Yamaha Version2 instalační příručka

Značka: Yamaha

Modelka: Version2

Typ: instalační příručka

Tato příručka je také vhodná pro

TOOLS for n Version2/Cubase AI

EnglishDeutschFrançaisEspañol

English

TOOLS for n Version2/Cubase AI Installation Guide

SPECIAL NOTICES

Caution

•Yamaha makes no representations or warranties with regard to any problems while attempting to copy the disks or software and cannot be

held responsible for the results of attempts to copy the data.

• The software included in the TOOLS for n Version2 CD-ROM and this Installation Guide are the exclusive copyrights of Yamaha

Corporation.

• The software included in the Cubase AI DVD-ROM and the copyrights thereof are under exclusive ownership by Steinberg Media

Technologies GmbH.

Note that Yamaha does not offer technical support for the DAW software in the DVD-ROM.

• Use of the software and this manual is governed by the license agreement which the purchaser fully agrees to upon breaking the

seal of the software packaging. (Please read carefully the Software License Agreement on page 19 of this manual before installing

the software.)

• Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written

consent of the manufacturer.

•Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held

responsible for the results of the use of this manual and the software.

• These disks are NOT for audio/visual purpose. Do not attempt to play the disks on a CD/DVD player. Doing so may result in

irreparable damage to your audio CD/DVD player.

• The software included in the TOOLS for n Version2 CD-ROM may be revised and updated without prior notice. Make sure to check

and download the latest version of the software from the following site.

•For information about the minimum system requirements and latest information of Cubase AI, check the web site below.

• Future upgrades of application and system software and any changes in speciﬁcations and functions will be announced separately.

• The screen displays as illustrated in this manual are for instructional purposes, and may appear somewhat different from the

screens which appear on your computer.

Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except

for your personal use.

• Windows is the registered trademark of Microsoft

Corporation.

• Apple, Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.

• FireWire and the FireWire symbol are trademarks of Apple, Inc., registered in the U.S. and other countries. The FireWire

logo is a trademark of Apple, Inc.

The company names and product names in this Installation Guide are the trademarks or registered trademarks of their

respective companies.

http://www.yamahasynth.com/download/

http://www.yamahasynth.com/

English

About the Disks Included in the Package

TOOLS for n Version2/Cubase AI Installation Guide

The software on these disks is for the Windows and Macintosh operating system. Refer to page 4 (for Windows) or page 5 (for Macintosh) to

install the software.

Before breaking the seal of the disk’s packaging, please read carefully the “Software License Agreement for TOOLS for n Version2” on

page 19 of this guide.

Verify that your system meets the operating requirements of the software. .............page 4

Install Cubase AI. ...............................page 6

Install TOOLS for n Version2. ............page 6

Start up the software.

For subsequent operations, refer to the owner’s manual for the n8/n12 and Cubase AI (online help/PDF manual).

NOTE

·To view PDF ﬁles, you must install Adobe Reader on your computer.

If you do not have Adobe Reader, you can download the application from the Adobe website at the following URL:

Quick solutions/Reference materials

· Changing the driver settings ..........page 14

· Uninstalling or re-installing the driver

Windows XP: .........................page 9

Windows Vista/7: ...................page 11

Macintosh: .............................page 13

· Resolving communication problems with the n8/n12

Refer to the section “Troubleshooting” in the n8/n12 Owner’s Manual.

Table of Contents

About the Disks Included in the Package ................. 3

Operating System (OS) ............................................ 3

CD/DVD-ROM Installation Procedure....................... 3

Disk Contents ........................................................... 4

System Requirements for Software .......................... 4

About the Cubase AI DVD-ROM .............................. 6

Installation ................................................................ 6

About the TOOLS for n Version2 CD-ROM.............. 6

Installation(Windows XP) .......................................... 7

Installation (Windows Vista/7)................................. 10

Installation(Macintosh) ........................................... 12

Changing settings after installation......................... 14

Using multiple devices compatible with Yamaha

Steinberg FW Driver ............................................ 16

Hints for using audio data (Windows) .....................17

Troubleshooting......................................................18

License Agreement for TOOLS for n Version2 .......19

About the Disks Included in the Package

Operating System (OS)

CD/DVD-ROM Installation Procedure

http://www.adobe.com

English

About the Disks Included in the Package

TOOLS for n Version2/Cubase AI Installation Guide

The disks contain the following software and data.

●

TOOLS for n Version2

●

Cubase AI

The system requirements below are necessary for installing software included in the accessory disks (TOOLS for n Version2 and

Cubase AI).

NOTE

· Note that the system requirements may be slightly different from those described below depending on the particular operating system.

· For details on minimum requirements for other DAW software, refer to the respective owner’s manual.

You can check the latest version information of Cubase series and their system requirements at the following website.

·You can check the latest version information of TOOLS for n Version 2 and their system requirements at the following website.

■

Windows

*1 The TOOLS for n Version2 for Windows Vista 64-bit/Windows 7 64-bit can be downloaded from the following address:

*2 The computer must have an IEEE1394 (FireWire/i.LINK) connector. If there is no connector, install an IEEE1394 interface card(PCI or

PC). For more details on system requirements and recommended PCI or PC cards, see the following page:

*3 When using a laptop or notebook computer, a built-in IEEE1394 terminal may not be available. If this is the case, install an

appropriate PC interface card.

IMPORTANT

•A DVD drive is required for installation.

• In order to have continuous use of Cubase AI, including support and other beneﬁts, you will need to register the software and activate your soft-

ware license by starting it while the computer is connected to the Internet.

Disk Contents

Software Name Contents

TOOLS for n Version2

TOOLS for n Version2 consists of two software components: Yamaha Steinberg FW Driver and n Extension. Yamaha Steinberg FW

Driver enables audio/MIDI signals to be transferred between a computer and the n8/n12 via IEEE1394 cables. Up to three devices

compatible with Yamaha Steinberg FW Driver can be used simultaneously. Keep in mind that up to two devices can be connected

when the Sample Rate is set to 88.2 kHz or 96 kHz. Using n Extension, you can link the n8/n12 with Cubase versions such as

Cubase 4.5 and Cubase AI 4.5 that support the Link functions between both of them. The TOOLS for n Version2 Installer installs

these two software components.

