-5 to +28 2 1b set low 2 m 60 °C A19AAC-9005
-5 to +28 2 1b set low 5 m 60 °C A19AAC-9124
1 to 60 2 1b set low 3 m 85 °C A19AAC-9127
40 to 120 3.5 1b set high 2 m 145 °C A19AAC-9009
35 to 150 4 1a set high 2 m 180 °C A19AAC-9107
90 to 290 5.5 1a set high 2 m 290 °C A19AAC-9108
Type A19ABC Capillary or immersion thermostat, adjustable differential
-35 to +40 2.8 to 8 1b set low 3.5 m 60 °C A19-A4
A19ABC-9037
-35 to +40 2.8 to 8 1b set low 6.5 m 60 °C A19-A5
A19ABC-9036
-35 to +10 2.8 to 11 1b set low 2 m 60 °C A19-A1
A19ABC-9103
-5 to +28 2 to 8 1b set low 2 m 60 °C A19-A2
A19ABC-9104
1 to 60 2 to 8 1b set low 5 m 85 °C
A19ABC-9117
1 to 60 2 to 8 1b set low 3 m 85 °C A19-A3
A19ABC-9116
10 to 95 3.5 to 13 1a set high 3.5 m 115 °C
A19ABC-9106
40 to 120 3.5 to 13 2 set high - 145 °C
A19ABC-9011
bulb well incl.
40 to 120 3.5 to 13 4h set high 2 m 145 °C
A19ABC-9012
bulb well incl.
Type A19ACC Capillary thermostat, lock-out low with manual reset
-35 to +10
6
M 1b set low 2 m 60 °C
A19ACC-9100
-35 to +10 N
6
M 1b set low 3.5 m 60 °C
A19ACC-9105
-35 to +10 N
6
M 1b set low 5 m 60 °C
A19ACC-9111
-35 to +10 N
6
M 1b set low 6.5 m 60 °C
A19-F
A19ACC-9116
-5 to +28
4
M 1b set low 2 m 60 °C
A19ACC-9101
-5 to +28
4
M 1b set low 5 m 60 °C
A19ACC-9103
-5 to +28
4
M 1b set low 3 m 60 °C
A19ACC-9107
Type A19ADC immersion thermostat, lock-out high with manual reset
40 to 120
7
O
2
set high - 145 °C
A19ADC-9200
bulb well incl.
Type A19AAF Capillary thermostat, close, fixed differential
0 to 10 1.5 1a set low 2 m 80 °C
A19AAF-9101
0 to 10 1.5 1a set low 2 m 80 °C A19-M P
A19AAF-9102
5 to 32 0.75 1b set high 2 m 60 °C
A19AAF-9103
M Indicates temperature increase above cut-out
point to make reset possible.
N Low limit stop factory set +2.5 °C may be
removed in the field.
O Indicates temperature decrease below cut-
out point to make reset possible.
P Milk-cooler thermostat.
A19A
Issue 03/03/2003
© 2003 Johnson Controls Inc.
Catalogue Section 1
Order No. PD-A19A-E
5
T
ype number selection table:
Range
( °C)
Diff.
(K)
Bulb
style
Setting
(see page 2
adjustment)
Cap.
length
Max.
bulb
temp.
Wholesaler
code
Orde
r
number
Type A19BAC Space thermostat, fixed differential
-35 to +10 2.5 3 set low - 60 °C
A19-B1
A19BAC-9250
-5 to
+28
2 3 set low - 60 °C
A19-B2
A19BAC-9251
0 to 43
2 3 set high - 60 °C
A19-B3
A19BAC-9001
Type A19BBC Space thermostat, adjustable differential
-35 to +40 2.8/8 3 set low - 60 °C A19-B4
A19BBC-9275
Type A19DAC, Strap-on thermostat, fixed differential
40 to 120 4.5 20 set high - 145°C
A19DAC-9001
92 to 116 2 20 set high - 145°C
A19DAF-9001
Note: If what you need is not in the type number selection table, then please contact your
representative.
A19A
Issue 9811
Catalogue Section 1 © 2003 Johnson Controls Inc.
