Yamaha RY9 Uživatelský manuál

Kategorie
Hudební nástroje
Typ
Uživatelský manuál
OWNER’S MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
RHYTHM PROGRAMMER
This product utilizes batteries or an external
power supply (adapter). DO NOT connect this
product to any power supply or adapter other
than one described in the manual, on the
name plate, or specifically recommended by
Yamaha.
WARNING: Do not place this product in a
position where anyone could walk on, trip over,
or roll anything over power or connecting cords
of any kind. The use of an extension cord is
not recommended! IF you must use an
extension cord, the minimum wire size for a 25'
cord (or less) is 18 AWG. NOTE: The smaller
the AWG number, the larger the current
handling capacity. For longer extension cords,
consult a local electrician.
This product should be used only with the
components supplied or; a cart, rack, or stand
that is recommended by Yamaha. If a cart,
etc., is used, please observe all safety
markings and instructions that accompany the
accessory product.
SPECIFICATIONS SUBJECT TO CHANGE:
The information contained in this manual is
believed to be correct at the time of printing.
However, Yamaha reserves the right to change
or modify any of the specifications without
notice or obligation to update existing units.
This product, either alone or in combination
with an amplifier and headphones or
speaker/s, may be capable of producing sound
levels that could cause permanent hearing
loss. DO NOT operate for long periods of time
at a high volume level or at a level that is
uncomfortable. If you experience any hearing
loss or ringing in the ears, you should consult
an audiologist.
IMPORTANT: The louder the sound, the
shorter the time period before damage occurs.
Some Yamaha products may have benches
and / or accessory mounting fixtures that are
either supplied with the product or as optional
accessories. Some of these items are
designed to be dealer assembled or installed.
Please make sure that benches are stable and
any optional fixtures (where applicable) are
well secured BEFORE using.
Benches supplied by Yamaha are designed for
seating only. No other uses are recommended.
NOTICE:
Service charges incurred due to a lack of
knowledge relating to how a function or effect
works (when the unit is operating as designed)
are not covered by the manufacturer’s
warranty, and are therefore the owners
responsibility. Please study this manual
carefully and consult your dealer before
requesting service.
ENVIRONMENTAL ISSUES:
Yamaha strives to produce products that are
both user safe and environmentally friendly.
We sincerely believe that our products and the
production methods used to produce them,
meet these goals. In keeping with both the
letter and the spirit of the law, we want you to
be aware of the following:
Battery Notice:
This product MAY contain a small non-
rechargeable battery which (if applicable) is
soldered in place. The average life span of this
type of battery is approximately five years.
When replacement becomes necessary,
contact a qualified service representative to
perform the replacement.
This product may also use “household” type
batteries. Some of these may be
rechargeable. Make sure that the battery being
charged is a rechargeable type and that the
charger is intended for the battery being
charged.
When installing batteries, do not mix batteries
with new, or with batteries of a different type.
Batteries MUST be installed correctly.
Mismatches or incorrect installation may result
in overheating and battery case rupture.
Warning:
Do not attempt to disassemble, or incinerate
any battery. Keep all batteries away from
children. Dispose of used batteries promptly
and as regulated by the laws in your area.
SPECIAL MESSAGE SECTION
PDF01_E.qx 6/2/99 5:42 PM Page 2
Note: Check with any retailer of household
type batteries in your area for battery disposal
information.
Disposal Notice:
Should this product become damaged beyond
repair, or for some reason its useful life is
considered to be at an end, please observe all
local, state, and federal regulations that relate
to the disposal of products that contain lead,
batteries, plastics, etc. If your dealer is unable
to assist you, please contact Yamaha directly.
NAME PLATE LOCATION:
The name plate is located on the bottom of the
product. The model number, serial number,
power requirements, etc., are located on this
plate. You should record the model number,
serial number, and the date of purchase in the
spaces provided below and retain this manual
as a permanent record of your purchase.
Model
Serial No.
Purchase Date
ON STANDBY
OUTPUT
MIDI
EXT IN DC IN
L/MONO
OUT IN
R
PLEASE KEEP THIS MANUAL
92-BP
FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements.
Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the
product.
2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure
to follow instructions could void your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations,
Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of
assurance that your use of this product in a residential environment will not result in harmful interference with
other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used
according to the instructions found in the users manual, may cause interference harmful to the operation of
other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur
in all installations. If this product is found to be the source of interference, which can be determined by turning
the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon
lead, change the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation
of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its
subsidiaries.
