Yamaha DVD-S1200 Návod k obsluze

Kategorie
DVD přehrávače
Typ
Návod k obsluze
NATURAL SOUND DVD AUDIO / VIDEO PLAYER DVD-S1200
PROGRESSIVE ON
VIDEO OFF
GROUP
LEVEL
010
PHONES
STANDBY
STANDBY
/ON
AUDIO
/
VIDEO
1
23
4
5
6
7
8
9
0
S
10
CANCEL
OPEN/CLOSE
PO
W
ER
MARKER
TEX
T
P
A
G
E
G
R
O
U
P
ENTER
VIDEO OFF
PLAY MODE
SK
IP
SLOW
/
SEARCH
SUBTITLE
DVD
V739700
A
U
DIO
A
N
G
LE
REPEAT
A
-
B
HP-V.S.S.
SP-V.S.S.
TOP MENU
M
EN
U
ON SCREEN RETURN
PLAY LIST
DIRECT NAVI
S
E
T U
P
Í
/I
AUDIO
/
VIDEO
PLA
Y
P
A
U
S
E
STO
P
AUDIO
/
VIDEO
DVD AUDIO/VIDEO PLAYER
Owners manual
Before connecting, operating or adjusting this product,
please read these instructions completely.
Please keep this manual for future reference.
RQT5938-W
U
Getting started
2
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EX-
POSURE.
DO NOT OPEN COVERS AND DO NOT RE-
PAIR YOURSELF. REFER SERVICING TO
QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE, DO NOT EX-
POSE THIS APPLIANCE TO RAIN, SPLASH-
ING, DRIPPING OR MOISTURE.
CAUTION:
TO PREVENT ELECTRIC SHOCK MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FUL-
LY INSERT.
This Class B digital apparatus complies with
Canadian ICES-003.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of suffi-
cient magnitude to constitute a risk of electric shock
to persons.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the ap-
pliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
(Inside of product)
RQLS0233
-
-
-
-
-
-
-
-
-
-
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
AVOID DIRECT EXPOSURE TO BEAM.
DANGER
(FDA 21 CFR)
(IEC60825-1)
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
AVOID EXPOSURE TO BEAM.
CAUTION
RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS D’OUVERTURE.
EXPOSITION DANGEREUSE AU FAISCEAU.
ATTENTION
SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING.
UNDGÅ UDSÆTTELSE FOR STRÅLING.
ADVARSEL
AVATTAESSA OLET ALTTIINA NÄKYVÄÄ JA NÄKYMÄTÖN
LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
VARO!
SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL
ÄR ÖPPNAD. BETRAKTA EJ STRÅLEN.
VARNING
SYNLIG OG USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES.
UNNGÅ EKSPONERING FOR STRÅLEN.
ADVARSEL
SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG
GEÖFFNET. NICHT DEM STRAHL AUSSETZEN.
VORSICHT
FCC INFORMATION (for US customers only)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This
product, when installed as indicated in the instructions contained
in this manual, meets FCC requirements. Modifications not ex-
pressly approved by Yamaha may void your authority, granted
by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories
and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all in-
stallation instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with
the requirements listed in FCC Regulations, Part 15 for Class “B”
digital devices. Compliance with these requirements provides a
reasonable level of assurance that your use of this product in a
residential environment will not result in harmful interference with
other electronic devices.
This equipment generates/uses radio frequencies and, if not in-
stalled and used according to the instructions found in the users
manual, may cause interference harmful to the operation of other
electronic devices.
Compliance with FCC regulations does not guarantee that inter-
ference will not occur in all installations. If this product is found to
be the source of interference, which can be determined by turn-
ing the unit “OFF” and “ON”, please try to eliminate the problem
by using one of the following measures:
Relocate either this product or the device that is being affected
by the interference.
Utilize power outlets that are on different branch (circuit breaker
or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the an-
tenna. If the antenna lead-in is 300 ohm ribbon lead, change the
lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results,
please contact the local retailer authorized to distribute this type
of product. If you can not locate the appropriate retailer, please
contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe
Ave, Buena Park, CA 90620
The above statements apply ONLY to those products distributed
by Yamaha Corporation of America or its subsidiaries.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s
Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring
or distortionand, most importantly, without affecting your
sensitive hearing. Since hearing damage from
loud sounds is often undetectable until it is too
late, YAMAHA and the Electronic Industries
Association’s Consumer Electronics Group
recommend you to avoid prolonged exposure
from excessive volume levels.
3
Getting started
Getting started
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Disc information . . . . . . . . . . . . . . . . . . . . . . . . . 15
Disc handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
The remote control . . . . . . . . . . . . . . . . . . . . . . . 16
Control reference guide . . . . . . . . . . . . . . . . . . . 17
Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Connecting an AV amplifier with a built-in decoder . . . . . . . . . 09
Connection to digital audio equipment without a decoder . . . . 09
Connecting an AV amplifier with 5.1-channel audio input
terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Analog connection to a 2-channel amplifier or system
component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connections using the S video or component video
terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Recording to MDs or cassette tapes . . . . . . . . . . . . . . . . . . . . 11
Basic operations
Basic play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Resume function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Starting play from a selected program, title, or track . . . . . . . . 13
Skipping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Frame-by-frame viewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Fast forward and rewindSEARCH . . . . . . . . . . . . . . . . . . . . 14
Slow-motion play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Selecting still picturesPage Skip . . . . . . . . . . . . . . . . . . . . . 15
Selecting groups to play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
To enjoy even higher quality soundVIDEO OFF . . . . . . . . . 15
To enjoy even higher quality picturePROGRESSIVE ON . . 15
Advanced operations
Marking places to play againMARKER . . . . . 16
Changing the play sequence . . . . . . . . . . . . . . . 17
All group play/Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Program play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Playing the programs on DVD-RAM . . . . . . . . . . 19
Selecting programs to playDIRECT NAVIGATOR . . . . . . . . 19
Using the play list menu to play specific scenes . . . . . . . . . . . 20
Table of contents
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Repeat play/A-B repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Increasing your enjoyment of movies and
music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Enjoying virtual surround effects with 2 speakers or
headphones (VIRTUAL SURROUND (V.S.S.)) . . . . . . . . . . 22
Using headphones . . . . . . . . . . . . . . . . . . . . . . . 22
Changing soundtracks, subtitle languages
and angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Using On-Screen Menu Icons . . . . . . . . . . . . . . . 24
Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Icons for disc information/Shuttle screen . . . . . . . . . . . . . . . . . 25
Icons for unit information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Changing settings . . . . . . . . . . . . . . . . . . . . . . . . 28
Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Summary of settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Entering a password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Television settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Speaker setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Digital output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Reference
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . 35
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Accessories
Please check and identify the supplied accessories.
¸ AC power supply
cord . . . . . . . . . . . . . . . . . . 1
¸ Remote control . . . . . . . . 1 ¸ Batteries . . . . . . . . . . . . . . 2
for remote control
¸ Audio/Video cable . . . . . . 1
Note
The included AC power supply cord is for use with this unit only.
Be sure to use the included AC power supply cord with this unit.
Getting started
4
Before using this unit please read these operating instructions carefully. Take special care to follow the warnings indicated on the unit itself as
well as the safety suggestions listed below.
Afterwards keep them handy for future reference.
Do not place the unit
on amplifiers or equip-
ment that may become
hot.
The heat can damage the unit.
PRECAUTIONS
Placement
1. VentilationThe unit should be situated so that its location or
position does not interfere with its proper ventilation. Allow
10 cm (4q) clearance from the rear of the unit.
