Zanussi FAE625 Uživatelský manuál

Kategorie
Pračky
Typ
Uživatelský manuál
WASHING MACHINE
PRALKA AUTOMATYCZNA
AUTOMATICKÁ PRACKA
AUTOMATICKÁ PRÁCKA
AUTOMATA MOSÓGÉP
FAE 625
USER MANUAL
INSTRUKCJA OBSLUGI
NÁVOD NA OBSLUHU
NÁVOD K OBSLUZE
HASZNÁLATI ÚTMUTA
35.292.811/0
SK
H
CZ
PL
GB
2
Dear customer,
Please read these operating instructions carefully
and pay particular attention to the safety notes
indicated in the first pages. We recommend that you
keep this instruction booklet for future reference and
pass it on to any future owners.
Transport damages
When unpacking the appliance, check that it is not
damaged. If in doubt, do not use it and contact the
Service Centre.
The symbols you will see on some paragraphs of this booklet have the following meaning:
The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly
important for your safety or correct functioning of the appliance.
The information marked with this symbol provides additional instructions and practical tips on the use of
the appliance.
Tips and information about economical and ecological use of the machine are marked with this symbol.
Our contribution to the protection of the
environment: we use recycled paper.
3
ENGLISH
Maintenance 22-23
Bodywork 22
Detergent dispenser drawer 22
Cleaning of the drainage area 22
Water inlet filter 23
Emergency emptying out 23
Frost precautions 23
Something not working? 24-26
Warnings 4-5
Disposal 5
Tips for environmental protection 5
Technical specifications 6
Installation 7-8
Unpacking 7
Hydraulic connection 7
Levelling 8
Electrical connection 8
Your new washing machine 9
Description of the appliance 9
Detergent dispenser drawer 9
Use 10
Control panel 10
Controls 10-12
Washing hints 13
Sorting the laundry 13
Temperatures 13
Before loading the laundry 13
Maximum loads 13
Laundry weights 13
Removing stains 13
Detergents and additives 14
Quantity of detergent to be used 14
International wash code symbols 15
Operating sequence 16-18
Washing programmes 19-21
Contents
4
Installation
All internal packing must be removed before using
the appliance. Serious damage may be caused to
the machine or adjacent furniture if the protective
transit devices are not removed or are not
completely removed. Refer to the relevant
paragraph in the instruction book.
Any electrical work required to install this appliance
must be carried out by a qualified electrician.
Any plumbing work required to install this
appliance must be carried out by a qualified
plumber.
After having installed the machine, check that it is
not standing on its electrical supply cable.
If the appliance is placed on a carpeted floor,
ensure that air can circulate freely between the feet
and the floor.
The power supply cable only can be replaced by a
person of the Technical Service.
Use
This appliance is designed for domestic use. It
must not be used for purposes other than those for
which it was designed.
Only wash fabrics which are designed to be
machine washed. Follow the instructions on each
garment label.
Do not overload the appliance. Follow the
instructions in the instruction book.
Make sure that all pockets are empty. Objects such
as coins, safety pins, pins and screws can cause
extensive damage.
Do not machine wash garments saturated with
petroleum, methylated spirits, trichlorethylene, etc.
If such fluids have been used to remove stains
prior to washing, wait until they have completely
evaporated from the fabric before placing garments
in the appliance.
Place small items such as socks, belts, etc. in a
cloth bag or pillowcase to prevent them getting
trapped between the drum and the tub.
Use only the recommended quantities of fabric
softener. An excessive amount could damage the
laundry.
Warnings
Leave the porthole door slightly ajar when the
appliance is not in use. This preserves the door
seal and prevents the formation of musty smells.
Always check that water has emptied out before
opening the door. If not, drain the water following
the instructions in the instruction book.
Always unplug the appliance and shut the water
tap after use.
General safety
Repairs to the machine must be carried out only by
qualified personnel. Repairs carried out by
inexperienced persons could cause serious
danger. Contact your local Service Centre.
Never pull the power supply cable to remove the
plug from the socket; always take hold of the plug
itself.
During high temperature wash programmes the
door glass may get hot. Do not touch it!
The following warnings are provided in the interests of overall safety. You must read them carefully before
installing or using the appliance.
5
ENGLISH
Disposal
Tips for environmental protection
Packaging materials
The materials marked with the symbol are
recyclable.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by disposing of
them properly in appropriate collection containers.
Machine
Use authorised disposal sites for your old appliance.
Help to keep your country tidy!
To save water, energy and to help protect the
environment, we recommend that you follow these
tips:
Normally soiled laundry may be washed without
prewashing in order to save detergent, water and
time (the environment is protected too!).
