Yamaha NP-V80 Návod k obsluze

Setting UpReferenceAppendix Quick Guide

EN

Owner’s Manual

2

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply (adapter).

DO NOT connect this product to any power supply or adapter other

than one described in the manual, on the name plate, or specifically

recommended by Yamaha.

WARNING:

Do not place this product in a position where anyone could

walk on, trip over, or roll anything over power or connecting cords of any

kind. The use of an extension cord is not recommended! If you must use an

extension cord, the minimum wire size for a 25’ cord (or less) is 18 AWG.

NOTE: The smaller the AWG number, the larger the current handling

capacity. For longer extension cords, consult a local electrician.

This product should be used only with the components supplied or; a

cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is

used, please observe all safety markings and instructions that accom-

pany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be correct at

the time of printing. However, Yamaha reserves the right to change or

modify any of the specifications without notice or obligation to update

existing units.

This product, either alone or in combination with an amplifier and

headphones or speaker/s, may be capable of producing sound levels

that could cause permanent hearing loss. DO NOT operate for long

periods of time at a high volume level or at a level that is uncomfort-

able. If you experience any hearing loss or ringing in the ears, you

should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time period before

damage occurs.

Some Yamaha products may have benches and / or accessory

mounting fixtures that are either supplied with the product or as

optional accessories. Some of these items are designed to be dealer

assembled or installed. Please make sure that benches are stable and

any optional fixtures (where applicable) are well secured BEFORE

using.

Benches supplied by Yamaha are designed for seating only. No other

uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating to how a

function or effect works (when the unit is operating as designed) are

not covered by the manufacturer’s warranty, and are therefore the

owners responsibility. Please study this manual carefully and consult

your dealer before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and envi-

ronmentally friendly. We sincerely believe that our products and the

production methods used to produce them, meet these goals. In keep-

ing with both the letter and the spirit of the law, we want you to be

aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery which (if

applicable) is soldered in place. The average life span of this type of bat-

tery is approximately five years. When replacement becomes necessary,

contact a qualified service representative to perform the replacement.

This product may also use “household” type batteries. Some of these

may be rechargeable. Make sure that the battery being charged is a

rechargeable type and that the charger is intended for the battery being

charged.

When installing batteries, never mix old batteries with new ones, and

never mix different types of batteries. Batteries MUST be installed cor-

rectly. Mismatches or incorrect installation may result in overheating and

battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep all bat-

teries away from children. Dispose of used batteries promptly and as

regulated by the laws in your area. Note: Check with any retailer of

household type batteries in your area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for some rea-

son its useful life is considered to be at an end, please observe all

local, state, and federal regulations that relate to the disposal of prod-

ucts that contain lead, batteries, plastics, etc. If your dealer is unable

to assist you, please contact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The model

number, serial number, power requirements, etc., are located on this

plate. You should record the model number, serial number, and the

date of purchase in the spaces provided below and retain this manual

as a permanent record of your purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

92-BP (bottom)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions con-

tained in this manual, meets FCC requirements. Modifications not

expressly approved by Yamaha may void your authority, granted by

the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/

or another product use only high quality shielded cables. Cable/s

supplied with this product MUST be used. Follow all installation

instructions. Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the

requirements listed in FCC Regulations, Part 15 for Class “B” digital

devices. Compliance with these requirements provides a reason-

able level of assurance that your use of this product in a residential

environment will not result in harmful interference with other elec-

tronic devices. This equipment generates/uses radio frequencies

and, if not installed and used according to the instructions found in

the users manual, may cause interference harmful to the operation

of other electronic devices. Compliance with FCC regulations does

not guarantee that interference will not occur in all installations. If

this product is found to be the source of interference, which can be

determined by turning the unit “OFF” and “ON”, please try to elimi-

nate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by

the interference.

Utilize power outlets that are on different branch (circuit breaker or

fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead, change the

lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory results,

please contact the local retailer authorized to distribute this type of

product. If you can not locate the appropriate retailer, please con-

tact Yamaha Corporation of America, Electronic Service Division,

6600 Orangethorpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products distributed by

Yamaha Corporation of America or its subsidiaries.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

FCC INFORMATION (U.S.A.)

Owner’s Manual

3

Information for Users on Collection and Disposal of Old Equipment and used Batteries

These symbols on the products, packaging, and/or accompanying documents mean that used electrical and elec-

tronic products and batteries should not be mixed with general household waste.

For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable col-

lection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any

potential negative effects on human health and the environment which could otherwise arise from inappropriate

waste handling.

