Yamaha CRX-E300 Návod k obsluze

Kategorie
CD přehrávače
Typ
Návod k obsluze

Tato příručka je také vhodná pro

CRX-E300
OWNER’S MANUAL
MODE D’EMPLOI
UCA
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
Printed in Malaysia V921980
CD Receiver
Ampli-Tuner CD
0101CRXE300(UCA).H1-H4.E 02.5.23, 5:16 PM1
I CAUTION
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert
you to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert you to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
1 Read Instructions – All the safety and operating instructions
should be read before the product is operated.
2 Retain Instructions – The safety and operating instructions
should be retained for future reference.
3 Heed Warnings – All warnings on the product and in the
operating instructions should be adhered to.
4 Follow Instructions – All operating and use instructions
should be followed.
5 Cleaning – Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
6 Attachments – Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
7 Water and Moisture – Do not use this product near water –
for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool;
and the like.
8 Accessories – Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall,
causing serious injury to a child or adult, and serious
damage to the product. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or sold
with the product. Any mounting of the product should
follow the manufacturer’s instructions, and should use a
mounting accessory recommended by the manufacturer.
9 A product and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
product and cart combination to overturn.
10 Ventilation – Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the
product and to protect it from overheating, and these
openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product should not
be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer’s
instructions have been adhered to.
11 Power Sources – This product should be operated only from
the type of power source indicated on the marking label. If
you are not sure of the type of power supply to your home,
consult your product dealer or local power company. For
products intended to operate from battery power, or other
sources, refer to the operating instructions.
12 Grounding or Polarization – This product may be equipped
with a polarized alternating current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
13 Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the
point where they exit from the product.
14 Lightning – For added protection for this product during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line
surges.
15 Power Lines – An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be
fatal.
16 Overloading – Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
17 Object and Liquid Entry – Never push objects of any kind
into this product through openings as they may touch
dangerous voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any kind on
the product.
18 Servicing – Do not attempt to service this product yourself
as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
19 Damage Requiring Service – Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into
the product,
c) If the product has been exposed to rain or water,
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
SAFETY INSTRUCTIONS
0102CRXE300(UCA).Cau.E 02.5.23, 5:09 PM2
CAUTION II
1. IMPORTANT NOTICE : DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved
by Yamaha may void your authority, granted by the
FCC, to use the product.
2. IMPORTANT : When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation
instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3. NOTE : This product has been tested and found to
comply with the requirements listed in FCC
Regulations, Part 15 for Class “B” digital devices.
Compliance with these requirements provides a
reasonable level of assurance that your use of this
product in a residential environment will not result in
harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and,
if not installed and used according to the instructions
found in the users manual, may cause interference
harmful to the operation of other electronic devices.
Compliance with FCC regulations does not guarantee
that interference will not occur in all installations. If
this product is found to be the source of interference,
which can be determined by turning the unit “OFF” and
“ON”, please try to eliminate the problem by using one
of the following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon
lead, change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Electronics
Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
EXAMPLE OF ANTENNA GROUNDING
MAST
GROUND
CLAMP
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 81020)
GROUNDING CONDUCTORS
(NEC SECTION 81021)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
ELECTRIC
SERVICE
EQUIPMENT
NEC
NATIONAL ELECTRICAL CODE
FCC INFORMATION (for US customers)
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as
practical.
d) If the product does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to its normal
operation,
e) If the product has been dropped or damaged in any
way, and
f) When the product exhibits a distinct change in
performance - this indicates a need for service.
20 Replacement Parts – When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other
hazards.
21 Safety Check – Upon completion of any service or repairs
to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.
22 Wall or Ceiling Mounting – The unit should be mounted to
a wall or ceiling only as recommended by the manufacturer.
23 Heat – The product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
24 Outdoor Antenna Grounding – If an outside antenna or
cable system is connected to the product, be sure the
antenna or cable system is grounded so as to provide some
protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
SAFETY INSTRUCTIONS
0102CRXE300(UCA).Cau.E 02.5.23, 5:09 PM3
1 To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
2 Install this unit in a well ventilated, cool, dry, clean
place away from direct sunlight, heat sources, vibration,
dust, moisture or cold. In a cabinet, allow about 10 cm
(4 in.) of free space all around this unit for adequate
ventilation.
3 Locate this unit away from other electrical appliances,
motors, or transformers to avoid humming sounds.
4 Do not expose this unit to sudden temperature changes
from cold to hot, nor locate this unit in an environment
with high humidity (i.e., a room with a humidifier) to
prevent condensation inside this unit, which may cause
an electrical shock, fire, damage to this unit, and/or
personal injury.
5 Avoid installing this unit in a location where foreign
objects may fall onto this unit or where this unit may be
exposed to liquid dripping or splashing. On the top of
this unit, do not place:
Other components, as they may cause damage and/or
discoloration on the surface of this unit.
Burning objects (i.e., candles), as they may cause fire,
damage to this unit, and/or personal injury.
Containers with liquid in them, as they may fall, spilling
the liquid and causing an electrical shock to the user
and/or damage to this unit.