Software Name Contents

Cubase AI

Cubase AI is a special version developed for Yamaha products, based on Steinberg Cubase, which is very popular among a wide

range of users.

Cubase AI features an Advanced Integration function that integrates various hardware devices, including the Yamaha n series, and

provides an integrated operational environment.

Cubase AI also features the content data that is carefully selected from the Yamaha MOTIF series, Yamaha’s synthesizer ﬂagship

models.

System Requirements for Software

http://www.steinberg.net/

http://www.yamahasynth.com/

OS :

Windows XP Professional SP3/XP Home Edition SP3/Vista SP1 or later (32-bit (*1))/ Windows 7 (32-bit (*1))

CPU :

Pentium/Athlon 2GHz or more (dual core CPU recommended)

Memory :

1 GB or more

Display Resolution :

1280 x 800 - full color

Interface :

S400 (400 Mbps) IEEE1394 (FireWire) or i.Link connector (*2) (*3)

Hard Disk :

Free disk space of 100MB or more (TOOLS for n Version2), Free disk space of 1GB or more (Cubase AI), high-speed hard disk

http://www.yamahasynth.com/download/

http://www.yamahasynth.com/

English

About the Disks Included in the Package

TOOLS for n Version2/Cubase AI Installation Guide

■

Macintosh

*1 The TOOLS for n Version2 works properly on Mac OS X 10.4 (Mac OS X 10.4.9 or later for Intel-based Macintosh computer).

IMPORTANT

•A DVD drive is required for installation.

• In order to have continuous use of Cubase AI, including support and other beneﬁts, you will need to register the software and activate your soft-

ware license by starting it while the computer is connected to the Internet.

OS :

Mac OS X 10.5.5, 10.6.x (*1)

CPU :

PowerPC G5 (Intel Core Duo CPU recommended)

Memory :

1 GB or more

Display Resolution :

1280 x 800 - full color

Interface :

With a FireWire port

Hard Disk :

Free disk space of 100MB or more (TOOLS for n Version2), Free disk space of 1GB or more (Cubase AI), high-speed hard disk

English

About the Cubase AI DVD-ROM

TOOLS for n Version2/Cubase AI Installation Guide

NOTE

· If you have already installed a version of Cubase compatible with the Link function, such as Cubase 5, the instructions for “Installing Cubase AI” are not

necessary. Jump to the next section “Installing TOOLS for n Version2.”

Start the computer and log on to the Administrator

account.

Insert the Cubase AI DVD-ROM into the DVD-ROM

drive.

Follow the on-screen instructions to install Cubase AI.

NOTE

· In order to have continuous use of Cubase AI, including support and

other beneﬁts, you will need to register the software and to activate

your software license by starting it while the computer is connected

to the Internet. Click the “Register Now” button shown when the soft-

ware is started, then ﬁll in all required ﬁelds for registration. If you do

not register the software, you will be unable to use it after a limited

period of time expires.

CAUTION

•Keep in mind that noise may be generated when installing or uninstalling the TOOLS for n Version2. Before performing either of these opera-

tions, make sure to lower the output level of each device.

TOOLS for n Version2 consists of two software components:

Yamaha Steinberg FW Driver and n Extension. Yamaha Stein-

berg FW Driver enables audio/MIDI signals to be transferred

between a computer and the n8/n12 via IEEE1394 cables. Up

to three devices compatible with Yamaha Steinberg FW Driver

can be used simultaneously. Keep in mind that up to two

devices can be connected when the Sample Rate is set to

88.2 kHz or 96 kHz. Using n Extension, you can link the n8/n12

with Cubase versions such as Cubase 4.5 and Cubase AI 4.5

that support the Link functions between both of them. The

TOOLS for n Version2 Installer installs these two software com-

ponents.

About the Cubase AI DVD-ROM

Installation

About the TOOLS for n Version2 CD-ROM

If using mLAN Driver/mLAN Tools with Windows:

· If you are using mLAN Driver/mLAN Tools V1.6.2, update

them to V1.6.3 (or higher) before installing TOOLS for n

Version2. This is necessary because the Yamaha Stein-

berg FW Driver cannot work properly with the mLAN

Driver/mLAN Tools V1.6.2 installed.

· When using Yamaha Steinberg FW Driver, make sure to

disable the mLAN Driver. If this is enabled (on), Yamaha

Steinberg FW Driver cannot work because the mLAN

Driver uses the IEEE1394 interface.

· When using the mLAN Driver, make sure to turn off any

devices compatible with Yamaha Steinberg FW Driver or

disconnect them from the computer before enabling the

mLAN driver.

· Note that you may not need to disable the mLAN driver

when the computer is equipped with multiple IEEE1394

interfaces and a device compatible with Yamaha Stein-

berg FW driver is connected to the different IEEE1394

interface from the other used by the mLAN driver.

English

About the TOOLS for n Version2 CD-ROM

TOOLS for n Version2/Cubase AI Installation Guide

Preparing to install

Make sure that the power to the n8/n12 is turned off.

Using an IEEE1394 cable, connect the n8/n12 directly

to the computer (without using a hub), and discon-

nect all other IEEE1394 devices from the computer.

Start the computer and log on to the Administrator

account.

Select [Start] (

➝

[Settings])

➝

[Control Panel]. If the

control panel appears as shown below, click “Switch

to Classic View” in the upper left of the window.

All control panels and icons will be displayed.

Go to [System]

➝

[Hardware]

➝

[Driver Signing]

➝

[Driver Signing Options], and select the radio button

to the left of “Ignore - Install the software anyway and

don’t ask for my approval” and click [OK].

NOTE

· After completing the installation, make sure to restore the original

setting if necessary.

Check that no “!” or “x” marks appear next to

“IEEE1394 Bus host controllers” in ([System]

➝

[Hardware]

➝

) [Device Manager].

If one of these marks is shown, the IEEE1394/i.LINK con-

nection cannot be used. Refer to the owner’s manual of

your computer for details.

Close the Device Manager window, System Proper-

ties window and Control Panel by clicking the [OK]

button or the Close button ([X]) of the windows.

Exit any open applications and close all open win-

dows.

Insert the TOOLS for n Version2 CD-ROM into the CD-

ROM drive.