2. Foreign MaterialCare should be taken so that objects do not
fall into and liquids are not spilled into the unit. Do not subject
this unit to excessive smoke, dust, mechanical vibration, or
shock.
3. Carts and StandsThe unit should be used
only with a cart or stand that is recommended by
the manufacturer. The unit and cart combination
should be moved with care. Quick stops, exces-
sive force, and
uneven surfaces may cause the unit and cart combination to
overturn.
4. MountingAny mounting of the appliance should follow the
manufacturers instructions, and should use a mounting acces-
sory recommended by the manufacturer.
Maintenance
Disconnect this unit from the AC outlet before cleaning.
Clean the cabinet, panel and controls with a soft cloth lightly moist-
ened with a mild detergent solution.
Do not use any type of abrasive pad, scouring powder or solvent
such as alcohol or benzine.
The model number and serial number of this product can be
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
MODEL NUMBER! DVD-S1200
SERIAL NUMBER
Safety
1. Power SourceThe unit should be connected to a power
supply only of the type described in the operating instructions or
as marked on the unit. If you are not sure of the type of power
supply to your home, consult your appliance dealer or local pow-
er
company.
2. PolarizationIf the unit is equipped with a polarized AC power
plug (a plug having one blade wider than the other), that plug will
fit into the AC outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of
the polarized plug.
3. Power Cord ProtectionAC power supply cords should be
routed so that they are not likely to be walked on or pinched by
items placed upon or against them. Never take hold of the plug
or cord if your hand is wet, and always grasp the plug body when
connecting or disconnecting it.
4. OverloadingDo not overload wall outlets and extension cords
as this can result in a risk of fire or electric shock.
5. Nonuse PeriodsWhen the unit is not being used, turn the
power off. When left unused for a long time, the unit should be
unplugged from the household AC outlet.
6. AttachmentsDo not use attachments not recommended by
the unit manufacturer as they may cause hazards.
Installation
Environment
1. Water and MoistureDo not use this unit near waterfor
example, near a bathtub, washbowl, swimming pool, or the like.
Damp basements should also be avoided.
2. CondensationMoisture may form on the lens in the following
conditions
³immediately after a heater has been turned on.
³in a steamy or very humid room.
³when the unit is suddenly moved from a cold environment to a
warm one.
If moisture forms inside this unit, it may not operate properly. To
correct this problem, turn on the power and wait about one hour
for the moisture to evaporate.
3. HeatThe unit should be situated away from heat sources such
as radiators and the like. It also should not be placed in tempera-
tures less than 5 oC (41 oF) or greater than 35 oC (95 oF).
5
Getting started
º Discs that can be played
Video
system
NTSC
NTSC
(and PAL,
but audio
only)
NTSC
NTSC
Disc information
LogoDisc type
DVD-RAM
(4.7 GB)
DVD-
Audio
DVD-Video
Video CD
Audio CD
Indication
used in
instructions
[RAM]
[DVD-A]
[DVD-V]
[VCD]
[CD]
Region
number
º Region Management Information
(DVD-Video only)
This unit responds to the Region Management Information recorded
on DVD-Video. This units region number is 1. You cannot play the
disc if the region number on the DVD-Video does not correspond to
the region number on the unit.
You can play discs with labels containing the region number 1 and
ALL. Read the discs instructions carefully.
º Playing DVDs and Video CDs
The producer of the material can control how these discs are
played. This means that you may not be able to control play of a disc
with some operations described in these operating instructions.
Read the discs instructions carefully.
º DVD-RAM discs
DVD-RAM discs must meet the following conditions for this unit to
be able to play them. It may not be possible to play some discs due
to the condition of the recording.
1
ALL
³Structure of the disc (example)
³Starting play from a selected chapter
Press the numeric buttons and press [ENTER].
Example: Chapter 23: [2] [3] [ENTER]
(Pressing [S10] is unnecessary.)
³Repeat play
You can use chapter repeat or title repeat.
³Program play, random play
You cannot use program play or random play.
MP3 playback
You can use this unit to play MP3 format audio recorded for personal use with a computer etc. onto CD-R or CD-RW. Play may not be
possible in some cases due to the condition of the recording. Discs recorded using MP3 differ to CDs in the following ways.
³Display during play
³On-Screen Menu Icons for disc information during play
1 2 3 4 5 6 7 8 9
Title
(Album)
Title
(Album)
PGM
GROUP
TITLE
TRACK
CHAP
PG
D.MIX P.PCM
MLT.CH
HP
SP
V.S.S.
RMTR
DVD
VIDEO
AUDIO
VR
VCD
RNDA B
-
Type
Capacity
Recording format
4.7 GB TYPE 2 disc
Note
³Remove TYPE 2 discs from their cartridges before use. Read the
instructions for the disc carefully.
³Do not allow the disc to become dirty or scratched.
³Store discs in their cartridges. Be sure the label of the disc and the
cartridge both face up when replacing the disc.
For your reference
Some parts of the disc, for example where one program ends and
another begins, may not play smoothly.
Current chapter
Chapter (Track)
1/ 59
C
0 : 01
Note
³Not compatible with multi-session recordings
If you record MP3 onto CD-R/CD-RW over a number of sessions, this unit can play only the recordings made in the first session.
³Recordings will not necessarily be played in the order you recorded them. The recordings will be reordered according to their titles:
numbers in numerical order first, upper case in alphabetical order next, and lower case in alphabetical order last.
³If you play an MP3 track that includes still picture data, it will take some time before the music itself starts playing and the elapsed time
will not be displayed during this time. Even after the track starts, the correct play time will not be displayed.
º Discs that cannot be played
PAL discs (the audio on DVD-Audio can be played), DVD-RAM
(2.6 GB, TYPE 1), DVD-ROM, DVD-R (some DVD-R can be
played), CD-ROM, CDV, CD-G, iRW, DVD-RW, CVD, SVCD,
SACD, Divx Video Discs and Photo CD.
º DVDs that can be played
This unit has a Dolby Digital decoder so you can play
DVDs with this mark.
This unit has a DTS decoder so you can play DVDs
with this mark.
Non-cartridge 4.7 GB
Total number of chapters
Elapsed play time
(display only, cannot be changed)
Non-cartridge discs
Discs that can be removed from their
cartridges (TYPE 2)
12 cm 4.7 GB and 8 cm 2.8 GB
Discs recorded with DVD video
recorders, DVD video cameras,
personal computers, etc., using Version
1.1 of the Video Recording Format (a
unified video recording standard).
Getting started
6
30°30°
The remote control
Batteries
³Insert so the poles (i and j) match those in the remote control.
³Do not use rechargeable type batteries.
Do not;
³mix old and new batteries.
³use different types at the same time.
³heat or expose to flame.
³take apart or short circuit.
³attempt to recharge alkaline or manganese batteries.
³use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
Remove if the remote control is not going to be used for a long peri-
od of time. Store in a cool, dark place.
Replace if the unit does not respond to the remote control even
when held close to the front panel.
Use
Aim at the sensor, avoiding obstacles, at a maximum range of
7 m (23 feet) directly in front of the unit.
³Keep the transmission window and the units sensor free from
dust.
³Operation can be affected by strong light sources, such as direct
sunlight, and the glass doors on cabinets.
Do not;
³put heavy objects on the remote control.
³take the remote control apart.
³spill liquids onto the remote control.
Remote control signal sensor
7 m (23 feet)
Disc handling
Do not use irregularly shaped discs, such as heart-shaped.
