Yamaha Hub Návod k obsluze

Značka: Yamaha

Modelka: Hub

Kategorie: Hudební vybavení

Typ: Návod k obsluze

Tato příručka je také vhodná pro

NETWORK HUB A

NetworkAmp

Manager

NetworkAmp

Manager

Owner’s Manual

NetworkAmp Manager—Owner’s Manual

Important Information

Special Notices

•The software and this owner’s manual are the exclusive copyrights of Yamaha Corporation.

•Use of the software and this manual is governed by the license agreement which the pur-

chaser fully agrees to upon breaking the seal of the software packaging. (Please read care-

fully the Software Licensing Agreement at the beginning of the printed ACU16-C/NHB32-C

Owner’s Manual before installing the application.)

•Copying of the software or reproduction of this manual in whole or in part by any means is

expressly forbidden without the written consent of the manufacturer.

•Yamaha makes no representations or warranties with regard to the use of the software and

documentation and cannot be held responsible for the results of the use of this manual and

the software.

•This disc is a CD-ROM. Do not attempt to play the disc on an audio CD player. Doing so

may result in irreparable damage to your audio CD player.

•Copying of the commercially available music sequence data and/or digital audio ﬁles is

strictly prohibited except for your personal use.

•The screen displays as illustrated in this owner’s manual are for instructional purposes, and

may appear somewhat different from the screens which appear on your computer.

•Future upgrades of application and system software and any changes in speciﬁcations and

functions will be announced separately.

Trademarks

CobraCAD, CobraNet, and Peak Audio are trademarks of Cirrus Logic, Inc. Ethernet is a

trademark of Xerox Corporation. Windows is a registered trademark of Microsoft Corpo-

ration. Yamaha is a trademark of Yamaha Corporation. All other trademarks are the prop-

erty of their respective holders and are hereby acknowledged.

Yamaha Web Site

Information about NetworkAmp Manager, related products, and other Yamaha profes-

sional audio equipment is available on the Yamaha Professional Audio Web site at:

http://www.yamahaproaudio.com/.

Speciﬁcations and descriptions in this owner’s manual are for information purposes only.

Yamaha Corporation reserves the right to change or modify products or speciﬁcations at

any time without prior notice. Since speciﬁcations, equipment, or options may not be the

same in every locale, please check with your Yamaha dealer.

NetworkAmp Manager—Owner’s Manual

Contents

1 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

What is CobraNet? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Using Multiple PCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Installing NetworkAmp Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Starting NetworkAmp Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Quitting NetworkAmp Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Configuring NetworkAmp Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Working with Projects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3 Touring NetworkAmp Manager . . . . . . . . . . . . . . . 10

Main Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Network Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

4 NHB Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

CobraNet Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Patch Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Word Clock Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

5 ACU Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

CobraNet Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Patch Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Amp Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Channel Detail Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Threshold Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

6 Other Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Logging Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Locking NetworkAmp Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Using COM & MIDI Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Group View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Control Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Keyboard Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Introduction 4

NetworkAmp Manager—Owner’s Manual

1 Welcome

Introduction

The Yamaha NetworkAmp Manager software is for controlling and monitoring Yamaha

PCxxxxN series power ampliﬁers, the ACU16-C Amp Control Unit, and the NHB32-C

Network Hub and Bridge. It runs on standard Windows PCs and can be connected to an

ACU16-C or NHB32-C by using either USB or RS-232C. Multiple ACU16-Cs and

NHB32-Cs can be managed from a single PC running NetworkAmp Manager, which can

be connected to any ACU16-C or NHB32-C on the CobraNet network.

NetworkAmp Manager can record log ﬁles listing various operations and warnings (e.g.,

output shorts, overheating) for troubleshooting analysis after a performance.

Several PCs running NetworkAmp Manager can be connected to the CobraNet network,

offering simultaneous control and monitoring from several locations within a venue.

NetworkAmp Manager can control and manage the following:

Up to 512 Yamaha PCxxxxN series power ampliﬁers (32 amps per ACU16-C)

Up to 4,096 ampliﬁer channels (8 channels per ampliﬁer)

Up to 16 ACU16-Cs

Up to 8 NHB32-Cs

PCxxxxN Series Amp Parameters That Can Be Controlled

PCxxxxN Series Amp Parameters That Can Be Monitored

Parameter Details

Power

1. Affects the entire amplifier. All other parameters can be set for each channel individually.

On/standby

Attenuator 63-step control

Input phase Normal/reverse

Mute On/off

Parameter Details

Amp mode Stereo/parallel/bridge

Input level 12-segment meter

Output level 12-segment meter (watt/volt)

Output clip Output clipping indicator

Impedance Indicates current load impedance

Protection Protection system status

Temperature Heatsink temperature, 12-segment meter (centigrade/Fahrenheit)

5 Welcome

NetworkAmp Manager—Owner’s Manual

What is CobraNet?