For more information about collection and recycling of old products and batteries, please contact your local munici-

pality, your waste disposal service or the point of sale where you purchased the items.

[For business users in the European Union]

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further informa-

tion.

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these items, please contact your local

authorities or dealer and ask for the correct method of disposal.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set

by the Directive for the chemical involved.

(weee_battery_eu_en)

OBSERVERA!

Apparaten kopplas inte ur växelströmskällan (nätet) så länge

som den ar ansluten till vägguttaget, även om själva apparaten

har stängts av.

ADVARSEL: Netspændingen til dette apparat er IKKE

afbrudt, sålæenge netledningen siddr i en stikkontakt, som er t

endt — også selvom der or slukket på apparatets afbryder.

VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita

koko laitetta verkosta.

(standby)

The serial number of this product may be found on the bottom

of the unit. You should note this serial number in the space

provided below and retain this manual as a permanent record

of your purchase to aid identification in the event of theft.

Model No.

Serial No.

(bottom)

COMPLIANCE INFORMATION STATEMENT

(DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave., Buena Park,

Calif. 90620

Telephone : 714-522-9011

Type of Equipment : Digital Keyboard

Model Name : NP-V80/NP-V60

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including

interference that may cause undesired operation.

See user manual instructions if interference to radio reception is

suspected.

* This applies only to products distributed by

YAMAHA CORPORATION OF AMERICA.

(FCC DoC)

IMPORTANT NOTICE FOR THE UNITED KINGDOM

Connecting the Plug and Cord

IMPORTANT. The wires in this mains lead are coloured in

accordance with the following code:

BLUE : NEUTRAL

BROWN : LIVE

As the colours of the wires in the mains lead of this apparatus

may not correspond with the coloured makings identifying the

terminals in your plug proceed as follows:

The wire which is coloured BLUE must be connected to the ter-

minal which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the

terminal which is marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth terminal

of the three pin plug.

* This applies only to products distributed by

Yamaha Music U.K. Ltd.

(2 wires)

Owner’s Manual

4

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-

circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not place the power cord near heat sources such as heaters or radiators, and

do not excessively bend or otherwise damage the cord, place heavy objects on it,

or place it in a position where anyone could walk on, trip over, or roll anything

over it.

• Only use the voltage specified as correct for the instrument. The required voltage

is printed on the name plate of the instrument.

• Use the specified adaptor (page 97) only. Using the wrong adaptor can result in

damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

• This instrument contains no user-serviceable parts. Do not open the instrument

or attempt to disassemble or modify the internal components in any way. If it

should appear to be malfunctioning, discontinue use immediately and have it

inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, or place containers on it containing liquids which might spill into any

openings. If any liquid such as water seeps into the instrument, turn off the power

immediately and unplug the power cord from the AC outlet. Then have the

instrument inspected by qualified Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit.

A burning item may fall over and cause a fire.

• Always replace all batteries at the same time. Do not use new batteries together

with old ones.

• Do not mix battery types, such as alkaline batteries with manganese batteries, or

batteries from different makers, or different types of batteries from the same

maker, since this can cause overheating, fire, or battery fluid leakage.

• Do not tamper with or disassemble batteries.

• Do not dispose of batteries in fire.

• Do not attempt to recharge batteries that are not intended to be charged.

• Keep batteries away from children.

• If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid

should come in contact with your eyes, mouth, or skin, wash immediately with

water and consult a doctor. Battery fluid is corrosive and may possibly cause loss

of sight or chemical burns.

• Always make sure all batteries are inserted in conformity with the +/- polarity

markings. Failure to do so might result in overheating, fire, or battery fluid

leakage.

• When the batteries run out, or if the instrument is not to be used for a long time,

remove the batteries from the instrument to prevent possible leakage of the battery

fluid.

• When one of the following problems occur, immediately turn off the power switch

and disconnect the electric plug from the outlet. (If you are using batteries,

remove all batteries from the instrument.) Then have the device inspected by

Yamaha service personnel.

• The power cord or plug becomes frayed or damaged.

• It emits unusual smells or smoke.

• Some object has been dropped into the instrument.

• There is a sudden loss of sound during use of the instrument.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the

instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a multiple-connector.

Doing so can result in lower sound quality, or possibly cause overheating in the

outlet.

• When removing the electric plug from the instrument or an outlet, always hold the

plug itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the instrument is not to be used for

extended periods of time, or during electrical storms.

• Do not place the instrument in an unstable position where it might accidentally

fall over.

• Before moving the instrument, remove all connected cables.