(These can damage the unit.)
1
2
R6, AA
º How to hold a disc
Do not touch the recorded surface.
º If the surface is dirty
DVD-Audio, DVD-Video, Video CD, CD
Wipe it with a damp cloth and then wipe dry.
Do not wipe with a circular motion; wipe straight outward from the
center.
DVD-RAM
³Clean DVD-RAM only with the DVD-RAM/PD disc cleaner availa-
ble as an optional accessory.
³Never use cloths or cleaners for CDs, etc.
º Condensation
Moisture may condense on discs after being brought inside from the
cold.
If the disc is a DVD-RAM, use the DVD-RAM/PD disc cleaner avail-
able as an optional accessory to wipe it dry.
With other discs, wipe with a soft, dry, lint-free cloth.
º Handling precautions
³Do not write on the label side with a ball-point pen or other writing
instrument.
³Do not use record cleaning sprays, benzine, thinner, static electric-
ity prevention liquids or any other solvent.
³Do not attach labels or stickers to discs. (Do not use discs with
exposed adhesive from tape or left over peeled-off stickers.)
³Do not use scratch-proof protectors or covers.
³Do not use discs printed with label printers available on the
market.
º Do not place or store discs in the following
places
³Locations exposed to direct sunlight
³Humid or dusty locations
³Locations directly exposed to a heat vent or heating appliance
7
Getting started
1234
5678
90
S
10
CANCEL
OPEN/CLOSE
POWER
MARKER
PAG EGROUP
ENTER
VIDEO OFF
PLAY MODE
SKIP
SLOW
/
SEARCH
SUBTITLE
PLAYPAU SESTOP
DVD
V756260
AUDIO ANGLE
REPEAT
A
-
B
HP-V.S.S. SP-V.S.S.
TOP MENU
MENU
ON SCREEN RETURN
SET UP
Í/I
AUDIO
/
VIDEO
TEXT
PLAY LIST
DIRECT NAVI
NATURAL SOUND DVD AUDIO / VIDEO PLAYER DVD-S1200
PROGRESSIVE ON
VIDEO OFF
GROUP
LEVEL
010
PHONES
STANDBY
STANDBY
/ON
AUDIO
/
VIDEO
PROGRESSIVE ON
VIDEO OFF
GROUP
STANDBY
STANDBY
/ON
AUDIO
/
VIDEO
@
A
B
<
C
D
E
F
G
H
I
J
7
8
9
T
S
R
O
M
N
5
L
K
:
1 3 4 5 6
789:;<
2
>=?@
P
Q
Main unit
Page
1 Standby indicator (STANDBY)
When the unit is connected to the household AC outlet, this indi-
cator lights up in standby mode and goes out when the unit is
turned on.
2 PROGRESSIVE ON indicator (PROGRESSIVE ON) . . . . . 15
3 VIDEO OFF indicator (VIDEO OFF) . . . . . . . . . . . . . . . . . . . 15
4 Disc tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5 GROUP button (GROUP) . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6 Skip/Search buttons (,,-) . . . . . . . . . . . . . 14
7 Stop button (º) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8 Pause button (;) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
9 Play button (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
: Disc tray open/close button (<) . . . . . . . . . . . . . . . . . . . . . 12
; Display
< VIDEO OFF button (VIDEO OFF) . . . . . . . . . . . . . . . . . . . . . 15
= Headphone level control (LEVEL) . . . . . . . . . . . . . . . . . . . . 22
> PROGRESSIVE ON button (PROGRESSIVE ON) . . . . . . . 15
? Headphone jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
@ Standby/on switch (STANDBY/ON) . . . . . . . . . . . . . . . . . . . 12
Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of
power.
Buttons such as # function the same
as the controls on the unit.
Control reference guide
Remote control
Page
A Numeric buttons (19, 0, S10) . . . . . . . . . . . . . . . . . . . . . . 13
B Set up button (SET UP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
C Top menu and Direct Navigator button
(TOP MENU, DIRECT NAVI) . . . . . . . . . . . . . . . . . . . . . . 13, 19
D Cursor buttons (3, 4, 2, 1)/Enter button (ENTER) . . . . 13
E On screen button (ON SCREEN) . . . . . . . . . . . . . . . . . . . . . 24
F Play mode button (PLAY MODE) . . . . . . . . . . . . . . . . . . . . . 17
G Subtitle button (SUBTITLE) . . . . . . . . . . . . . . . . . . . . . . . . . 23
H Repeat mode button (REPEAT) . . . . . . . . . . . . . . . . . . . . . . 21
I A-B repeat button (A-B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
J Skip buttons (:, 9SKIP) . . . . . . . . . . . . . . . . . . . . . . . 14
K Cancel button (CANCEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
L Marker button (MARKER) . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
M Page button (PAGE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
N Text button (TEXT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
O Menu and Play List button (MENU, PLAY LIST) . . . . . 13, 20
P Return button (RETURN) . . . . . . . . . . . . . . . . . . . . . . . . 24, 28
Q Angle button (ANGLE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
R Audio button (AUDIO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
S Headphone and Speaker V.S.S. buttons
(HP-V.S.S./SP-V.S.S.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
T Slow/Search buttons (6, 5SLOW/SEARCH) . . . . . . . 14
Getting started
8
As this unit has built-in Dolby Digital and DTS decoders ( page 34), you can enjoy discs recorded with these systems by connecting this unit to
the 6-channel input terminals on an AV amplifier (connection [B] below). However, to enjoy the special sound effects available with AV amplifiers
that can make you feel like you were in a cinema or hall, connect this unit digitally to the AV amplifier (connection [A] below).
Use analog connection [B] to enjoy the high quality audio (sampling frequencies of 192 kHz and 96 kHz) and multi-channel audio found
on DVD-Audio. If the disc is copyright-protected, the audio can only be output through the digital output terminal if it is converted to 48
kHz.
What you want to do
º Other uses
Recording to MDs or cassette tapes ( page 11).
Note
³The equipment connections described are examples.
³Peripheral equipment and optional cables sold separately unless otherwise indicated.
³Before connection, turn off all equipment and read the appropriate operating instructions.
To enjoy 5.1-channel surround
sound
To enjoy stereo
10 [B]
Settings
Reference
page
Speaker Setting
Select Multi-channel.
32
[Digital\connection]
Connect to an amplifier with
built-in decoder or a separate
decoder-amplifier combination.
9 [A] Digital Audio Output
Select On.
PCM Down Conversion
Dolby Digital
DTS Digital Surround
Change the settings to suit
the equipment you connect.
Make the speaker settings on
the amplifier or decoder.
29
33
[Analog\connection]
Connect to an amplifier or
system component with analog
input terminals.
10 [D]
9 [C][Digital\connection]
Connect to an amplifier with a
digital input terminal.
Digital Audio Output
Select On.
PCM Down Conversion
Change the settings to suit
the equipment you connect.
Dolby Digital and DTS
Digital Surround
Select PCM.
29
33
Reference
page
How to do it
Connection
Manufactured under license from Digital Theater Systems,
Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762
and other world-wide patents issued and pending. DTS and
DTS Digital Surround are registered trademarks of Digital
Theater Systems, Inc. + 1996, 2000 Digital Theater Sys-
tems, Inc. All rights reserved.
[Analog\connection]
Connect to an amplifier with
5.1-channel audio input
terminals.
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic and the double-D symbol are trademarks
of Dolby Laboratories. Confidential unpublished works.
+ 19921997 Dolby Laboratories. All rights reserved.