Software Installation

The installer will install the following two software components

to your computer.

· Yamaha Steinberg FW Driver

· n Extension

NOTE

· Use the Cancel button or Close button to quit the installation. Quitting

by using the [Ctrl]+[Alt]+[Delete] buttons or by turning off the power

while installation is in process can result in problems since the instal-

lation is terminated without performing a proper uninstall.

Open the CD-ROM, then double-click the ﬁle

“setup.exe.”

A “Welcome to the InstallShield Wizard for TOOLS for n

Version2” window appears.

Click [Next].

Installation(Windows XP)

English

About the TOOLS for n Version2 CD-ROM

TOOLS for n Version2/Cubase AI Installation Guide

Follow the on-screen instructions in the Setup win-

dow for Yamaha Steinberg FW Driver, n Extension

appearing in order.

NOTE

· If the same version of each software component has already been

installed in your computer, the installation window of the correspond-

ing software will not appear.

· If a message “The software you are installing has not passed Win-

dows Logo Testing” appears, click [Continue Anyway]. You do not

need to abort the installation. If the message does not appear, pro-

ceed to the next step.

When installation is complete, a message indicating

so appears. If restarting of the computer is necessary

following successful completion of the installation,

make sure that the radio button to the left of “Yes, I

want to restart my computer now” is selected, then

click [Finish] to restart the computer. If restarting the

computer is unnecessary, click [Finish] to exit the

installation process.

Initial settings of driver

After you’ve installed TOOLS for n Version2, perform the initial

settings of the driver.

NOTE

·A dialog box may appear asking you whether you wish to connect to

Windows Update. In this case, select the radio button to the left of

“Not at this time,” then click [Next].

The “Found New Hardware Wizard” window appears.

Select the radio button next to “Install the software

automatically [Recommended],” then click [Next].

When installation is complete, a message indicating

so appears.

Click [Finish].

NOTE

· If multiple IEEE1394 interfaces have been installed to the computer,

the wizard appears several times. Exit the wizard each time.

Turn on the power to the n8/n12.

The “Found New Hardware Wizard” window is displayed.

Select the radio button next to “Install the software

automatically [Recommended],” then click [Next].

When installation is complete, a message indicating

so appears.

Click [Finish].

The “Found New Hardware Wizard” window appears.

Select the radio button next to “Install the software

automatically [Recommended],” then click [Next].

When installation is complete, a message indicating

so appears.

Click [Finish].

The “Found New Hardware Wizard” window appears.

Select the radio button next to “Install the software

automatically [Recommended],” then click [Next].

22 When installation is complete, a message indicating

so appears.

Click [Finish].

The n8/n12 [COMP] indicator will ﬂash sequentially, then

will stop when the initial settings have been completed.

NOTE

· When a new IEEE1394 interface is installed to the computer or the

other devices compatible with Yamaha Steinberg FW Driver is con-

nected to the computer, the “Found New Hardware Wizard” window

will appear. In that case, ﬁnish the wizard in the same way as

described here.

When canceling the installation:

If you’ve cancelled an installation before it is complete, the

software may not have been installed properly. To install the

software properly, resume the procedure from Step 10.

Bus driver initial settings

Initial Settings of n series FW Driver

WDM MIDI driver initial settings

WDM Audio driver initial settings

English

About the TOOLS for n Version2 CD-ROM

TOOLS for n Version2/Cubase AI Installation Guide

Conﬁrming the installation

1 Select [Control Panel] from the Start menu.

2 Double-click on the System icon to call up the Sys-

tem Properties window.

3 Select the Hardware tab and click [Device Manager].

4 Click on the [+] mark next to “Sound, video and game

controllers,” and conﬁrm that “Yamaha n series FW,”

“Yamaha Steinberg FW Bus,” “Yamaha Steinberg FW

WDM Audio” and “Yamaha Steinberg FW WDM MIDI”

are listed.

Uninstalling the Software

To uninstall TOOLS for n Version2, you must remove the follow-

ing two software components:

· Yamaha Steinberg FW Driver

· n Extension

1 Make sure the POWER switch on the n8/n12 is set to

OFF, exit from any open applications and close all

open windows.

2 From the Start menu, select ([Settings] ➝) [Control

Panel] ➝ [Add or Remove Programs] to display the

Add or Remove Programs panel.

3 Click “Change or Remove Programs” located in the

upper left, then select “Yamaha Steinberg FW Driver,”

“Yamaha n Extension” from the list in the right panel.

4 To uninstall the software, click [Change or Remove] /

[Remove].

Follow the instructions to remove the software.

English

About the TOOLS for n Version2 CD-ROM

TOOLS for n Version2/Cubase AI Installation Guide

Preparing to install

1 Make sure that the power to the n8/n12 is turned off.

2 Using an IEEE1394 cable, connect the n8/n12 directly

to the computer (without using a hub), and discon-

nect all other IEEE1394 devices from the computer.

3 Start the computer and log on to the Administrator

account.

4 Select [Start] ➝ [Control Panel].

5 Click the "Hardware and Sound" ➝ "Device Man-

ager."

NOTE

· If the “User Account Control” window appears, click [Continue]. A

dialog box appears.

6 Check that no “!” or “x” marks appear next to

“IEEE1394 Bus host controllers.”

If one of these marks is shown, the IEEE1394/i.LINK con-

nection cannot be used. Refer to the owner’s manual of

your computer for details.

7 Click the Close button ([x]) at the top right of the

Device Manager window, then click the Close button

([x]) at the top right of the Control Panel window to

close it.

8 Exit any open applications and close all open win-

dows.

9 Insert the TOOLS for n Version2 CD-ROM into the CD-

ROM drive of your computer.

Software Installation

The installer will install the following two software components

to your computer.

· Yamaha Steinberg FW Driver

· n Extension

NOTE

· Use the Cancel button or Close button to quit the installation. Quitting

by using the [Ctrl]+[Alt]+[Delete] buttons or by turning off the power

while installation is in process can result in problems since the instal-

lation is terminated without performing a proper uninstall.

10 Open the CD-ROM then double-click the ﬁle

“setup.exe.”

A “Welcome to the InstallShield Wizard for TOOLS for n

Version2” window appears.