CobraNet is technology developed by Peak Audio (Cirrus Logic, USA) that transmits

uncompressed digital audio signals in realtime over a fast Ethernet cable. It can carry up to

64 channels in each direction or 128 channels total for both directions (64 channels total for

both directions in a network that uses a repeater hub). (However, the number of channels

is limited by conditions such as the performance of your equipment and on the type of

audio signal.)

Tr ansmission of up to 100 meters is possible with Category 5 metal cable, or up to 2 km with

multi-mode optical ﬁber cable.

A CobraNet network can carry digital audio at sampling frequencies of 48 kHz or 96 kHz

and 16/20/24 bit resolutions, but the ACU16-C/NHB32-C support the 48 kHz sampling

frequency at 20/24 bit resolutions. A ﬁxed latency is added to the audio data each time it

passes through a CobraNet network. You can select this latency from 5.33 ms / 2.67 ms /

1.33 ms.

A CobraNet network can carry audio over an existing Fast Ethernet network to which other

devices such as computers and printers are already connected, but we strongly recommend

that you set up a dedicated network for CobraNet.

In a CobraNet network, digital audio is distributed in packets called “bundles.” Each bundle

contains between three and eight channels of audio, depending on conditions such as the

bit depth and latency.

Bundles are assigned a number in the range of 0 through 65,279. Bundles can be transmit-

ted either as “multicast bundles” which occupy more network bandwidth but allow audio

to be distributed to multiple devices simultaneously, or as “unicast bundles” which use less

network bandwidth but can distribute audio to only a single device. The number assigned

to the bundle determines which of these two types it is. Number 0 indicates a null setting

that disables transmission or reception of bundles, numbers 1 through 255 indicate multi-

cast bundles, and numbers 256 through 65,279 indicate unicast bundles. The

ACU16-C/NHB32-C support bundle numbers 0 through 16,383.

The ACU16-C can accept up to four input bundles simultaneously, and the NHB32-C can

use four input bundles and four output bundles simultaneously. However if you set the

latency to 1.33 ms, the number of bundles usable on the NHB32-C will be a maximum of

four (total for input and output).

A CobraNet network also provides a Serial Bridge feature that allows serial data to be trans-

mitted over the network. The ACU16-C and NHB32-C normally use the Serial Bridge to

transmit amp control data, but you can also use COM mode or MIDI mode to send other

data between two NHB32-C units via the Serial Bridge.

A glossary of CobraNet, NetworkAmp Manager, ACU16-C, and NHB32-C related terms is

provided in this manual (see page 39). A wealth of information about CobraNet, with sec-

tions especially for designers and installers, is available on the Peak Audio Web site at

http://www.peakaudio.com. If you are designing a CobraNet network, we strongly recom-

mend that you visit this Web site and study the information available in order to take full

advantage of the CobraNet technology. Peak Audio also provide a list of Ethernet devices

that have been tested with CobraNet, including switching hubs and media converters.

Using Multiple PCs 6

NetworkAmp Manager—Owner’s Manual

Using Multiple PCs

Several PCs running NetworkAmp Manager can be connected to the CobraNet network,

offering simultaneous control and monitoring from several locations within a venue.

Up to 16 channels of real-time data (e.g., level meter information) can be transmitted across

the network simultaneously. When operating NetworkAmp Manager on several PCs simul-

taneously, operation of the meter displays on the following pages may be interrupted:

•Amp pages

•Channel Detail page

•Group View page

When one of the above pages is selected, any other PCs displaying one of these pages will

automatically switch to its Network page and display the same information. For example, if

PC #1 is displaying the Amp 00–07 page, and PC #2 is displaying the Amp 24–31 page, if the

Amp 08–15 page is selected on PC #1, PC #2 will switch to its Network page and display the

same information. PCs that are not displaying one of the above pages do nothing.

7 Getting Started

NetworkAmp Manager—Owner’s Manual

2 Getting Started

Installing NetworkAmp Manager

System requirements and installation instructions for NetworkAmp Manager can be found

in the printed ACU16-C/NHB32-C Owner’s Manual.