9
Getting started
Before connection
³Disconnect the AC power supply cord.
³Refer to the amplifiers operating instructions.
STANDBY
/ON
NATURAL SOUND AV RECEIVER RXV3000
INPUT MODE
INPUT
VOLUME
SILENT
PHONES
SPEAKERS
B
A
PROCESSOR
DIRECT
BASS
EXTENSION
BASS TREBLE REC OUT/ZONE 2
VIDEO AUX
VCR 1
SAT
CABLE
D-TV/LD
DVD
SOURCE
/REMOTE
MD/TAPE
CD-R
TUNER
CD
PHONO
VCR 2/DVR
EFFECT
6CH
INPUT
TUNING
MODE
MEMORY
S VIDEO VIDEO L R OPTICALAUDIO
MAN'L/AUTO FM AUTO/NAN'L MONO
FM/AM
PRESET
/TUNING
DSP
PROGRAM
EDIT
VIDEO AUX
L
R
RR
LL
AC IN
COMPONENT
VIDEO OUT
(480p / 480l)
Y
Pa
P
R
MIXED 2CH
COAXIALOPTICAL
PCM / DIGITAL
DTS
2
AUDIO OUT
6CH DISCRETE
SURROUND MAINCENTER
SUBWOOFER
S VIDEO
VIDEO
1
VIDEO OUT
VIDEO
IN
»
A
Connecting an AV amplifier with a built-in decoder
Speakers
You can enjoy surround sound by connecting from
three to six speakers.
Example: Six speakers
If you do not connect a subwoofer, it is advisable
to connect main speakers (L/R) capable of
producing bass of less than 100 Hz.
Do not connect the units
video output through a vid-
eo cassette recorder
The video from this unit may
not be played correctly due to
copy-guards if you connect
a video cassette recorder
between the unit and your
television.
MONITOR OUT
terminal
Television
Video cable
AV amplifier
VIDEO INPUT
terminal
Audio/video
cable
To household
AC outlet
(AC 120V, 60 Hz)
Back of the unit
AC power
supply cord
(included)
Audio/video cable (included)
Yellow (VIDEO)
White (L)
Red (R)
Change PCM Down Conversion, Dolby Digital, and DTS
Digital Surround to suit the equipment ( pages 29
and 33).
Conserving power
This unit consumes a small amount of power, even when it is turned
off (approx. 2 W ). To save power when the unit is not to be used for
a long time, unplug it from the household AC outlet.
Note
You cannot use DTS Digital Surround decoders not suited to
DVD-Video.
»
C
Connection to digital audio
equipment without a decoder
You can still enjoy audio using the connections described above.
Make the following settings ( pages 29 and 33).
³Digital Audio Output On
³PCM Down Conversion Yes
³Dolby Digital and DTS Digital Surround PCM
Note when connecting the
optical digital audio cable
Remove the
dust cap
Align the plug with
the terminal
Note
Keep the dust cap and reattach
when not using the terminal.
DIGITAL
INPUT
(COAXIAL)
terminal
DIGITAL
INPUT (OPTICAL)
terminal
Optical
digital
audio cable
Do not bend
when
connecting.
OR
Coaxial
cable
10
Getting started
STANDBY
/ON
NATURAL SOUND AV RECEIVER RX–V3000
INPUT MODE
INPUT
VOLUME
SILENT
PHONES
SPEAKERS
B
A
PROCESSOR
DIRECT
BASS
EXTENSION
BASS TREBLE REC OUT/ZONE 2
VIDEO AUX
VCR 1
SAT
CABLE
D-TV/LD
DVD
SOURCE
/REMOTE
MD/TAPE
CD-R
TUNER
CD
PHONO
VCR 2/DVR
EFFECT
6CH
INPUT
TUNING
MODE
MEMORY
S VIDEO VIDEO L R OPTICALAUDIO
MAN'L/AUTO FM AUTO/NAN'L MONO
FM/AM
PRESET
/TUNING
DSP
PROGRAM
EDIT
VIDEO AUX
L
R
RR
LL
COMPONENT
VIDEO OUT
(480p / 480l)
Y
Pa
P
R
MIXED 2CH
COAXIALOPTICAL
PCM / DIGITAL
DTS
2
AUDIO OUT
6CH DISCRETE
SURROUND MAINCENTER
SUBWOOFER
S VIDEO
VIDEO
1
VIDEO OUT
RL
»
B
Connecting an AV amplifier with 5.1-channel audio input terminals
Be sure to switch the amplifier to ANALOG input.
Connection
³Speaker connections ( page 9)
³Television connections ( pages 9 and 11)
Change “Speaker setting” ( page 32).
Note
³Turn speaker and headphone V.S.S. ( page 22) off when you connect through the 6CH DISCRETE terminals. The unit does not output the
signals for channels other than the front speakers when V.S.S. is on.
»
D
Analog connection to a 2-channel amplifier or system component
To enjoy Dolby Pro Logic
³If you connect an amplifier that can decode Dolby Pro Logic, you will also need to connect center and surround speakers to enjoy
surround sound. Read the instructions for the equipment for connection details.
³Turn Virtual Surround off ( page 22). Dolby Pro Logic will not function correctly if Virtual Surround is on.
L
R
RR
LL
AC IN
COMPONENT
VIDEO OUT
(480p / 480l)
Y
Pa
P
R
MIXED 2CH
COAXIALOPTICAL
PCM / DIGITAL
DTS
2
AUDIO OUT
6CH DISCRETE
SURROUND MAINCENTER
SUBWOOFER
S VIDEO
VIDEO
1
VIDEO OUT
R
L
AUX IN
VIDEO
IN
AV amplifier
Back of the unit
Back of the unit
2-channel amplifier or system component
Audio cable
Video cable
Television
Audio cable
Audio cable
6CH
INPUT
terminals
11
Getting started
STANDBY
/ON
NATURAL SOUND AV RECEIVER RXV3000
INPUT MODE
INPUT
VOLUME
SILENT
PHONES
SPEAKERS
B
A
PROCESSOR
DIRECT
BASS
EXTENSION
BASS TREBLE REC OUT/ZONE 2
VIDEO AUX
VCR 1
SAT
CABLE
D-TV/LD
DVD
SOURCE
/REMOTE
MD/TAPE
CD-R
TUNER
CD
PHONO
VCR 2/DVR
EFFECT
6CH
INPUT
TUNING
MODE
MEMORY
S VIDEO VIDEO L R OPTICALAUDIO
MAN'L/AUTO FM AUTO/NAN'L MONO
FM/AM
PRESET
/TUNING
DSP
PROGRAM
EDIT
VIDEO AUX
L
R
RR
LL
COMPONENT
VIDEO OUT
(480p / 480l)
Y
Pa
P
R
MIXED 2CH
COAXIALOPTICAL
PCM / DIGITAL
DTS
2
AUDIO OUT
6CH DISCRETE
SURROUND MAINCENTER
SUBWOOFER
S VIDEO
VIDEO
1
VIDEO OUT
A B
Connections using the S video or component video terminals
Audio connections ( pages 9 and 10)
[A] S VIDEO OUT terminal
The S VIDEO terminal achieves a more vivid picture than the
VIDEO terminal by separating the chrominance (C) and luminance
(Y) signals. (Actual results depend on the television.)
[B] COMPONENT VIDEO OUT terminal
These terminals can be used for either interlace or progressive out-
put and provide a purer picture than the S VIDEO terminal.
