Yamaha YDP-101 Uživatelský manuál

Kategorie
Hudební nástroje
Typ
Uživatelský manuál
IMPORTANT
Check your power supply
Make sure that your local AC
mains voltage matches the volt-
age specified on the name plate
on the bottom panel. In some ar-
eas a voltage selector may be
provided on the bottom panel of
the main keyboard unit near the
power cord. Make sure that the
voltage selector is set for the volt-
age in your area. The voltage se-
lector is set at 240V when the unit
is initially shipped. To change the
setting use a “minus” screwdriver
to rotate the selector dial so that
the correct voltage appears next
to the pointer on the panel.
WICHTIG
Überprüfung der Stromversorgung
Vergewissern Sie sich vor dem An-
schließen an das Stromnetz, daß die
örtliche Netzspannung den
Betriebsspannungswerten auf dem
Typenschild an der Unterseite des In-
struments entspricht. In bestimmten
Verkaufsgebieten ist das Instrument
mit einem Spannungswähler an der
Unterseite neben der Netzkabel-
durchführung ausgestattet. Falls vor-
handen, muß der Spannungswähler
auf die örtliche Netzspannung einge-
stellt werden. Der Spannungswähler
wurde werkseitig auf 240 V voreinge-
stellt. Zum Verstellen drehen Sie den
Spannungsregler mit einem Schlitz-
schraubendreher, bis der Zeiger auf
den korrekten Spannungswert weist.
IMPORTANT
Contrôler la source d’alimentation
Vérifiez que la tension spécifiée sur
le panneau inférieur correspond à
la tension du secteur. Dans certai-
nes régions, l’instrument peut être
équipé d’un sélecteur de tension si-
tué sur le panneau inférieur du cla-
vier à proximité du cordon d’alimen-
tation. Vérifiez que ce sélecteur est
bien réglé en fonction de la tension
secteur de votre région. Le sélec-
teur de tension est réglé sur 240 V
au départ d’usine. Pour modifier ce
réglage, utilisez un tournevis à
lame plate pour tourner le sélecteur
afin de mettre l’indication corres-
pondant à la tension de votre ré-
gion vis à vis du repère triangulaire
situé sur le panneau.
IMPORTANTE
Verifique la alimentación de
corriente
Asegúrese de que tensión de ali-
mentación de CA de su área corres-
ponde con la tensión especificada en
la placa de características del panel
inferior. En algunas zonas puede
haberse incorporado un selector de
tensión en el panel inferior de la
unidad del teclado principal, cerca del
cable de alimentación. Asegúrese de
que el selector de tensión esté
ajustado a la tensión de su área. El
selector de tensión se ajusta a 240V
cuando la unidad sale de fábrica. Para
cambiar el ajuste, emplee un destorni-
llador de cabeza “recta” para girar el
selector de modo que aparezca la
tensión correcta al lado del indicador
del panel.
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd.
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
IMPORTANT. The wires in this mains lead are coloured in accor-
dance with the following code:
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus may
not correspond with the coloured makings identifying the terminals
in your plug proceed as follows:
The wire which is coloured BLUE must be connected to the termi-
nal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth terminal of
the three pin plug.
(2 wires)
The serial number of this product may be found on the bottom of the
unit. You should note this serial number in the space provided below
and retain this manual as a permanent record of your purchase to aid
identification in the event of theft.
Model No.
Serial No.
(bottom)
3
YDP-101
Never insert or drop paper or metallic or other objects between the slits of
the key cover and the keyboard. If this happens, immediately turn off the
power and remove the electric plug from the outlet and have the instrument
inspected by qualified Yamaha service personnel.
Do not place the instrument against a wall (allow at least 3 cm/one-inch
from the wall), since this can cause inadequate air circulation, and possibly
result in the instrument overheating.
• Read carefully the attached documentation explaining the assembly pro-
cess. Failure to assemble the instrument in the proper sequence might re-
sult in damage to the instrument or even injury.
Do not operate the instrument for a long period of time at a high or uncom-
fortable volume level, since this can cause permanent hearing loss. If you
experience any hearing loss or ringing in the ears, consult a physician.
USING THE BENCH
Do not play carelessly with or stand on the bench. Using it as a tool or step-
ladder or for any other purpose might result in accident or injury.
Only one person should sit on the bench at a time, in order to prevent the
possibility of accident or injury.
If the bench screws become loose due to extensive long-term use, tighten
them periodically using the included tool.
SAVING USER DATA
Save all data to an external device such as the Yamaha MIDI Data Filer MDF3,
in order to help prevent the loss of important data due to a malfunction or
user operating error.
Yamaha cannot be held responsible for damage caused by improper use or modi-
fications to the instrument, or data that is lost or destroyed.
Always turn the power off when the instrument is not in use.