Order No. PD-A19A-E
6
A
ccessories (optional)
3
2
A
B
1
C
Order no. Dimension A Dimension
B Dimension C
Internal
WEL11A601R 60 mm 118 mm 7.3 mm
WEL14A602R 125 mm 171 mm 9.8 mm
WEL14A603R 147 mm 193 mm 9.8 mm
WEL16A601R 71 mm 117 mm 9.5 mm
1. Bushing
2. Set screw
3. Adapter, 1/2"-14 NPT
Fig. 10
Bulb well (brass, copper pipe)
76
63
27
ø 5.5 (3x)
1/2"-14 NPT
11.5
Fig. 11
Duct flange to be used with closed-tank
connector FTG13A-600R.
Order number T-752-1001
3 4 3 5 621
1. Style 1b bulb support tube
2. Packing nut
3. Washer
4. Packing
5. Adapter, 1/2"-14 NPT
6 . Bulb
Fig. 12
Closed-tank connector
Order number FTG13A-600R
A19A
Issue 03/03/2003
© 2003 Johnson Controls Inc.
Catalogue Section 1
Order No. PD-A19A-E
7
D
imensions (mm)
32
13
19
75
19
7
55
40
13
125
46.5
21.5
6
16
28
3.6
1
2
4
3
1 Reset lever
2 Knob packed separately with the control
3 22.3 mm dia. cable inlet hole for PG-16
4 Earth screw
Fig. 13
A19A
Issue 9811
Catalogue Section 1 © 2003 Johnson Controls Inc.
Order No. PD-A19A-E
8
S
pecifications
CE Conformit
y
According to low voltage directive and EMC directive
Operatin
g
ran
g
e
-35 to +290 °C. See type number selection table.
Differential
See type number selection table.
Differential ad
j
ustments
Controls with adjustable differential (types A19ABC and A19BBC) have
an adjustment lever under the cover.
Senso
r
st
y
les
Styles 1a, 1b, 2, 3, 4h, and 20 (see drawings page 3)
Electrical ratin
g
s
~15(8) A, 230 V; except A19AAF and A19DAF: ~15(3) A 230 V, and
A19ABC-9036/9037: ~15(5) A 230 V
Ambient temp. limits
-35 to +55 °C
Conduit openin
g
22.3 mm diam. hole for PG-16 connector
Material
Case 1.75 mm cold-rolled zinc plated steel
Cover 1.5 mm ABS plastic
Protection Class
IP30
Shippin
wei
ht
Individual pack 0.4 kg
Overpack 10 kg (24 pcs)
Dimensions
(see dimension drawing)
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond
these specifications, consult the local Johnson Controls office or representative. Johnson Controls shall not be liable for damages
resulting from misapplication or misuse of its products.
Johnson Controls International, Inc.
Headquarters: Milwaukee, WI, USA
European Headquarters: Westendhof 8, 45143 Essen, Germany
European Factories: Lomagna (Italy), Leeuwarden (The Netherlands) and Essen (Germany)
Branch Offices: Principal European Cities.
This document is subject to change Printed in Europe
1
PSC9720
SHT067N600(003)
Instruction sheet
Litho in the Netherlands 9712EP
A19
ENGLISH
READ THIS INSTRUCTION SHEET CAREFULLY BEFORE
INSTALLING, RETAIN IT SAFELY FOR FUTURE REFER-
ENCE.
1 Setpoint dial
2 Knob for adjustment (separate packed)
3 Cap for concealed adjustment (separate packed)
4 Differential lever (adjustable differential models only)
5 Cover (not on models A19AGC, A19AGF and BGC models)
The A19 is a temperature control designed to sense temperatures.
According to EN 60730 it is a type 1 action, independently mounted
control, suitable for surface mounting on a plane surface and for use in
normal pollution situation. The A19AGC,A19AGF and A19BGC mod-
els are incorporate controls.
These controls are designed for use only as operating controls. Where
an operating control failure would result in personal injury or loss of
property, it is the responsibility of the installer to add devices or systems
that protect against, or warn of, control failure.
Installation
DO NOT TURN SEALED SCREWS
!
Disconnect from power supply before the cover is removed.
!
For A19AGC, A19AGF and A19BGC Disconnect power supply
before adjusting the control.
Wiring
All wiring should conform to local codes and must be carried out by
authorized personnel only. When using multi stranded wire apply a
cable ferrule to the cable end.
Check out procedure
Before leaving the installation observe at least three complete operat-
ing cycles to be sure that all components are functioning correctly. If not
contact your supplier.
!