Connection using these terminals outputs the color difference sig-
nals (P
B/PR) and luminance signal (Y) separately in order to achieve
high fidelity in reproducing colors.
³The description of the component video input terminals depends
on the television or monitor (e.g. Y/P
B/PR, Y/B-Y/R-Y, Y/CB/CR).
Connect to terminals of the same color.
³After making this connection, change the black level for a better
picture ( page 29, VideoBlack Level Control).
To enjoy progressive video
1. Connect to the component video (480p) input terminals on
a television compatible with this units copy guard system.
Video will not be displayed correctly if you connect to a
television that is incompatible with this units copy guard
system.
2. Press [PROGRESSIVE ON] on the front panel so the
indicator lights ( page 15).
Recording to MDs or cassette tapes
To make a digital recording
1. Connect the recording equipment with an optical or coaxial digit-
al audio cable ( page 9 [A]).
2. When recording DVDs, make the following settings.
VIRTUAL SURROUND (V.S.S.): OFF ( page 22)
Digital Audio Output: On ( page 29)
PCM Down Conversion: Yes ( page 29)
Dolby Digital and DTS Digital Surround: PCM ( page 29)
Note
³With CDs, wait for the total play time to appear before turning on
your recording units synchro recording feature. The beginning
may be cut off if you turn it on while READING is displayed.
³With DVDs, recording may be interrupted when a new chapter be-
gins. Use analog recording if this persists.
These phenomena occur because DVD players must first deter-
mine the audio format and sampling frequency before switching
digital output.
º Analog recording
You can record to an MD or cassette deck. Using analog connection
means sound will be unaffected by the copy guards found on DVDs.
To make an analog recording
Connect the recording equipment with an audio cable
( page 10 [D]).
º Digital recording
You can record the digital signal directly onto an MD.
The signals on DVDs will be converted to 48 kHz/16 bit linear PCM.
Ensure the following conditions are met.
³There is no copy guard recorded on the disc.
³The recording equipment can handle a sampling frequency of
48 kHz/16 bit.
Back of the unitAV amplifier
S video cable
Television
Video cable
Video cable
VIDEO
INPUT
terminal
MONITOR OUT
terminal
VIDEO, S VIDEO
or COMPONENT
VIDEO INPUT
terminal
Basic operations
12
1
2
3
4
A
Reading
Close
Open
TITLE
CHAP
DVD
VIDEO
TITLE
DVD
VIDEO
CHAP
POWER
Í
/I
OPEN/CLOSE
PLAY
PAUSE
NATURAL SOUND DVD AUDIO / VIDEO PLAYER DVD-S1200
PROGRESSIVE ON
VIDEO OFF
GROUP
LEVEL
010
PHONES
STANDBY
STANDBY
/ON
AUDIO
/
VIDEO
PROGRESSIVE ON
GROUP
STANDBY
STANDBY
/ON
1234
5678
90
S
10
CANCEL
OPEN/CLOSE
POWER
MARKER
TEXTTEXTPAG EGROUP
ENTER
VIDEO OFF
PLAY MODE
SKIP
SLOW
/
SEARCH
SUBTITLE
DVD
V739700
AUDIO ANGLE
REPEAT
A
-
B
HP-V.S.S. SP-V.S.S.
TOP MENU
MENU
ON SCREEN RETURN
PLAY LISTDIRECT NAVI
SET UP
Í
/I
AUDIO
/
VIDEO
PLAYPAUSESTOP
OPEN/CLOSE
POWER
Í
/I
STOP PLAYPAUSE
12
4
TEXT
;
123
4
;PROGRESSIVE ON
Label must face upward.
(With double-sided discs,
load so the label for the side
you want to play is facing up.)
Units display (e.g. DVD-Video is loaded)
Basic play
[RAM] [DVD-A] [DVD-V] [VCD] [CD]
Preparation
Turn on the television and select the appropriate video input on the
television to suit the connections for the player.
1 Press [ê/I, POWER] to turn on the
unit.
For progressive output
Press [PROGRESSIVE ON] so the indicator lights.
2 Press [OPEN/CLOSE] to open the disc
tray.
3 Place the disc on the disc tray.
Remove TYPE 2 discs from their cartridges before use.
4 Press [1] (PLAY).
The disc tray closes and play begins.
º To stop play
Press [º] (page 13, Resume function).
º To pause play [A]
Press [;] during play.
Press [1] (PLAY) to restart play.
º Displaying the text information on discs
[DVD-A] [DVD-V] [CD]
Remote control only
You can display the disc title, artist name, and track titles on the
television if this information is recorded on the disc.
Press [TEXT].
The text display is turned on and off each time you press the button.
Some text information also scrolls across the units display.
³The unit cannot display the text on some discs.
Note
³If appears on the television
The operation is prohibited by the unit or disc.
³The disc continues to rotate while the menu is displayed even after
you finish playing an item. Press [º] when you finish to preserve
the units motor and your television screen.
³Volume may be lower when playing DVDs than when playing other
discs or during television broadcasts.
If you turn the volume up on the television or amplifier, ensure you
reduce the volume again before playing other sources so that a
sudden increase in output does not occur.
º Auto standby
The unit switches to the standby mode after about 30 minutes in the
stop mode.
Playing CD-R and CD-RW
This unit can play CD-DA (digital audio) and Video CD format
audio CD-R and CD-RW that have been finalized
¤
upon com-
pletion of recording.
It may not be able to play some CD-R or CD-RW due to the
condition of the recording.
¤
Finalizing is a process that enables CD-R/CD-RW players to
play audio CD-R and CD-RW.
13
Basic operations
Basic play
When a menu screen appears on the
television
[DVD-A] [DVD-V] [VCD]
Remote control only
Press the numeric buttons to select an
item.
To select a 2-digit number
Example: To select item 23, press [S10] [2] [3].
³When playing DVDs, you can also use the cursor buttons
[3, 4, 2, 1] to select items. Press [ENTER] to confirm your
selection.
Play of the selected item now begins.
Other buttons used to operate menus
Read the discs instructions for further details about operation.
[9] or [-]: Shows the next menu.
[:] or [,]: Shows the previous menu.
[RETURN]: Shows the menu screen. [VCD]
[TOP MENU]: Shows the first menu screen. [DVD-A] [DVD-V]
[MENU]: Shows the menu screen. [DVD-V]
]A\ DVD menus
DVD-Video can have several menus. The menu displayed when you
press [TOP MENU] may be different from the menu displayed when
you press [MENU].
»
B
Resume function
[RAM] [DVD-A] [DVD-V] [VCD] [CD]
The position you stopped play at is recorded by the unit when ! is
flashing on the units display.
While ! is flashing on the units display, press [1] (PLAY) to start
play from where you stopped it.
If you are playing DVD-Video, the illustrated message also appears.
Press [1] (PLAY) while the message is displayed and the beginning
portions of each chapter up to the current one are played. Full play
resumes from the point where you stopped play.
(This feature works only within a title.)
If you do not press [1] (PLAY), the message disappears and play
starts from where you stopped it.
To cancel
Press [º] until ! disappears from the units display.
Note
³The resume function does not work if the discs play time is not
displayed.
³The position is cleared when the disc tray is opened.
³The unit saves the position even when you switch the unit to stand-
by except when playing a play list ( page 20).
»
C
Starting play from a selected
program, title, or track
[RAM] [DVD-A] [DVD-V] [VCD] [CD]
Remote control only
Press the numeric buttons to select the
item.
To select a 2-digit number
Example: To select track 23, press [S10] [2] [3].
Play starts from the selected item.