Starting NetworkAmp Manager

To start NetworkAmp Manager, double-click the NetworkAmp Manager icon. If a startup

project has been speciﬁed on the General Setup dialog box (see page 8), that project is

opened. Otherwise, the Open dialog box appears and you can select the project you want to

open. NetworkAmp Manager can also be started by double-clicking a project ﬁle. In either

case, the following dialog box appears.

Disconnect from network: Start NetworkAmp Manager but do not connect to the

network.

Connect to network: Start NetworkAmp Manager and connect to the network, getting

the settings of all devices on the network and updating the project settings accordingly.

Connect & send to network: Start NetworkAmp Manager, connect to the network,

and send the project settings to all devices on the network, updating them accordingly.

Quitting NetworkAmp Manager

To quit NetworkAmp Manager, choose Exit from the File menu, or click the main window’s

Close button. A conﬁrmation message appears. Click Yes to quit. Click No to cancel.

If there are no unsaved changes, NetworkAmp Manager quits. If there are unsaved changes,

a dialog box asking if you want to save the changes before quitting appears. Click Yes to save

the changes and quit. Click No to quit without saving the changes.

Caution: Don’t transmit any audio data until all networked devices (ACU16-C, NHB32-C,

and power ampliﬁers) have been turned on, the power ampliﬁer’s REMOTE indicators are

on, and the system has stabilized (about 10 seconds). Doing so may produce loud noises.

Note: If you change any settings on the Windows Display control panel, NetworkAmp Man-

ager’s windows may not display properly. In this case, you should reset the Display control

panel settings to their defaults.

Configuring NetworkAmp Manager 8

NetworkAmp Manager—Owner’s Manual

Conﬁguring NetworkAmp Manager

The General Setup dialog box is used to conﬁgure NetworkAmp Manager. To open the

General Setup dialog box, choose General Setup from the Option menu.

PC I/F for amp control: These options are used to specify the MIDI interface Net-

workAmp Manager should use to communicate with the connected ACU16-C/NHB32-C.

The options available depends on what MIDI drivers you have installed on your PC. Choose

the Yamaha CBX Driver (for use with serial ports) or Yamaha USB Driver (for use with USB

ports). See the ACU16-C/NHB32-C Owner’s Manual for information on installing these

drivers.

Control error caution: When this option is selected, a message is displayed in the Log

window when a parameter is adjusted on another PC or an ACU16-C or NHB32-C.

Default project: These options determine how NetworkAmp Manager behaves when it’s

started. When “None” is selected, the project open dialog box appears automatically and

you can select a project ﬁle manually. When the “Speciﬁed project” option is selected, the

speciﬁed project is opened automatically. Click the Browse button to select the project ﬁle

to be opened automatically. If you enter the ﬁlename manually, be sure to include the full

path (e.g., C:\My Documents\NetworkAmp Manager\My Project.apj).

Temperature display units: These options determine the units NetworkAmp Manager

uses to display temperature values: Centigrade (˚C) or Fahrenheit (˚F).

Output meter units: These options determine the units NetworkAmp Manager uses to

display power ampliﬁer output values: Watt (W) or Volt (V).

The “PC I/F for amp control” and “Default project” settings are stored in the Windows Reg-

istry. All other settings are stored in the project ﬁle.

9 Getting Started

NetworkAmp Manager—Owner’s Manual

Working with Projects

NetworkAmp Manager setups are stored as projects.

Project ﬁles have the ﬁle name extension “.apj”.

•To create a new project, choose New from the File menu.

•To open a previously saved project, choose Open from the File menu.

•To save the current project, choose Save from the File menu.

•To save the current project with a new name, choose Save As as from the File menu.

Only one project can be open at a time. If you create a new project or open a previously

saved project, you’ll be prompted to save any unsaved changes.

Main Window 10

NetworkAmp Manager—Owner’s Manual

3 Touring NetworkAmp Manager

Main Window

This is NetworkAmp Manager’s main window. The left pane displays the CobraNet net-

work tree, consisting of ACU16-Cs, NHB32-Cs, and power amps. The right pane displays

the various NHB and ACU pages. The name and unit ID of the device currently selected in

the network tree are displayed at the top of the right pane. If it’s an ACU16-C, “ACU - name

[Unit ID]” is displayed. If it’s an NHB32-C, “NHB - name [Unit ID]” is displayed. You can

set the device names in NetworkAmp Manager (see page 13). Unit IDs are set on the actual

devices.