180°
T min.: - 35 °C
T max.: + 55 °C
1
4
5
23
2
rdfguhlj;ko
b n b n , m/,. m
fchfchhbkjlkjn
(3x)
M 4x6
0.5 to 4 mm
(20-12 AWG)
2
1
3
1
3
2
1
3
2
°C
Set Low
SP
1
2
3
1
2
3
°C
Set High
SP
1
3
2
1
3
2
°C
ACC
SP
6k (-35 to +10°C)
4k ( -5 to +10°C)
1
2
3
1
2
3
°C
ADC
SP
7k ( +40 to 120°C)
1
3 2
θ >
AAC, AAF, ABC
AGF, BAC, BBC
1
2 3
θ >
ADC
1
2 3
θ <
ACC
LISEZ ATTENTIVEMENT CES INSTRUCTIONS AVANT DE
COMMENCER L’INSTALLATION ET CONSERVEZ- LES
POUR VOUS Y REFERER ULTERIEUREMENT
1. Cadran de consigne
2. Bouton de réglage (emballé séparément)
3. Bouchon pour réglage caché (emballé séparément)
4. Levier de différentiel (uniquement pour modèles avec différentiel
réglable)
5. Couvercle (pas sur les modèles A19AGC, A19AGF ni BGC)
Le modèle A19 est un régulateur de température destiné à détecter les
températures
D’après la norme EN 60730 c’est un régulateur indépendant, action
type 1, conçu pour un montage sur surface plane et utilisé dans des
environnements normalement pollués. Les modèles A19AGC, A19AGF
et A19BGC sont des commandes incorporées.
Cet appareil est destiné à assurer des fonctions de régulation. Lorsque
la panne ou le mauvais fonctionnement de ce dernier risque d'entraîner
des dommages matériels ou corporels, il est de la responsabilité de
l'installateur de prévoir des organes de sécurité indépendants afin de
ne pas utiliser le régulateur en équipement de sécurité.
Installation
NE PAS TOURNER LES VIS SCELLEES
!
Couper l’alimentation électrique avant d’enlever le couvercle.
!
Pour A19AGC, A19AGF et A19BGC, coupez l’alimentation avant
de régler les commandes.
Câblage
Tous les raccordements doivent être conformes aux normes en
vigueur et ne peuvent être réalisés que par du personnel autorisé.
En cas d’utilisation de câble souple multi-brins, utiliser un embout à
sertir.
Procédure de contrôle
Après avoir terminé l’installation, observez au moins trois cycles
complets de fonctionnement pour s’assurer que tous les composants
fonctionnent correctement. Si cela n’est pas le cas, contactez votre
fournisseur.
!
FRANÇAIS
BITTE LESEN SIE DIESE ANWEISUNGEN VOR DER IN-
STALLATION SORGFÄLTIG DURCH UND BEWAHREN SIE
SIE ZUR WEITEREN VERWENDUNG AUF.
1 Sollwertskalenscheibe
2 Einstellknopf (separat verpackt)
3 Aufsatz für verdeckte Einstellung (separat verpackt)
4 Differentialhebel (Nur einstellbare Differentialmodelle)
5 Deckel (Nicht bei Modellen A19AGC, A19AGF und A19BGC)
Der A19 ist ein Temperaturregler zum Fühlen von Temperaturen.
Dieses ist entsprechend EN 60730 ein, Wirkungsweise Typ 1, Unab-
hängig montiertes Regel- und Steuergerät Geeignet als Aufbaugerät,
z. B. für Wandmontage und für Anwendung in Umgebungsbedingun-
gen mit üblicher Verunreinigung. Bei den Modellen A19AGC, A19AGF
und A19BGC handelt es sich um Einbauregler.
Diese Regler sind ausschließlich zur Verwendung als Bedienungs-
elemente vorgesehen. In Situationen, in denen das Versagen eines
Bedienungselements Personenschäden oder Sachverluste nach sich
ziehen kann, ist der Installateur dafür verantwortlich, entsprechende
Vorrichtungen oder Systeme einzubauen, die einem Regelversagen
entgegenwirken oder die als entsprechende Frühwarnsysteme die-
nen.
Montage
PLOMBIERSCHRAUBEN NICHT ANZIEHEN!
!
Vor dem Entfernen des Deckels Spannung abschalten.
!
A19AGC, A19AGF und A19BGC: Von Stromversorgung trennen,
bevor der Regler eingestellt wird.
Verdrahtung
Alle Verdrahtungen müssen den am Einsatzort geltenden Vorschriften
entsprechen und sind ausschließlich dazu befugten Personen
vorbehalten.Bei Vewendung feindrätiger Leitungen sind
Adernendhülsen zuverwenden.