NOTE

· If the “User Account Control” window appears, click [Continue]. A

dialog box appears.

11 Click [Next].

12 Follow the on-screen instructions in the Setup win-

dow for Yamaha Steinberg FW Driver, n Extension

appearing in order.

NOTE

· If the same version of each software component has already been

installed in your computer, the installation window of the correspond-

ing software will not appear.

· If the “Windows Security” window appears, conﬁrm that the publisher

is “YAMAHA CORPORATION,” then click [Install].

Installation (Windows Vista/7)

English

About the TOOLS for n Version2 CD-ROM

TOOLS for n Version2/Cubase AI Installation Guide

13 When installation is complete, a message indicating

so appears. If restarting of the computer is necessary

following successful completion of the installation,

make sure that the radio button to the left of “Yes, I

want to restart my computer now” is selected, then

click [Finish] to restart the computer. If restarting the

computer is unnecessary, click [Finish] to exit the

installation process.

Initial settings of driver

After you’ve installed TOOLS for n Version2, perform the initial

settings of the driver.

NOTE

· If the “User Account Control” window appears, click [Continue].

14 Turn on the power to the n8/n12.

The n8/n12 [COMP] indicator will ﬂash sequentially, then

will stop when the initial settings have been completed.

NOTE

· If the n8/n12 [COMP] indicator does not light even if you wait for a

while, restart the computer.

· If the “User Account Control” window appears when you install a new

IEEE1394 interface to the computer, click [Continue].

Conﬁrming the installation

1 Select [Control Panel] from the Start menu.

2 Click the "Hardware and Sound" ➝ "Device Man-

ager."

NOTE

· If the “User Account Control” window appears, click [Continue]. A

dialog box appears.

3 Click on the [+] mark next to “Sound, Video and game

controllers” and conﬁrm that “Yamaha n series FW,”

“Yamaha Steinberg FW Bus,” “Yamaha Steinberg FW

WDM Audio” and “Yamaha Steinberg FW WDM MIDI”

are listed.

Uninstalling the Software

To uninstall TOOLS for n Version2, you must remove the follow-

ing two software components:

· Yamaha Steinberg FW Driver

· n Extension

1 Make sure that the power to the n8/n12 is turned off.

Exit any open applications and close all open win-

dows.

2 From the Start menu, select [Control Panel] ➝ [Unin-

stall a Program] to display the Uninstall or change a

program panel.

3 Select “Yamaha Steinberg FW Driver,” “Yamaha n

Extension” from the list.

4 To uninstall the software, click [Uninstall]/[Uninstall/

Change].

If the “User Account Control” window appears, click

[Continue]. A dialog box appears. Follow the instructions

to remove the software.

When canceling the installation

If you’ve cancelled an installation before it is complete, the

software may not have been installed properly. To install the

software properly, resume the procedure from Step 10.

English

About the TOOLS for n Version2 CD-ROM

TOOLS for n Version2/Cubase AI Installation Guide

Preparing to install

1 Make sure that the power to the n8/n12 is turned off.

2 Using an IEEE1394 (Firewire) cable, connect the n8/

n12 directly to the computer (without using a hub),

and disconnect all other IEEE1394 devices from the

computer.

3 Start the computer and log in to the Administrator

account.

4 Exit any open applications and close all open win-

dows.

5 Insert the TOOLS for n Version2 CD-ROM into the CD-

ROM drive of your computer.

Software Installation

6 Open the CD-ROM, then double-click the ﬁle “TOOLS

for n V2.mpkg.”

7 A dialog box appears asking if you want to install the

software. Click [Continue].

The “Welcome to the TOOLS for n Version2 Installer” win-

dow appears.

8 Click [Continue].

The “Select Destination” window appears.

NOTE

· Only the boot disk can be selected for the installer.

· If you are using Mac OS X 10.5/10.6, click [Continue] to call up the

“Installation Type” window.

9 Click [Continue].

The “Installation Type” window appears.

10 Click [Install].

The “Authenticate” window appears.

NOTE

· If an older version of the Yamaha Steinberg FW Driver has already

been installed in your computer, [Update] may appear instead of

[Install].

11 Enter the Administrator name and the password, then

click [OK].

A message appears prompting you to restart the com-

puter after the installation.

12 Click [Continue Installation].

The “Install” window appears indicating the installation

progress. When the installation is complete, the the “Fin-

ish Up” window or “Summary” window appears.

NOTE

· Installation cannot be canceled after clicking [Continue Installation].

13 Click [Restart] to restart the computer.

14 Turn on the power to the n8/n12.

The n8/n12 [COMP] indicator will ﬂash sequentially, and

then will stop when the initial settings have been com-

pleted.

NOTE

· If the n8/n12 [COMP] indicator does not light even if you wait for a

while, restart the computer.

Conﬁrming the installation

1 From the hard disk to which the OS is installed (usu-

ally Macintosh HD), click [Applications] ➝ [Utilities],

then double-click [Audio MIDI Setup].

The “Audio MIDI Setup” window appears.

2 Click [Audio Devices], then select “Yamaha Steinberg

FW” from the pull-down menu in [Properties For].

The current audio settings are shown in the [Audio Input]

and [Audio Output] ﬁelds.

NOTE

· By selecting “Yamaha Steinberg FW” for [Default Output] in System

Settings, you can output audio signals of the audio player software

(e.g., iTunes, etc.) from the n8/n12.

Installation(Macintosh)

When canceling the installation

If you’ve cancelled an installation before it is complete, the

software may not have been installed properly. To install the

software properly, resume the procedure from Step 6.

Mac OS X 10.4/10.5

English

About the TOOLS for n Version2 CD-ROM

TOOLS for n Version2/Cubase AI Installation Guide

1 From the hard disk to which the OS is installed (usu-

ally Macintosh HD), click[Applications] ➝ [Utilities],

then double-click [Audio MIDI Setup].

The “Audio Devices” window appears.

2 Select “Yamaha Steinberg FW” from the list of audio

devices.

The current audio settings are shown in the right side of

the window.

NOTE

· By selecting “using this devices for sound output” in the Action menu

at the left bottom of the window, you can output audio signals of the

audio player software (e.g., iTunes, etc.) from the n8/n12.