PDF01_E.qx 6/2/99 5:42 PM Page 3
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep these precautions in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious
injury or even death from electrical shock, short-circuiting, damages, fire or other
hazards. These precautions include, but are not limited to, the following:
Do not open the instrument or attempt to disassemble the internal parts or modify them in any way. The instrument
contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have
it inspected by qualified Yamaha service personnel.
Do not expose the instrument to rain, use it near water or in damp or wet conditions, or place containers on it
containing liquids which might spill into any openings.
If the AC adaptor cord or plug becomes frayed or damaged, or if there is a sudden loss of sound during use of the
instrument, or if any unusual smells or smoke should appear to be caused by it, immediately turn off the power
switch, disconnect the adaptor plug from the outlet, and have the instrument inspected by qualified Yamaha service
personnel.
Use the specified adaptor (PA-3B or an equivalent recommended by Yamaha) only. Using the wrong adaptor can
result in damage to the instrument or overheating.
Before cleaning the instrument, always remove the electric plug from the outlet. Never insert or remove an electric
plug with wet hands.
Check the electric plug periodically and remove any dirt or dust which may have accumulated on it.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical
injury to you or others, or damage to the instrument or other property. These
precautions include, but are not limited to, the following:
Do not place the AC adaptor cord near heat sources such as heaters or radiators, and do not excessively bend or
otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip
over, or roll anything over it.
When removing the electric plug from the instrument or an outlet, always hold the plug itself and not the cord.
Do not connect the instrument to an electrical outlet using a multiple-connector. Doing so can result in lower
sound quality, or possibly cause overheating in the outlet.
Unplug the AC power adaptor when not using the instrument, or during electrical storms.
Always make sure all batteries are inserted in conformity with the +/- polarity markings. Failure to do so might
result in overheating, fire, or battery fluid leakage.
Always replace all batteries at the same time. Do not use new batteries together with old ones. Also, do not mix
battery types, such as alkaline batteries with manganese batteries, or batteries from different makers, or different
types of batteries from the same maker, since this can cause overheating, fire, or battery fluid leakage.
Do not dispose of batteries in fire.
I
(4)-5
PDF01_E.qx 6/2/99 5:42 PM Page 4
Do not attempt to recharge batteries that are not intended to be charged.
If the instrument is not to be in use for a long time, remove the batteries from it, in order to prevent possible fluid
leakage from the battery.
Keep batteries away from children.
Before connecting the instrument to other electronic components, turn off the power for all components. Before
turning the power on or off for all components, set all volume levels to minimum. Also, be sure to set the volumes
of all components at their minimum levels and gradually raise the volume controls while playing the instrument to
set the desired listening level.
Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight,
near a heater, or in a car during the day) to prevent the possibility of panel disfiguration or damage to the internal
components.
Do not use the instrument near other electrical products such as televisions, radios, or speakers, since this might
cause interference which can affect proper operation of the other products.
Do not place the instrument in an unstable position where it might accidentally fall over.
Before moving the instrument, remove all connected adaptor and other cables.
When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners, solvents, cleaning fluids, or
chemical-impregnated wiping cloths. Also, do not place vinyl, plastic or rubber objects on the instrument, since
this might discolor the panel or keyboard.
Do not rest your weight on, or place heavy objects on the instrument, and do not use excessive force on the
buttons, switches or connectors.
Do not operate the instrument for a long period of time at a high or uncomfortable volume level, since this can
cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician.
DATA BACK-UP AND STORAGE
Yamaha recommends that you regularly save your music data using an external MIDI data storage device (such as
the Yamaha MDF3 MIDI Data Filer), and storing the floppy disks in a safe, cool, dry place. YAMAHA CANNOT BE
HELD RESPONSIBLE FOR THE ACCIDENTAL LOSS OF IMPORTANT MUSIC DATA! Regarding the User memory,
as long as fresh batteries are inserted in (or an AC power adaptor is connected to) the RY9, the User pattern, song
and drum kit data will be retained, even when the power is turned off. It will also be retained long enough to
exchange an old set of batteries for a new set. If you have important data in the RY9 which you don’t want to lose,
please take care to keep fresh batteries inserted in (or keep an AC power adaptor connected to) the RY9, and to
regularly save it to an external MIDI data storage device.
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or
data that is lost or destroyed.
