Yamaha CLP-S408PE Návod k obsluze

Kategorie
MIDI klávesy
Typ
Návod k obsluze

Tato příručka je také vhodná pro

MIDI-Datenformat
Format des données MIDI
Formato de datos MIDI
MIDI Data Format
CLP
-
470
CLP
-
440
CLP
-
430
CLP
-
S408
CLP
-
S406
CLP
-
465GP
ES
FR
DE
EN
2
CLP-470/440/430/S408/S406/465GP MIDI Data Format
MIDI Channel Message
MIDI Events
Status byte 1st Data byte 2nd Data byte
Transmitted Recognized
Status Data (HEX) Parameter Data (HEX) Parameter
Key Off 8nH (n: channel no.) kk Key no. (0 - 127) vv Velocity (0 - 127)
Key On 9nH kk Key no. (0 - 127) vv Key On: vv = 1 - 127
Key Off: vv = 0
Control Change BnH 0 (00H) Bank Select MSB 0 (00H) Normal
32 (20H) Bank Select LSB 0 - 127
1 (01H) Modulation 0 - 127 (...7FH)
6 (06H) Data Entry MSB 0 - 127 (...7FH)
38 (26H) Data Entry LSB 0 - 127 (...7FH)
7 (07H) Main Volume 0 - 127 (...7FH)
10 (0AH) Panpot 0 - 127 (...7FH)
11 (0BH) Expression 0 - 127 (...7FH)
64 (40H) Damper (Sustain) 0 - 127 (...7FH)
66 (42H) Sostenuto 0 - 127 (...7FH)
67 (43H) Soft Pedal 0 - 127 (...7FH)
71 (47H) Harmonic Content 0 - 127 (...7FH)
72 (48H) Release Time 0 - 127 (...7FH)
73 (49H) Attack Time 0 - 127 (...7FH)
74 (4AH) Brightness 0 - 127 (...7FH)
84 (54H) Portamento Control 0 - 127 (...7FH)
91 (5BH) Effect1 Depth
(Reverb Send Level)
0 - 127 (...7FH)
93 (5DH) Effect3 Depth
(Chorus Send Level)
0 - 127 (...7FH)
96 (60H) Increment 0 - 127 (...7FH)
97 (61H) Decrement 0 - 127 (...7FH)
100 (64H) RPN LSB 0 - 127 (...7FH)
101 (65H) RPN MSB 0 - 127 (...7FH)
Mode Message BnH 120 (78H) All Sound Off 0
121 (79H) Reset All Controller 0
122 (7AH) Local Control 0: OFF
7F: ON
123 (7BH) All Note Off 0
124 (7CH) OMNI OFF 0
125 (7DH) OMNI ON 0
126 (7EH) MONO 0 - 16 (...10H)
127 (7FH) POLY 0
Note
This instrument is fixed to Multi-timbral Mode and Poly Mode, since these modes do not change even when Omni on/ omni off/ Mono/
Poly Mode messages are received.
Program Change CnH pp 0 - 127
Channel After
T
ouch
DnH vv
Polyphonic After
T
ouch
AnH kk vv
Pitch Bend Change EnH cc LSB dd MSB
Realtime Message F8H MIDI Clock
FAH Start
FBH Continue
FCH Stop
FEH Active Sens
FFH System Reset
Note
When an Overrun or Framing error occurs, the Damper, Sostenuto and Soft are set to off in all channels, and All Notes Off is executed
.
: Can be transmitted and recognized.
: Cannot be transmitted by the panel operations,
but can be transmitted by song playback data.
: Cannot be transmitted or received.
CLP-470/440/S408/S406 CLP-430/465GP
P.C.# =Program Change Number P.C.# =Program Change Number
Voice Name MSB LSB
P. C . #
(0–127)
Voice Name MSB LSB
P. C . #
(0–127)
GRAND PIANO 1 108 0 0 GRAND PIANO 1 108 0 0
VARIATI ON 108 1 0 GRAND PIANO 2 108 2 0
GRAND PIANO 2 108 2 0 GRAND PIANO 3 108 0 1
VARIATI ON 108 3 0 GRAND PIANO 4 108 2 1
GRAND PIANO 3 108 0 1 E.PIANO 1 108 0 5
VARIATI ON 108 1 1 E.PIANO 2 108 0 4
GRAND PIANO 4 108 2 1 HARPSICHORD 108 0 6
VARIATI ON 108 3 1 PIPE ORGAN 1 108 1 19
E.PIANO 1 108 0 5 PIPE ORGAN 2 108 0 19
VARIATI ON 108 0 88 JAZZ ORGAN 108 0 16
E.PIANO 2 108 0 4 STRINGS 1 108 0 48
VARIATI ON 108 1 4 STRINGS 2 108 0 49
HARPSICHORD 108 0 6 CHOIR 108 0 52
VARIATI ON 108 1 6 VIBRAPHONE 108 0 11
PIPE ORGAN 108 1 19
VARIATI ON 108 0 19
JAZZ ORGAN 108 0 16
VARIATI ON 108 1 16
STRINGS 108 0
48
VARIATI ON 108 0 49
CHOIR 108 0 52
VARIATI ON 108 1 52
VIBES/GUITAR 108 0 11
VARIATI ON 108 0 24
WOOD BASS 108 0 32
VARIATI ON 108 1 32
E.BASS 108 0 33
VARIATI ON 108 0 35
CLP-470/440/430/S408/S406/465GP MIDI Data Format
3
PROGRAM CHANGE
Parameters controlled by RPN (Registered Parameter Numbers)
*For some Piano and Harpsichord Voices, the pitch may not be changed according to the pitch bend setting range.