Überprüfung
Vor dem Verlassen der Anlage sollten Sie diese mindestens drei
Betriebszyklen beobachten und überprüfen, daß alle Komponenten
ordnungsgemäß funktionieren. Sollte dies nicht der Fall, wenden Sie
sich bitte an Ihren Händler.
!
DEUTSCH
NEEM DEZE INSTRUCTIES GRONDIG DOOR ALVORENS U
BEGINT MET HET INSTALLEREN EN BEWAAR ZE VOOR
TOEKOMSTIG GEBRUIK
1 Temperatuur instellingsschijf
2 Knop voor temperatuur afstelling (apart verpakt)
3 Kap voor afdekking van temperatuurinstelling (apart verpakt)
4 Differentie instellingshendel (alleen bij modellen met verstelbare
differentie)
5 Deksel (niet op A19AGC, A19AGF en A19BGC modellen)
De A19 is een thermostaat ontworpen voor het meten van temperatu-
ren
Volgens EN 60730 is het een, type 1 aktie, onafhankelijk te monteren
apparaat, geschikt voor montage op een plat oppervlak en geschikt
voor gebruik in een normaal vervuilde omgeving. De A19AGC,
A19AGF en A19BGC modellen zijn in te bouwen apparaten.
Deze apparaten zijn alleen ontworpen voor gebruik als regelaar. Als
een foutieve werking van de regelaar persoonlijk letsel of schade kan
veroorzaken, moet de installateur beveiliging of alarm apparatuur
aansluiten die aangeeft dat de regelaar niet funktioneert.
Montage
NIET DRAAIEN AAN AFGELAKTE SCHROEVEN
!
Schakel de voedingsspanning af voordat het deksel wordt verwij-
derd
!
Voor A19AGC,A19AGF en A19BGC : Sluit de voedingsspanning
af voordat de regelaar wordt afgesteld.
Bedrading
De installatie, de elektrische aansluiting en de instellingen dienen
overeen te stemmen met de plaatselijke voorschriften en mogen enkel
worden uitgevoerd door bevoegd personeel.
Indien een draad met flexibele kern wordt toegepast dient het uiteinde
van de draden te worden voorzien van een ader eindhuls.
Controleprocedure
Controleer, voordat u de installatie zelfstandig laat werken, gedurende
ten minste drie complete werkcycli of alle onderdelen correct werken.
Werkt de installatie niet correct, neem dan contact op met uw leveran-
cier.
!
LEA DETENIDAMENTE ESTA HOJA DE INSTRUCCIONES
ANTES DE REALIZAR LA INSTALACION Y GUARDELA
PARA FUTURAS CONSULTAS
1 Cuadrante para fijar el punto de control
2 Botón de ajuste (embalado por separado)
3 Casquillo para ajuste oculto (embalado por separado)
4 Palanca diferencial (sólo en modelos con diferencial ajustable)
5 Cubierta (no en los modelos A19AGC, A19AGF y BGC)
El A19 es un control de temperatura diseñado para detectar tempera-
turas.
Según EN 60730, es un, acción tipo 1 control montado independien-
temente adecuado para montaje en superficie en una superficie plana
y para uso en condiciones de contaminación normal.
Los modelos A19AGC, A19AGF y A19BGC son controles incorpora-
dos
Estos controles están diseñados para ser utilizados solamente como
controles de funcionamiento. En los casos en que un fallo de control
de funcionamiento pudiera producir daños personales o a propieda-
des, es responsabilidad del instalador añadir los dispositivos o siste-
mas que protejan o adviertan de los fallos de control.
Instalación
NO GIRE LOS TORNILLOS SELLADOS.
!
Desconectar la corriente antes de quitar la tapa.
!
Para A19AGC, A19AGF y A19BGC, desconecte la fuente de
alimentación antes de ajustar el control.
Cableado
Todo el cableado debe cumplir las normativas locales y debe realizar-
se solamente por el personal autorizado. Cuando se utiliza cable
flexible aplicar terminales en los extremos.
Procedimiento de comprobación
Antes de finalizar la instalación, observe por lo menos tres ciclos de
operación completos para asegurarse que todos los componentes
estén funcionando correctamente. Sino es así, póngase en contacto
con su proveedor.
!