The machine works more economically if it is fully
loaded.
With adequate pre-treatment, stains and limited
soiling can be removed; the laundry can then be
washed at a lower temperature.
Measure out detergent according to the water
hardness, the degree of soiling and the quantity of
laundry being washed.
Child safety
Children are often not aware of how dangerous
electrical appliances can be. When the machine is
working, children should be carefully supervised
and not be allowed to play with the appliance.
The packaging components (e.g. plastic film,
polystyrene) can be dangerous to children - danger
of suffocation! Keep them out of children’s reach.
Keep all detergents in a safe place out of children’s
reach.
Make sure that children or pets do not climb into
the drum.
When the appliance is to be scrapped, cut off the
electrical supply cable and destroy the plug with
the remaining cable. Disable the door catch in
order to prevent children from becoming trapped
inside while playing.
6
DIMENSIONS Height 85 cm
Width 60 cm
Depth 60 cm
MAXIMUM RECOMMEND LOAD Cotton, linen 5 kg
Synthetics 2 kg
Delicates 2 kg
Woollens 1 kg
SPIN SPEED 600 r.p.m. max.
POWER SUPPLY VOLTAGE/FREQUENCY 220-230 V/50 Hz
TOTAL POWER ABSORBED 2100 W
MINIMUM FUSE PROTECTION 10 A
WATER PRESSURE Minimum 50 kPa
Maximum 800 kPa
This appliance complies with the following EEC Directives:
73/23/EEC of 19/02/73 relating to low voltage
89/336/EEC of 03/05/89 relating to electromagnetic compatibility.
Technical specifications
It is dangerous to alter the specifications or attempt to modify this product in any way.
Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
Any electrical work required to install this appliance should be carried out by a qualified electrician or
competent person.
Any plumbing work required to install this appliance should be carried out by a qualified plumber or
competent person.
The power supply cable only can be replaced by a person of our Service Force Centre.
Intallation instructions
7
ENGLISH
Installation
Transit security bars
Before starting the machine up, the transport
security bars must be removed as follows:
You are advised to keep all the transport security
bars in case the appliance has to be transported
again.
1. Unscrew and remove
the three rear screws
by means of a key.
2. Lean the appliance
back on the rear and
fit one of the
polystyrene angles
between the appliance
and the floor.
Make sure the hoses
are not squashed.
3. Carefully remove the
plastic bags on the left
and the right, pulling
them to the centre of
the appliance
4. Place the machine in an upright position and
remove the three plastic bolts.
5. Plug the 3 holes with the plastic plugs which you
can find in the envelope containing the instruction
booklet.
Hydraulic connection
There should be a COLD WATER tap near the
washing machine with a screwing on connection
pipe of 3/4 gas for the water supply, a sink, a wash
basin or a drainage system in the wall.
Previously check if:
it is not a hot water tap.
the running water is clean. If not, run off a
reasonable amount of water to flush out any
debris that may have collected in the pipes.
Have the permanent drainage system in the wall
checked by a plumber.
A) Place the enclosed
rubber joint, delivered in
a plastic bag together
with the appliance (A)
Fig.6), at the very end of
the inlet hose and
carefully screw the pipe
to the tap taking care not
to damage the
screwdrive and fix the
nut well on to the end in
order to avoid leaking.
B) If necessary turn the
hose adequately by
unscrewing the nut at the
rear of the appliance.
C) Now tighten the nut
anew to avoid leaks.
(Open the tap and asure
that it does not leak and
close it again.)
D) Place the discharging
hose in a washbasin or
sink with the aid of the
bent piece delivered
separately. The bent
piece has to be entered
into the tube’s mouth in
order to assure the
support. Aforesaid piece
allows the hose to be
fixed to the wall by means
of an opening on the
upper part and that way
the hose does not move
and its falling is avoided.
P0287
P0018
AL009
2
1
P0001
P0002
P0021
P0022
AL013
A
8
1,5 m. Max.
60 cm. Min.
90 cm. Max.
IMPORTANT: The distance from the floor to the
highest part of the hose should be between 60 to
90 cm. (It is advised to be between 60 and 70 cm).
The hose must not be bent nor twisted to avoid
clogging. Should a prolongation of the discharging
hose be unavoidable this must never surpass 1.5 m
and must be of the same diameter as the original
hose.
Make sure the hoses are not too tense.
Levelling
Level the appliance by loosening or tightening the
feet. Once in the right position fix the feet by
pushing the nuts against the base of the case.
Accurate levelling will prevent vibration, noise and
displacement of the appliance during operation.
Some vibration is inevitable, especially if placed on
a wooden floor. Wooden floors are particularly
susceptible to vibrations. For advice, consult a
builder. If posible always place the appliance on a
solid floor.