Uninstalling the Software

To uninstall TOOLS for n Version2, you must remove the follow-

ing two software components:

· Yamaha Steinberg FW Driver

· n Extension

Remove the following folders and ﬁles from the boot disk (usu-

ally Macintosh HD).

/Applications/Yamaha/FWDriver/

Yamaha Steinberg FW Control Panel.app

YamahaFWCM.app

/Library/Application Support/Yamaha/FWDriver/HAL/

YamahaFWHAL.bundle

/Library/Audio/MIDI Devices/Yamaha/Images/

FW_10000D.tiff

FW_10000E.tiff

FW_110006.tiff

FW_110007.tiff

FW_110008.tiff

FW_110009.tiff

/Library/Audio/MIDI Drivers/

YamahaFWMIDI.plugin

/Library/LaunchAgents/

com.yamaha.YamahaFWCM.plist

/Library/PreferencePanes/

Yamaha Steinberg FW.prefPane

/Library/Preferences/

com.yamaha.FWDriver.plist

/Library/Receipts/

YamahaFWAudioDriver.pkg

YamahaFWCM.pkg

YamahaFWCP.pkg

YamahaFWDriverplist.pkg

YamahaFWEnabler.pkg

YamahaFWHAL.pkg

YamahaFWMIDIIcon.pkg

YamahaFWMIDIPlugIn.pkg

/System/Library/Extensions/

YamahaFWAudioDriver.kext

/System/Library/Frameworks/

YamahaFWEnabler.framework

/User/{Account name}/Library/Preference/

com.yamaha.YamahaFWCM.plist

* “{Account name}” indicates the account name when Yamaha Stein-

berg FW Driver is installed.

Remove the following folders and ﬁles from the boot disk

(usually Macintosh HD).

/ Library/Application Support/Steinberg/Components/

yamaha_n.bundle

yamaha_n_u.bundle

/ Library/Application Support/Steinberg/Project Template/

Yamaha n8 multi channel recording.cpr

Yamaha n8 stereo channel recording.cpr

Yamaha n12 multi channel recording (5.1).cpr

Yamaha n12 multi channel recording.cpr

Yamaha n12 stereo channel recording (5.1).cpr

Yamaha n12 stereo channel recording.cpr

This completes the uninstallation of TOOLS for n Version2.

Mac OS X 10.6

Removing Yamaha Steinberg FW Driver

Removing n Extension

English

Changing settings after installation

TOOLS for n Version2/Cubase AI Installation Guide

This Control Panel window lets you set basic n8/n12 parameters when using Yamaha Steinberg FW Driver. The Control Panel consists of the

General window, n8/n12 window and About window which lets you set the parameters such as sampling rate and WORD CLOCK Sour ce.

The settings here are immediately applied to the n8/n12.

■ How to call up the Control Panel window

Windows:

·From the Device ﬁled on the Device Setup window (called up via [Device] ➝ [Device Setup...]) of Cubase, select “Yamaha Steinberg

FW ASIO” then select “Control Panel.”

· Double-click the driver icon indicated on the Taskbar Notiﬁcation area, or right-click the icon, then select “Control Panel.”

· Select [Start] ➝ [Control Panel] ➝ [Hardware and Sound] ➝ [Yamaha Steinberg FW Driver].

Macintosh:

· Select [System Preference...] ➝ [Yamaha Steinberg FW]

· (Mac OS X 10.4/10.5) Select the Application folder ➝ Utility folder ➝ Audio MIDI Setup ➝ Set “Properties” to “Yamaha Steinberg FW”,

then click [Conﬁgure Device]

· (Mac OS X 10.6) Select Application folder ➝ Utility folder ➝ Audio MIDI Setup ➝ Select “Yamaha Steinberg FW” in the “Audio

Devices” window. Click Action menu at the left bottom of the window, then select [Conﬁgure device...].

· When using Cubase series Version 4.5 or later, from the Device ﬁeld on the Device Setup window (called up via [Device] ➝ [Device

Setup...]) of Cubase, select “Yamaha Steinberg FW” then click “Control Panel” ➝ click [Open Conﬁg App] button in the “CoreAudio

Device Settings” window.

NOTE

· The explanations below use Windows are an example, but the basic operation is the same for both Windows and Macintosh.

■ Parameter functions

Overall

1 Tab

Calls up the corresponding window.

To close the Control Panel window, click the “X” at the top right

corner of the window on Windows, or click the “X” at the top left

corner of the window on Macintosh.

NOTE

· When two or three devices compatible with Yamaha Steinberg FW

Driver are connected in daisy-chain fashion, the corresponding tabs

are indicated for each device. When the same two or three devices

are connected, the corresponding tabs are indicated with numbers

assigned to each device. For details, refer to page 16.

General window

1 Sample Rate

Speciﬁes the sample rate of the n8/n12 from 44.1 kHz, 48 kHz,

88.2 kHz and 96 kHz.

2 WORD CLOCK Master

Selects the master device of the Word Clock. This parameter is

available only when two or three devices compatible with

Yamaha Steinberg FW Driver are connected in daisy-chain

fashion.

3 Clock Source

Selects the word clock source of the device selected in the

WORD CLOCK Master. For the n8/n12, only “Internal” can be

selected.

Changing settings after installation

Driver icon

English

Changing settings after installation

TOOLS for n Version2/Cubase AI Installation Guide

4 ASIO Buffer Size (Windows only)

Determines the buffer size for the ASIO driver.

5 Input Latency/Output Latency (Windows only)

Indicates the delay time for the audio input/output in millisec-

ond units. Audio latency differs depending on the value of the

ASIO Buffer Size. The lower the value of the ASIO Buffer Size,

the lower the value of Audio Latency.

6 Enable MMCSS (Windows Vista/7 only)

Determines whether the MMCSS (Multimedia Class Scheduler

Service) is active or not on Windows Vista/7. If you place a

checkmark in the checkbox, MMCSS will be enabled and

driver performance will be improved.

7 Audio Routing (Windows only)

Click this to call up the WDM Audio Routing window. From this

window, you can determine the input/output jack used for the

WDM Audio driver. In each section, the upper box selects the

device (only when two or three devices compatible with

Yamaha Steinberg FW Driver are connected in daisy-chain

fashion) and the lower box selects the input or output jacks.