• When setting up the product, make sure that the AC outlet you are using is easily

accessible. If some trouble or malfunction occurs, immediately turn off the power

switch and disconnect the plug from the outlet. Even when the power switch is

turned off, electricity is still flowing to the product at the minimum level. When

you are not using the product for a long time, make sure to unplug the power cord

from the wall AC outlet.

• Use only the stand specified for the instrument. When attaching the stand or rack,

use the provided screws only. Failure to do so could cause damage to the internal

components or result in the instrument falling over.

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all components,

set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum levels and

gradually raise the volume controls while playing the instrument to set the desired

listening level.

• Do not insert a finger or hand in any gaps on the instrument.

• Never insert or drop paper, metallic, or other objects into the gaps on the panel or

keyboard.

• Do not rest your weight on, or place heavy objects on the instrument, and do not

use excessive force on the buttons, switches or connectors.

• Do not use the instrument/device or headphones for a long period of time at a

high or uncomfortable volume level, since this can cause permanent hearing loss.

If you experience any hearing loss or ringing in the ears, consult a physician.

Power supply/AC power adaptor

Do not open

Water warning

Fire warning

Battery

If you notice any abnormality

Power supply/AC power adaptor

Location

Connections

Handling caution

(7)-1 1/2

Owner’s Manual

5

Always turn the power off when the instrument is not in use.

Even when the [ ](Standby/On) switch is standby (the LCD backlight is off), electricity is still flowing to the instrument at the minimum level. When you are not using the

instrument for a long time, make sure you unplug the power cord from the wall AC outlet.

Make sure to discard used batteries according to local regulations.

NOTICE

To avoid the possibility of damage to the product, data or other property, follow the notices below.

 Handling and Maintenance

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio

may generate noise.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day)

to prevent the possibility of panel disfiguration or damage to the internal components.

• Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.

 Saving data

• Some data items (page 50) are automatically saved as backup data in the internal memory even if you turn the power off. Saved data may be lost due to

malfunction or incorrect operation. Save important data to a USB storage device (NP-V80 only)/or other external device such as a computer (page 88).

(NP-V80 only) To protect against data loss through media damage, we recommend that you save your important data onto two USB storage devices/or other external device

such as a computer.

 About copyrights

• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal

use.

• This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use

others’ copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and

sound recordings. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of

copyright has legal consequences. DON’T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.

 About functions/data bundled with the instrument

• Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.

 About this manual

• The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your

instrument.

• Windows is a registered trademark of Microsoft

®

Corporation in the United States and other countries.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

(7)-1 2/2

Owner’s Manual

6

Logos

GM System Level 1

“GM System Level 1” is an addition to the MIDI standard which ensures that any GM-compatible

music data can be accurately played by any GM-compatible tone generator, regardless of manufacturer.

The GM mark is affixed to all software and hardware products that support GM System Level.

XGlite

As its name implies, “XGlite” is a simplified version of Yamaha’s high-quality XG tone generation for-

mat. Naturally, you can play back any XG song data using an XGlite tone generator. However, keep in

mind that some songs may play back differently compared to the original data, due to the reduced set of

control parameters and effects.

USB

USB is an abbreviation for Universal Serial Bus. It is a serial interface for connecting a computer with

peripheral Devices. It allows “hot swapping” (connecting peripheral devices while the power to the

computer is on).

STYLE FILE

The Style File Format is Yamaha’s original style file format which uses a unique conversion system to

provide high-quality automatic accompaniment based on a wide range of chord types.

Owner’s Manual

7

About this Owner’s Manual and Data List

This manual consists of four main sections: “Setting Up,” “Quick Guide,” “Reference,” and “Appendix.”

Also, a separate “Data List” is provided.

Owner’s Manual (this book)

Data List

Voice List, MIDI Data Format, etc.

MIDI Reference

The MIDI Reference section contains MIDI related information. The MIDI Reference is available for

downloading from the Yamaha Manual Library at: http://www.yamaha.co.jp/manual/

Included Accessories

The package includes the following items. Please check that you have them all.

• AC Power Adaptor

* May not be included depending on your particular area.

Please check with your Yamaha dealer.

• Owner’s Manual

• Music rest

• Accessory CD-ROM

• Footswitch (NP-V80 only)

• Data List

• My Yamaha Product User Registration

* The PRODUCT ID on the sheet will be needed when

you fill out the User Registration form.

Setting Up

• • • • • • • • •

Please read this section first.

This section explains how to use the basic functions. Refer to this

section while playing the instrument.

Quick Guide

• • • • • • • • •

Reference

• • • • • • • • •

This section explains how to make detailed settings for the instru-

ment’s various functions.

