Motorola Verve RIDER Read me

RIDER

Read me

en

Your wireless earbuds

1en

Wear

Power

S

tatus Light

Volume

& Track

Control

+

_

/

Calls, Voice

& Music

/

Calls, Voice

& Music

Step 1: Charge up & power on

2 en

Note: Before use, charge until the status light

turns green.

(Wall charger

not included.)

Charge up.

Power on.

Press and hold

Power

Step 2: Pair your earbuds

Step 2: Pair with Bluetooth

TM

3en

1

Turn on Bluetooth on your device.

2

Turn on your wireless earbuds.

3

On your device, go to the

Bluetooth menu to pair & connect.

Enter 0000 if prompted.

4

When the device and earbuds

connect, you’ll hear a tone.

Light is

solid blue.

Light blinks

blue.

Download Hubble Connect for VerveLife

Step 3: Download App

4 en

Download Hubble Connect for VerveLife

from The App Store

®

or Google Play™ to

enjoy some extra functionality such as

Battery Meter and last known location of your

headset.

Calls, Voice & Music Control

5en

The buttons at the ends of your earbuds

perform the same functions. Press either

button to control calls, voice commands, and

music.

Note: Voice control may not work on some

devices or in all languages.

Note: Some features are phone/network

dependent

Volume down

Or press & hold

to restart a track or

play the last track.

Volume up

Or press & hold

to play the next track.

+

Music Play/Pause

Answer/End Calls

Start Voice Command

Music Play/Pause

Answer/End Calls

Start Voice Command

mute during call press

Calls, Voice & Music Control6 en

Music

play/pause press

press and hold

then say the command

volume down/up press

next/previous track press and hold

Note: Depends on your

phone’s music controls.

change EQ settings press at at the

same time to go to the next

sound prole

Calls

Voice

answer/end call press

reject a call press and hold

or

to issue a voice

command

or

+

or

+

or

+

and

or

+

and

+

or

Advanced

7en

Status Lights

Pairing mode

Connected

Low battery

Charging

Full charge

Charge level check

Power oﬀ

blinking blue

steady blue

blinking red

steady red

steady green

steady green for 2 seconds

fading in/out blue

Advanced

Charge Level Check

8 en

Note: Not available on all models.

Note: Your battery is designed to last the life

of the product. It should only be removed by

a recycling facility. Any attempt to remove or

replace your battery may damage the

product and void your warranty.

Power

Press quickly to hear

remaining play time.

Advanced

Reset

9en

Turn oﬀ Bluetooth for all connected devices. Turn on

the wireless earbuds, then press and hold

and both volume buttons until the status light shows

alternating red and blue. You’ll hear a tone.

Note: This product contains exposed magnets and

may damage magnetic information, such as credit

card strips and ID cards.

Advanced

Second device

10 en

Do you use a phone and a tablet? Or two phones?

Connect with both of them at the same time.

1 Pair with your rst device using the steps in “Pair

with Bluetooth™” on page 3.

2 Turn oﬀ Bluetooth on your rst device (your phone,

tablet, or computer).

3 Turn oﬀ the wireless earbuds. Then turn them back

on

4 Pair with your second device using the steps in “Pair

with Bluetooth™” on page 3.

5 On your rst device, turn Bluetooth back on to

connect to it simultaneously. You’ll hear a tone when

the rst device connects.

Tip: To switch and play audio from the second

connected device, pause the current music device,

then press play on the second device.

Help & more

11en

• Get help: Visit www.motorolahome.com/sup-

port

• Find accessories at: www.motorolahome.com

or www.verve.life

Manufactured, distributed, or sold by Binatone Electronics

International LTD., oﬀicial licensee for this product. MOTOROLA and

the Stylized M Logo are trademarks or registered trademarks of

Motorola Trademark Holdings, LLC. and are used under license.

Apple logo is a trademark of Apple Inc., registered in the U.S. and

other countries. App Store is a service mark of Apple Inc. Google

Play and Android are trademarks of Google Inc.

All other trademarks are the property of their respective owners.

Bluetooth ID: D023372

Product ID: Motorola SF520 SF520-A

www.motorolahome.com

www.verve.life

RIDER

de

Erste Schritte

Wireless Headset

1de

Earbuds anlegen

+

_

/

Status-LED

Ein/Aus

Lautstärke &

Titel zurück/vor

Musik- &

Sprach-/

Anrufsteuerung

Musik- &

Sprach-/

Anrufsteuerung

Schritt 1: Aufladen & einschalten

2 de

Hinweis: Vor der Verwendung aufladen, bis

die Status-LED grün leuchtet.

Aufladen

Einschalten

(Separates

Ladegerät nicht

im Lieferumfang

enthalten)

Halten Sie die

Ein/Aus-Taste gedrückt.

Stránka se načítá ...

Motorola Verve RIDER Read me

Tato příručka je také vhodná pro

Motorola Verve RIDER Read me

v jiných jazycích

Související papíry

Jiné dokumenty