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep these precautions in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock,
short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
Do not open the instrument or attempt to disassemble the internal parts or
modify them in any way. The instrument contains no user-serviceable parts.
If it should appear to be malfunctioning, discontinue use immediately and
have it inspected by qualified Yamaha service personnel.
Do not expose the instrument to rain, use it near water or in damp or wet
conditions, or place containers on it containing liquids which might spill
into any openings.
If the power cord or plug becomes frayed or damaged, or if there is a sudden
loss of sound during use of the instrument, or if any unusual smells or
smoke should appear to be caused by it, immediately turn off the power
switch, disconnect the electric plug from the outlet, and have the instrument
inspected by qualified Yamaha service personnel.
Only use the voltage specified as correct for the instrument. The required
voltage is printed on the name plate of the instrument.
Before cleaning the instrument, always remove the electric plug from the
outlet. Never insert or remove an electric plug with wet hands.
Check the electric plug periodically and remove any dirt or dust which may
have accumulated on it.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the
instrument or other property. These precautions include, but are not limited to, the following:
Do not place the power cord near heat sources such as heaters or radiators,
and do not excessively bend or otherwise damage the cord, place heavy
objects on it, or place it in a position where anyone could walk on, trip over,
or roll anything over it.
When removing the electric plug from the instrument or an outlet, always
hold the plug itself and not the cord. Pulling by the cord can damage it.
Do not connect the instrument to an electrical outlet using a multiple-con-
nector. Doing so can result in lower sound quality, or possibly cause over-
heating in the outlet.
Remove the electric plug from the outlet when the instrument is not to be
used for extended periods of time, or during electrical storms.
Before connecting the instrument to other electronic components, turn off
the power for all components. Before turning the power on or off for all
components, set all volume levels to minimum.
Do not expose the instrument to excessive dust or vibrations, or extreme
cold or heat (such as in direct sunlight, near a heater, or in a car during the
day) to prevent the possibility of panel disfiguration or damage to the inter-
nal components.
Do not use the instrument near other electrical products such as televisions,
radios, or speakers, since this might cause interference which can affect
proper operation of the other products.
Do not place the instrument in an unstable position where it might acciden-
tally fall over.
Before moving the instrument, remove all connected cables.
When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners,
solvents, cleaning fluids, or chemical-impregnated wiping cloths. Also, do
not place vinyl, plastic or rubber objects on the instrument, since this might
discolor the panel or keyboard.
Do not rest your weight on, or place heavy objects on the instrument, and do
not use excessive force on the buttons, switches or connectors.
Take care that the key cover does not pinch your fingers, and do not insert a
finger or hand in the key cover gap.
(1)B_EL/CL-3vari.
1
* The illustrations and LCD screens as shown in this owner’s manual are for instruc-
tional purposes only, and may be different from the ones on your instrument.
4
YDP-101
Introduction
Thank you for choosing a Yamaha YDP-101 Digital Piano. Your YDP-101 is a fine musical instrument
that employs advanced Yamaha music technology. With the proper care, your YDP-101 will give you many
years of musical pleasure.
Stereo sampling of the acoustic piano voices offers unmatched realism and expressive
power, while the AWM (Advanced Wave Memory) tone generator system offers rich,
realistic reproductions of all other voices.
Piano-like touch response — adjustable in 4 stages — provides extensive expressive
control and outstanding playability.
Dual mode allows 2 voices to be played simultaneously.
Metronome feature with variable tempo facilitates practice.
2-track digital recorder lets you record and play back anything you play on the key-
board.
MIDI compatibility and a range of MIDI functions make the YDP-101 useful in a range
of advanced MIDI music systems.
Included Accessories
Owner’s Manual
Bench
Stereo Headphones
In order to make the most of your YDP-101’s performance potential and features, we urge you to read
this Owner’s Manual thoroughly, and keep it in a safe place for later reference.