RPN Data Entry
Parameter Data Range
MSB LSB MSB LSB
00H 00H mmH Pitch Bend Sensitivity* mm: 00H-18H (0...+24[semitones])
00H 01H mmH llH Fine Tune mm ll: 00H 00H -100[cent]
...
mm ll: 40H 00H 0[cent]
...
mm ll: 7FH 7FH 100[cent]
00H 02H mmH Coarse Tune mm: 28H-40H-58H
(-24...0...+24[semitones])
7FH 7FH Null
CLP-470/440/430/S408/S406/465GP MIDI Data Format
4
MIDI Parameter Change Table
MIDI PARAMETER CHANGE TABLE (XG SYSTEM)
TOTAL SIZE 7
(*1) Output when Init Send is transmitted.
(*2) When "XG ALL PARAMETER RESET" message is received, generates "XG SYSTEM ON" on the tone generator and generates reinitialization of the tuning value on the panel.
MIDI PARAMETER CHANGE TABLE (EFFECT 1)
MIDI PARAMETER CHANGE TABLE (EFFECT 2)
MIDI PARAMETER CHANGE TABLE (MULTI PART)
Address (H) Size (H) Data (H) Parameter Transmitted Recognized Description Default value (H)
00 00 00 4 0000 - 07FF MASTER TUNE -102.4 - +102.3[cent] 00 04 00 00
01
1st bit3 - 0
bit15 - 12
02
2nd bit3 - 0
bit11 - 8
03
3rd bit3 - 0
bit7 - 4
4th bit3 - 0
bit3 - 0
04 1 00 - 7F MASTER VOLUME 0 - 127 7F
05 1 00 - 7F (MASTER ATTENUATOR)
06 1 28 - 58 TRANSPOSE -12 - +12[semitones]
(MIDI value = 34H – 4CH)
40
7D n DRUM SETUP RESET n = Drum setup number
7E 00 XG SYSTEM ON
(*1)
00 = XG sytem ON
7F 00 ALL PARAMETER RESET
(*2)
00 = ON
Address (H) Size (H) Data (H) Parameter Transmitted Recognized Description Default
02 01 00 2 00 - 7F
00 - 7F
REVERB TYPE MSB
REVERB TYPE LSB
Refer to Effect MIDI Map (page 5) 01 (= HALL1)
00
02 01 20 2 00 - 7F
00 - 7F
CHORUS TYPE MSB
CHORUS TYPE LSB
Refer to Effect MIDI Map (page 5) 41 (= CHORUS1)
00
22 1 00 - 7F CHORUS PARAMETER 1
24 1 00 - 7F CHORUS PARAMETER 3
Address (H) Size (H) Data (H) Parameter Transmitted Recognized Description Default
03 n 00 2 00-7F
00-7F
INSERTION EFFECT TYPE MSB
INSERTION EFFECT TYPE LSB
05(=DELAY L,C,R)(*9)
00
0B 1 00-7F INSERTION EFFECT PARAMETER 10
0C 1 00-7F INSERTION EFFECT PART NUMBER
10 1 00-7F AC1 INSERTION CONTROL DEPTH
Address (H) Size (H) Data (H) Parameter Transmitted Recognized Description Default value (H)
8 nn 07 1 00 - 05 PART MODE
00 00 0C 1 00 - 7F VELOCITY SENSE DEPTH 0 - 127
0D 1 00 - 7F VELOCITY SENSE OFFSET 0 - 127
11 1 00 - 7F DRY LEVEL 0 - 127 7F
41 1 00 - 7F SCALE TUNING C
42 1 00 - 7F SCALE TUNING C#
43 1 00 - 7F SCALE TUNING D
44 1 00 - 7F SCALE TUNING D#
45 1 00 - 7F SCALE TUNING E
46 1 00 - 7F SCALE TUNING F
47 1 00 - 7F SCALE TUNING F#
48 1 00 - 7F SCALE TUNING G
49 1 00 - 7F SCALE TUNING G#
4A 1 00 - 7F SCALE TUNING A
4B 1 00 - 7F SCALE TUNING A#
4C 1 00 - 7F SCALE TUNING B
59 1 00 - 5F AC1 CONTROLLER NUMBER 0…95
CLP-470/440/430/S408/S406/465GP MIDI Data Format
5
System Exclusive Messages
MIDI EVENT Data Format
Transmitted Recognized
Universal System Exclusive MIDI Master Volume F0H 7FH 7FH 04H 01H ll mm F7H
ll mm Volume (mm = MSB, ll = LSB)
or
F0H 7FH XN 04H 01H ll mm F7H
XN When N is received N = 0 - F, whichever is received.