Always turn the power off when the instrument is not in use.
Make sure to discard used batteries according to local regulations.
II
English
01_IntroE.qx 7/2/99 6:02 PM Page 5
THANK YOU FOR PURCHASING
THE YAMAHA RY9 RHYTHM PROGRAMMER.
The Yamaha RY9 is a full-featured, high quality, low-priced, hand-held stereo
rhythm programmer with accompaniment backing and guitar input that’s the
perfect “pocket pal” for the guitarist on the go.
With its compact size, friendly user interface, wide variety of preprogrammed
patterns and songs, user programming capabilities, versatile MIDI features and
more, the handy RY9—which easily slips into a guitar case or gig bag—is
ready to plug and play anytime and anywhere. It’s the ideal music practicing
companion and composing sketch pad.
Whether you’re a professional or amateur guitarist, a serious songwriter or
simply a music hobbyist, you’ll find the RY9 a unique and powerful addition to
your arsenal of music tools. You’ll be surprised by its full, dynamic stereo
sound quality when played through a high quality audio monitoring system.
You’ll also appreciate being able to plug in a guitar and headphones and work in
privacy without disturbing others—or better yet, without others disturbing you!
To take full advantage of the RY9’s many features and music making
capabilities, please read this owner’s manual carefully to familiarize yourself
with the proper operating procedures. Also, keep this manual in a safe place
for future reference.
III
PDF01_E.qx 6/2/99 5:42 PM Page 6
CONVENTIONS USED IN THIS MANUAL.
In order to keep confusion to a minimum, there are a few basic conventions
used in the feature explanations in this manual, as follows:
Names of key features are written in the cap-low style; e.g., Pattern Mode,
Song Record Mode, System Mode Sync function, User patterns, etc.
Names of controls and connectors are written in all-caps within brackets;
e.g., [EXT IN] jack, [VOLUME] slider, [DELETE] button, etc.
Special prompts or words which appear on the LCD screen during operation
are written in quotes; e.g., “NEXT”, “CHAIN”, “accnt”, “COPY SURE?”, etc.
Everything else will be written in the lower case style.
PLEASE KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE !
IV
PDF01_E.qx 6/2/99 5:42 PM Page 7
HOW TO USE THIS MANUAL.
The RY9 Owner’s Manual is designed to travel alongside the RY9 itself. It
includes information about all the RY9’s features and operation procedures,
organized in such a way as to permit quick and easy access to any feature you
need to locate. The main sections of the Owner’s Manual are as follows:
BEFORE YOU BEGIN
A brief overview of the RY9’s capabilities and system structure, as well as
descriptions of all panel features—everything you need to know before you
begin using the RY9 in order to put its many features and capabilities into
proper context.
GETTING STARTED
A step-by-step guide through setting up the RY9, turning on the power, playing
the demo songs and performing basic pattern, song and drum kit operations—
everything you need to get started enjoying the RY9 right away.
MODES & FUNCTIONS
An extensive feature reference of the various modes and functions of the
RY9—everything you need to know about all operating procedures.
APPENDIX
A collection of technical charts and lists including display messages,
troubleshooting, drum voice and pattern lists, MIDI implementation chart and
more.
INDEX
An alphabetical list of topics which gives you quick and easy access to any
subject in the manual you want to locate.
The illustrations and LCD screens as shown in this owner’s manual are for
instructional purposes only, and may appear somewhat different from those on
your instrument.
V
PDF01_E.qx 6/2/99 5:42 PM Page 8
BEFORE YOU BEGIN..............................................2
1. THE RY9 ................................................................2
2. RY9 SYSTEM STRUCTURE ......................................4
3. TOP PANEL ............................................................7
4. SIDE & REAR PANELS ..........................................10
GETTING STARTED ..............................................12
5. SETUP & POWER-ON ............................................12
6. PLAYING THE DEMO SONG....................................18
7. PLAYING THE DRUM PADS ....................................19
8. PLAYING THE PRESET PATTERNS ..........................21
9. PLAYING THE PRESET SONGS ..............................26
MODES & FUNCTIONS ........................................30
10. PATTERN MODE ..................................................30
11. SONG MODE ......................................................41
12. DRUM KIT MODE ................................................54
13. EXTERNAL IN MODE ..........................................61
14. SYSTEM MODE ..................................................67
15. TEMPO MODE ....................................................73
16. MUTE MODE ......................................................74
17. BALANCE MODE ................................................75
18. TRANSPOSE MODE ............................................76
APPENDIX ..........................................................77
19. RECALLING THE FACTORY DEFAULT SETTINGS ....77
20. DISPLAY MESSAGES ..........................................78
21. TROUBLESHOOTING............................................79
22. SPECIFICATIONS ................................................81
23. INDEX ................................................................82
24. LISTS & CHARTS ................................................84
1
BEFORE YOU BEGIN
GETTING STARTEDMODES & FUNCTIONSAPPENDIX
PDF02_E.qx 6/2/99 5:47 PM Page 1
1. THE RY9
The RY9 is an easy-to-use yet powerful rhythm programmer with automatic
bass and chord accompaniment backing, an external input for playing along
using a guitar, versatile MIDI capabilities and much more.