Appendix

• • • • • • • • •

This section includes troubleshooting information and specifica-

tions.

Insert the music

rest into the slots

as shown.

Music Rest

Owner’s Manual

8

Special Features

Graded Soft Touch keyboard

Just as on an actual piano, the lower keys are heavy in touch and the higher keys

are light, with soft touch of digital keyboard for beginners.

Play a Variety of Instrument Voices

Page 16

The instrument voice that sounds when you play the keyboard can be changed to

violin, flute, harp, or any of an extensive range of voices. You can change the

mood of a song written for piano, for example, by using violin to play it instead.

Experience a whole new world of musical variety.

Play Along with Styles

Page 23

Want to play with full accompaniment? Try the auto-accompaniment Styles.

The accompaniment styles provide the equivalent of a full backing band cover-

ing a wide variety of styles from waltzes to 8-beat to euro-trance ... and much

more. Select a style that matches the music you want to play, or experiment with

new styles to expand your musical horizons.

Using Songs

Page 26

You can simply enjoy listening to the 30 internal songs, or use them with just

about any of the many functions provided—the performance assistant technol-

ogy feature, lessons, and more.

Arpeggio Function (NP-V80 only)

Page 20

Similar to the arpeggio functions provided on some synthesizers, this function

automatically produces arpeggios (broken chords) when you simply play the

appropriate notes on the keyboard. A variety of arpeggios can be produced by

changing your fingering or the arpeggio type.

042

EuTrance

Owner’s Manual

9

Quick GuideReferenceAppendix Setting Up

Contents

About this Owner’s Manual and Data List ........................7

Included Accessories .......................................................7

Special Features ..............................................................8

Setting Up

Setting Up 10

Power Requirements......................................................10

Connecting Headphones (PHONES/OUTPUT Jack).....11

Connecting a Footswitch or a Foot Pedal

(SUSTAIN Jack).............................................................11

Turning the Power On ....................................................11

Panel Controls and Terminals 12

Basic Operation and Displays 14

Quick Guide

Try Playing a Variety of Instrument Voices 16

Select and Play a Voice—MAIN.....................................16

Play the Grand Piano Voice ...........................................17

Play Two Voices Simultaneously—DUAL ......................18

Play Different Voices with the Left and Right Hands

—SPLIT..........................................................................18

Using the Metronome.....................................................19

Creating Arpeggios (NP-V80 only) 20

Use the Arpeggio Function.............................................20

Changing the Arpeggio type...........................................21

Playing Styles 22

Select a Style Rhythm....................................................22

Play Along with a Style...................................................23

Playing Songs 26

Select and Listen to a Song ...........................................26

Select and Play Songs on a USB Flash Memory

(NP-V80 only).................................................................28

Play Songs in Sequence ................................................29

Song Fast Forward, Fast Reverse, and Pause ..............29

Reference

Select a Song For a Lesson 30

The Easy Way to Play Piano 34

Play Using the Music Database 40

Change a Song’s Style 41

Record Your Own Performance 43

Memorize Your Favorite Panel Settings 48

Backup and Initialization 50

Backup ...........................................................................50

Initialization ....................................................................50

Handy Performance Features 51

Adding Reverb ...............................................................51

Adding Chorus ...............................................................51

Panel Sustain .................................................................52

Pitch Controls (Transpose).............................................52

Pitch Controls (Tuning) ..................................................53

Setting the Metronome Time Signature..........................53

Adjusting the Metronome Volume..................................54

Pitch Bend......................................................................54

One Touch Setting .........................................................54

Select an EQ Setting for the Best Sound.......................55

Auto Power Off Setup ....................................................55

Voice Settings 56

Voice Editing ..................................................................56

Selecting a Dual Voice...................................................57

Selecting a Split Voice ...................................................57

Touch Response Sensitivity (NP-V80)...........................58

Touch Response Sensitivity (NP-V60)...........................58

Harmony ........................................................................59

Arpeggio Settings (NP-V80 only) 60

Controlling Arpeggio Volume with Keyboard Dynamics

...60

Synchronizing an arpeggio to a tempo of Style or Song

...60

Holding the arpeggio Playback ......................................61

Style (Auto-accompaniment) Functions 62

Pattern Variation (Sections) ...........................................62

Changing the tempo of the Style....................................64

Adjusting the Style Volume ............................................64

Setting the Split Point.....................................................65

Tap Start ........................................................................65

Play a Style with Chords but No Rhythm

(Stop Accompaniment) ..................................................66

Playing Styles Using the Entire Keyboard......................66

Loading Style Files (NP-V60).........................................67

Looking Up Chords Using the Chord Dictionary ............68

Song Settings 69

BGM Playback ...............................................................69

Random Song Playback ................................................69

Changing the tempo of the Song ...................................70

Song Volume .................................................................70

A-B Repeat ....................................................................71