Note
³This works only when stopped with some discs.
³This may not work with some discs.
³When playing DVD-Audio and you want to start play from a track in
a different group, select the group first ( page 15).
C
B
A
Press PLAY to Chapter Review
DVD
VIDEO
TRACK
VCD
1
2
34
56
78
90
S
10
TOP MENU
MENU
NATURAL SOUND DVD AUDIO / VIDEO PLAYER DVD-S1200
PROGRESSIVE ON
VIDEO OFF
GROUP
LEVEL
010
PHONES
STANDBY
STANDBY
/ON
AUDIO
/
VIDEO
1234
5678
90
S
10
CANCEL
OPEN/CLOSE
POWER
MARKER
TEXTPAG EGROUP
ENTER
VIDEO OFF
PLAY MODE
SKIP
SLOW
/
SEARCH
SUBTITLE
DVD
V739700
AUDIO ANGLE
REPEAT
A
-
B
HP-V.S.S. SP-V.S.S.
TOP MENU
MENU
ON SCREEN RETURN
PLAY LISTDIRECT NAVI
SET UP
Í
/I
AUDIO
/
VIDEO
PLAYPAUSESTOP
MENU
PLAY LIST
1 2 3 4
5 6 7 8
9 0
S
10
STOP PLAY
SKIP
RETURN
TOP MENU
DIRECT NAVI
MENU
∫1
1
RETURN
TOP MENU
:, 9
ENTER
Title Title Title
MenuMenu
The discs
top menu
Menu
Numeric
buttons
e.g. Video CD
Cursor buttons/
ENTER
Basic operations
14
A
B
C
D
[
:
][
9
]
[
:
/6][5/
9
]
SKIP
SLOW
/
SEARCH
SLOW
/
SEARCH
NATURAL SOUND DVD AUDIO / VIDEO PLAYER DVD-S1200
PROGRESSIVE ON
VIDEO OFF
GROUP
LEVEL
010
PHONES
STANDBY
STANDBY
/ON
AUDIO
/
VIDEO
;
1
MARKER
TEXTPAG EGROUP
ENTER
VIDEO OFF
PLAY MODE
SKIP
SLOW
/
SEARCH
SUBTITLE
DVD
V739700
AUDIO ANGLE
REPEAT
A
-
B
HP-V.S.S. SP-V.S.S.
TOP MENU
MENU
ON SCREEN RETURN
PLAY LISTDIRECT NAVI
SET UP
PLAYPAUSESTOP PLAY
SLOW
/
SEARCH
PAUSE
SKIP
1
6, 5
:, 9
;
Basic play
»
A
Skipping
[RAM] [DVD-A] [DVD-V] [VCD] [CD]
You can skip chapters on DVD-Video, tracks on DVD-Audio, CDs,
and Video CDs, and on DVD-RAM you can skip to the start of a
program, scene in a play list, or to a marker.
During play or while paused
Press [:] or [9].
³Each press increases the number of skips.
³Press ["] or [#] on the main unit.
»
B
Frame-by-frame viewing
[RAM] [DVD-A] [DVD-V] [VCD]
Remote control only
While paused
Press the cursor buttons [2] or [1].
The frame changes each time you press the cursor buttons.
³The frames change in succession if you press and hold the button.
³Pressing [;] also activates forward frame-by-frame.
»
C
Fast forward and rewindSEARCH
[RAM] [DVD-A] [DVD-V] [VCD] [CD]
During play
Press [6] or [5].
Press and hold ["] or [#] on the main unit.
For your reference
Audio will be heard during search for most discs. You can turn this
audio off if you want to (page 29, AudioAudio during Search).
»
D
Slow-motion play
[RAM] [DVD-A] [DVD-V] [VCD]
While paused
Press [6] or [5].
Press and hold ["] or [#] on the main unit.
Notes
³The speed of search and slow-motion increases up to
5 steps.
³Press [1] (PLAY) to restart play.
³You cannot move backwards with Video CD during frame-
by-frame and slow-motion.
³Frame-by-frame and slow motion only work on the moving
picture parts of DVD-Audio.
³[,], [2] or [6]: Backward
[-], [1] or [5]: Forward
When playing Video CDs with playback control
Pressing buttons to perform skipping, search, or slow-motion
may take you to a menu screen.
twice once
Chapter/Track Chapter/Track Chapter/Track
once
twice
Play position
Cursor buttons
or
or
or
Program Program Program
twice once
once
twice three times
Play position
Marker
[RAM]
[DVD-A] [DVD-V] [VCD] [CD]
15
Basic operations
B
C
D
A
PAGE 1
T
1
G
1
PAG E
GROUP
VIDEO OFF
VIDEO OFF
GROUP
NATURAL SOUND DVD AUDIO / VIDEO PLAYER DVD-S1200
PROGRESSIVE ON
VIDEO OFF
GROUP
LEVEL
010
PHONES
STANDBY
STANDBY
/ON
AUDIO
/
VIDEO
VIDEO OFF
GROUP
PROGRESSIVE ON
1234
5678
90
S
10
CANCEL
OPEN/CLOSE
POWER
MARKER
TEXTPAG EGROUP
ENTER
VIDEO OFF
PLAY MODE
SKIP
SLOW
/
SEARCH
SUBTITLE
DVD
V739700
AUDIO ANGLE
REPEAT
A
-
B
HP-V.S.S. SP-V.S.S.
TOP MENU
MENU
ON SCREEN RETURN
PLAY LISTDIRECT NAVI
SET UP
Í
/I
AUDIO
/
VIDEO
PLAYPAUSESTOP
1 2 3 4
5 6 7 8
9 0
S
10
CANCEL
PAG EGROUP
ENTER
VIDEO OFF
PLAY
1
GROUPVIDEO OFF
PROGRESSIVE ON
CANCEL
PAGE
VIDEO OFF
1
1
2·3
Basic play
»
A
Selecting still picturesPage Skip
[DVD-A]
Remote control only
During play
Press [PAGE].
The page changes each time you press the button.
»
B
Selecting groups to play
[DVD-A]
The tracks on DVD-Audio are divided into groups. How these
groups are played differs with the disc so read the instructions that
came with the disc for further details.
1 Press [GROUP].
The group and track icons are displayed.
2 Press the cursor buttons [3, 4] to
select the group number and press
[ENTER].
3 Press the cursor buttons [3, 4] to
select the track number and press
[ENTER].
The selected group and track begin to play.
³You can also select groups with the remote controls numeric but-
tons or [GROUP] on the main unit. Press [1] (play) to start playing
the selected group.
³Selection may not be allowed in some situations.
Playing all the groups in succession ( page 17)
Playing bonus groups
Some discs contain bonus groups. To enjoy these groups you may
have to enter a password. Refer to the discs jacket.
1. While stopped press [GROUP].
2. Press the cursor buttons [3, 4] to select the bonus group and
press [ENTER] or [1] (PLAY).
3. Enter the 4-digit password with the remote controls numeric
buttons and press [ENTER].
4. Press the cursor buttons [3, 4] to select a track and press
[ENTER] to start play.
³Some discs will show a menu screen for you to enter your pass-
word. Follow the instructions on the screen.
³The bonus group can be played as many times as you like after the
password has been entered until the disc is removed from the unit.
Note
If you enter the wrong password, the previous screen will be
displayed. Start again from the beginning. You can erase it by
pressing [CANCEL].
»
C
To enjoy even higher quality
soundVIDEO OFF
[RAM] [DVD-A] [DVD-V] [VCD] [CD]
You can enjoy higher quality audio by stopping the video signal.