Featuring Yamaha’s exclusive AWM (Advanced Wave Memory) tone generation
technology—where voices are high quality digital samples of actual
instruments—the RY9 has a large capacity waveform ROM filled with 128
“drum” voices for the rhythms, and 50 “normal” voices for the backings, plus
200 Preset rhythm patterns with matching accompaniment backing
encompassing many different popular music styles, and 50 Preset songs and
12 Preset drum kits suitable for any type of music situation. The RY9 also
features powerful programming capabilities that let you do the following:
Create Your Own Rhythm Patterns
Record your own one-measure User patterns in step-time or real-time. You can
assign any of the preprogrammed backing accompaniments—consisting of
Bass, Chord 1 and Chord 2 tracks—to your rhythm.
Create Your Own Songs
String together a series of Preset and User patterns to create your own User
song—complete with chord progressions as you specify.
Create Your Own Drum Kits
Assign drum voice sounds to the pads to create your own User drum kits—
complete with drum voice pan positioning, pitch tuning and more.
2
BEFORE YOU BEGIN
PDF02_E.qx 6/2/99 5:47 PM Page 2
The RY9’s many other features include song chaining and loop repeating,
rhythm “swing” function for a realistic human feeling, guitar tuner and guitar
synthesizer, 28-note polyphony, stereo outputs, headphone jack, and a large
LCD screen which always lets you know what mode and status you’re currently
in. Hence, the RY9 is the ideal music tool that’s useful in practically any music
situation. You can use it as:
A Practicing Companion
Plug a guitar directly into the RY9 and play along with the patterns and songs.
Mute one or more of the accompaniment tracks, or turn the backing off
entirely and play along with the rhythm only. The RY9 provides just the music
you need for a hot practice session.
A Music Sketch Pad
String together a series of Preset and User rhythm patterns, designate a
backing accompaniment, and specify the chord progressions for a song idea.
Creating your own songs is quick and easy with the RY9’s user-friendly
interface.
A Powerful Drum Machine
Program professional sounding rhythm patterns by Step or Realtime recording,
complete with accent dynamics and “swing” factor for a realistic human feel.
Whether you modify a preset or create your own rhythm pattern from scratch,
the RY9’s auto-quantizing makes sure your rhythms are always on the beat.
A Guitar Synthesizer
Plug a guitar directly into the RY9 and “trigger” AWM normal voices (including
acoustic piano, strings, brass, synth pad sounds and more) in real-time with
the notes you play on the guitar. You can specify the RY9 to “synthesize” any
of the 50 normal voices as single notes, octaves, harmonies and more—in
order to create interesting and unique sound textures.
A MIDI Tone Generator
Connect an external MIDI keyboard or sequencer in order to play the RY9’s
AWM drum voices. You can specify the note table by which the different voices
will be sounded.
3
BEFORE YOU BEGIN
PDF02_E.qx 6/2/99 5:47 PM Page 3
BEFORE YOU BEGIN
2. RY9 SYSTEM STRUCTURE
The RY9 is primarily a powerful rhythm programmer, but with the added
dimension of automatic backing accompaniment, song programming capability
and a guitar synthesizer.
The key components that make up the RY9’s operating system are the AWM
voices, the drum kits, the patterns, and the songs. The main operating modes
are Pattern Mode and Song Mode, each of which are made up of several
“functions”. Additional modes include Drum Kit Mode, External In Mode,
System Mode, Tempo Mode, Mute Mode, Balance Mode and Transpose Mode.