6 Do not cover this unit with a newspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation. If the
temperature inside this unit rises, it may cause fire,
damage to this unit, and/or personal injury.
7 Do not plug in this unit to a wall outlet until all
connections are complete.
8 Do not operate this unit upside-down. It may overheat,
possibly causing damage.
9 Do not use excessive force on switches, knobs and/or
cords.
10 When disconnecting the power cord from the wall
outlet, grasp the plug; do not pull the cord.
11 Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
12 Use only the voltage specified on this unit. Using this
unit with a higher voltage than specified is dangerous
and may cause fire, damage to this unit, and/or personal
injury. YAMAHA will not be held responsible for any
damage resulting from use of this unit with a voltage
other than as specified.
13 To prevent damage by lightning, disconnect the power
cord from the wall outlet during an electrical storm.
14 Do not attempt to modify or fix this unit. Contact
qualified YAMAHA service personnel when any service
is needed. The cabinet should never be opened for any
reason.
CAUTION: READ THIS BEFORE OPERATING THIS UNIT
15 When not planning to use this unit for long periods of
time (i.e., vacation), disconnect the AC power plug from
the wall outlet.
16 Be sure to read the “Troubleshooting” section on
common operating errors before concluding that this
unit is faulty.
17 Before moving this unit, press STANDBY/ON to set the
unit in standby mode, then disconnect the AC power
plug from the wall outlet.
18 VOLTAGE SELECTOR (China and General models
only)
The VOLTAGE SELECTOR on the rear panel of this
unit must be set for your local main voltage BEFORE
plugging into the AC main supply. Voltages are 110/120/
220/240 V AC, 50/60 Hz.
To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
The unit is not disconnected from the AC power source
as long as it is connected to the wall outlet, even if this
unit itself is turned off. This state is called the standby
mode. In this state, this unit is designed to consume a
very small quantity of power.
CAUTION FOR CARRYING THE UNIT
Before carrying the unit, first remove the disc from
the unit, press STANDBY/ON to turn the unit off,
then disconnect the AC power plug from the wall
outlet.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug
to wide slot and fully insert.
This Class B digital apparatus complies with
Canadian ICES-003.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
Laser component in this product is capable of
emitting radiation exceeding the limit for Class 1.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of your equipment
by playing it at a safe level. One that lets the sound come through
loud and clear without annoying blaring or distortion – and, most
importantly, without affecting your sensitive hearing.
Since hearing damage from loud sounds is often
undetectable until it is too late, YAMAHA and the
Electronic Industries Association’s Consumer
Electronics Group recommend you to avoid
prolonged exposure from excessive volume levels.
III CAUTION
IMPORTANT
Please record the serial number of this unit in the space
below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.
0102CRXE300(UCA).Cau.E 02.5.23, 5:09 PM4
1
English
FEATURES
<Receiver>
Minimum RMS output power per channel
25 W + 25 W
(6, 1 kHz, 0.1% THD)
Full operation system remote control
40-station FM/AM preset tuning
SUBWOOFER output terminal
<CD player>
S-bit DAC and 8fs digital filter
Optical digital output
Random, repeat, and program play
CD TEXT display
Copy time control
CD-RW compatible
The CD receiver CRX-E300 is the main unit of the YAMAHA Piano Craft Series. You can upgrade the system by adding
the cassette deck (KX-E300) and MD recorder (MDX-E300)*.
* The cassette deck (KX-E300) and MD recorder (MDX-E300) may not be available for some areas.
SUPPLIED ACCESSORIES ....................... 2
CD PREVENTIVE CARE .......................... 2
NAMES OF BUTTONS AND CONTROLS
Front panel ............................................................ 3
Display ..................................................................3
Remote control ..................................................... 4
GETTING STARTED
Remote control ..................................................... 5
Connecting the speakers and antennas .................6
Connecting other components .............................. 7
Setting the clock ...................................................8
Adjusting the brightness of the display ................8
LISTENING TO A SOURCE ...................... 9
TUNING ............................................... 10
Presetting stations ............................................... 11
CD OPERATIONS
Playing a disc...................................................... 12
Selecting the time display and CD TEXT ..........13
Random-sequence play....................................... 13
Repeat play ......................................................... 14
Program play ...................................................... 14
USING THE BUILT-IN TIMER
Before using the timer ........................................ 16
Timer play and recording ................................... 16
Sleep timer .......................................................... 17
SYSTEM CONTROL
Controlling other components with the remote
control ................................................................. 18
Before recording ................................................. 19
Dubbing setting .................................................. 19
CD synchronized recording ................................ 19
Copy time control ............................................... 20
ADDITIONAL INFORMATION
Troubleshooting .................................................. 21
Specifications...................................................... 23
CONTENTS
0103CRXE300(UCA).01-07.E 02.5.23, 5:09 PM1
2
SUPPLIED ACCESSORIES
Remote control
AM loop antenna
Indoor FM antenna
Batteries (AA, R6, UM-3)
POWER
1 2 3
123
4 5 6
456
7 8 9
78
0 +10 +100
REP
RANDOM
PROG
ABC
TEXT
/
TIME
R. TIME
DE
TAPE
DIRECTION
PRESET
TUNER
PRESET
MD CD TAPE
AUX
MD
REC
/
PAUS E
TAPE
REC
/
PAUS E
MODE
SLEEP
DISPLAY
DUBBING
VOLUME
START
After unpacking, check that the following parts are contained.