ESPAÑOL
GERE ATTENTAMENTE LE ISTRUZIONI PRIMA DELL’IN-
STALLAZIONE E lSERVARE PER FUTURE CONSULTAZIO-
NI
1 Scala del valore di riferimento
2 Manopola di regolazione (fornita a parte)
3 Cappellotto per regolazione protetta (fornito a parte)
4 Leva differenziale (solo modelli a differenziale variabile)
5 Coperchio (eccetto modelli A19AGC, A19AGF e BGC)
Il dispositivo A19 è un regolatore della temperatura in grado di rilevare
le temperature.
Secondo le EN 60730 è un, azione tipo 1 Regolatore montato indipen-
dentemente, adatto per montaggio su una superficie piatta e per uso
in situazioni di normale inquinamento. I modelli A19AGC, A19AGF e
A19BGC sono comandi incorporati.
Questi dispositivi hanno esclusivamente la funzione di comandi. Se un
comando può provocare danni alle persone o alle cose, è responsabi-
lità dell’installatore aggiungere gli opportuni dispositivi o sistemi di
protezione o di segnalazione dello stato di guasto del comando stesso.
Installazione
NON SBLOCCARE LE VITI SIGILLATE
!
Staccare l’alimentazione prima di togliere il coperchio.
!
Per A19AGC, A19AGF e A19BGC: togliere tensione prima di
regolare il comando.
Cablaggio
Il cablaggio deve essere conforme alle normative locali ed essere
eseguito esclusivamente da personale autorizzato. Quando si usa un
cavo con filo a trefoli occorre applicare un capocorda alla fine di ogni
filo.
Messa in funzione
Prima di concludere l’installazione, osservare almeno tre cicli operativi
completi per accertare il corretto funzionamento di tutti i componenti.
In caso di irregolarità, contattare il proprio fornitore.
!
ITALIANO
NEDERLANDS
Specification Description Spezifikation
Specificatie Especificación Specifiche
Especificação Specifikationer Erittely
Beskrivelse Spesifikasjoner Πρïδιαγραæές
Technic data
Mounting Montage Montage
Montage Montaje Montaggio
Montagem Montering Kiinnitys
Montering Montering Mïντάρισµα
Instalace
Adjustment Réglage Einstellung
Instelling Ajuste Regolazione
Ajuste Justering Säätö
Justering Justering Pύθµιση
Seřízení
Wiring Raccordement Verdrahtung
Bedrading Cableado Cablaggio
Cablagem Ledningar Jodotus
Elektrisk installation Kabling Kαλωδίωση
Zapojení
Max. 2x
Ø 3.5 mm
55
40
75
125
2
LEIA ATENTAMENTE ESTA FOLHA DE INSTRUÇÕES AN-
TES DE PROCEDER À INSTALAÇÃO E GUARDE-A PARA
UTILIZAÇÃO FUTURA.
1 Indicador do ponto de referência
2 Botão para ajuste (embalado separadamente)
3 Cobertura para ajuste oculto (embalado separadamente)
4 Alavanca diferencial (somente modelos de diferencial ajustável)
5 Tampa (não nos modelos A19AGC, A19AGF e BGC
O A19 é um controlador de temperatura destinado à detecção de
temperatura.
Segundo EN 60730 é um, acção tipo 1, Controlador montado indepen-
dentemente, apropriado para montagem de superfície sobre uma
superfície plana e para a utilização em condições normais de poluição.
Os modelos A19AGC, A19AGF e A19BGC são controladores incorpo-
rados.
Estes controladores foram concebidos exclusivamente para a utiliza-
ção como controladores operacionais. Quando uma falha do controlador
operacional possa resultar em ferimentos físicos ou perda de propri-
edades, recai sobre o instalador a responsabilidade o acréscimo de
dispositivos ou sistemas que protejam ou alertem contra uma falha do
controlador.
Instalação
NÃO GIRE OS PARAFUSOS SELADOS.
!
Antes de retirar a tampa, desligue a alimentação eléctrica.
!
Para A19AGC, A19AGF e A19BGC, desligue a alimentação eléc-
trica antes de ajustar o controlador.
Conexões
Todas as conexões devem estar conforme os códigos locais e
efectuadas somente por pessoal autorizado. Ao ser utilizado cabo
multifilar, monte um adaptador de cabo na extremidade do cabo.
Procedimento de controlo
Antes de abandonar a instalação, observe pelo menos três ciclos de
funcionamento completos para assegurar-se de que todos os compo-
nentes funcionem correctamente. Do contrário, contacte o seu forne-
cedor.
!