External In
50 Preset Songs (00~49) 50 User Songs (50~99)
Chord Track
200 Preset Patterns (001~199) 50 User Patterns (200~249)
Preset Pattern A~D
Backing : Chord 1
Chord 2
Bass
User Pattern
12 Preset Drum Kits (00~11) 4 User Drum Kit (12~15)
Drum Bank Percussion Bank
12 Pads (00~11) 12 Pads (12~23)
Drum Bank Percussion Bank
12 Pads (00~11) 12 Pads (12~23)
Backing : Chord 1
Chord 2
Bass
128 Drum Voices
Preset Song User Song
Pattern Track
Chord Track
Pattern Track
Rhythm Rhythm
50 Normal Voices
4
PDF02_E.qx 6/2/99 5:47 PM Page 4
BEFORE YOU BEGIN
5
THE AWM VOICES.
There are 128 “drum” voices and 50 “normal” AWM voices. The drum voices
are assigned to the drum kits. The normal voices are assigned to the backing
accompaniments and to the guitar synthesizer.
THE DRUM KITS.
There are 12 Preset drum kits and 4 User drum kits. Although there are only
12 pads on the top panel of the RY9, each drum kit is made up of 24 drum
voices, organized in two “Pad Banks”—a “Drum Pad Bank” and a “Percussion
Pad Bank”—with 12 drum voices assigned to each Pad Bank. (You can switch
freely back and forth between Pad Banks by pressing the [PAD BANK] button.)
The various Preset drum kits are designed for different styles of music. You
can create your own User drum kits by assigning any drum voice you want to
the pads, and specifying output and accent levels, as well as pan positioning
and pitch tuning, for each pad.
THE PATTERNS.
There are 200 Preset patterns and 50 User patterns, each comprised of a one-
measure rhythm pattern. The Preset patterns are organized in 50 music styles
with “A”, “B”, “C” and “D” Sections for each style—representing both “main”
and “fill-in” type Sections.
The Preset rhythm patterns also have special Bass, Chord 1 and Chord 2
backing accompaniment tracks—matched to the music style of each respective
pattern—assigned to them. Each backing track can be turned off, or “muted”,
at will, and you can adjust the volume balance of each. If you want, you can
switch the backing off entirely.
You can create your own User rhythm patterns, and assign one of the backing
accompaniments to it.
THE SONGS.
There are 50 Preset songs and 50 User songs. The Preset songs are made up
of the Preset patterns, complete with preprogrammed chord progressions, and
are intended as music style ideas to get you started or to play along with as
they are.
You can create your own songs using Preset and/or User patterns, complete
with chord progressions that you can record in the “chord track”.
PDF02_E.qx 6/2/99 5:47 PM Page 5
BEFORE YOU BEGIN
6
THE MODES AND FUNCTIONS.
The RY9’s features are for the most part organized into nine modes accessible
by holding [MODE] and pressing one of the drum pads (the names of the
modes are printed on the various pads).
All modes except Tempo Mode and Transpose Mode contain several pages of
functions which you can select by holding [MODE] and pressing [PAGE-] and
[PAGE+].
Most routine operations can be performed from either within Pattern Mode or
Song Mode.
To enter Pattern Mode, hold [MODE] and press [PATTERN].
To enter Song Mode, hold [MODE] and press [SONG].
TOM1
BD1 BD2 SD1 SD2 CRASH
TOM2 TOM3 CLOSED1
CLOSED2
HH
OPEN
HH
HH
RIDE
ACCENT MODE
PATTERN
PAGE PAGE MUTE BALANCE TRANS-
POSE
SONG KIT EXT IN SYSTEM TEMPO
DELETE
AUDITION
CHORD
PAD BANK
ENTER
2 3 4 510
8 9 10 1176
TOM1
BD1 BD2 SD1 SD2 CRASH
TOM2 TOM3 CLOSED1
CLOSED2
HH
OPEN
HH
HH
RIDE
ACCENT MODE
PATTERN
PAGE PAGE MUTE BALANCE TRANS-
POSE
SONG KIT EXT IN SYSTEM TEMPO
DELETE
AUDITION
CHORD
PAD BANK
ENTER
2 3 4 510
8 9 10 1176
PDF02_E.qx 6/2/99 5:47 PM Page 6
BEFORE YOU BEGIN
3. TOP PANEL
1 LCD SCREEN
High contrast, easy-to-read Liquid Crystal Display (LCD) provides large-content
visual feedback to always let you know exactly what mode and status you’re
currently in.