2
5
YDP-101
Contents
The Control Panel .......................................................... 6
Key Cover & Music Stand .............................................. 8
Connections ................................................................... 9
Selecting & Playing Voices .......................................... 10
Playing the Demonstration Tunes ................................ 11
Voice Demo .............................................................. 11
Piano Song .............................................................. 12
Piano Song A-B Repeat .......................................... 13
Piano Song Part Cancel ......................................... 14
Synchro Start ..................................................... 14
Left Pedal Start/Stop ......................................... 14
The Dual Mode ............................................................ 15
Other Dual Mode Functions ............................... 15
Reverb ........................................................................ 16
Adjusting Reverb Depth ..................................... 16
The Pedals................................................................... 17
Damper (Right) Pedal ........................................ 17
Sostenuto (Center) Pedal .................................. 17
Soft (Left) Pedal ................................................. 17
Touch Sensitivity ......................................................... 18
Transposition ............................................................... 18
Tuning ......................................................................... 19
Tuning Up ........................................................... 19
Tuning Down ...................................................... 19
To Restore Standard Pitch ................................. 19
The Metronome & Tempo Control ................................ 20
The Metronome ........................................................ 20
Metronome Time Signature ............................... 20
Metronome Volume Function ............................. 20
Tempo Control ......................................................... 20
Using the Recorder ...................................................... 21
Recording ................................................................ 21
Changing the Initial Settings .............................. 22
Erasing a Single Track ....................................... 22
Playback................................................................... 23
Synchro Start ..................................................... 23
Left Pedal Start/Stop ......................................... 23
The Function Mode ...................................................... 24
To Select a Function … ...................................... 24
F1: Tuning ................................................................ 25
F2: Scale .................................................................. 25
F2.1: Scale ........................................................... 25
F2.2: Base Note ................................................... 25
F3: Dual Mode Functions ....................................... 26
F3.1: Dual Balance ............................................... 26
F3.2: Dual Detune ................................................ 26
F3.3: 1st Voice Octave Shift ................................. 26
F3.4: 2nd Voice Octave Shift ................................ 26
F3.5: Reset ........................................................... 26
F4: Left Pedal Mode ................................................ 27
F5: Metronome Volume ........................................... 27
F6: Piano Song Part Cancel Volume ...................... 27
F7: MIDI Functions .................................................. 28
A Brief Introduction to MIDI ............................... 28
F7.1: MIDI Transmit Channel Selection ................ 28
F7.2: MIDI Receive Channel Selection ................ 28
F7.3: Local Control ON/OFF ................................ 29
F7.4: Program Change ON/OFF .......................... 29
F7.5: Control Change ON/OFF ............................ 30
F7.6: MIDI Transmit Transpose ............................. 30
F7.7: Panel/Status Transmit .................................. 30
F7.8: Bulk Data Dump .......................................... 30
F8: Backup Functions............................................. 31
F8.1: Voice ............................................................ 31
F8.2: MIDI ............................................................. 31
F8.3: Tuning .......................................................... 31
F8.4: Pedal ........................................................... 31
Factory Preset Recall .................................................. 32
Troubleshooting ........................................................... 32
Options & Expander Modules ...................................... 32
Demo and Piano Song List................................................ 33
Factory Setting List............................................................ 34
MIDI Data Format................................................................ 35
MIDI Implementation Chart ............................................... 39
Keyboard Stand Assembly ................................................ 40
Specifications ..................................................................... 46
3
6
YDP-101
B0A0G0F0E0D0C0B-1A-1
C1 D1 E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3 D3 E3 F3 G3 A3 B3 C4 D4 E4 F4 G4 A4 B4 C5 D5 E5
MASTER VOLUME
MAXMIN
ROOM
HALL 1
HALL 2
STAGE
HARD
MEDIUM
SOFT
FUNCTION
2
TRACKSTART/
STOP REC
SONG
SELECT
/
NO
+
/
YES
SONGFUNCTIONTEMPO
1
METRO-
NOME
VARIATION
PIPE
ORGAN
STRINGS
HARPSI-
CHORD
E. PIANO
GRAND
PIANO
TOUCHREVERBTRANSPOSEDEMO
MASTER VOLUME
MAX
MIN
DEMO
TRANSPOSE
REVERB
ROOM
HALL1
HALL2
STAGE
TOUCH
HARD
MEDIUM
SOFT
GRAND
PIANO
E.PIANO
HARPSI-
CHORD
STRINGS
PIPE
ORGAN
VARIATION
234 56 7
The Control Panel
1 [POWER] Switch
Press the [POWER] switch once to turn the
power ON, a second time to turn the power OFF.
When the power is initially turned ON, a voice
selector LED will light, and the power indicator
located below the left end of the keyboard will light.
2 [MASTER VOLUME] Control
The [MASTER VOLUME] control adjusts the
volume (level) of sound produced by the YDP-101’s
internal stereo sound system. The [MASTER
VOLUME] control also adjusts headphone volume
when a pair of headphones is plugged into the
PHONES jack (page 9).
3 [DEMO] Button
Activates the demo playback mode in which you
can select playback of different demonstration
sequences for each of the YDP-101’s voices. See
page 11 for details.
4 [TRANSPOSE] Button
The [TRANSPOSE] button allows access to the
YDP-101’s TRANSPOSE function (to shift the pitch
of the entire keyboard up or down in semitone
intervals).
5 [REVERB] Button
The [REVERB] button selects a number of
digital reverb effects that you can use for extra depth
and expressive power. See page 16 for details.
6 [TOUCH] Button
The [TOUCH] button makes it easy to adjust the
touch response of the YDP-101 to match your
playing style. See page 18 for details.
7 Voice Selectors & [VARIATION] Button
Simply press any of the voice selectors to select
the corresponding voice. The voice selector LED
will light to indicate which voice is currently se-
lected. Press the [VARIATION] button so that its
indicator lights to select a variation of the currently
selected voice.