LÄS NOGA DESSA INSTALLATIONSANVISNINGAR INNAN
INSTALLATIONEN UTFÖRS OCH BEVARA DEM FÖR FRAM-
TIDA REFERENS.
1. Vrid för inställningspunkt
2. Justeringsratt (i separat förpackning)
3. Lock till dold justering (i separat förpackning)
4. Differentialspak (endas för modeller med justeringsbar differential)
5. Skyddshölje (ej för modell A19AGC, A19AGF eller BGC-modeller)
A19 är en temperaturkontroll konstruerad för att avkänna temperatu-
rer.
I hänvisning till EN 60730 är det, typ 1 styrning, oberoende monterad
styrning passar för suitable för ytmontering på en plan yta och för
användning i normalt nedsmutsad miljö. Modellerna A19AGC, A19AGF
och A19BGC inbegriper styrenheter.
Denna styrenhet är utformad för att användas som opererande styren-
het och skall därför endast användas som sådan. Det är installatörens
ansvar att förse installationen med enheter och/eller säkerhetssystem
som förebygger att eventuell skada tillfogas personer eller egendom till
följd av driftfel i styrenheten.
Installation
VRID EJ PÅ DE FÖRSEGLADE SKRUVARNA
!
Koppla bort spänningen innan täcklocket tas bort.
!
För A19AGC, A19AGF och A19BGC Koppla bort nätanslutningen
innan justeringar till styrenheten utförs.
Ledningar
All kabeldragnig ska utföras enligt gällande bestämmelser och får
endast utföras av behörig personal. När det används mångdledad
kabel, sätt dit i en kabelsko i kabeländarna.
Kontrollera proceduren
Efter installationen bör man övervaka minst tre hela operationscyklar
fungerar som de ska. Om detta inte är fallet, kontakta leverantören.
!
LUE TÄMÄ OHJELEHTINEN ENNEN ASENNUSTA HUO-
LELLISESTI JA SÄILYTÄ SE MYÖHEMMÄN TARPEEN VA-
RALTA
1 Asetusarvon valitsin
2 Säätönuppi (pakattu erikseen)
3 Kärkikappale piilosäätöä varten (pakattu erikseen)
4 Erovipu (voidaan asentaa vain differentiaalimalleihin)
5 Suojus (ei A19AGC, A19AGF, BGC malleissa)
A19 on lämpötilan säädin, joka on tarkoitettu lämpötilan mittaamiseen.
EN 60730- normin mukaan kyseessä on, tyyppiä 1 toiminta, itsenäi-
sesti asennettava säädin, soveltuu asennettavaksi tasaiselle pinnalle
ja voidaan käyttää normaalissa saastetilanteessa.
Mallit A19AGC, A19AFG ja A19BGC ovat kiinteitä säätimiä.
Nämä ohjausreleet on tarkoitettu vain laitteiston toiminnan ohjauk-
seen. Jos ohjaushäiriö voi johtaa henkilö- tai aineellisiin vahinkoihin,
asentajan velvollisuutena on huolehtia tarvittavista lisälaitteista tai -
järjestelmistä, jotka suojaavat ihmisiä ja laitteistoa ohjaushäiriön
seurauksilta tai varoittavat häiriöstä.
Asennus
ÄLÄ VÄÄNNÄ SINETÖITYJÄ RUUVEJA
!
Katkaise virta ennen suojuksen poistamista.
!
Säätimet A19AGC, A19AFG ja A19BGC: katkaise virta ennen
säätimen asennusta.
Kytkentä
Johdotus on tehtävä paikallisten määräysten mukaisesti ja sen saa
suorittaa vain ammattitaitoinen henkilö. Käytettäessä monisäikeistä
johtoa kaapelin holkki tulee kiinnittää kaapelin päähän.
Alkutarkastus
Ennen kuin laitteisto jätetään toimimaan ilman valvontaa, sen toimin-
taa on tarkkailtava ainakin kolme täyden jakson ajan. Tällöin on
varmistettava, että kaikki komponentit toimivat kunnolla. Jos laitteisto
ei toimi asianmukaisesti, ota yhteys sen toimittajaan..
!
LÆS DENNE VEJLEDNING GRUNDIGT FØR INSTALLA-
TION OG GEM DEN TIL SENERE BRUG
1 Drejeskive til indstillingsværdien
2 Indstillingsknap (adskilt pakning)
3 Kappe til afdækning af justeringen (adskilt pakning)
4 Differential indretning (kun justerbare differentiale modeller)
5 Skærm (ikke på modellerne A19AGC, A19AGF og BGC)
A19 er et temperatur kontrolapparat designet til føle temperaturerne.