2 [REC] BUTTON
For entering and exiting Pattern Record Mode and Song Record Mode. Both
Step and Realtime recording are possible.
3 [TOP] BUTTON
For returning the song or pattern location to the top, or the first measure,
when the playback is stopped.
4 [BWD] BUTTON
For rewinding the song through a series of measures when the song playback
is stopped. Pressing [BWD] in Pattern Play Mode returns the pattern measure
location to the top, or the first measure. Pressing [BWD] in Pattern Record
Mode lets you select the clock position.
TOM1
BD1 BD2 SD1 SD2 CRASH
TOM2 TOM3 CLOSED1
CLOSED2
HH
OPEN
HH
HH
RIDE
RHYTHM PROGRAMMER
REC
ACCENT MODE
PATTERN
PAGE PAGE MUTE BALANCE TRANS-
POSE
SONG KIT EXT IN SYSTEM TEMPO
DELETE
AUDITION
CHORD
PAD BANK
TOP BWD STOP PLAY FWD
ENTER
2 3 4 510
8 9 10 1176
1
3 4
NEXT
EMPTY
PTN
SONG
PAD
SONG
BEAT
PART
CLOCK
MEAS
KIT
REPEAT
CHAIN
MUTE
2
7
PDF02_E.qx 6/2/99 5:47 PM Page 7
BEFORE YOU BEGIN
5 [STOP] BUTTON
For stopping the song or pattern playback or realtime recording.
6 [PLAY] BUTTON
For starting song or pattern playback or realtime recording from the current
measure location. Pressing [PLAY] immediately after pressing [STOP] will
continue the song or pattern playback from the stop location. To start the song
or pattern from the beginning, or the top, press [TOP] before pressing [PLAY].
7 [FWD] BUTTON
For fast-forwarding the song through a series of measures when the song
playback is stopped. Pressing [FWD] in Pattern Play Mode returns the pattern
measure location to the top, or the first measure. Pressing [FWD] in Pattern
Record Mode lets you select the clock position.
8 [ACCENT] BUTTON
For adding an accent to a drum beat, by pressing and holding [ACCENT] while
hitting a drum pad. In Pattern Step Record Mode, you can record an accent by
simply pressing [ACCENT] at the desired drum beat clock location. You can assign
the accent level for each drum pad of a User drum kit in Drum Kit Mode.
9 [MODE] BUTTON
For accessing the various modes, by pressing and holding down [MODE] while
pressing a mode button, and for accessing the various functions within each
mode, by holding down [MODE] while pressing [PAGE-] and [PAGE+].
TOM1
BD1 BD2 SD1 SD2 CRASH
TOM2 TOM3 CLOSED1
CLOSED2
HH
OPEN
HH
HH
RIDE
RHYTHM PROGRAMMER
REC
ACCENT MODE
PATTERN
PAGE PAGE MUTE BALANCE TRANS-
POSE
SONG KIT EXT IN SYSTEM TEMPO
DELETE
AUDITION
CHORD
PAD BANK
TOP BWD STOP PLAY FWD
ENTER
2 3 4 510
8 9 10 1176
NEXT
EMPTY
PTN
SONG
PAD
SONG
BEAT
PART
CLOCK
MEAS
KIT
REPEAT
CHAIN
MUTE
$
5 6
8 9
!)
#@
%
^
&
7
8
PDF02_E.qx 6/2/99 5:47 PM Page 8
) [DELETE] BUTTON
For deleting individual drum beats in Pattern Record Mode. Simply hold
[DELETE] and press [ENTER] or the appropriate drum pad to delete the drum
voice at the current cursor location. When Chord Assign is active, holding
[DELETE] and pressing [ENTER] will delete the chord at the current cursor
location.
! [AUDITION] BUTTON
For “auditioning”, or checking, drum sounds in Pattern Step Record Mode
before you record a drum beat. While pressing and holding [AUDITION], press
the drum pad you want to audition and the drum voice will sound but data will
not be input.
@ [CHORD] BUTTON
For accessing Chord Assign, which lets you specify the chord root and chord
type for the backing.
# [PAD BANK] BUTTON
Although there are only 12 drum pads on the top panel, each drum kit has 24
sounds, organized in two Pad Banks of 12 voices per bank. Pressing [PAD
BANK] toggles between each bank of 12 “Drum” and 12 “Percussion” voices.