X = Ignored
ll mm Volume (mm = MSB , ll = LSB)
GM System On F0H 7EH 7FH 09H 01H F7H
or
F0H 7EH XN 09H 01H F7H
0xxxnnnn XN When N is received N = 0 - F, whichever is received.
X = Ignored.
XG
XG Parameter Change F0H 43H 1nH 4CH hh mm ll dd … F7H
hh mm ll Address
dd Data
XG Bulk Dump F0H 43H 0nH 4CH aa bb hh mm ll dd … dd cc F7H
0n Device Number n = 0 (send), 0 - f (receive)
aa bb Byte Count (aa << 7) + bb
hh mm ll Address
dd Data
cc Check SUM
Clavinova compliance
Internal Clock F0H 43H 73H 01H 02H F7H
External Clock F0H 43H 73H 01H 03H F7H
String Resonance Depth F0H 43H 73H 01H 50H 11H 0nH 02H dd F7
0n = Channel 00H ~ 0FH
dd = Depth 00H ~ 48H
Sustain Sample Depth F0H 43H 73H 01H 50H 11H 0nH 03H dd F7
0n = Channel 00H ~ 0FH
dd = Depth 00H ~ 48H
Key Off Sampling Depth F0H 43H 73H 01H 50H 11H 0nH 04H dd F7
0n = Channel 00H ~ 0FH
dd = Depth 00H ~ 50H
Others
Master Tune F0H 43H 1n 27H 30H 00H 00H mm ll cc F7H
1n Channel (0 (Send), 0 - f (receive) )
mm ll cc (mm << 4) + ll (1step/1cent), cc = Ignored
Effect MIDI Map (Reverb)
MS
B LSB
ROOM 02H 10H
HALL1 01H 10H
HALL2 01H 11H
STAGE 03H 10H
OFF 00H 00H
Effect MIDI Map (Effect)
MSB LSB
CHORUS 41H 08H
PHASER 48H 11H
TREMOLO 77H 00H
ROTARY SP 42H 12H
OFF 00H 00H
CLP-470/440/430/S408/S406/465GP MIDI Data Format
6
TransmittedFunction... Recognized Remarks
Basic
Channel
Note
Number : True voice
Velocity
After
Touch
Pitch Bend
Control
Change
Prog
Change : True #
System Exclusive
Common : Song Pos.
: Song Sel.
: Tune
System : Clock
Real Time : Commands
: All Sound Off
Aux :
Reset
All
Cntrls
: Local ON/OFF
Mes- : All Notes OFF
sages: Active Sense
: Reset
Notes:
Mode
Default
Changed
Note ON
Note OFF
Key’s
Ch’s
0,32
1
7
10
11
6,38
64,66,67
71-74
84
91,93
96-97
100-101
1 - 16
9nH,v=1-127
8nH,v=1-127
×
×
×
*1
×
*1
×
*1
×
*1
×
*1
0 - 127
**************
×
×
×
×
×
×
×
×
3
×
**************
0 - 127
**************
Mode 1 : OMNI ON , POLY Mode 2 : OMNI ON ,MONO
Mode 3 : OMNI OFF, POLY Mode 4 : OMNI OFF,MONO
×
*1 *2
1 - 16
9nH,v=1-127
9nH,v=0 or 8nH
0
-
24 semitones
×
×
×
×
(120,126,127)
(121)
(122)
(123-125)
×
3
×
×
0 - 127
0 - 127
: Yes
×
: No
Default
Messages
Altered
[ Digital Piano ] Date : 05-Oct-2010
Model CLP-470/440/430/S408/S406/465GP MIDI Implementation Chart
Version : 1.2
Bank Select
Modulation
Main Volume
Panpot
Expression
Data Entry
Pedal
Portamento Control
Effect Depth
RPN Inc,Dec
RPN LSB,MSB
0 - 127
*1 These Control Change messages cannot be transmitted by panel
operations, but can be transmitted by song playback data.
*2 For some Piano and Harpsichord Voices, the pitch may not be
changed according to the pitch bend setting range.
U.R.G., Digital Musical Instruments Division
© 2011 Yamaha Corporation
A0
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Yamaha CLP-S408PE Návod k obsluze

Kategorie
MIDI klávesy
Typ
Návod k obsluze
Tato příručka je také vhodná pro