PHONES Jacks (Bottom panel) (See page 9)
Tuning keys (See page 19)
4
7
YDP-101
The Control Panel
There is also a dual mode in which two voices
can be played simultaneously across the full range of
the keyboard (see page 15 for details).
8 [METRONOME] Button
Turns the metronome sound on and off. The
[TEMPO /] buttons, below, are used to set the
tempo of the metronome sound. The [–/NO] and [+/
YES] buttons are used to change the time signature
(beat) of the metronome if used while the [METRO-
NOME] button is held — page 20.
9 [TEMPO /] (FUNCTION </>) Buttons
These buttons adjust the tempo of the metronome
function as well as the playback tempo of the re-
corder function. The tempo range is from 32 to 280
beats per minute — page 20. These same buttons are
also used to select functions — page 24.
0 [FUNCTION] Button
This button accesses a range of utility functions
— including the MIDI functions — that significantly
enhance versatility and playability. See page 24 for
details.
! [SONG] Button
This button enters the Piano Song Mode. While
in this mode you can use the [SONG SELECT /
] buttons to select from 50 songs.
@ [SONG SELECT /] (–/NO, +/YES) Buttons
These buttons select a piano song number for
playback, and are also used to adjust a range of other
parameters (i.e. their “–/NO” and “+/YES” func-
tions).
# [START/STOP] and [REC] Buttons
These buttons control the YDP-101’s recorder,
letting you record and play back just about anything
you play on the keyboard.
$ TRACK [1] and [2] Buttons
The YDP-101 has a 2-track recorder, and these
buttons are used to select the track(s) to be recorded
or played back. See page 21 for details.
% Pedals
The soft (left), sostenuto (center) and damper
(right) pedals provide a range of expressive control
capabilities similar to the pedal functions on an
acoustic piano. The left pedal can also be assigned to
the song start/stop operation. See page 17 for de-
tails.
%
Soft pedal
Damper pedal
Sostenuto pedal
F5 G5 A5 B5 C6
D6 E6 F6 G6 A6 B6 C7
POWER
DIGITAL PIANO YDP-101
METRO-
NOME
FUNCTION
12
TRACK
START
/
STOP
REC
SONG
SONG
SELECT
/
NO
+
/
YES
TEMPO
FUNCTION
1
890 !@ # $
5
8
YDP-101
To open the key cover:
ZLift the cover slightly (not too much).
XSlide the cover open.
Hold the cover with both hands when moving it, and do not release it until
it is fully opened or closed. Be careful to avoid catching fingers (yours or
others) between the cover and main unit.
Do not place objects on top of the key cover. Small objects placed on the
key cover may fall inside the main unit when the cover is opened and may
not be able to be removed. This could cause electric shock, short circuit,
fire or other serious damage to the instrument.
To close the key cover:
ZSlide the cover toward you.
XGently lower the cover over the keys.
Be careful to avoid catching your
fingers when opening or closing
the cover.
Key Cover & Music Stand
To raise the music stand:
ZPull the stand up and toward yourself as far as it will go.
XFlip down the two metal supports at the left and the right on the rear of
the music stand.
CLower the music stand so that it rests on the metal supports.
To lower the music stand:
ZPull the music stand toward yourself as far as it will go.
XRaise the two metal supports (at the rear of the stand).
CGently lower the music stand backward until it is all the way down.
Do not try to use the music stand in a half-raised position.
When lowering the stand, do not release your hands from the music stand
until it is all the way down.
Key Cover
Music Stand
6
9
YDP-101
Connections
1 AUX OUT L/L+R and R Jacks
The AUX OUT L/L+R and R jacks deliver the output of the YDP-101
for connection to an instrument amplifier, mixing console, PA system, or
recording equipment. If you will be connecting the YDP-101 to a monau-
ral sound system, use only the L/L+R jack. When a plug is inserted into
the L/L+R jack only, the left- and right-channel signals are combined and
delivered via the L/L+R jack so you don’t lose any of the YDP-101’s
sound.
The AUX OUT jack signal is not controlled by the YDP-101’s volume control.
Use the volume control on the external audio equipment to adjust the level.
2 PEDAL Jack
This terminal is for connecting the pedal cord from the pedal box (refer
to the “Keyboard Stand Assembly” on pages 40-45).
3 MIDI IN and OUT Connectors
The MIDI IN connector receives MIDI data from an external MIDI
device (such as a sequencer or MIDI instrument) which can be used to
control the YDP-101. The MIDI OUT connector transmits MIDI data
generated by the YDP-101 (e.g. note and velocity data produced by
playing the YDP-101 keyboard).
More details on MIDI are given in “MIDI Functions” on page 28.