11 Touring NetworkAmp Manager

NetworkAmp Manager—Owner’s Manual

Menus

File

Edit

These commands are available only when an editable text ﬁeld is selected, including the

threshold values on the ACU Threshold page (see page 24). These commands also appear

on the pop-up Edit menu that appears when you right-click an editable item. The pop-up

menu also has Undo and Select All commands.

View

Option

Window

Help

New

Creates a new project

Open

Opens an existing project

Save

Saves the current project

Save As

Saves the current project with a new name

Disconnect from Network

Disconnects NetworkAmp Manager from the network

Connect to Network

1. A check mark appears next to either of these commands, indicating the current status. If the con-

nected ACU16-C/NHB32-C is turned off, the check mark appears next to the “DIsconnect from Net-

work” command and a disconnection warning message appears.

Connects NetworkAmp Manager to the network

Connect & send to network

Connects NetworkAmp Manager to the network and sends the

project settings to all devices on the network

Exit

Quits NetworkAmp Manager

Cut

Moves the currently selected item to the clipboard

Copy

Copies the currently selected item to the clipboard

Paste

Pastes the item on the clipboard to the current location

Delete

Deletes the currently selected item

Group View

Displays the Group View page

Control Link

Displays the Control Link page

Log Setup

Opens the Log Setup dialog box

Operation Lock

Opens the Operation Lock dialog box

COM/MIDI Mode

Opens the COM/MIDI Mode dialog box

General Setup

Opens the General Setup dialog box

Factory Reset

Resets the ACU16-C or NHB32-C connected to your PC

Log Window

Opens the Log window

Help

1. If this command is unavailable, select a language from the Help Topics submenu.

Opens this manual (PDF format)

Help Topics

Selects the language, English, Japanese, German, French, or Spanish,

of the NetworkAmp Manager Owner’s Manual

About

Opens the About NetworkAmp Manager window

Network Tree 12

NetworkAmp Manager—Owner’s Manual

Network Tree

The network tree displays all the ACU16-Cs, NHB32-Cs, and

power amps in the project in a tree-like structure. Items are dis-

played in order of unit ID. The tree can be expanded and col-

lapsed by clicking the plus and minus symbols.

The following table lists the items that can appear in the network tree.

Networked devices can be ofﬂine, online, or in COM/MIDI mode, and the current status is

indicated by icon color, as shown in the table above. While NetworkAmp Manager is receiv-

ing data from a device, the corresponding icon ﬂashes.

When the PRJ icon is gray (ofﬂine), no networked devices are being controlled and moni-

tored (i.e., NetworkAmp Manager is disconnected from the network). When it’s green

(online), networked devices are being controlled and monitored (i.e., NetworkAmp Man-

ager is connected to the network). When it’s yellow, COM/MIDI mode is being used.

When an ACU, NHB, AMP, or CH icon is gray (ofﬂine), that device is either not turned on

or not connected. When an icon is green (online), the device is turned on and connected

and can be controlled and monitored. When an icon is yellow, COM/MIDI mode is being

used.

Item

Icon

Label

Parent

node

Maximum

number

Ofﬂine Online

COM/MIDI

mode

PRJ

Project name

—1

ACU

Unit ID + ACU16-C name

PRJ 16

NHB

Unit ID + NHB32-C name

PRJ 8

AMP

Unit ID + amp name

ACU

32 (per

ACU16-C)

Channel name

Amp

8 (per

amp)

13 Touring NetworkAmp Manager

NetworkAmp Manager—Owner’s Manual

PRJ

The PRJ icon always appears at the top of the network tree.

The following menu appears when you right-click the PRJ icon.

Add: Adds an ACU16-C or NHB32-C to the project. When you choose either of these

commands, a dialog box appears for you to specify the device name and unit ID.

Rename: Opens the Rename dialog box so you can rename the project.

ACU

When you click an ACU icon, the ACU pages appear in the main window’s right pane.

The following menu appears when you right-click an ACU icon.

Add: Adds a PCxxxxN series power ampliﬁer to the ACU16-C. When you add an ampli-

ﬁer, a dialog box appears for you to specify the device name, unit ID, and channel mode

(i.e., Parallel, Bridge, or Stereo).