Muting Independent Song Tracks ..................................71

Tap Start ........................................................................72

Change the Melody Voice..............................................72

The Functions 73

Selecting and Setting Functions ....................................73

Saving and Loading Data (NP-V80 Only) 76

File Control Functions ....................................................76

Precautions when using the [USB TO DEVICE]

terminal ..........................................................................77

Using USB Storage Devices ..........................................77

Connecting to a Computer 84

Connecting a Personal Computer..................................84

Transferring Performance Data to and from a Computer

...85

Transferring Data between the Computer and Instrument

...86

Accessory CD-ROM Installation Guide 89

Important Notices about the CD-ROM ...........................89

CD-ROM Contents.........................................................90

System Requirements....................................................91

Software Installation.......................................................91

Appendix

Troubleshooting 96

Specifications 97

Index 98

Owner’s Manual

10

Setting Up

Be sure to do the following operations BEFORE turning on the power.

Power Requirements

Although the instrument will run either from an optional AC adaptor or batteries, Yamaha recommends use of an

AC adaptor whenever possible. An AC adaptor is more environmentally friendly than batteries and does not deplete

resources. USB flash memory save, delete, and format operations can only be performed on the NP-V80 when the

instrument is being powered from an AC adapter. These operations cannot be performed using battery power.

Using an AC Power Adaptor

1 Connect the AC adaptor to the power supply jack.

2 Plug the AC adaptor into an AC outlet.

Using Batteries

1 Open the battery compartment cover located on the

instrument’s bottom panel.

2 Insert the six new batteries, being careful to follow

the polarity markings on the inside of the compart-

ment.

3 Replace the compartment cover, making sure that it

locks firmly in place.

For battery operation the instrument requires six 1.5V

“AA” size, LR6 or equivalent batteries. (Alkaline bat-

teries are recommended.) When battery power becomes

too low for proper operation, make sure to replace all

batteries, following the precautions listed below.

If necessary, also make sure to save all important User

data (see pages 50, 88).

• Use the specified adaptor (page 97). The use of other

adaptors may result in irreparable damage to both the

adaptor and the instrument.

• Unplug the AC Power Adaptor when not using the

instrument, or during electrical storms.

• Connecting the AC power adaptor automatically supplies

power from the adaptor and overrides battery power, even

when batteries are installed.

WARNING

CAUTION

AC outlet

AC power

adaptor

2

1

NOTE

• Be sure to install the batteries in the same direction, main-

taining the correct polarity (as shown). Incorrect battery

installation may result in heat, fire and/or leaking of corro-

sive chemicals.

• When the batteries run down, replace them with a com-

plete set of six new batteries. NEVER mix old and new bat-

teries. Do not use different kinds of batteries (e.g. alkaline

and manganese) at the same time.

• If the instrument will not be used for an extended period of

time, remove the batteries to prevent possible fluid leakage.

• The use of alkaline batteries is recommended for this

instrument. Other types of batteries may exhibit a sudden

drop in power when the batteries are low, possibly result-

ing in a loss of flash memory data.

• Please use the power adaptor when transferring data to

flash memory. Batteries (including rechargeable types) can

be drained rapidly by this type of operation. If the batteries

do become drained during a data transfer, both the data

being transferred and the data currently in the transfer des-

tination will be lost.

CAUTION

NOTICE

Setting Up

Owner’s Manual

11

Setting Up

Make all necessary connections below BEFORE turning the power on.

Connecting Headphones

(PHONES/OUTPUT Jack)

Any pair of stereo headphones with a 1/4" stereo

phone plug can be plugged in here for convenient

monitoring. The speakers are automatically shut off

when a plug is inserted into this jack.

The PHONES/OUTPUT jack also functions as an

external output. You can connect the PHONES/OUT-

PUT jack to a keyboard amplifier, stereo system,

mixer, tape recorder, or other line-level audio device

to send the instrument’s output signal to that device.

Connecting a Footswitch or a

Foot Pedal (SUSTAIN Jack)

The SUSTAIN jack is for connecting the footswitch or

foot pedal. The pedal functions in the same way as a

damper pedal on an acoustic piano. Connect an

included footswitch (NP-V80 only) or an optional

footswitch FC4/FC5 to this jack and press the pedal to

sustain the sound. An optional FC3 foot pedal can

also be connected to this jack.

If you connect an optional pedal of FC3, the half

pedal function* can be used.