CD PREVENTIVE CARE
No!
Compact discs are not affected by small particles of
dust or fingerprints on their playing surface, but even so
they should be kept clean. Wipe by using a clean, dry
cloth. Do not wipe with a circular motion; wipe straight
outward from the center.
Do not try to clean the discs surface by using any type
of disc cleaner, record spray, antistatic spray or liquid,
or any other chemical-based liquid, because such
substances might irreparably damage the discs surface.
Do not expose discs to direct sunlight, high temperature
or high humidity for a long period of time, because
these might warp or otherwise damage the disc.
This compact disc player is designed for use with
following types of disc only. Never attempt to load any
other type of disc into the unit. The unit will also play
8-cm (3-inch) compact discs.
Be sure to use only CD-R and CD-RW discs made by
reliable manufacturers.
Some discs cannot be played depending on the disc
characteristics or recording conditions (copyright-
protected in a particular way, etc.).
Compact discs are not subjected to wear during play,
but damage to the disc surface when the disc is being
handled can adversely affect the discs play.
Do not use cleaning discs or warped discs. All of these
could damage the unit.
To prevent a malfunction of this unit
Do not use any non standard shaped CD (heart, etc.)
available on the market, because it may damage the
unit.
Do not use a CD with tape, seals, or paste on it, because
damage to the unit may result.
(U.S.A., Canada, China,
Korea and General
models)
(Europe, U.K., and
Australia models)
(Playback only)
0103CRXE300(UCA).01-07.E 02.5.23, 5:09 PM2
3
English
NAMES OF BUTTONS AND CONTROLS
Front panel
1 STANDBY/ON (P.9)
2 TIMER indicator (P.16)
3 DISPLAY (P.8,16)
4 TIME ADJ/MEMORY (P.8,11)
5 TIMER/AUTO/MAN’L (P.10,16)
6 PRESET/BAND (P.10)
7 Display (P.3)
8 PRESET/TUNING / (P.10)
When TUNER is selected as an input
source
$/!// (P.12)
When CD is selected as an input
source
9 VOLUME (P.9)
0 PHONES (P.9)
q Disc tray
w BASS (P.9)
e TREBLE (P.9)
r BALANCE (P.9)
t (Open/Close) (P.12)
y & (Stop) (P.12)
u INPUT (P.9)
i ^ (Play/Pause) (P.12)
BALANCE
INPUT
VOLUME
L
R
TREBLEBASS
PHONES
STANDBY/ON
TIMER DISPLAY MEMORY
NATURAL SOUND CD RECEIVER CRX-E300
AUTO/MAN'L
PRESET/BAND
TIMER HOUR MIN
MIN MAX
PRESET/TUNING
TIMER ADJ
+–+
12 345678 9
0
qw e rtyui
Display
TIMER
SLEEP
STEREO AUTO F PROG A B
RANDOM
SREP
MEMORY
TUNED CD-TEXTTITLEARTIST TRACK
PRESET
1
8
90 q w e
234 567
1 Multi information display
2 PRESET indicator (P.11)
3 STEREO indicator (P.10)
4 AUTO indicator (P.10)
5 REP S/F (repeat single/full) indicator
(P.14)
6 PROG (program) indicator (P.14)
7 RANDOM indicator (P.13)
8 A B Tape side indicator (P.20)
9 TIMER indicator (P.16)
0 SLEEP indicator (P.17)
q MEMORY indicator (P.11)
w TUNED indicator (P.10)
e CD Text indicators (P.13)
0103CRXE300(UCA).01-07.E 02.5.23, 5:09 PM3
4
Remote control
1 POWER (P.9)
2 Preset numbers (18)
*
(P.11)
3 A/B/C/D/E
*
(P.11)
4 PRESET /
*
(P.11)
5 TUNER (P.11)
6 MD (MDX-E300) (P.18)
7 TAPE (KX-E300) (P.18)
8 CD (P.12)
9 AUX (The equipment connected to the AUX
terminal)
0 SLEEP (P.17)
q DISPLAY (P.16)
w VOLUME + (P.9)
* When TUNER is selected as an input source
Note
59 are input selectors for each component.
When CD is selected as an input source
1 POWER (P.12)
2 Numeric buttons (P.12)
+100 button is used when operating
MDX-E300.