Electrical connections
Before plugging the appliance make sure that:
1º. the mains of your installation is the same as on
the rating plate of your appliance (the plate is
sticked to the rear of the appliance).
2º. The meter, the fuses, the wiring and the socket
outlet can support the max. power absorbed stated
on the rating plate.
3º. The socket base and the plug must fit in
adequately without any reducing interposition,
multiple outlets or adapters. If necessary replace
the socket outlet by an adequate one.
The applicable rules for electrical security
require an adequate earthing. The plug of the
appliance is provided with such a device.
Make sure your socket outlet is provided with
an adequate earthing too.
The manufacturer declines any liability in case
of accidents or incicents should these safety
measures not be observed.
The power supply cable only can be replaced by
a person of our Service Force Centre.
P0254
9
ENGLISH
This new machine meets all modern requirements for effective treatment of laundry with low water, energy and
detergent consumption.
The balance control device ensures the machine is stable during the spin.
1 Detergent dispenser drawer
2 Programme chart
3 Control panel
4 Door handle
5 Drainage area door
6 Adjustable feet
Detergent dispenser drawer
Prewash
Main wash
Fabric softener, starch
Your new washing machine
Description of the appliance
R0001 3D
10
Use
1. Detergent dispenser drawer
Programme option buttons
Depending on the programme, different option
buttons can be combined.
When these buttons are pressed, the corresponding
lights come on. When they are pressed again, the
lights go off.
If an incompatible option with the selected
programme has been chosen, the corresponding
light flashes for about 2 seconds.
The option buttons:
NO SPIN or RINSE HOLD;
HALF LOAD and SUPER RINSE
must be selected after the required programme has
been chosen, by turning the programme selector
(see section 9) and before starting the machine, by
pressing button START / PAUSE.
2.
NO SPIN or RINSE HOLD
By pressing this button you have the possibility of
choosing between the following options:
NO SPIN: by selecting this option all the
spinning phases are turned off. To be used for
extremely delicate items.
RINSE HOLD (no-wrinkle): by selecting this
option the water of the last rinse is not drained.
When the programme has finished the light END
goes on. Before opening the door the water must be
drained.
If both lights ( NO SPIN and RINSE HOLD)
are not illuminated the programme will run without
either NO SPIN or RINSE HOLD.
3. HALF LOAD button
This option is available for COTTON and LINEN
programmes. By selecting this button the machine
will perform one rinse less.Use this option when
washing loads weighing no more than 2,5 kg.
4. SUPER RINSE button
Can be used with all programmes, except wool.
The machine will add 2 rinses to the selected
programme.
This option is recommended for people who are
allergic to detergents and in areas where the water
is very soft.
5. START / PAUSE button
After selecting the required programme, by the
programme selector (see section 9), press this
button to start the machine; the corresponding light
stops flashing and will keep lighting until the
programme finishes.
To interrupt the running programme, depress
START / PAUSE button: the corresponding
light starts to flash.
To restart the programme from the point at which it
was interrupted, press START / PAUSE button
again.
Control panel
11
ENGLISH
6. DELAY START button
This button allows the delay of starting of the
washing programme by 12 H, 8 H, 4 H and 2 H
hours.
The delay which has been selected is indicated
when the corresponding light comes on.
To use this option proceed as follows:
1. Select the required programme by the
programme selector (see section 9).
2. Press the required option buttons.
3. Push DELAY START button, as many times
as necessary to get the required delay until the
corresponding light comes on.
4. Press START / PAUSE button.
IMPORTANT!
• If you would like to cancel DELAY START
option or to change the selected delay, proceed as
follows:
1. Turn the dial programme selector to position “
O”.
2. Start the normal process to select a programme
again.
If you need to stop the machine to put in more
laundry (having selected DELAY START option
first), proceed as follows:
1. Depress START / PAUSE button.
2. Turn the dial programme selector to position “
O”.
3. Wait one or two minutes before opening the
door to give the electric locking mechanism
time to release.
4. Place the laundry in the drum.
5. Follow the normal operating sequence to select a
programme.
DELAY START option can't be selected with
programmes “Q” (DRAIN) or “R” (SPIN).
7. Programme progress display
When DELAY START option is chosen, the light
relevant to the selected delay lights up.
After the machine has started, the remaining time is
shown by the corresponding indicator light.
During programme cycle the light
CYCLE EXECUTION will remain lit.
The light END will illuminate to indicate that the
selected programme has finished.
The light END flashes in the event of operating
problems:
4 flashes: door open.
2 flashes: problem with water draining.
1 flash: problem with water supply.
For more information see paragraph "Something not
working?" at the end of this booklet.