PHONES Jacks
(Bottom Panel)
Two sets of standard stereo headphones can be plugged in here for
private practice or late-night playing. The internal speaker system is
automatically shut off when a pair of headphones is plugged into either of
the PHONES jacks.
AUX OUT
RL
/
L+R
Stereo System
123
MIDI
PEDAL
IN OUT
AUX OUT
RL
/
L+R
Sequencer
MIDI
IN OUT
7
10
YDP-101
After making sure that the YDP-101’s AC cord is properly plugged
into the YDP-101 itself and plugged into a convenient AC wall outlet,
press the [POWER] switch located to the right of the keyboard to turn
the power ON. In some areas a plug adaptor may be provided to match
the pin configuration of the AC wall outlets in your area.
When the power is turned ON, one of the voice selector LEDs will
light, and the power indicator located below the left end of the keyboard
will light.
Set the Volume ..................................................................................................
Initially set the [MASTER VOLUME] control about half way
between the “MIN” and “MAX” settings. Then, when you start playing,
re-adjust the [MASTER VOLUME] control for the most comfortable
listening level.
Select a Voice .....................................................................................................
Select the desired voice by pressing one of the voice selectors. Use
the [VARIATION] button to select a variation of the current voice, as
required.
Play................................................................................................................................
The YDP-101 also offers keyboard touch response, so the volume
and timbre of notes played can be controlled according to how “hard”
you play the keys. The amount of variation available depends on the
selected voice.
Add Reverb As Required .......................................................................
You can add or change reverb as desired by using the [REVERB]
button (page 16).
Selecting & Playing Voices
Turn Power On...................................................................................................
MASTER VOLUME
MAX
MIN
POWER
GRAND
PIANO
E.PIANO
HARPSI-
CHORD
STRINGS
PIPE
ORGAN
VARIATION
REVERB
ROOM
HALL1
HALL2
STAGE
8
11
YDP-101
Demonstration tunes are provided that effectively demonstrate each of the
YDP-101s voices. There are also 50 piano songs that you can play individually,
all in sequence, or in random order. Heres how you can select and play the
demo tunes.
NOTE
The demo or piano song mode cannot be engaged while the recorder (page 21) is in use.
No MIDI reception occurs in the demo/piano song mode.
The demo/piano song data is not transmitted via the MIDI connectors.
* See page 33 for a complete listing of the demo tunes and piano songs.
Playing the Demonstration Tunes
Engage the Demo Mode .........................................................................
Play a Voice Demo.........................................................................................
Press one of the voice selectors to start playback of all songs starting
from the corresponding voice demo tune — featuring the voice nor-
mally selected by that voice selector button. (If you press the [START/
STOP] button instead of a voice selector button, the GRAND PIANO
demo tune will begin playback.) The indicator of the selected voice
selector button will flash during playback, and “- - -” will appear on the
LED display. You can start playback of any other voice demo tune
during playback by simply pressing the corresponding voice selector.
You can stop playback at any time by pressing the [START/STOP]
button or the voice selector of the currently playing demo.
NOTE
Use the [MASTER VOLUME] control to adjust the volume.
Press the [DEMO] button to engage the demo mode — the voice
selector indicators will flash in sequence.
Voice Demo
Exit From the Demo Mode....................................................................
Press the [DEMO] button to exit from the demo mode and return to
the normal play mode.
DEMO
DEMO
GRAND
PIANO
E.PIANO
HARPSI-
CHORD
STRINGS
PIPE
ORGAN
9
12
YDP-101
Playing the Demonstration Tunes
Engage the Piano Song Mode .........................................................
Play a Piano Song .........................................................................................
To play any of the 50 piano songs provided, use the [SONG SE-
LECT /] buttons to select the number of the tune you want to play
(the number will appear on the LED display), then press the [START/
STOP] button. Playback will stop automatically when playback of the
selected piano song has finished.
Select “ALL” instead of a number to play all piano songs in se-
quence, or select “rnd” to continuously play all piano songs in ran-
dom order. Press the [START/STOP] button to stop playback.
Use the [MASTER VOLUME] control to adjust the volume.
You can use the [TEMPO
/
] buttons to adjust the playback tempo as
required. This produces a relative tempo variation, with a range from -50
through - - - to 50 at maximum; the range will differ depending on the
selected song.
The default tempo - - - is automatically selected whenever a new piano
song is selected, or playback of a new piano song begins during
ALL
or
rnd
playback.
You can play the keyboard along with the piano song playback. The voice
playing on the keyboard can be changed.
You can change the Reverb type that is applied to the voice you play on
the keyboard and for the piano song playback. You can change the Touch
sensitivity that is applied to the voice you play on the keyboard. When a
new piano song is selected or a new piano song is automatically started
in continuous play, the HALL 1 reverb type will automatically be selected.
Press the [SONG] button to engage the piano song mode — the
[SONG], [1] and [2] indicators will light.