Press [VIDEO OFF].
³The light above the button on the main unit lights.
³VIDEO OFF is canceled if you press the button again or turn the
unit off. The light goes out.
Note
Video signals are output while the disc is stopped and when opera-
tions such as searching are performed. The television can appear
unusual while video signals are not being output.
»
D
To enjoy even higher quality
picturePROGRESSIVE ON
[RAM] [DVD-A] [DVD-V] [VCD]
The component video output terminals (Y, P
B/CB, PR/CR) can output
progressive signals. You can obtain a sharp and smooth high-
quality picture with less flicker using a television that can receive
progressive signals. ( page 11)
Press [PROGRESSIVE ON].
³The PROGRESSIVE ON indicator lights.
³PROGRESSIVE ON is canceled if you press the button again. The
indicator goes out.
e.g. Page 1
Numeric
buttons
or
or
Advanced operations
16
Marking places to play
againMARKER
Remote control only
You can mark specific points on a disc to return to later. This feature
only works if the elapsed playing time of the disc is shown on the
units display.
[DVD-A] [DVD-V] [VCD] [CD]
Press [MARKER].
The marker icon appears.
Press [MARKER] at the point you want
to mark.
To select another marker, press the cursor button [1].
You can mark up to 5 points.
[RAM]
You can mark up to 999 points.
1 Press [MARKER].
The marker icon appears and if the disc already has markers,
they are displayed.
2 Press the cursor button [1] to high-
light the first marker, then press
[MARKER] at the point you want to
mark.
To mark the eleventh point and beyond
Select the next group of 10 as follows.
1. Press the cursor button [2, 1] to highlight the marker pin icon.
2. Press the cursor button [3] to select 1120.
You can select the next group of 10 when the current group is full.
To clear the marker display
Press [RETURN].
To play from a marked position
Press the cursor button [2, 1] to select a marker number and press
[ENTER].
To clear a marker
Press the cursor button [2, 1] to select a marker number and press
[CANCEL].
³You can clear existing markers, but they are restored when you
open the disc tray or switch the unit to standby.
Note
³All the markers added with this unit are cleared when the unit is
switched to standby or the disc tray is opened.
[RAM]
³This feature doesnt work while using a play list.
³The markers are ordered by time. This means that the marker
numbers can change when you add and erase markers.
2
1
✱✱✱✱
1 ✱✱✱✱
2
1
110
✱✱✱✱✱✱✱✱✱
110
1 ✱✱✱✱✱✱✱✱✱
110
✱✱✱✱✱✱✱✱✱✱
MARKER
MARKER
MARKER
MARKER
1234
5678
90
S
10
CANCEL
OPEN/CLOSE
POWER
MARKER
TEXTPAG EGROUP
ENTER
VIDEO OFF
PLAY MODE
SKIP
SLOW
/
SEARCH
SUBTITLE
DVD
V739700
AUDIO ANGLE
REPEAT
A
-
B
HP-V.S.S. SP-V.S.S.
TOP MENU
MENU
ON SCREEN RETURN
PLAY LISTDIRECT NAVI
SET UP
Í
/I
AUDIO
/
VIDEO
PLAYPAUSESTOP
RETURN
CANCEL
MARKER
ENTER
RETURN
1·2
1·2
2
CANCEL
110
123456789
10
1120
✱✱✱✱✱✱✱✱✱✱
Marker pin icon
17
Advanced operations
A
2
1
B
1
2
3
DVD
AUDIO
RND
DVD
AUDIO
RND
Press PLAY to start
All Group Playback
Choose a group or groups
Random Playback
0 Press PLAY to start
RETURN
SELECT
ENTER
ALL 1 2 3
¢
Choose a group or groups
All 1 2 3
Random Playback
0 Press PLAY to start
RETURN
SELECT
ENTER
1234
5678
90
S
10
CANCEL
OPEN/CLOSE
POWER
MARKER
PAG EGROUP
ENTERENTER
VIDEO OFF
PLAY MODE
SKIP
SLOW
/
SEARCH
SUBTITLE
PLAYPAUSESTOP
DVD
V756260
AUDIO ANGLE
REPEAT
A
-
B
HP-V.S.S. SP-V.S.S.
TOP MENU
MENU
ON SCREEN RETURN
SET UP
Í/I
AUDIO
/
VIDEO
PLAY
PLAY MODE
PLAY MODE
PLAY
ENTER
CANCEL
1·1
2·3
2
Changing the play sequence
Remote control only
»
A
All group play
[DVD-A]
The unit plays the tracks in all the groups on a disc.
1 While stopped
Press [PLAY MODE] until the all group
play screen appears.
2 Press [1] (PLAY).
»
B
Random play
[DVD-A] [VCD] [CD]
The unit plays the tracks on a disc in random order.
While stopped
Press [PLAY MODE] until the random
play screen appears.
[DVD-Audio\only]
Press the cursor buttons [2, 1] to se-
lect a group and press [ENTER].
³You can select more than one group.
³You can also select groups with the numeric buttons.
! Press [1] (PLAY).
Play now begins in random order.
To clear a group [DVD-A]
1. Press the cursor buttons [2, 1] to select the group you want to
clear.
2. Press [CANCEL] or [ENTER].
³Groups can also be erased by entering the group number with the
numeric buttons.
To exit random mode
Press [PLAY MODE] while stopped until the random play screen
disappears.
Note
If you select bonus groups on DVD-Audio during random play, you
will have to enter a 4-digit password ( page 15).
e.g. DVD-Audio (three groups)
Numeric
buttons
Advanced operations
18
5
1
3·4
2
PLAY MODE
ENTER
RETURN
6
∫ 1
5
Choose a group and track, then press ENTER.
No Time
G
Total Time
0 Press PLAY to start
T
Play
Clear
Clear all
0:00
PLAY MODE
RETURN
6
∫ 1
5
Choose a group and track, then press ENTER.
Time
Total Time
0 Press PLAY to start
Play
Clear
Clear all
2:02
2:02
No
G
1
T
1
PLAY MODE
RETURN
6 ∫ 1
5
Choose a group and track, then press ENTER.
Time
Total Time
0 Press PLAY to start
Play
Clear
Clear all
No
G
T
PGM
GROUP
TRACK
DVD
AUDIO
PGM
GROUP
TRACK
DVD
AUDIO
5
2
SELECT
1
SELECT
ENTER
0:00
SELECT
ENTER
1
1
PLAY MODE
ENTER
ENTER
PLAY
1234
5678
90
S
10
CANCEL
OPEN/CLOSE
POWER
MARKER
TEXTPAG EGROUP
ENTER
VIDEO OFF
PLAY MODE
SKIP
SLOW
/
SEARCH
SUBTITLE
DVD
V739700
AUDIO ANGLE
REPEAT
A
-
B
HP-V.S.S. SP-V.S.S.
TOP MENU
MENU
ON SCREEN RETURN
PLAY LISTDIRECT NAVI
SET UP
Í
/I
AUDIO
/
VIDEO
PLAYPAUSESTOP
1 2 3 4
5 6 7 8
9 0
S
10
CANCEL
ENTER
PLAY
SLOW
/
SEARCH
PLAY MODE
CANCEL
6, 5
2·3·4
5
1
Changing the play sequence
[DVD-A] [VCD] [CD]
Remote control only
Program play
You can select up to 32 tracks to play in the order you choose.
1 While stopped
Press [PLAY MODE] until the program
play screen appears.