3 REP (Repeat) (P.14)
4 PROG (Program) (P.14)
5 RANDOM (Random) (P.13)
6 TEXT/TIME (P.13)
7 ^ (Play/Pause) (P.12)
8 $ ! (Skip/Seach backward) (P.12)
9 (Skip/Seach forward) (P.12)
0 & (Stop) (P.12)
q CD input (P.12)
NAMES OF BUTTONS AND CONTROLS
POWER
1 2 3
123
4 5 6
456
7 8 9
78
0 +10 +100
REP
RANDOM
PROG
ABC
TEXT
/
TIME
R. TIME
DE
TAPE
DIRECTION
PRESET
TUNER
PRESET
MD CD TAPE
AUX
MD
REC
/
PAUSE
TAPE
REC
/
PAUSE
MODE
SLEEP
DISPLAY
DUBBING
VOLUME
START
1,1
2,2
5
7
8,q
9
q
w
3
4
6
0
43
6
5
7
98
0
0103CRXE300(UCA).01-07.E 02.5.23, 5:09 PM4
5
English
Remote control
This remote control controls a whole system: not only
CRX-E300 but also a cassette deck (KX-E300) and MD
recorder (MDX-E300) that enhance your system.
Battery installation
1 Remove the battery compartment cover.
2 Insert batteries into the battery compartment.
3 Replace the battery compartment cover.
Battery replacement
If you find that the remote control must be used closer to
the main unit than usual, the batteries are weak. Replace
batteries with new ones.
Notes
Use only AA, R6, UM-3 batteries for replacement.
Be sure the polarities are correct. (See the illustration inside
the battery compartment.)
Remove the batteries if the remote control will not be used for
an extended period of time.
If batteries leak, dispose of them immediately. Avoid touching
the leaked material or letting it come in contact with clothing,
etc. Clean the battery compartment thoroughly before
installing new batteries.
Remote control operation range
Notes
There should be no large obstacles between the remote control
and the main unit.
If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp, etc.),
it might cause the remote control not to work correctly. In this
case, reposition the main unit to avoid direct lighting.
Removing the protection sheet
The remote control is shipped with a protection sheet to
prevent the surface from being scratched during
transportation.
When removing the sheet, first put adhesive tape on an
edge of the remote control so that the tape sticks to the
sheet. Then peel the sheet off with the tape.
Note
Do not scratch the remote control surface when peeling the
sheet off.
GETTING STARTED
2
1
3
P
O
W
E
R
1
1
2
2
3
3
4
4
7
7
8
8
9
5
5
6
6
P
O
W
E
R
1
1
2
2
3
3
4
4
7
7
8
8
9
5
5
6
6
BALANCE
INPUT
VOLUME
L
R
TREBLEBASS
PHONES
STANDBY/ON
TIMER DISPLAY MEMORY
NATURAL SOUND CD RECEIVER CRX-E300
AUTO/MAN'L
PRESET/BAND
TIMER HOUR MIN
MIN MAX
PRESET/TUNING
TIMER ADJ
+ +
30°
30°
Remote control
sensor
Within approximately
6 m (20 feet)
0103CRXE300(UCA).01-07.E 02.5.23, 5:09 PM5
6
Connecting the speakers and antennas
Never plug the AC power cord to the wall outlet until all connections are
completed.
Follow the steps as shown below to connect the system using the supplied cords and accessories. Be sure all connections are
made correctly, that is to say L (left) to L, R (right) to R, + to + and “–” to “–”.
1 Connect the Speakers.
1 Unscrew the knob.
2 Remove approx. 10 mm (4) of insulation from
each of the speaker wires and insert the bare wire
into the terminal.
3 Tighten the knob to secure the wire.
2 Connect the AM Antenna.
Set up the AM loop antenna, then connect it.
3 Connect the FM Antenna.
4 Connect the AC power cord to a wall outlet.
Notes
Use external FM/AM antennas if you need better reception.
Consult your dealer.
The AM loop antenna should be placed apart from the main
unit. The antenna may be hung on a wall.
To connect the subwoofer (optional)
You can reinforce the bass frequencies by adding a
subwoofer (optional).
Connect the SUBWOOFER OUT terminal of the unit to
the INPUT terminal of the subwoofer.
1
3 FM antenna
2 AM loop antenna
Right speaker Left speaker
GETTING STARTED
Red: positive(+)
Black: negative()
GND AM ANT
1
2
3
4 To wall outlet
MD
TAPE
IN
OUT
IN
IN
OUT
AUX
D
A
B
L
R
C
SYSTEM CONNECTOR
OUT
SUBWOOFER
OUT
DIGITAL
OPTICAL
SPEAKERS
RL
6
MIN. /SPEAKER
CLASS 2 WIRING
FM ANT
GND AM ANT
75
UNBAL.
FM ANT
75 UNBAL
(U.S.A. model)
0103CRXE300(UCA).01-07.E 02.5.23, 5:09 PM6
7
English
OUT
A
L
IN
B
R
SYSTEM
CONNECTOR
OUT
FM ANT
GND AM ANT
SPEAKERS
RL
75
UNBAL.
6
MIN. /SPEAKER
CLASS 2 WIRING
SYSTEM CONNECTOR
SUBWOOFER
DIGITAL
OUT
OPTICAL
IN
TAPE
OUT
IN
IN
OUT
AUX
D
A
B
L
R
C
MD
ANALOG DIGITAL
OPTICAL
IN
L
D
OUT
1
IN
2
R
C
SYSTEM
CONNECTOR
<MDX-E300>
<KX-E300>
<CRX-E300>
Connecting other components
To enhance your system, you can connect other components. Refer to the instructions of each component.