As of this writing, the Yamaha PC9501N/PC6501N/PC4801N/PC3301N/PC2001N/

PC9500N/PC4800N/PC3300N power ampliﬁers can be added to projects. Please check the

Yamaha Professional Audio Web site at the following URL for news and information on net-

workable power ampliﬁers to be released in the future, and for information on other

Yamaha professional audio products: http://www.yamahaproaudio.com/.

Ampliﬁers are deﬁned in the device deﬁnition ﬁle. As and when Yamaha introduce new net-

workable power amps, an updated device deﬁnition ﬁle will be made available.

Delete: Deletes the ACU16-C from the project. A conﬁrmation message appears before

the ACU16-C is deleted.

Rename: Opens the Rename dialog box so you can rename the ACU.

Note:

•You can check the version of a device deﬁnition ﬁle by selecting [About] from the [Help]

menu.

•If you intend to drive the PC3301N power ampliﬁer at a high impedance in Bridge mode,

note the following:

–If the load impedance is 50 Ω or higher (total speaker input is 200W or lower), the imped-

ance indicator will not display the correct value.

–If the load impedance is 500 Ω or higher (total speaker input is 21W or lower), and the

output meter displays the level in watts, the meter will not respond. (If the meter displays

the level in volts, it will display the correct level.)

Network Tree 14

NetworkAmp Manager—Owner’s Manual

NHB

When you click an NHB icon, the NHB pages appear in the main window’s right pane.

The following menu appears when you right-click an NHB icon.

Delete: Deletes the NHB32-C from the project. A conﬁrmation message appears before

the NHB32-C is deleted.

Rename: Opens the Rename dialog box so you can rename the NHB.

AMP

When you click an AMP icon, the ACU Amp pages appear in the main window’s right pane.

The following menu appears when you right-click an AMP icon.

Delete: Deletes the ampliﬁer from the project. A conﬁrmation message appears before the

ampliﬁer is deleted.

Rename: Opens the Rename dialog box so you can rename the ampliﬁer.

When you click a CH icon, the ACU Channel Detail page appears in the main window’s

right pane.

The following menu appears when you right-click a CH icon.

Rename: Opens the Rename dialog box so you can rename the ampliﬁer channel.

15 NHB Pages

NetworkAmp Manager—Owner’s Manual

4 NHB Pages

This chapter explains the NHB pages, which can be selected while an NHB32-C is selected

in the network tree.

Devices on a CobraNet network transmit and receive audio data by matching bundle num-

bers. Matching the bundle number on the transmitting and receiving devices is analogous

to making a physical cable connection between two devices. For example, if the Transmit

bundle assignment (CobraNet Output) on NHB32-C #1 is set to bundle #5, and the Receive

bundle assignment (CobraNet Input) on NHB32-C #2 is also set to bundle #5, audio data

in bundle #5 will be carried from NHB32-C #1 to NHB32-C #2.

CobraNet Page

In this page you can make CobraNet bundle assignments, and specify the audio resolution

and CobraNet network latency for the transmitted bundles.

CobraNet distributes digital audio data in bundles. A single bundle can carry eight channels

of 20-bit/48 kHz digital audio, or seven channels of 24-bit/48 kHz digital audio (with a

latency of 5.33 ms). The NHB32-C supports bundles 0 through 16,383 (multicast and uni-

cast). Bundle 0 is not really a bundle as such, more of a null setting used to disable trans-

mission or reception.

Enable Unicast: If you do not check this check box, you can specify bundle 0 and multi-

cast bundles 1 through 225. If you check this check box, you can specify unicast bundles 256

through 16,383, in addition to bundle 0 and multicast bundles 1 through 225.

Receive bundle assignment: These parameters are used to specify the bundles that

contain the CobraNet channels you want to patch to the NHB32-C’s AES/EBU outputs. You

can patch the individual channels in each bundle on the NHB Patch page (see page 17).

Latency: This parameter is used to specify the latency of audio data distributed from the

NHB32-C to the CobraNet network in msec units. In most cases, select 5.33 ms. You can

also select 2.67 ms or 1.33 ms (low latency). However if you decrease the latency, this will

CobraNet Page 16

NetworkAmp Manager—Owner’s Manual

intensify the restrictions on Ethernet’s packet delivery times, and therefore reduce the max-

imum number of switches that can be used. For details, refer to the Peak Audio website

(http://www.peakaudio.com).