2 Press [ENTER].
3 [DVD-Audio\only]
Press the cursor buttons [3, 4] to se-
lect a group and press [ENTER].
4 Press the cursor buttons [3, 4] to se-
lect a track and press [ENTER].
Each time you press the cursor button,
1()2<- - - - - - ->ALL
^---------------------------------------J
³Repeat steps 2, 3 and 4 to program other tracks.
³You can also select a group or track with the numeric but-
tons.
³Total Time tells you the total time of the programmed
tracks.
³All the tracks on a disc are selected when you select ALL
(all the tracks in the selected group with DVD-Audio).
5 Press [1] (PLAY).
Play now begins in the programmed sequence.
To add or change tracks
1. Press the cursor buttons [3, 4] to select an available item.
2. Repeat steps 24 to make the changes.
To move to the page before or after the one shown
Press [6] or [5].
To clear the programmed tracks one by one
Press the cursor buttons [3, 4] to select the item number (No) and
press [CANCEL]. Alternatively, press the cursor buttons [3, 4, 2,
1] to select Clear and press [ENTER].
To clear the whole program
Press the cursor buttons [3, 4, 2, 1] to select Clear all and
press
[ENTER].
The whole program is also cleared when the unit is turned off, or the
disc tray is opened.
To exit the program mode
Press [PLAY MODE] while stopped until the program play screen
disappears.
³The program is retained in memory.
Note
If you select bonus groups on DVD-Audio during program play, you
will have to enter a 4-digit password ( page 15).
Track No.
Program No.
e.g. DVD-Audio
Group No.
Numeric
buttons
19
Advanced operations
1
2
3
DIRECT NAVIGATOR
No DATE CH
On
Program Title
Contents
1
2
3
4
5
12/23(SAT)
12/26(TUE)
1/12(FRI)
1/24(WED)
2/20(TUE)
10
4
2
5
12
21:02
14:35
20:00
19:30
19:05
Saturday feature
Auto action
Sunday Cinema
Music
Baseball
SELECT
ENTER
RETURN
No
1
2
3
4
5
DIRECT NAVIGATOR
DATE CH
On
Program Title
Contents
12/26(TUE)
1/12(FRI)
1/24(WED)
2/20(TUE)
10
4
2
5
12
14:35
20:00
19:30
19:05
Saturday feature
Auto action
Sunday Cinema
Music
Baseball
SELECT
ENTER
RETURN
12/23(SAT)
21:02
TOP MENU
PLAY
1234
5678
90
S
10
CANCEL
OPEN/CLOSE
POWER
MARKER
TEXTPAG EGROUP
ENTER
VIDEO OFF
PLAY MODE
SKIP
SLOW
/
SEARCH
SUBTITLE
DVD
V739700
AUDIO ANGLE
REPEAT
A
-
B
HP-V.S.S. SP-V.S.S.
TOP MENU
MENU
ON SCREEN RETURN
PLAY LISTDIRECT NAVI
SET UP
Í
/I
AUDIO
/
VIDEO
PLAYPAUSESTOP
1 2 3 4
5 6 7 8
9 0
S
10
ENTER
TOP MENU
DIRECT NAVI
PLAY
1
2·3
3
DIRECT NAVI
Playing the programs on
DVD-RAM
[RAM]
Remote control only
Selecting programs to play
DIRECT NAVIGATOR
When a program list is recorded on the disc, you can use it to find
programs you want to watch and start play.
1 Press [DIRECT NAVI].
The program list is displayed and the program currently
selected plays in the background.
2 Press the cursor buttons [3, 4] to
select the program you want to watch.
You can also select a program with the numeric buttons.
Step 3 is unnecessary.
To enter a 2-digit number
Example: 17, press, [S10] [1] [7].
3 Press [1] (PLAY) or [ENTER].
Play of the program that was playing in the background
continues.
To clear the program list
Press [DIRECT NAVI].
(The unit returns to the condition it was in before you called up the
program list.)
To display information about a selected program
1. Do steps 1 and 2 to select the program, then press the cursor
button [1] to select Contents on the right side of the list.
2. Press [ENTER].
The background picture pauses. Press [ENTER] to return to the pro-
gram list.
If there are 6 or more programs
Press the cursor button [4] while program 5 is highlighted.
The programs not currently shown are displayed each time you
press the cursor button.
For your reference
³Program and disc titles are displayed only if they have been
entered.
³You cannot change program and disc titles.
e.g. when program 2 has been selected.
Numeric
buttons
Advanced operations
20
5
1
3
2
PLAYLIST
1
23
45
6
No
Date Length
Title
Contents
1
2
3
4
Memory lane
Auto action
A weekend in Paris
Soccer
0:46:35
0:09:15
0:12:32
0:07:30
SELECT
ENTER
RETURN
10/17
10/24
11/29
12/22
World
Best Hit
PLAYLIST
1
23
45
6
SELECT
ENTER
RETURN
View
Scene List
Program contents
World
Best Hit
4
PLAYLIST
SELECT
ENTER
RETURN
1 10/17 0:46:35 028 Memory lane
1
23
456
789
Next
1/004
0:00:19
World
Best Hit
MENU
PLAY LIST
ENTER
ENTER
ENTER
1234
5678
90
S
10
CANCEL
OPEN/CLOSE
POWER
MARKER
TEXTPAG EGROUP
ENTER
VIDEO OFF
PLAY MODE
SKIP
SLOW
/
SEARCH
SUBTITLE
DVD
V739700
AUDIO ANGLE
REPEAT
A
-
B
HP-V.S.S. SP-V.S.S.
TOP MENU
MENU
ON SCREEN RETURN
PLAY LISTDIRECT NAVI
SET UP
Í
/I
PLAYPAUSESTOP
RETURN
MENU
PLAY LIST
1 2 3 4
5 6 7 8
9 0
ENTER
STOP
1
2·3·4·5
RETURN
Playing the programs on DVD-RAM
[RAM]
Remote control only
Using the play list menu to play
specific scenes
Finding and playing particular scenes is simple if the disc has play
lists recorded on it.
1 Press [PLAY LIST].
The play list screen is displayed.
2 Press the cursor buttons [3, 4] to
select the play list you want to watch.
³If you press [ENTER] or select a play list with the numeric
buttons, all the scenes in the play list are played from the
beginning.
3 Press the cursor button [1] to select
Contents on the right side of the list
and press [ENTER].
4 Press the cursor buttons [3, 4] to
select Scene List and press
[ENTER].
5 Press the cursor buttons [3, 4, 2,
1] to select the scene you want to
watch and press [ENTER].
The scene starts playing.
³You cannot move the highlighting to places where a scene
is not displayed.
³If there are more than 9 scenes in the play list, press the
cursor buttons [3, 4, 2, 1] to select “Next” and press
[ENTER]. You can move back to the previous page by se-
lecting “Prev”.
To display information about a selected play list
1. Do steps 1 and 2 to select the play list.
2. Press the cursor button [1] to select “Contents” on the right side
of the list and press [ENTER].
3. Press the cursor buttons [3, 4] to select “Program contents”
and press [ENTER].
When play finishes
³After playing a play list: the play list selection screen appears.
³After playing a scene: the scene selection screen appears.
To return to the previous screen
Press [RETURN].
To clear the play list screen
Press [PLAY LIST].
The unit returns to the condition it was in before you called up the
play list.
To stop play list play
Press [º] until the screens clear.
Numeric
buttons
1 / 1

Yamaha DVD-S1200 Návod k obsluze

Kategorie
DVD přehrávače
Typ
Návod k obsluze