Connecting KX-E300 and MDX-E300
GETTING STARTED
1 Connect Å to Å, and ı to ı (for connecting KX-E300), Ç to Ç and Î to Î (for connecting MDX-E300) using
audio pin cable.
2 Connect the DIGITAL OPTICAL OUT jack of CRX-E300 to the DIGITAL OPTICAL IN jack of MDX-E300.
Take off the covers of the optical cable plug, the DIGITAL OPTICAL OUT jack, and the DIGITAL OPTICAL IN
jack before making digital connections. Be sure to replace the jacks cover when the jack on the rear panel is not being
used, in order to protect from dust.
3 Connect an external component to the AUX jack of CRX-E300.
4 Connect CRX-E300 to MDX-E300 and MDX-E300 to KX-E300 with the system control cables.
The connection using the SYSTEM CONNECTOR jack allows you to control this unit as well as the connected
components of YAMAHA Piano Craft series.
If your system does not include MDX-E300, connect CRX-E300 and KX-E300 directly.
5 AC OUTLET
Connect the AC power plug of MDX-E300 to the AC outlet of CRX-E300. Then connect the plug of KX-E300 to the
AC outlet of MDX-E300.
If your system does not include MDX-E300, connect the plug of KX-E300 to the AC outlet of CRX-E300.
Caution
Never turn CRX-E300 on until all connections between components have been completed.
Never connect or disconnect the system control cable and/or power cord while the system components are turned on.
2
5
3
4
Optical cable (EIA standard)
(commercially available)
To wall
outlet
Audio pin cables
System
control cable
(supplied with
KX-E300)
System control cable
(supplied with
MDX-E300)
1
As this terminal is used for an
examination in the factory, do not
connect any equipment to this terminal.
0103CRXE300(UCA).01-07.E 02.5.23, 5:09 PM7
8
Setting the clock
You must set the clock before you use the timer functions.
The clock is based on a 12-hour system for U.S. and
Canada models, and 24-hour system for Australia model.
1 Turn on the power by pressing STANDBY/ON on
the front panel, or POWER on the remote control.
2 While the power is on, press DISPLAY to display
the time.
3 While holding TIME ADJ, press HOUR to set the
hour.
If you want to move the time in the reverse
direction, press HOUR while holding TIME ADJ
and PRESET/BAND.
4 While holding TIME ADJ, press MIN to set the
minutes.
If you want to move the time in the reverse
direction, press MIN while holding TIME ADJ
and PRESET/BAND.
To display the clock
Press DISPLAY.
The current time appears for about 8 seconds, then the
normal display returns. Some buttons and controls may
not work while the current time is displayed.
Note
In the event of a power failure or when the AC power cord is
disconnected for more than five minutes, you must reset the
clock.
Adjusting the brightness
of the display
You can adjust the brightness of the display. If you have
connected cassette deck (KX-E300) and/or MD recorder
(MDX-E300) to this unit, the brightness of the displays is
automatically adjusted to that of this unit.
Press and hold DISPLAY for about two seconds so that
Dimmer ±0 appears on the display. While holding
DISPLAY, turn INPUT clockwise to increase or
counterclockwise to decrease brightness.
Control Range: ±0 to 6 (Preset value: ±0)
INPUT
DISPLAY
BALANCE
INPUT
VOLUME
L
R
TREBLEBASS
PHONES
STANDBY/ON
TIMER DISPLAY MEMORY
NATURAL SOUND CD RECEIVER CRX-E300
AUTO/MAN'L
PRESET/BAND
TIMER HOUR MIN
MIN MAX
PRESET/TUNING
TIMER ADJ
+ +
HOUR
DISPLAY
PRESET/BANDTIME ADJ
MIN
BALANCE
INPUT
VOLUME
L
R
TREBLEBASS
PHONES
STANDBY/ON
TIMER DISPLAY MEMORY
NATURAL SOUND CD RECEIVER CRX-E300
AUTO/MAN'L
PRESET/BAND
TIMER HOUR MIN
MIN MAX
PRESET/TUNING
TIMER ADJ
+ +
GETTING STARTED
STANDBY/ON
0104CRXE300(UCA).08-09.E 02.5.23, 5:09 PM8
English
9
LISTENING TO A SOURCE
1 Set the volume to MIN by turning VOLUME.
2 Turn on the power by pressing STANDBY/ON on
the front panel, or POWER on the remote control.
Piano Craft series components that have correct
system connections made to CRX-E300 can be
controlled to turn to the on or standby mode by
CRX-E300. However, once the connected
components are turned to the standby mode with
their respective STANDBY/ON button, they
cannot be controlled by CRX-E300 STANDBY/
ON button.
3 Select the desired input source by turning INPUT so
that the source appears on the display.
When you operate the component connected to the
AUX terminal, turn INPUT to select AUX.
4 Play the source. (Refer to the owners manual
supplied with each selected component.)
5 Adjust the volume level by turning VOLUME on the
front panel or pressing VOLUME + on the remote
control.