The number of channels assignable per single device:

Transmit bundle assignment: These parameters are used to specify the bundles that

contain the CobraNet channels you want to patch to the NHB32-C’s AES/EBU inputs. You

can patch the individual channels in each bundle on the NHB Patch page (see page 17).

Audio resolution: This option is used to specify the audio resolution for bundle trans-

mission: 20 or 24 bit. Be sure to select 24-bit if you are using 24-bit digital audio. Otherwise,

your audio will be truncated to 20-bit.

Note: If the latency is 1.33 ms, the number of bundles that can be handled by this single device

on a CobraNet network will be limited to a total of four bundles for transmission and reception.

When changing the latency to 1.33 ms from some other setting, you will be unable to make

this change if the total number of bundles for transmission and reception is ﬁve or more.

Latency

20-bit 24-bit

Channels

per bundle

Maximum number of bundles

(total of input and output)

Channels

per bundle

Maximum number of bundles

(total of input and output)

5.33ms 8878

2.67ms 8888

1.33ms 8484

Note: You can change the latency setting only while ofﬂine. In order to apply the setting to the

NHB32-C or ACU16-C, you must execute “Connect & send to network.” It is possible that

noise will occur somewhere in the system when you change the latency. To prevent damage to

speakers or other components, you should turn down the audio to the CobraNet network or

turn down the output of the power amps before making this change.

Note: If two or more latencies exist within a CobraNet network, there is a danger that the

devices may become unable to communicate correctly with each other. You must make the

same latency setting for all devices in a single network.

Note: If you are unable to change the latency, refer to Troubleshooting (see page 38).

Note: Two or more devices cannot transmit data in the same bundle. So do not assign the same

bundle to more than one group.

17 NHB Pages

NetworkAmp Manager—Owner’s Manual

Patch Page

This page is used to assign AES/EBU inputs and outputs to individual CobraNet channels

and to store and recall assignment patches. Before making any assignments, you must spec-

ify the bundles that contain the CobraNet channels you want to patch (see page 15).

AES/EBU inputs and outputs are assigned to CobraNet channels on two 32 x 32 grids, one

for inputs, one for outputs. To make an assignment, click on the grid at the relevant inter-

section. A blue spot appears when an assignment has been made. To cancel an assignment,

click the blue spot.

Only one AES/EBU input or output can be assigned to each CobraNet channel. For example

if you select a latency of 5.22 ms and a bit depth of 24 bits in the NHB CobraNet page (see

page 15), the number of channels in each group will decrease to 7, and channels 8, 16, 24,

and 32 will be unavailable.

Network efﬁciency can be optimized by using all channels in each bundle instead of, for

example, using four channels in two bundles or two channels in four bundles.

EDIT indicator

Word Clock Page 18

NetworkAmp Manager—Owner’s Manual

AES/EBU In to CobraNet: This tab is used to assign AES/EBU inputs to CobraNet

channels.

CobraNet to AES/EBU Out: This tab is used to assign CobraNet channels to AES/EBU

outputs.

Store/Recall: These buttons are used to store and recall patches. A patch consists of all

AES/EBU input and output to CobraNet channel assignments. There are 100 patch mem-

ories. Patch #0 is a read-only memory containing initial assignments, with each AES/EBU

input and output assigned to the correspondingly numbered CobraNet input and output.

For example, AES/EBU input #1 is assigned to CobraNet output #1, AES/EBU input #2 is

assigned to CobraNet output #2, and so on. Up to 99 patches can be stored in patch mem-

ories 1 through 99.

To store a patch, use the Up and Down arrow buttons to select a patch memory from 1 to

99, enter a title, and then click the Store button. The patch is immediately transferred to,

and stored in the NHB32-C, where it is can be recalled directly from the front panel.

To recall a patch, use the Up and Down arrow buttons to select a patch memory from 0 to

99, and then click the Recall button.

When a patch is edited, the “EDIT” indicator appears next to the patch number. It disap-

pears when the patch is stored or another patch is recalled.

Word Clock Page

This page is used to select the NHB32-C’s wordclock source.

Master clock: This indicator shows the wordclock lock status of the NHB32-C: LOCK or

UNLOCK. It works in unison with the LOCK indicator on the NHB32-C’s front panel.

Word clock source select: These options are used to select the NHB32-C’s wordclock

source, which can be a pair of AES/EBU inputs, the CobraNet network, or the NHB32-C’s

BNC WORD CLOCK IN connector. A conﬁrmation message appears when you change the

wordclock source. The wordclock source can also be selected on the NHB32-C’s front panel.