Ifølge EN 60730 er det en, type 1 funktion, uafhængigt monteret udstyr
tilpasset til frontmontage på en plan front og til anvendelse i normale
omgivelser. Ved A19AGC, A19AGF og A19BGC modeller er betjenin-
gen inkorporeret.
Disse regulatorer er kun beregnet til at blive brugt som driftsregulatorer.
Hvis en fejl i en driftsregulator kan resultere i fare for personer eller
materielle skader, er installatøren ansvarlig for, at der installeres
anordninger eller systemer, som beskytter eller advarer mod fejl i
regulatoren.
Installation
DREJ IKKE PÅ DE FASTGJORTE SKRUER
!
Forsyningsspænding skal kobles fra før dæksel afmonteres.
!
Ved A19AGC, A19AGF og A19BGC afbrydes strømtilførslen før
betjeningen indstilles.
Elektrisk installation
Ledningsføring skal udføres i henhold til lokale forskrifter og må kun
udføres af autoriseret personale. Ved anvendelse af flerleder kabel,
skal der monteres kabelsko på endene.
Test procedure
Før installationen afsluttes. Observer mindst tre komplette betjenings
cyklusser, for at være sikker på, at alle komponenter fungerer korrekt.
Hvis det ikke er tilfældet, tag kontakt med Deres leverandør.
!
LES DENNE VEILEDNINGEN GRUNDIG FØR INSTALLE-
RING, OG GJEM DEN FOR FREMTIDIG BRUK.
1. Skive for settpunkt.
2. Justeringsknapp (pakket separat)
3. Hette for skjult justering (pakket separat)
4. Differensialarm (kun modeller med justerbar differensial)
5. Deksel (ikke modell A19AGC, A19AGF og BGC)
A19 er en temperaturregulator for føling av temperaturer.
Ifølge EN 60730 er det en, type 1 funksjon, uavhengig montert utstyr
tilpasset for frontmontasje på en plan front og for bruk i normalt
forurensede omgivelser. Modellene A19AGC, A19AGF og A19BGC er
kombinerte kontroller.
Disse regulatorene er kun konstruert for bruk som driftsregulatorer.
Hvis en feil på en driftsregulatur kan føre til fare for personer eller
materielle skader, er det installatørens ansvar å sørge for installering
av anordninger eller systemer som beskytter mot, eller advarer om, feil
på regulatoren.
Montering
IKKE VRI PÅ DE FORSEGLEDE SKRUENE
!
Koble fra tilførselspenning før deksel demonteres.
!
For A19AGC, A19AGF og A19BGC Frakoble strømforsyningen før
kontrollen justeres.
Kabling
Kabling skal utføres i samsvar med lokale forskrifter og må bare utføres
av autorisert personell. Ved bruk av fler-trådig kabel, bruk kabelsko på
endene.
Kontrollprosedyre
Før installasjonen forlates, må man observere minst tre komplette
driftssykluser, og være sikker på at alle komponenter funksjonerer
riktig. Hvis ikke må leverandøren kontaktes.
!
PORTUGUÊS
SVENSKA
SUOMI
NORSK
DANSK
∆IABAΣTE ΠP EKTIKA AYTEΣ ΤIΣ OI ΠPIN
APXIΣETE THN EΓKATAΣTAΣH KAI ΦYΛA¥TE TIΣ ΓIA
MEΛΛONTIKH XPHΣH
1 ∆ίσκïς επιλïγής τιµής αναæïράς
2 Kïυµπί ρύθµισης (øωριστά συσκευασµένï)
3 Kάλυµµα για κρυæή ρύθµιση (øωριστά συσκευασµένï)
4 MïøλÞς διαæïράς θερµïκρασίας (µÞνï σε µïντέλα µε
ρυθµιúÞµενη διαæïρά θερµïκρασίας)
5 Περίâληµα (δεν υπάρøει στα µïντέλα A19AGC, A19AGF και
BGC)
H συσκευή A19 είναι µïνάδα ελέγøïυ θερµïκρασίας σøεδιασµένη
να µετρά θερµïκρασίες
Σύµæωνα µε τï πρÞτυπï EN 60730 είναι µïνάδα ελέγøïυ δράσης
τύπïυ 1, ενσωµατïύµενη, κατάλληλη για τïπïθέτηση σε επίπεδη
επιæάνεια και για øρήση σε κανïνικές συνθήκες ρύπανσης. Tα
µïντέλα A19AGC, A19AGF και A19BGC είναι ενσωµατωµένες
διατάêεις ελέγøïυ.