NOTE

· The device name of the WDM Audio driver is “Yamaha Steinberg FW

WDM Audio.” This parameter speciﬁes which jacks accept the input

signals sent to a computer and to which jacks the output signals from

the computer are sent. The input channels are stereo channels. The

output channels are six consecutive channels from the stereo chan-

nels set in the output port setting.

· When using the Surround Monitoring, set “Monitor L/R” for the output

port setting.

8 Place Icon In the taskbar (Windows only)

When this checkmark is entered, the driver icon is indicated on

the Taskbar Notiﬁcation area.

9 Reset Device Number

Clicking this resets the indication order of the devices on the

DAW software. For details, refer to page 16. This operation is

only effective when two or more devices compatible with

Yamaha Steinberg FW Driver are connected in daisy-chain

fashion.

n8/n12 window

1 Firmware Version

Indicates the ﬁrmware version of the IEEE1394. Clicking

[Check for Updates] will call up the website from which you

can download the latest ﬁrmware program.

2 Identify

Clicking this will cause the CUBASE READY indicator on the

currently controlled n8/n12 to ﬂash. This operation lets you

conﬁrm which device is actually controlled from a computer

when two or more devices are daisy-chain connected.

About window

This window indicates the version of the Yamaha Steinberg FW

Driver.

Word Clock

In a typical digital audio system, the signal referred to as

“word clock” is used to synchronize the process timing of

audio signals between multiple devices. If the word clock is

not transferred correctly, click noise may occur or recording

may not be successful. Normally, one device transmits a

reference word clock signal, and the other devices receive

this word clock signal and synchronize to it. The transmit-

ting device is called the “word clock master” and the

receiving devices are called “word clock slaves”. Some

devices compatible with Yamaha Steinberg FW Driver can

function as the word clock slave. Select the word clock

source of the word clock signal in the Clock Source param-

eter.

Setting the audio driver buffer size

Noise produced when using applications such as DAW

software can affect audio recording and/or playback. In

most cases, you can solve these problems by adjusting the

audio buffer size (Audio Buffer Size). The buffer size can

usually be adjusted via the audio driver setup window in the

application. (When using ASIO compatible software for

Windows, the buffer size can be adjusted in the ASIO Buffer

Size parameter via the Control Panel of the Yamaha Stein-

berg FW Driver.) While the higher buffer size reduces load

to the computer CPU but produces latency (time lag) dur-

ing recording/playback, the smaller buffer size may result in

noise or the sound cutting off. Make sure to set the buffer

size to an appropriate value depending on the performance

of your computer, the number of audio/MIDI tracks being

recorded/played back on the DAW software, the number of

plug-in software, and so on.

English

Using multiple devices compatible with Yamaha Steinberg FW Driver

TOOLS for n Version2/Cubase AI Installation Guide

Up to three devices compatible with Yamaha Steinberg FW Driver

can be used simultaneously. By connecting them in daisy-chain

fashion to a computer via IEEE1394 cables, you can upgrade your

music production system simply by adding other devices.

NOTE

· Keep in mind that up to two devices can be connected when the

Sample Rate is set to 88.2 kHz or 96 kHz. Even if you connect an

additional third device, the last recognized device (other than the

device speciﬁed as the Word Clock master) connected to the com-

puter will not be available.

· Even if multiple IEEE1394 interfaces are installed on the computer,

make sure to daisy-chain connect all devices to the jacks of a single

interface. This is necessary since the computer can only recognize

devices connected to a speciﬁc, single IEEE1394 interface jack, and

cannot recognize devices connected to different jacks of different

IEEE1394 interfaces even though they are installed on the same

computer.

When connecting two or three devices compatible with Yamaha

Steinberg FW Driver to a computer, the order of devices displayed

in the DAW (Cubase etc.) will be maintained even if the power is

turned off. The order of devices will be reproduced when turning

on the power of the connected devices. When the same two or

three devices are connected, a unique number (indicated at the

end of the device name) is automatically assigned to each of the

devices, in the order with which the devices are connected. The

number once assigned to a device will be maintained even if it is

disconnected or the power is turned off. If you want to reset the

order of devices displayed in DAW or the number assignment, fol-

low the instructions below.

1 Turn off the power of all the connected devices com-

patible with Yamaha Steinberg FW Driver then discon-

nect all the IEEE1394 cables.

2 Call up the Control Panel of the Yamaha FW Driver

window then click the [General] tab.

3 Click the [Reset Device Number] button at the bottom

right corner of this window.

NOTE

· The [Reset Device Number] button is available only when all the con-

nected devices are turned off. When any device is turned on, this

button is dimmed and cannot be clicked.

4 Daisy-chain connect two or three devices compatible

with Yamaha Steinberg FW Driver to the computer in

the desired order.

5 Turn on the power of the ﬁrst device connected

directly to the computer.

Wait until the tab corresponding to the ﬁrst device

appears on the Control Panel of the Yamaha FW Driver

window, indicating that the computer has actually recog-

nized the ﬁrst device.

6 Turn on the power of the second device that is daisy-

chain connected to the ﬁrst device.

The tab corresponding to the second device appears on

the Control Panel of the Yamaha FW Driver window, indi-

cating that the computer has recognized the second

device. If a third device has been connected to this sec-

ond device, turn the power on in the same manner. As

necessary, set the Word Clock Master to the desired

device.

Using multiple devices compatible with Yamaha Steinberg FW Driver

IEEE1394 terminal

n8/n12

MOTIF XS series

MOTIF-RACK XS

English

Hints for using audio data (Windows)

TOOLS for n Version2/Cubase AI Installation Guide

For optimum use of the audio functions, we recommend you make the following settings. These settings minimize possible audio problems,

such as drop outs, glitches and noise.

● Set the DMA mode (high-speed transfer mode) of the

hard disk to on

Windows 7

Select [Control Panel] ➝ [Hardware and Sound] ➝ [Device

Manager] ➝ “IDE ATA/ATAPI controllers,” then double -click

“ATA Channel 0” and open [Advanced Settings]. Check

(enable) “Enable DMA” in the “Device Properties” section.