$ DRUM PADS/MODE BUTTONS
Double-function controls which act as drum pads for playing the drum voices
during playback or recording, and act as mode and function select buttons
when the [MODE] button is pressed and held. The names of the various modes
are printed on the pads. The [PAGE+] and [PAGE-] buttons let you access the
various functions within each mode. Although the drum pads are not touch
sensitive, you can apply accents to drum beats using the [ACCENT] button.
% [ENTER] BUTTON
For “confirming” or executing certain data entry operations.
^ [-1] AND [+1] BUTTONS
For specifying data, or modifying the currently selected parameters.
& [E] AND [F] BUTTONS
For moving the “flashing cursor” around the LCD screen to select the various
parameters.
9
BEFORE YOU BEGIN
PDF02_E.qx 6/2/99 5:47 PM Page 9
4. SIDE & REAR PANELS
1 [VOLUME] SLIDER
For setting the master volume output level from the [OUTPUT] and [PHONES]
jacks.
2 [PHONES] MINI JACK
For plugging in a pair of headphones with a mini stereo plug for private
listening.
3 [OUTPUT] JACKS
For connecting the RY9 to a mixer, or a stereo amplifier, or amplified speakers.
In the case of mono output, use the [L/MONO] jack.
4 [MIDI] JACKS
For connecting the RY9 to other MIDI devices such as a synthesizer or music
sequencer, or to a MIDI data storage device (or another RY9) for bulk dumping
of User song, pattern and kit data.
OUTPUT
MIDI
R
OUT IN
EXT IN DC IN
ON STANDBY
L
/
MONO
3 4 5 6 7
8
MIN VOLUME MAX PHONES
1 2
10
BEFORE YOU BEGIN
PDF02_E.qx 6/2/99 5:47 PM Page 10
5 [EXT IN] JACK
For plugging in a guitar to play along with the song or pattern playback, or for
using the guitar tuner feature, or for “triggering” any of the 50 AWM backing
instrument voices in various ways.
6 [DC IN] JACK (DC IN 12V)
For connecting an appropriate AC power adaptor (PA-3B or an equivalent
recommended by Yamaha) to supply power to the RY9.
7 [ON/STANDBY] SWITCH
This switch is for turning the power of the RY9 on and off (page 17).
Even when the switch is in the “STANDBY” position, electricity is still flowing to the instrument at a
minimum level. When not using the RY9 for an extended period of time, be sure to unplug the AC
power adaptor from the wall AC outlet.
8 BATTERY COMPARTMENT
For inserting six 1.5 volt AA-size (SUM-3 or R6P) batteries to supply power to
the RY9. Be sure to remove the batteries when the RY9 is not to be used for
an extended period of time.
11
BEFORE YOU BEGIN
PDF02_E.qx 6/2/99 5:47 PM Page 11
GETTING STARTED
12
5. SETUP & POWER-ON
The RY9 can be powered by either an optional AC adaptor or six batteries.
Follow the instructions below based on the power source you intend to use.
USING A POWER ADAPTOR.
Plug the DC output cable from an optional Yamaha PA-3B AC Adaptor (available
from your Yamaha dealer) snugly into the [DC IN] jack on the rear panel, then
plug the adaptor into a convenient wall AC power outlet.
Do not attempt to use an AC adaptor other than the Yamaha PA-3B or an equivalent recommended
by Yamaha. The use of an incompatible adaptor may cause irreparable damage to the RY9, and
may even pose a serious shock hazard! ALWAYS UNPLUG THE AC ADAPTOR FROM THE AC POWER
OUTLET WHEN THE RY9 IS NOT IN USE.
When the AC adaptor plug is inserted into the RY9’s [DC IN] jack, the batteries are automatically
disconnected.
Regarding the User memory, as long as fresh batteries are inserted in (or an AC power adaptor is
connected to) the RY9, the User pattern, song and drum kit data will be retained, even when the
power is turned off. It will also be retained long enough to exchange an old set of batteries for a
new set. If you have important data in the RY9 which you don’t want to lose, please take care to
keep fresh batteries inserted in (or keep an AC power adaptor connected to) the RY9, and to
regularly save it to an external MIDI data storage device.
ON STANDBY
EXT IN DC IN
AC power outlet
02_GetStartE.qx 7/16/99 11:22 AM Page 12
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104

Yamaha RY9 Uživatelský manuál

Kategorie
Hudební nástroje
Typ
Uživatelský manuál