Αυτïί ïι µηøανισµïί ελέγøïυ έøïυν σøεδιαστείώστε να
øρησιµïπïιηθïύν απïκλειστικάωςελεγκτέςλειτïυργίας.
Aπïτελεί ευθύνη τïυ τεøνικïύ εγκατάστασης να πρïσθέσει
µηøανισµïύς ή συστήµατα απïτρïπής ή πρïειδïπïίησης âλαâών
τïυ ελεγκτή, ώστε να απïτραπεί τï ενδεøÞµενï πρÞκλησης
σωµατικών âλαâών ή υλικών úηµιών στην περίπτωση κάπïιας
δυσλειτïυργίας τïυ ελεγκτή.
Eγκατάσταση
MHN ΣTPEΨETE TIΣ ΣΦPAΓIΣMENEΣ BI∆EΣ
!
ïσυνδέστε τη συσκευή απÞ τï ρευµατïλήπτη πριν
αæαιρέσετε τï κάλυµµα..
!
Για τις συσκευές A19AGC, A19AGF και A19BGC, πριν ρυθµίσετε
τη διάταêη ελέγøïυ, διακÞψτε την παρïøή ρεύµατïς.
Kαλωδίωση
Oλες ïι καλωδιώσεις θα πρέπει να συµµïρæώνïνται µε τïυς
τïπικïύς κανïνισµïύς και να πραγµατïπïιïύνται µÞνï απÞ
εêïυσιïδïτηµένï πρïσωπικÞ. Aν øρησιµïπïιείτε πïλύκλωνï
καλώδιï, âάλτε ένα κατάλληλï συνδετήρα στï άκρï τïυ
καλωδίïυ.
∆ιαδικασία τελικïύ ελέγøïυ
Πριν æύγετε απÞ τï øώρï της εγκατάστασης, παρατηρήστε
τïυλάøιστïν τρεις κύκλïυς λειτïυργίας για να âεâαιωθείτε Þτι
Þλα τα τµήµατα λειτïυργïύν σωστά. Σε διαæïρετική περίπτωση,
καλέστε τïν πρïµηθευτή τïυ υλικïύ.
H καθυστέρηση θα πρέπει να ελέγøεται µετά τï τέλïς της
διαδικασίας εγκατάστασης αλλά και σε τακτά øρïνικά διαστήµατα.
!
EΛΛHNIKA
ČESKY
!
Před instalací pozorpročtěte tento Montážní návod a
uložte jej na bezpečmísto pro případnou budoucí potřebu.
1 Stupnice bodu nastavení
2 Točítko pro nastavení (baleno samostatně)
3 Krytka pro skryté nastavení (balena samostatně)
4 Páčka nastavení diference (pouze příslušné modely)
5 Kryt (není u modelů A19AGC, A19AGF a BGC)
A19 je teplotní regulátor určený ke snímání teploty.
Podle EN 60730 je jeho provoz typu 1, nezávisle instalovaný regulátor,
vhodný pro montáž na rovný povrch a pro použití v podmínkách
běžného znečištění. Modely A19AGC, A19AGF a A19BGC jsou vhodné
jako vestavné zařízení.
Tyto regulátory jsou určeny pro použití pouze jako provozní. Pokud by
jejich selhání způsobilo zranění osob nebo poškození majetku, je
povinností osoby provádějící instalaci připojit zařízení nebo systémy,
které ochraňují nebo varují před selháním regulátoru.
Instalace
Neotáčejte zapečetěnými šrouby.
!
Před demontáí krytu odpojte přívod napájení.
!
Před nastavením regulátorů A19AGC, A19AGF a BGC odpojte
přívod napájení.
Zapojení
Veškeré zapojení musí odpovídat příslušným normám a musí být
provedeno pouze odpovědnými osobami. Při použití vícepramenného
vodiče nalisujte na jeho odizolovaný konec zakončovací dutinku.
Kontrola
Před tím, než opustíte instalované zařízení, zkontrolujte alespoň tři
kompletní provozní cykly, abyste se ujistili, že všechny součásti
pracují správně. V opačném případě se spojte se svým dodavatelem.
1 / 1

Johnson Controls A19A Uživatelský manuál

Typ
Uživatelský manuál