Windows Vista

Select [Control Panel] ➝ [Device Manager] (➝ [Continue] in

the “User Account Control” window) ➝ “IDE ATA/ATAPI control-

lers”, then double-click “ATA Channel 0” and open [Advanced

Settings]. Check (enable) “Enable DMA” in the “Device Proper-

ties” section.

Windows XP

Select [Control Panel] ➝ [System] ➝ [Hardware] ➝ [Device

Manager] ➝ “IDE ATA/ATAPI controllers”, then double-click

“Primary IDE Channel” and “Secondary IDE Channel”, open

[Advanced Settings]. Set “Transfer Mode” in the “Device” sec-

tion to “DMA if available.”

● Set Processor Scheduling to “Background services”

Windows 7

Select [Control Panel] ➝ [System and Security] ➝ [System] ➝

[Advanced system settings] in the upper left of the window ➝

[Advanced] ➝ [Settings] in the Performance section ➝

[Advanced] and select the radio button to the left of “Back-

ground services” in the “Processor scheduling” section.

Windows Vista

Select [Control Panel] ➝ [System] ➝ [Advanced system set-

tings] in the upper left of the window (➝ [Continue] in the “User

Account Control” window) ➝ [Advanced] ➝[Settings] in the

“Performance” section ➝ [Advanced] and select the radio but-

ton to the left of “Background services” in the “Processor

scheduling” section.

Windows XP

Select [Control Panel] ➝ [System] ➝ [Advanced] ➝ [Settings]

in the “Performance” section ➝ [Advanced] and select the

radio button to the left of “Background services” in the “Pro-

cessor scheduling” section.

● Set the Visual Effects options to “best performance”

Windows 7

Select [Control Panel] ➝ [System and Security] ➝ [System] ➝

[Advanced system settings] in the upper left of the window ➝

[Advanced] ➝ [Settings] in the “Performance” section ➝

[Visual Effects] and select the radio button to the left of “Adjust

for best performance.”

Windows Vista

Select [Control Panel] ➝ [System] ➝ [Advanced system set-

tings] in the upper left of the window (➝ [Continue] in the “User

Account Control” window) ➝ [Advanced] ➝[Settings] in the

“Performance” section ➝ [Visual Effects] and select the radio

button to the left of “Adjust for best performance.”

Windows XP

Select [Control Panel] ➝ [System] ➝ [Advanced] ➝ [Settings]

in the “Performance” section ➝ [Visual Effects] and select the

radio button to the left of “Adjust for best performance.”

● Set Remote Assistance to off

Windows 7

Select [Control Panel] ➝ [System and Security] ➝ [System] ➝

[Remote settings] in the upper left of the window ➝ [Remote]

and uncheck “Allow Remote Assistance connections....”

Windows Vista

Select [Control Panel] ➝ [System] ➝ [Remote settings] in the

upper left of the window (➝ [Continue] in the “User Account

Control” window) ➝ [Remote] and uncheck “Allow Remote

Assistance connections....”

Windows XP

Select [Control Panel] ➝ [System] ➝ [Remote] and uncheck

“Allow Remote Assistance invitations....”

● Enable the Classic Start menu

Windows Vista/XP

Right-click on an empty space on the task bar and select

[Properties] ➝ [Start Menu], then select the radio button to the

left of “Classic Start menu.”

● Disable transition effects

Windows 7

Select [Control Panel] ➝ [Ease of Access] ➝ [Ease of Access

Center] ➝ “Mace it easier to focus on tasks,” then check

(enable) “Turn off all unnecessary animations (when possible)”

in the “Adjust time limits and ﬂashing visuals” section.

Windows Vista

Select [Control Panel] ➝ [Ease of Access Center] ➝ “Make it

easier to focus on tasks”, then check (enable)

“Turn off all unnecessary animations (when possible)” in the

“Adjust time limits and ﬂashing visuals” section.

Windows XP

Select [Control Panel] ➝ [Display] ➝ [Appearance] ➝

[Effects...], and un-check (disable) “Use the following

transition effect for menus and tooltips.”

● Disable SpeedStep

Refer to “Troubleshooting” in the n8/n12 Owner’s Manual.

● Disconnect your computer from the Internet

Select [Control Panel] ➝ [Network and Sharing Center]/[Man-

age network connections] and right-click “Disable.”

Hints for using audio data (Windows)

English

Troubleshooting

TOOLS for n Version2/Cubase AI Installation Guide

■ If an error message appears

Refer to “Error Messages” in the n8/n12 Owner’s Manual.

■ No sound, incorrect sound

Refer to “Troubleshooting” in the n8/n12 Owner’s Manual.

Troubleshooting

Information for Users on Collection and Disposal of Old Equipment

This symbol on the products, packaging, and/or accompanying documents means that used electrical and

electronic products should not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take them to applicable collection

points, in accordance with your national legislation and the Directives 2002/96/EC.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential

negative effects on human health and the environment which could otherwise arise from inappropriate

waste handling.

For more information about collection and recycling of old products, please contact your local municipality,

your waste disposal service or the point of sale where you purchased the items.

[For business users in the European Union]

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further

information.

[Information on Disposal in other Countries outside the European Union]

This symbol is only valid in the European Union. If you wish to discard these items, please contact your local

authorities or dealer and ask for the correct method of disposal.

English

License Agreement for TOOLS for n Version2

TOOLS for n Version2/Cubase AI Installation Guide

ATTENTION

SOFTWARE LICENSE AGREEMENT

PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY PERMITTED TO

USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS BETWEEN YOU (AS AN INDIVIDUAL OR

LEGAL ENTITY) AND YAMAHA CORPORATION (“YAMAHA”).

BY DOWNLOADING, INSTALLING, COPYING, OR OTHERWISE USING THIS SOFTWARE YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS

LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO NOT DOWNLOAD, INSTALL, COPY, OR OTHERWISE USE THIS SOFTWARE. IF YOU HAVE DOWN-

LOADED OR INSTALLED THE SOFTWARE AND DO NOT AGREE TO THE TERMS, PROMPTLY DELETE THE SOFTWARE.

1. GRANT OF LICENSE AND COPYRIGHT

Yamaha hereby grants you the right to use one copy of the software program(s)

and data (“SOFTWARE”) accompanying this Agreement. The term SOFTWARE

shall encompass any updates to the accompanying software and data. The

SOFTWARE is owned by Yamaha and/or Yamaha’s licensor(s), and is protected

by relevant copyright laws and all applicable treaty provisions. While you are

entitled to claim ownership of the data created with the use of SOFTWARE, the

SOFTWARE will continue to be protected under relevant copyrights.