* half pedal function

While you playing the piano with SUSTAIN and if you need to

delete the cloudy sound, release the foot from pedal to half posi-

tion.

Turning the Power On

The [ ](Standby/On) switch turns the power to the

instrument on or standby. Turn down the volume by

turning the [MASTER VOLUME] control to the left

and press the [ ](Standby/On) switch to turn on the

power. Press the [ ](Standby/On) switch again to

turn the power standby.

While playing the keyboard, adjust the volume level

by using the [MASTER VOLUME] control.

• Avoid listening with the headphones at high volume for

long periods of time; doing so may not only result in ear

fatigue, it may be damaging to your hearing.

• To prevent damage to the speakers, set the volume of the

external devices at the minimum setting before connecting

them. Failure to observe these cautions may result in elec-

tric shock or equipment damage. Also, be sure to set the

volumes of all devices at their minimum levels and gradu-

ally raise the volume controls while playing the instrument

to set the desired listening level.

WARNING

CAUTION

• The sustain function does not affect split voices.

• Make sure that power is OFF when connecting or discon-

necting the pedal.

• Do not press the pedal while turning the power on. Other-

wise, the switch or pedal type (on/off) will be reversed.

• Even when the switch is standby, electricity is still flowing

to the instrument at the minimum level. When you are not

using the instrument for a long time, make sure you

unplug the AC power adaptor from the wall AC outlet, and/

or remove the batteries from the instrument.

NOTE

CAUTION

Owner’s Manual

12

Setting Up

Panel Controls and Terminals

Front Panel

q [ ](Standby/On) switch...................... page 11

w [MASTER VOLUME] control ................ page 11

e [DEMO/BGM] button ............................page 29

r [REC] button.........................................page 43

t [1]–[5], [A] buttons ...............................page 44

LESSON

[RIGHT] button..................................page 30

[LEFT] button ....................................page 30

y LESSON START

[WAITING] button..............................page 30

[YOUR TEMPO] button .....................page 32

[MINUS ONE] button.........................page 33

u [METRONOME ON/OFF] button .. pages 19, 53

i [TEMPO/TAP] button.. pages 19, 64, 65, 70, 72

o [P.A.T. ON/OFF] button ........................page 35

!0 [EASY SONG ARRANGER] button......page 41

!1 SONG

[REPEAT&LEARN] button................ page 33

[A-B REPEAT] button .......................page 71

[REW] button ....................................page 29

[FF] button ........................................page 29

[PAUSE] button ................................. page 29

[START/STOP] button....................... page 27

!2 STYLE

[ACMP ON/OFF] button.................... page 23

[INTRO/ENDING/rit.] button .............page 63

[MAIN/AUTO FILL] button ................page 63

[SYNC STOP] button ........................ page 63

[SYNC START] button....................... page 62

[START/STOP] button....................... page 22

!3 [SONG] button...................................... page 26

!4 [STYLE] button..................................... page 22

!5 [VOICE] button ..................................... page 16

!6 [MUSIC DATABASE] button.................page 40

Li

q

e

r

t y

u

i

o !0

w

!1

!2

@6

Front Panel

Display (page 15)

The panel illustrations shown in this owner’s manual are taken from the NP-V80.

Panel Controls and Terminals

Owner’s Manual

13

Setting Up

!7 [FUNCTION] button..............................page 73

!8 [GRAND PIANO] button.......................page 17

!9 REGIST [MEMORY/BANK],

[1]–[4] buttons ......................................page 48

@0 CATEGORY [] and []

buttons .......................................... pages 14, 73

@1 DATA ENTRY

Dial, Number buttons [0]–[9],

[+] and [-] buttons .............................page 14

@2 [ARPEGGIO ON/OFF] button

(NP-V80 only) .......................................page 20

[TOUCH ON/OFF] button

(NP-V60 only) .......................................page 58

@3 [DUAL ON/OFF] button ................ pages 18, 57

@4 [SPLIT ON/OFF] button................ pages 18, 57

@5 [HARMONY ON/OFF] button ...............page 59

@6 PITCH BEND wheel..............................page 54

@7 USB TO DEVICE terminal

(NP-V80 only) .......................................page 76

Rear Panel

@8 USB TO HOST terminal ....................... page 84

@9 SUSTAIN jack ....................................... page 11

#0 PHONES/OUTPUT jack........................ page 11

#1 DC IN jack............................................. page 10

f

r

iveGPno

@8 @9 #0 #1

!3

!8

!99

!4 !5

!6 !7

@3

@4

@5

@0 @1

@2

@7

Rear Panel

NP-V60

[TOUCH ON/OFF] button

Owner’s Manual

14

Setting Up

Basic Operation and Displays

Basic Operation

Press a button to select a basic function: Voice, Style or Song. To change the instrument voice that sounds when

you play the keyboard, press the [VOICE] button. If you want to play along with auto accompaniment, press the

[STYLE] button. If you want to listen to a song, press the [SONG] button.