Piano Song
Exit From the Piano Song Mode....................................................
Press the [SONG] button to exit from the piano song mode, the
indicator will go off, and return to the normal play mode.
SONG
START
/
STOP
SONG
SELECT
/
NO
+
/
YES
SONG
10
13
YDP-101
Piano Song A-B Repeat
The A-B Repeat function can be used to continuously repeat a
specified phrase within a piano song. Combined with the Part Cancel
function described below, this provides an excellent way to practice
difficult phrases.
Specify the Beginning (A) of the Phrase..............................
Select and play a piano song, then press the [FUNCTION] button at
the beginning of the phrase you want to repeat. This sets the “A” point
(“A-” will appear on the display).
To set the “A” point at the very beginning of the song, press the
[FUNCTION] button before starting playback.
Specify the End (B) of the Phrase ...............................................
Press the [FUNCTION] button a second time at the end of the
phrase. This sets the “B” point (“A-b will appear on the display). At
this point repeat playback will begin between the specified A and B
points.
Stop Playback....................................................................................................
Press the [START/STOP] button to stop playback while retaining
the specified A and B points. A-B repeat playback will resume if the
[START/STOP] button is then pressed again.
To cancel the A and B points press the [FUNCTION] button once.
NOTE
The A and B points are automatically canceled when a new song is
selected.
The A-B Repeat function cannot be used during
ALL
or
rnd
playback.
FUNCTION
FUNCTION
12
TRACK
START
/
STOP
REC
Playing the Demonstration Tunes
11
14
YDP-101
Piano Song Part Cancel
The 50 piano songs have separate left- and right-hand parts that can
be turned on and off as required so you can practice the corresponding
part on the keyboard. The right-hand part is played by the recorder’s [1]
track, and the left-hand part is played by recorder’s [2] track. (Some of
the songs are arrangements for four-hands, tracks [1] and [2] corre-
spond to primo and secondo parts of the arrangement.)
Turn the Desired Part Off.......................................................................
Press the TRACK [1] or [2] button to turn the corresponding part off
— the corresponding indicator will go out (these buttons alternately
toggle the corresponding part on and off).
NOTE
The parts can be turned on or off even during playback.
The Piano Song Part Cancel function cannot be used during
ALL
or
rnd
playback.
The Piano Song Part Cancel Volume function described on page 27 can
be used to set the canceled part so that it plays at a volume from 0 (no
sound) to 20. The default setting is 5.
Both parts are automatically turned ON whenever a new song is selected.
Start/Stop Playback.....................................................................................
Press the [START/STOP] button to start and stop playback as
required.
Synchro Start .....................................................................................................
When the Synchro Start function is engaged, playback of the se-
lected piano song will begin automatically as soon as you start playing
on the keyboard.
To engage the Synchro Start function press the [START/STOP]
button while holding the part button corresponding to the part which is
ON. A dot will appear in the lower right corner of the display. (Repeat
the previous operation to disengage the Syncro Start function.)
Playback will then start as soon as you begin playing on the key-
board.
NOTE
If you hold a track button which is OFF while pressing the [START/STOP]
button, that track will be turned ON and the Synchro Start mode will be
engaged.
Left Pedal Start/Stop ..................................................................................
The left pedal can be assigned to start and stop piano song playback
via the “Left Pedal Mode” function described on page 27.
Playing the Demonstration Tunes
12
TRACK
START
/
STOP
REC
12
TRACK
START
/
STOP
REC
12
TRACK
START
/
STOP
REC
12
15
YDP-101
The Dual Mode
The dual mode makes it possible to play two voices simultaneously across
the entire range of the keyboard.
To activate the dual mode simply press two voice selectors at the
same time (or press one voice selector while holding another). The
voice indicators of both selected voices will light when the dual mode is
active. To return to the normal single-voice play mode, press any single
voice selector.
According to the voice numbering priority as shown in the diagram
on the left, lower valued voice numbers will be designated as the 1st
Voice (the other voice will be designated as the 2nd Voice).
The [STRINGS] [VARIATION] voice has a slow attack. This
voice can sometimes be used with another voice in the Dual Mode to
produce a better “blend”.
NOTE
The [VARIATION] button indicator will light if the variation is engaged for
either or both of the dual-mode voices. While the dual mode is engaged
the [VARIATION] button can be used to turn the variation for both voices
on or off. To use the variation for only one of the voices the setting must
be made prior to engaging the dual mode.
[REVERB] in the Dual Mode
The reverb type assigned to the 1st Voice will take priority over the other.
(If the reverb is set to OFF, the 2nd Voices reverb type will be in affect.)
Reverb depth setting via the panel controls (i.e. pressing the [-/NO] or [+/
YES] buttons while holding the [REVERB] button see page 16) will be
applied to the 1st Voice only.
Other Dual Mode Functions ...............................................................