Note: When you change the wordclock settings of your system, some devices may output noise,

so turn down your power amps beforehand, otherwise you may damage your speakers.

19 ACU Pages

NetworkAmp Manager—Owner’s Manual

5 ACU Pages

This chapter explains the ACU pages, which can be selected while an ACU16-C is selected

in the network tree.

Devices on a CobraNet network transmit and receive audio data by matching bundle num-

bers. Matching the bundle number on the transmitting and receiving devices is analogous

to making a physical cable connection between two devices. For example, if the Transmit

bundle assignment (CobraNet Output) on an NHB32-C is set to bundle #4, and the Receive

bundle assignment (CobraNet Input) on an ACU16-C is also set to bundle #4, audio data

in bundle #4 will be carried from the NHB32-C to the ACU16-C.

CobraNet Page

In this page you can make CobraNet bundle assignments and specify the latency of the

CobraNet network.

You can specify which bundles you want the ACU16-C to receive. The ACU16-C supports

bundles 0 through 16,383 (multicast and unicast). Bundle 0 is not really a bundle as such,

more of a null setting used to disable transmission or reception.

Enable Unicast: If you do not check this check box, you can specify bundle 0 and multi-

cast bundles 1 through 225. If you check this check box, you can specify unicast bundles 256

through 16,383, in addition to bundle 0 and multicast bundles 1 through 225.

Receive bundle assignment: These parameters are used to specify the bundles that

contain the CobraNet channels you want to patch to the ACU16-C’s analog outputs. You

can patch the individual channels in each bundle on the ACU Patch page (see page 20).

Latency: This parameter is used to specify the latency of audio data received from the

CobraNet network in ms units. Normally, select 5.33 ms. You can also select 2.67 ms or

1.33 ms (low latency).

The number of bundles that can be assigned per unit is always four bundles, regardless of

the latency setting.

Note: You can change the latency setting only while ofﬂine. In order to apply the setting to the

NHB32-C or ACU16-C, you must execute “Connect & send to network.” It is possible that

noise will occur somewhere in the system when you change the latency. To prevent damage to

speakers or other components, you should turn down the audio to the CobraNet network or

turn down the output of the power amps before making this change.

Patch Page 20

NetworkAmp Manager—Owner’s Manual

Patch Page

This page is used to assign individual CobraNet channels to ACU16-C analog outputs.

Before making any assignments, you must specify the bundles that contain the CobraNet

channels you want to patch (see page 19).

CobraNet channels are assigned to ACU16-C analog outputs on a 16 x 32 grid. To make an

assignment, click on the grid at the relevant intersection. A blue spot appears when an

assignment has been made. To cancel an assignment, click the blue spot.

Only one CobraNet channel can be assigned to each ACU16-C output. The bundle number

assigned to each group of CobraNet channels is displayed along the left side of the grid.

Note: If two or more latencies exist within a CobraNet network, there is a danger that the

devices may become unable to communicate correctly with each other. You must make the

same latency setting for all devices in a single network.

Note: If you are unable to change the latency, refer to Troubleshooting (see page 38).

Stránka se načítá ...

Yamaha Hub Návod k obsluze

Značka: Yamaha

Modelka: Hub

Kategorie: Hudební vybavení

Typ: Návod k obsluze

Tato příručka je také vhodná pro

Stáhnout PDF

zpráva

v jiných jazycích

polski: Yamaha Hub Instrukcja obsługi
español: Yamaha Hub El manual del propietario
italiano: Yamaha Hub Manuale del proprietario
Deutsch: Yamaha Hub Bedienungsanleitung
svenska: Yamaha Hub Bruksanvisning
português: Yamaha Hub Manual do proprietário
français: Yamaha Hub Le manuel du propriétaire
Türkçe: Yamaha Hub El kitabı
English: Yamaha Hub Owner's manual
dansk: Yamaha Hub Brugervejledning
русский: Yamaha Hub Инструкция по применению
suomi: Yamaha Hub Omistajan opas
Nederlands: Yamaha Hub de handleiding
română: Yamaha Hub Manualul proprietarului

Yamaha Hub Návod k obsluze

Tato příručka je také vhodná pro

Yamaha Hub Návod k obsluze

v jiných jazycích

Související papíry

Jiné dokumenty