6 If desired, adjust BASS, TREBLE, and BALANCE.
BASS: Turn this control clockwise to increase (or
counterclockwise to decrease) the low frequency
response.
TREBLE: Turn this control clockwise to increase (or
counterclockwise to decrease) the high frequency
response.
BALANCE: Adjust the balance of the output volume
from the left and right speakers to compensate for
sound imbalance caused by the speaker location or
listening room conditions.
When you use headphones
Connect the headphones to the PHONES jack. You can
listen to the sound to be output from the main speakers
through the headphones.
When you have finished using this
unit
Press STANDBY/ON on the front panel again or
POWER on the remote control to set this unit to the
standby mode.
STANDBY appears for a moment on the display.
Auto standby function
This unit will be put automatically into the standby mode
under the following conditions:
A component connected with a system control cable is
selected as an input source.
The component connected to this unit is in stop mode
and not operated for 30 minutes.
POWER
VOLUME –/+
POWER
1 2 3
123
4 5 6
456
7 8 9
78
0 +10 +100
REP
RANDOM
PROG
ABC
TEXT
/
TIME
R. TIME
DE
TAPE
DIRECTION
PRESET
TUNER
PRESET
MD CD TAPE
AUX
MD
REC
/
PAUSE
TAPE
REC
/
PAUSE
MODE
SLEEP
DISPLAY
DUBBING
VOLUME
START
VOLUMESTANDBY/ON
INPUTBALANCE
TREBLE
BASSPHONES
BALANCE
INPUT
VOLUME
L
R
TREBLEBASS
PHONES
STANDBY/ON
TIMER DISPLAY MEMORY
NATURAL SOUND CD RECEIVER CRX-E300
AUTO/MAN'L
PRESET/BAND
TIMER HOUR MIN
MIN MAX
PRESET/TUNING
TIMER ADJ
+ +
This chapter explains the basic operations common to
tuning, playing CD and other connected components.
0104CRXE300(UCA).08-09.E 02.5.23, 5:09 PM9
10
TUNING
Automatic tuning
1 Select TUNER by turning INPUT so that the
frequency of a radio station appears in the display.
2 Press PRESET/BAND to select the reception band.
Do not select the preset tuning mode (in which
PRESET appears on the display).
3 Press AUTO/MANL so that AUTO appears in the
display.
4 Press PRESET/TUNING (for a higher
frequency) or
(for a lower frequency).
5 The unit starts searching for a station.
When the unit finds a station, the unit stops searching
and TUNED appears on the display.
6 If the located station is not the one you want, repeat
steps 4 and 5 until a station you want is tuned.
Notes
If automatic tuning search does not find the desired station, try
manual tuning as described next.
When an FM stereo broadcast with sufficient signal strength is
received, STEREO appears on the display and you can listen
to stereo sound.
You can find radio stations automatically and manually.
Manual tuning
1 Follow steps 1 and 2 described in Automatic
tuning.
2 Press AUTO/MANL so that AUTO disappears
from the display.
3 Press PRESET/TUNING (for a higher
frequency) or
(for a lower frequency) to select
your desired station.
Each time you press PRESET/TUNING or
, the frequency changes step by step.
STEREO AUTO
TUNED
PRESET/TUNING /
PRESET/BAND
BALANCE
INPUT
VOLUME
L
R
TREBLEBASS
PHONES
STANDBY/ON
TIMER DISPLAY MEMORY
NATURAL SOUND CD RECEIVER CRX-E300
AUTO/MAN'L
PRESET/BAND
TIMER HOUR MIN
MIN MAX
PRESET/TUNING
TIMER ADJ
+ +
INPUT
AUTO/MANL
0105CRXE300(UCA).10-11.E 02.5.23, 5:09 PM10
11
English
TUNING
English
To preset stations manually
1 Tune in a desired station.
(Refer to the previous page for the tuning procedure.)
2 Press MEMORY.
3 Within about 5 seconds, use PRESET/TUNING /
to select a desired preset number. Continue
pressing PRESET/TUNING
/ to select the
group of the preset stations (A, B, C, D, and E).
4 Press MEMORY.
•“MEMORY, PRESET, and preset number will
appear on the display.
5 Repeat steps 1 to 4 until all desired stations are
preset.
Presetting stations
The unit can preset station frequencies selected by
Automatic tuning or Manual tuning. Up to 40 stations can
be stored. With this function, you can select any desired
station by pressing the corresponding preset station
number.
Notes
A new setting can be preset in place of a previous one.
The preset stations are retained for a week after you disconnect
the AC power cord or a power failure occurs.
To preset stations automatically
1 Select TUNER as input source by turning INPUT.
2 Press MEMORY for about 2 seconds.
The unit starts presetting stations, AUTO and
MEMORY will flash on the display.
Received stations are stored to A1, A2...A8 sequentially.
After 40 stations or all FM and AM stations are stored, the
display will show the preset station A1.
To recall a preset station
Press TUNER and select the desired number by pressing
PRESET/BAND and PRESET/TUNING
/ on the
front panel or PRESET
/ , A/B/C/D/E and 18 on
the remote control. Press and hold PRESET/TUNING
/ (or PRESET / on the remote control) to
switch the preset group (AE).