·You may use the SOFTWARE on a single computer.

·You may make one copy of the SOFTWARE in machine-readable form for

backup purposes only, if the SOFTWARE is on media where such backup

copy is permitted. On the backup copy, you must reproduce Yamaha’s copy-

right notice and any other proprietary legends that were on the original copy

of the SOFTWARE.

·You may permanently transfer to a third party all your rights in the SOFT-

WARE, provided that you do not retain any copies and the recipient reads

and agrees to the terms of this Agreement.

2. RESTRICTIONS

·You may not engage in reverse engineering, disassembly, decompilation or

otherwise deriving a source code form of the SOFTWARE by any method

whatsoever.

·You may not reproduce, modify, change, rent, lease, or distribute the SOFT-

WARE in whole or in part, or create derivative works of the SOFTWARE.

·You may not electronically transmit the SOFTWARE from one computer to

another or share the SOFTWARE in a network with other computers.

·You may not use the SOFTWARE to distribute illegal data or data that violates

public policy.

·You may not initiate services based on the use of the SOFTWARE without

permission by Yamaha Corporation.

Copyrighted data, including but not limited to MIDI data for songs, obtained

by means of the SOFTWARE, are subject to the following restrictions which

you must observe.

· Data received by means of the SOFTWARE may not be used for any com-

mercial purposes without permission of the copyright owner.

· Data received by means of the SOFTWARE may not be duplicated, trans-

ferred, or distributed, or played back or performed for listeners in public

without permission of the copyright owner.

· The encryption of data received by means of the SOFTWARE may not be

removed nor may the electronic watermark be modiﬁed without permission

of the copyright owner.

3. TERMINATION

This Agreement becomes effective on the day that you receive the SOFTWARE

and remains effective until terminated. If any copyright law or provisions of this

Agreement is violated, the Agreement shall terminate automatically and imme-

diately without notice from Yamaha. Upon such termination, you must immedi-

ately destroy the licensed SOFTWARE, any accompanying written documents

and all copies thereof.

4. DISCLAIMER OF WARRANTY ON SOFTWARE

You expressly acknowledge and agree that use of the SOFTWARE is at your

sole risk. The SOFTWARE and related documentation are provided “AS IS” and

without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION

OF THIS AGREEMENT, YAMAHA EXPRESSLY DISCLAIMS ALL WARRANTIES

AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIM-

ITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY

RIGHTS. SPECIFICALLY, BUT WITHOUT LIMITING THE FOREGOING,

YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR

REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNIN-

TERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL

BE CORRECTED.

5. LIMITATION OF LIABILITY

YAMAHA’S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF

THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT SHALL YAMAHA

BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUD-

ING, WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL OR CON-

SEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER

DAMAGES ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THE

SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. In no event shall

Yamaha’s total liability to you for all damages, losses and causes of action

(whether in contract, tort or otherwise) exceed the amount paid for the SOFT-

WARE.

6. THIRD PARTY SOFTWARE

Third party software and data (“THIRD PARTY SOFTWARE”) may be attached

to the SOFTWARE. If, in the written materials or the electronic data accompany-

ing the Software, Yamaha identiﬁes any software and data as THIRD PARTY

SOFTWARE, you acknowledge and agree that you must abide by the provi-

sions of any Agreement provided with the THIRD PARTY SOFTWARE and that

the party providing the THIRD PARTY SOFTWARE is responsible for any war-

ranty or liability related to or arising from the THIRD PARTY SOFTWARE.

Yamaha is not responsible in any way for the THIRD PARTY SOFTWARE or your

use thereof.

·Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE.

IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL IMPLIED WARRAN-

TIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, as to

the THIRD PARTY SOFTWARE.

·Yamaha shall not provide you with any service or maintenance as to the

THIRD PARTY SOFTWARE.

·Yamaha is not liable to you or any other person for any damages, including,

without limitation, any direct, indirect, incidental or consequential damages,

expenses, lost proﬁts, lost data or other damages arising out of the use, mis-

use or inability to use the THIRD PARTY SOFTWARE.

7. GENERAL

This Agreement shall be interpreted according to and governed by Japanese

law without reference to principles of conﬂict of laws. Any dispute or procedure

shall be heard before the Tokyo District Court in Japan. If for any reason a court

of competent jurisdiction ﬁnds any portion of this Agreement to be unenforce-

able, the remainder of this Agreement shall continue in full force and effect.

8. COMPLETE AGREEMENT

This Agreement constitutes the entire agreement between the parties with

respect to use of the SOFTWARE and any accompanying written materials and

supersedes all prior or contemporaneous understandings or agr eements, writ-

ten or oral, regarding the subject matter of this Agreement. No amendment or

revision of this Agreement will be binding unless in writing and signed by a fully

authorized representative of Yamaha.

License Agreement for TOOLS for n Version2

U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation

WU25300 911AP***.*-01B0

Yamaha Version2 instalační příručka

Značka: Yamaha

Modelka: Version2

Typ: instalační příručka

Tato příručka je také vhodná pro

Stáhnout PDF

zpráva

v jiných jazycích

polski: Yamaha Version2 Instrukcja instalacji
español: Yamaha Version2 Guía de instalación
italiano: Yamaha Version2 Guida d'installazione
Deutsch: Yamaha Version2 Installationsanleitung
svenska: Yamaha Version2 Installationsguide
português: Yamaha Version2 Guia de instalação
français: Yamaha Version2 Guide d'installation
Türkçe: Yamaha Version2 Yükleme Rehberi
English: Yamaha Version2 Installation guide
dansk: Yamaha Version2 Installationsvejledning
русский: Yamaha Version2 Инструкция по установке
suomi: Yamaha Version2 Asennusohje
Nederlands: Yamaha Version2 Installatie gids
română: Yamaha Version2 Ghid de instalare

Yamaha Version2 instalační příručka

Tato příručka je také vhodná pro

Yamaha Version2 instalační příručka

v jiných jazycích

Související papíry