The YDP-101 Function mode provides access to a number of other
dual-mode functions, listed below. See the corresponding pages for
details.
Dual Balance ................................................. 26
Dual Detune .................................................. 26
1st Voice Octave Shift ................................... 26
2nd Voice Octave Shift .................................. 26
Reset ............................................................. 26
Voice numbering priority
1 2 3 4 5
GRAND
PIANO
E.PIANO
HARPSI-
CHORD
STRINGS
PIPE
ORGAN
P
IANO
HARPSI-
CHORD
STRINGS
PIP
E
ORG
A
13
16
YDP-101
Reverb
The [REVERB] button selects a number of digital reverb effects that you can
use for extra depth and expressive power.
To select a reverb type press the [REVERB] button a few times until
the indicator corresponding to the desired type lights (the indicators
light in sequence each time the [REVERB] button is pressed). No
reverb is produced when all indicators are off.
OFF
No reverb effect is selected when no REVERB indicator is lit.
ROOM
This setting add a continuous reverb effect to the sound that is similar
to the type of acoustic reverberation you would hear in a room.
HALL 1
For a bigger reverb sound, use the HALL 1 setting. This effect
simulates the natural reverberation of a small-size concert hall.
HALL 2
For a really spacious reverb sound, use the HALL 2 setting. This effect
simulates the natural reverberation of a large concert hall.
STAGE
A simulation of the type of reverb produced in a stage environment.
NOTE
The default reverb type (including OFF) and depth settings are different
for each voice.
Adjusting Reverb Depth .........................................................................
Adjust the reverb depth for the selected voice by using the [–/NO]
and [+/YES] buttons while holding the [REVERB] button. The depth
range is from 0 through 20 (the current depth setting appears on the
LED display while the [REVERB] button is held). A setting of “0”
produces no effect, while a setting of “20” produces maximum reverb
depth. Press the [–/NO] and [+/YES] buttons simultaneously while
holding the [REVERB] button to recall the default setting for the
current voice (default depth settings are different for each voice).
REVERB
ROOM
HALL1
HALL2
STAGE
REVERB
ROOM
HALL1
HALL2
STAGE
SONG
SELECT
/
NO
+
/
YES
14
17
YDP-101
The Pedals
Soft (Left) Pedal ...............................................................................................
The soft pedal reduces the volume and slightly changes the timbre of
notes played while the pedal is pressed. The soft pedal will not affect
notes which are already playing when it is pressed.
The left pedal can also be assigned to the song start/stop operation
via the “Left Pedal Mode” described on page 27.
The YDP-101 has three foot pedals that produce a range of expressive
effects similar to those produced by the pedals on an acoustic piano.
Soft pedal
Damper pedal
Sostenuto pedal
Sostenuto (Center) Pedal ......................................................................
If you play a note or chord on the keyboard and press the sostenuto
pedal while the note(s) are held, those notes will be sustained as long as
the pedal is held (as if the damper pedal had been pressed) but all
subsequently played notes will not be sustained. This makes it possible
to sustain a chord, for example, while other notes are played “staccato.
NOTE
Organ and string voices will continue to sound for as long as the soste-
nuto pedal is depressed.
Damper (Right) Pedal ................................................................................
The damper pedal functions in the same way as a damper pedal on
an acoustic piano. When the damper pedal is pressed notes played have
a long sustain. Releasing the pedal immediately stops (damps) any
sustained notes.
15
18
YDP-101
Touch Sensitivity
Four different types of keyboard touch sensitivity HARD, MEDIUM, SOFT
or FIXED can be selected to match different playing styles and preferences.
To select a touch sensitivity type press the [TOUCH] button a few
times until the indicator corresponding to the desired type lights (the
indicators light in sequence each time the [TOUCH] button is pressed).
HARD
The HARD setting requires the keys to be played quite hard to
produce maximum loudness.
MEDIUM
The MEDIUM setting produces a fairly standard keyboard response.
This is the initial factory default setting.
SOFT
The SOFT setting allows maximum loudness to be produced with
relatively light key pressure.
FIXED (no indicator lit)
All notes are produced at the same volume no matter how hard the
keyboard is played.
When the FIXED type is selected, the volume of notes played in the
FIXED mode can be set by using the [/NO] and [+/YES] buttons while
the [TOUCH] button is held (the current volume level appears on the
display). The volume range is from 1 through 127. The default setting
is 64.
NOTE
This setting does not change the weight of the keyboard.
The touch sensitivity type and volume set in the FIXED mode will become
the common setting for all voices.
Transposition
Use the [–/NO] or [+/YES] button while holding the [TRANS-
POSE] button to transpose down or up as required. The transposition
range is from “–12” (down one octave) through “0” (normal pitch) to
“12” (up one octave). The amount of transposition appears on the LED
display while the [TRANSPOSE] button is held. The default transpose
setting is “0”.