LiveGPno

Press briefly

to increase.

3 Start a function or play

the keyboard.

2 Select an item

or value.

1 Select a basic

function.

Rotate the dial clockwise to

increase the value of the

selected item, or counter-

clockwise to decrease it’s

value. Rotate the dial con-

tinuously to continuously

increase or decrease the

value.

Dial

Increase

When selecting a song or

style, you can use these but-

tons to jump to the first item in

the next or previous category.

The CATEGORY [ ] and

[ ] buttons can also be used

to select function items

sequentially after pressing the

[FUNCTION] button.

CATEGORY [ ] and [ ] buttons

f

r

f

r

The number buttons can be

used to directly enter a Song,

Style or Voice number or

parameter value.

For numbers that start with

one or two zeroes, the first

zeroes can be omitted.

Example:

Selecting Voice 003, Grand

Piano.

Number buttons [0]–[9]

Press the [+] button briefly

to increase the value by 1, or

press the [-] button briefly to

decrease the value by 1.

Press and hold either button

to continuously increase or

decrease the value in the cor-

responding direction.

[+], [-] buttons

Decrease

Press briefly

to decrease.

Jump to the

first item in

the next or

Press number but-

tons [0], [0], [3].

The “Press & Hold” Symbol

Buttons having this indication can be used to call up an

alternate function when the relevant button is pressed and held.

Hold down this button until the function calls up.

When SONG is selected via the basic function buttons 1

above, the SONG indicator will light. When STYLE is selected

the STYLE indicator will light. The corresponding labels

above (SONG) or below (STYLE) the buttons then apply.

Basic Operation and Displays

Owner’s Manual

15

Setting Up

Display Items

The display shows all of the current basic settings: song, style, voice.

It also includes a range of indicators that show the on/off status of a range of functions.

001

LiveGPno

Indicates that Touch response is

turned on. (page 58)

Indicates that Harmony is

turned on. (page 59)

Indicates that the Dual voice is

turned on. (page 18)

Indicates that the Split voice is

turned on. (page 18)

Indicates that the Arpeggio is

turned on. (page 20)

Indicates that performance

assistant technology is turned

on. (page 33)

Indicates that Accompaniment

is turned on. (page 23)

Indicates that SYNC STOP is

turned on. (page 63)

TOUCH

HARMONY

DUAL

SPLIT

ARPEGGIO (NP-V80 only)

Performance assistant technology

ACMP ON

SYNC STOP

Displays the melody and

chord notes of a song when

the Song Lesson function is

in use, or the notes of chords

you specify when the Dic-

tionary function is in use. At

other times the notes you

play on the keyboard are dis-

played.

Notation

• Any notes occurring below or above the staff are

indicated by “8va” in the notation.

• For a few specific chords, not all notes may be

shown in the notation section of the display. This

is due to space limitations in the display.

NOTE

Indicates the beat number in a mea-

sure during the Metronome func-

tion. Indicates the current measure during playback

of a song or style, and the currently set Tempo

value for the song or style. (pages 19, 45)

Indicates the name of the chord currently

being played back, or the name of the

chord being played on the keyboard. (page 23)

Information related to the

song tracks is shown here.

(pages 29, 44, 71)

BEAT number and MEASURE

Chord Display

Track Display

001

Indicates the current style or song

beat with flashing arrows. (page 27)

Beat Display

Owner’s Manual

16

Quick Guide

Try Playing a Variety of Instrument Voices

In addition to piano, organ, and other “standard” keyboard instruments, this instru-

ment has a large range of voices that includes guitar, bass, strings, sax, trumpet,

drums and percussion, sound effects … a wide variety of musical sounds.

This procedure selects the main voice you will play on the keyboard.

1

Press the [VOICE] button.

The voice number and name will be displayed.

2

Select the voice you want to play.

While watching the displayed voice name rotate the dial. The avail-

able voices will be selected and displayed in sequence. The voice

selected here becomes the main voice.

For this example select the “102 Flute” voice.

Preset Voice Types (NP-V80)

Preset Voice Types (NP-V60)

Select and Play a Voice—MAIN

001

LiveGPno

Appears when the Voice

mode is engaged.