INPUTPRESET/BANDMEMORY
18
A/B/C/D/E
TUNER
PRESET /
BALANCE
INPUT
VOLUME
L
R
TREBLEBASS
PHONES
STANDBY/ON
TIMER DISPLAY MEMORY
NATURAL SOUND CD RECEIVER CRX-E300
AUTO/MAN'L
PRESET/BAND
TIMER HOUR MIN
MIN MAX
PRESET/TUNING
TIMER ADJ
+ +
PRESET/TUNING /
POWER
1 2 3
123
4 5 6
456
7 8 9
78
0 +10 +100
REP
RANDOM
PROG
ABC
TEXT
/
TIME
R. TIME
DE
TAPE
DIRECTION
PRESET
TUNER
PRESET
MD CD TAPE
AUX
MD
REC
/
PAUSE
TAPE
REC
/
PAUSE
MODE
SLEEP
DISPLAY
DUBBING
VOLUME
START
STEREO
MEMORY
TUNED
PRESET
STEREO
MEMORY
TUNED
PRESET
The arrow will appear for a second when
it is preset.
0105CRXE300(UCA).10-11.E 02.5.23, 5:09 PM11
12
1 Press STANDBY/ON to turn on this unit.
2 Press CD on the remote control or turn to CD using
the input knob.
Playing a disc
3 Press to open the disc tray, and place a CD on the
tray.
4 Press ^ to start play.
This unit starts play.
To pause play
Press ^.
To resume play, press ^ again.
To stop play
Press &.
To eject the CD
Press to open the disc tray, and remove the CD from
the tray.
To play a specific track on the disc
(Skip)
Direct play
Select a desired track using the numeric button.
(Example: To select 35, press +10 three times so that
3 _ appears in the display, then press 5.)
Skip play
Press / to skip forward or $/! to skip
backward. Press once for each track to be skipped.
Notes
You cannot enter a number that is higher than the last track
number on the disc.
These operations can also be performed when the unit is in the
pause or stop mode.
During stop mode, if / or $/! is pressed, the
track number successively changes to higher numbers (or
lower numbers).
To advance or reverse playback
rapidly (Search)
Press and hold / to advance playback rapidly, and
$/! to reverse playback rapidly.
Note
This unit cannot play a CD-R or CD-RW disc unless the disc is
finalized. Please make sure to finalize the disc on the CD
recorder before playing on this unit.
^
&
^&
/$/!
$ !/
STANDBY/ON
POWER
CD
Numeric
buttons
BALANCE
INPUT
VOLUME
L
R
TREBLEBASS
PHONES
STANDBY/ON
TIMER DISPLAY MEMORY
NATURAL SOUND CD RECEIVER CRX-E300
AUTO/MAN'L
PRESET/BAND
TIMER HOUR MIN
MIN MAX
PRESET/TUNING
TIMER ADJ
+ +
POWER
1 2 3
123
4 5 6
456
7 8 9
78
0 +10 +100
REP
RANDOM
PROG
ABC
TEXT
/
TIME
R. TIME
DE
TAPE
DIRECTION
PRESET
TUNER
PRESET
MD CD TAPE
AUX
MD
REC
/
PAU SE
TAPE
REC
/
PAUSE
MODE
SLEEP
DISPLAY
DUBBING
VOLUME
START
CD OPERATIONS
0106CRXE300(UCA).12-15.E 02.5.23, 5:09 PM12
13
English
Each time you press TEXT/TIME, the display changes as
follows:
Note
The disc title, artist names, or track names may not be
displayed with some CD TEXT discs. In this case, (NO
ENTRY) appears on the display for about two seconds and
then go back to the time display.
Press RANDOM.
•“RANDOM indicator lights up on the display.
The unit starts random sequence play.
To cancel random-sequence play
mode
Press & or RANDOM.
•“RANDOM disappears from the display.
Notes
This feature will not function during programming, or during
programmed play.
If / is pressed during random-sequence play, the next
randomly programmed track will be played.
If $/! is pressed, play will return to the beginning of the
current track.
Total remaining time on the disc will not be displayed during
random-sequence play.
Random-sequence play
The unit can play all the tracks in a random sequence.
RANDOM
Selecting the time
display and CD TEXT
You can select any of four time displays by pressing
TEXT/TIME. When you play a CD with CD TEXT, the
disc title, artist name, and track name are also displayed.
POWER
1 2 3
123
4 5 6
456
7 8 9
78
0 +10 +100
REP
RANDOM
PROG
ABC
TEXT
/
TIME
R. TIME
DE
TEXT/TIME
POWER
1 2 3
123
4 5 6
456
7 8 9
78
0 +10 +100
REP
RANDOM
PROG
ABC
TEXT
/
TIME
R. TIME
DE
Elapsed time of the
current track
•“CD-TEXT appears on the display if
a CD has CD TEXT.