NOTE
The [TRANSPOSE] button indicator remains lit when a transpose setting
other than 0 is selected.
Notes below and above the A-1 C7 range of the YDP-101 sound one
octave higher and lower, respectively.
The YDP-101s TRANSPOSE function makes it possible to shift the pitch of
the entire keyboard up or down in semitone intervals up to a maximum of 12
semitones (i.e. a maximum of one octave up or down). Transposing the pitch of
the YDP-101 keyboard facilitates playing in difficult key signatures, and you can
easily match the pitch of the keyboard to the range of a singer or other instru-
mentalist.
TOUCH
HARD
MEDIUM
SOFT
TRANSPOSE
SONG
SELECT
/
NO
+
/
YES
16
19
YDP-101
Tuning
Tuning makes it possible to adjust the pitch of the YDP-101 over a 427.0 Hz
453.0 Hz (corresponding to the A3 notes Hz) range in approximately 0.2
Hertz intervals. Pitch control is useful for tuning the YDP-101 to match other
instruments or recorded music.
Tuning Up ...............................................................................................................
Z To tune up (raise pitch), hold the A-1 and B-1 keys simultaneously.
X Press any key between C3 and B3. Each time a key in this range is
pressed the pitch is increased by approximately 0.2 Hz.
The [–/NO] and [+/YES] buttons can also be used to tune down or up,
respectively, in
approximately
1 Hz
decrements/
increments. Press the
[–/NO] and [+/YES] buttons simultaneously to recall standard tuning
(A3 = 440 Hz).
C Release the A-1 and B-1 keys.
Tuning Down .......................................................................................................
Z To tune down (lower pitch), hold the A-1 and A#-1 keys simulta-
neously.
X Press any key between C3 and B3. Each time a key in this range is
pressed the pitch is decreased by approximately 0.2 Hz.
The [–/NO] and [+/YES] buttons can also be used to tune down or up,
respectively, in
approximately
1 Hz
decrements/
increments. Press the
[–/NO] and [+/YES] buttons simultaneously to recall standard tuning
(A3 = 440 Hz).
C Release the A-1 and A#-1 keys.
To Restore Standard Pitch...................................................................
Z To restore the default pitch (A3 = 440 Hz), hold the A-1, A#-1 and
B-1 keys simultaneously.
X Press any key between C3 and B3.
C Release the A-1, A#-1 and B-1 keys.
In terms of “Hertz”, the overall tuning range is from 427.0 Hz to 453.0
Hz. The current tuning setting is shown on the LED display while the tuning
is being adjusted. Tenths of a Hertz are indicated on the LED display by the
appearance and position of one or two dots, as in the following example:
NOTE
An alternative tuning method is available in the Function mode page 25.
Display Value
440 440.0
4.40 440.2
44.0 440.4
440. 440.6
4.40. 440.8
C
3
B
3
A
-1
B
-1
SONG
SELECT
/
NO
+
/
YES
SONG
SELECT
/
NO
+
/
YES
A
-1
A#
-1
C
3
B
3
A
-1
B
-1
A#
-1
C
3
B
3
17
20
YDP-101
The Metronome & Tempo Control
The YDP-101 built-in metronome is a convenient feature for practice, and it
can also provide a solid rhythmic guide when recording using the Recorder
feature, described in the next section.
The Metronome
The metronome sound is alternately turned on and off by pressing
the [METRONOME] button. When on, the beat indicator flashes at the
current tempo.
Metronome Time Signature.................................................................
The time signature (beat) of the metronome can be set by using the
[–/NO] and [+/YES] buttons while holding the [METRONOME]
button. You can set the beat to 0, 2, 3, 4 or 6 (the current setting appears
on the LED display while the [METRONOME] button is held). Press
the [–/NO] and [+/YES] buttons simultaneously while holding the
[METRONOME] button to recall the default setting “0” (no accent).
Metronome Volume Function ............................................................
The volume of the metronome sound can be adjusted via the Metro-
nome Volume function in the Function mode—page 27.
Tempo Control
The tempo of the metronome and recorder playback (the recorder is
described in the next section) can be set from 32 to 280 beats per
minute by using the [TEMPO t/s] buttons. The selected tempo will
appear on the LED display while in the normal play mode and while the
[TEMPO t/s] buttons are being used to adjust the tempo in the
recording/playback mode. The default tempo (120 or the recorded song
tempo when the recorder contains data and the playback track indicator
is lit) can be recalled by simultaneously pressing the [t] and [s]
buttons.
Beat indicator
METRO-
NOME
TEMPO
FUNCTION
SONG
SELECT
/
NO
+
/
YES
METRO-
NOME
18
1 / 1

Yamaha YDP-101 Uživatelský manuál

Kategorie
Hudební nástroje
Typ
Uživatelský manuál