Voice name

Voice number

• You can also select the voice

using the CATEGORY [ ]

and [ ] buttons after press-

ing the [VOICE] button.

(page 14)

NOTE

f

r

102

Flute

Select 102 Flute

001–127 Instrument Voices

128–139

(Drum Kit)

Various drum and percussion sounds are assigned to

individual keys, via which they can be played. Details

on assigning instruments to keys are provided in the

Drum Kit List of the separate Data List.

001–116 Instrument Voices

117–128

(Drum Kit)

Various drum and percussion sounds are assigned to

individual keys, via which they can be played. Details

on assigning instruments to keys are provided in the

Drum Kit List of the separate Data List.

Quick Guide

Try Playing a Variety of Instrument Voices

Owner’s Manual

17

3

Play the keyboard.

Try selecting and playing a variety of voices.

When you just want to play piano, all you have to do is press one convenient button.

Press the [GRAND PIANO] button.

The Grand Piano voice will be selected.

• Voice Settings (page 56)

NOTE

Play the Grand Piano Voice

• When you press the

[GRAND PIANO] button all

settings other than touch

sensitivity are turned off. The

dual and split voices will

also be turned off, so only

the Grand Piano voice will

play over the entire key-

board.

NOTE

Try Playing a Variety of Instrument Voices

Owner’s Manual

18

Quick Guide

Once you press the [DUAL ON/OFF] button to turn the dual function on, a second voice will sound

that will play in addition to the main voice when you play the keyboard. The second voice is known as

the “dual” voice.

Press the button a second time to turn the dual voice function off. A suitable

dual voice is automatically selected when you turn on this function, but you

can easily select a different dual voice (page 57).

Once you press the [SPLIT ON/OFF] button to turn the split function on, you can play different voices

to the left and right of the keyboard “split point”. The main and dual voices can be played to the right of

the split point, while the voice played to the left of the split point is known as the “split voice”. The

split point setting can be changed as required (page 65).

Press the button a second time to turn the split voice function off. A suitable

split voice is automatically selected when you turn on this function, but you

can easily select a different split voice (page 57).

Play Two Voices Simultaneously—DUAL

102

Flute

Appears when

dual voice is on

Two voices will sound

at the same time.

Play Different Voices with the Left and Right Hands—SPLIT

102

Flute

Split voice

Split point

Main voice and dual voice

Appears when split

voice is on

Quick Guide

Try Playing a Variety of Instrument Voices

Owner’s Manual

19

The instrument features a built-in metronome (a device that keeps an accurate tempo) that is convenient

for practicing.

Press the [METRONOME ON/OFF] button to start the metronome. To stop

the metronome, press the [METRONOME ON/OFF] button again.

If you want to adjust the metronome tempo, press the [TEMPO/TAP] button

to call up the Tempo setting in the display, then you can use the dial to set

the tempo. You can also set the tempo using the number buttons on the front

panel.

You can set the time signature (page 53).

Using the Metronome

001

LiveGPno

4

Indicates the beat number in a

measure during the Metronome

function.

• You can set the time signa-

ture (page 53).

NOTE

090

Tempo

Current Tempo value

Owner’s Manual

20

Quick Guide

Creating Arpeggios (NP-V80 only)

The arpeggio function lets you create arpeggios (broken chords) by simply playing the

required notes on the keyboard. For example, you could play the notes of a triad—the

root, third, and fifth—and the arpeggio function will automatically create a variety of

interesting arpeggio-type phrases. By changing the arpeggio type and the notes you

play it is possible to create a wide range of patterns and phrases that can be used for

music production as well as performance.

1

Press the [ARPEGGIO ON/OFF] button to turn the

arpeggio function on.

The button lights when the Arpeggio function is on.

2

Play a note or notes on the keyboard to trigger

Arpeggio playback.

The sound of the arpeggio produced will change according to the

number of notes you play and the area of the keyboard you play in.

When the split function is on, the arpeggio applies to the split voice.

The arpeggio applies to the main and dual voices when the split func-

tion is off. Arpeggios cannot be played using the split and main/dual

voices simultaneously.

3

When you have finished playing with the arpeggio

function, press the [ARPEGGIO ON/OFF] button to

turn it off.

Use the Arpeggio Function

• When an FC4 or FC5 foot-

switch is connected to the

SUSTAIN jack is pressed,

the Arpeggio will continue to

play after the note is

released (page 61).

NOTE

Stránka se načítá ...

Yamaha NP-V80 Návod k obsluze

Tato příručka je také vhodná pro

Yamaha NP-V80 Návod k obsluze

v jiných jazycích

Související papíry

Jiné dokumenty