Total remaining time of
the disc
Total disc play time
Remaining time of the
current track
Disc title
Artist name
Track name
The current track number
CD OPERATIONS
0106CRXE300(UCA).12-15.E 02.5.23, 5:09 PM13
14
SINGLE REPEAT
The current track is played repeatedly.
FULL REPEAT
The current disc is played repeatedly.
In random-sequence play mode, all randomly
sequenced tracks are played repeatedly in each-time-
different order.
To cancel repeat play mode
Press REP successively until REP S and REP F
disappear from the display.
1 Press & to stop the unit.
2 Press PROG.
3 Use the numeric buttons to select a track number
until the desired track number appears on the display.
4 Repeat step 3 to program more tracks. You can select
the same track again.
5 Press ^ to start program play.
Program play
By creating a program, you can enjoy listening to your
favourite tracks in any desired order. As many as 20
tracks can be programmed in sequence.
PROG
Repeat play
You can play any desired track or disc repeatedly.
Press REP to select the repeat mode.
REP
Numeric
buttons
$ !/
^
&
POWER
1 2 3
123
4 5 6
456
7 8 9
78
0 +10 +100
REP
RANDOM
PROG
ABC
TEXT
/
TIME
R. TIME
DE
POWER
1 2 3
123
4 5 6
456
7 8 9
78
0 +10 +100
REP
RANDOM
PROG
ABC
TEXT
/
TIME
R. TIME
DE
TAPE
DIRECTION
PRESET
TUNER
PRESET
MD CD TAPE
AUX
MD
REC
/
PAU SE
TAPE
REC
/
PAUSE
MODE
SLEEP
DISPLAY
DUBBING
VOLUME
START
PROG
SREP
FREP
CD OPERATIONS
0106CRXE300(UCA).12-15.E 02.5.23, 5:09 PM14
15
English
To stop program play mode
Press &.
Note
/ or $/! can be used during program play to skip
to tracks within the program.
To check program data
1. Press & to stop program play.
2. Press PROG. Then each time you press / /
$/!, the track number and the program number
are displayed in the order of the program.
To change program data
1. Follow the preceding procedure described in To
check program data.
2. Display the track number to be changed by pressing
/ /
$/!.
3. Press the numeric button of the desired track. The
previously programmed track will be cleared from
memory and the new one will be programmed.
To delete all program data
When program play is stopped, press &.
Note
Turning the unit to the standby mode or opening the disc tray
also deletes the program data.
CD OPERATIONS
0106CRXE300(UCA).12-15.E 02.5.23, 5:09 PM15
16
Timer play and recording
By using the built-in timer, you can have the unit turn on
at a specified time and begin playing or recording
automatically. You can also specify the turn off time.
3. Timer REC
Select the recording component by turning
INPUT. If you want to use timer play with
TUNER or AUX, select REC Mode OFF.
4. ON Time
ON Time appears on the display for a second,
and changed to the time setting mode.
Press HOUR to set the hour.
Press MIN to set the minute.
5. OFF Time
Set the time the same way as above.
If you set the ON time but not OFF time, the timer
play or recording will finish automatically after an
hour.
Notes
The display mode will change in about 8 seconds. If the
mode is changed before the setting is completed, call the
mode again by pressing DISPLAY once or more.
If you select the input other than TUNER and AUX on
2. Timer Input, 3. Timer REC is skipped.
2 Press TIMER to complete the timer setting.
If you press TIMER during ON Time or OFF
Time mode, the system is put in the standby
mode and the TIMER indicator lights up. To
continue using the system, press STANDBY/ON
to turn on this unit.
To cancel the timer play setting
Press DISPLAY to show the current time, then press
TIMER so that TIMER goes off from the display. You
can also cancel by pressing TIMER in standby mode.
Note
In the event of a power failure or when the AC power cord is
disconnected for more than five minutes, you must reset the
clock.
1 Press DISPLAY.
Whenever DISPLAY is pressed, the display mode
changes as follows:
1. Clock Time (TIMER on/off mode)
If you have not set the clock yet Set Clock
appears. You need to set the current time as
described on page 8.
2. Timer Input
Select the source to be played by turning INPUT.
Timer recording is possible only when you
select TUNER or AUX.
MIN
INPUT
DISPLAY HOUR
TIMER
Before using the timer
If you want to use the cassette deck, KX-E300 or the MD
Recorder, MDX-E300 for timer play or recording, you
must first make the connections as shown in Connecting
other components on page 7. For details, refer to the
instructions supplied with the MDX-E300 or KX-E300.
(Example)
BALANCE
INPUT
VOLUME
L
R
TREBLEBASS
PHONES
STANDBY/ON
TIMER DISPLAY MEMORY
NATURAL SOUND CD RECEIVER CRX-E300
AUTO/MAN'L
PRESET/BAND
TIMER HOUR MIN
MIN MAX
PRESET/TUNING
TIMER ADJ
+ +
USING THE BUILT-IN TIMER
0107CRXE300(UCA).16-17.E 02.5.23, 5:10 PM16
1 / 1

Yamaha CRX-E300 Návod k obsluze

Kategorie
CD přehrávače
Typ
Návod k obsluze
Tato příručka je také vhodná pro