12
8. Temperature selector dial .
This dial allows you to select the temperature of the
washing cycle in accordance with the kind of clothes
to be washed.
Turn the control until the required temperature
coincides with the marker.
On the program table you will find the maximum
temperature foreseen for each cycle. Selecting
any program can be run through with cold water.
9. Programme selector dial
The selector dial can be turned either clockwise or
counter-clockwise.
Use this selector dial to select the required
programme.
At the end of each programme the selector dial
must be turned to position “
O”, to switch off the
machine.
ATTENTION!
If the programme selector dial is turned to another
position (programme) when the machine is working,
the lights of the programme progress display start to
flash. The machine will not perform the new selected
programme, but it will continue running on the same
cycle.
13
ENGLISH
Washing hints
Sorting the laundry
Follow the wash code symbols on each garment
label and the manufacturer’s washing instructions.
Sort the laundry as follows:
whites, coloureds, synthetics, delicates, woollens.
Temperatures
90° for normally soiled white cottons and linen
(e.g. tea cloths, towels, tablecloths,
sheets...)
60° for normally soiled, colour fast garments
(e.g. shirts, night dresses, pyjamas....) in
linen, cotton or synthetic fibres and for
lightly soiled white cotton (e.g. underwear).
(cold)for delicate items (e.g. net curtains), mixed
30°-40° laundry including synthetic fibres and
woollens.
Before loading the laundry
Never wash whites and coloureds together. Whites
may lose their “whiteness” in the wash.
New coloured items may run in the first wash; they
should therefore be washed separately the first time.
Make sure that no metal objects are left in the
laundry (e.g. hair clips, safety pins, pins).
Button up pillowcases, close zip fasteners, hooks
and poppers. Tie any belts or long tapes.
Remove persistent stains before washing. Rub
particularly soiled areas with a special detergent or
detergent paste.
Treat curtains with special care. Remove hooks or tie
them up in a bag or net.
Maximum loads
Recommended loads are indicated in the
programme charts.
General rules:
Cotton, linen: drum full but not too tightly packed;
Synthetics: drum no more than half full;
Delicate fabrics and woollens: drum no more than
one third full.
Washing a maximum load makes the most efficient
use of water and energy.
For heavily soiled laundry, reduce the load size.
Laundry weights
The following weights are indicative:
bathrobe 1200 g
napkin 100 g
quilt cover 700 g
sheet 500 g
pillow case 200 g
tablecloth 250 g
towelling towel 200 g
tea cloth 100 g
night dress 200 g
ladies’ briefs 100 g
man’s work shirt 600 g
man’s shirt 200 g
man’s pyjamas 500 g
blouse 100 g
men’s underpants 100 g
Removing stains
Stubborn stains may not be removed by just water
and detergent. It is therefore advisable to treat them
prior to washing.
Blood: treat fresh stains with cold water. For dried
stains, soak overnight in water with a special
detergent then rub in the soap and water.
Oil based paint: moisten with benzine stain
remover, lay the garment on a soft cloth and dab the
stain; treat several times.
Dried grease stains: moisten with turpentine, lay
the garment on a soft surface and dab the stain with
the fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a rust
removing product used cold. Be careful with rust
stains which are not recent since the cellulose
structure will already have been damaged and the
fabric tends to hole.
Mould stains: treat with bleach, rinse well (whites
and fast coloureds only).
Grass: soap lightly and treat with bleach (whites and
fast coloureds only).
Ball point pen and glue: moisten with acetone (*),
lay the garment on a soft cloth and dab the stain.
Lipstick: moisten with acetone as above, then treat
stains with methylated spirits. Remove any residual
marks from white fabrics with bleach.
Red wine: soak in water and detergent, rinse and
treat with acetic or citric acid, then rinse. Treat any
residual marks with bleach.
14
Ink: depending on the type of ink, moisten the fabric
first with acetone (*), then with acetic acid; treat any
residual marks on white fabrics with bleach and then
rinse thoroughly.
Tar stains: first treat with stain remover, methylated
spirits or benzine, then rub with detergent paste.
(*) do not use acetone on artificial silk.
Detergents and additives
Good washing results also depend on the choice of
detergent and use of the correct quantities to avoid
waste and protect the environment. Although
biodegradable, detergents contain substances
which, in large quantities, can upset the delicate
balance of nature.
The choice of detergent will depend on the type of
fabric (delicates, woollens, cottons, etc.), the colour,
washing temperature and degree of soiling.
All commonly available washing machine detergents
may be used in this appliance:
– powder detergents for all types of fabric,
– powder detergents for delicate fabrics (60°C max)
and woollens,
– liquid detergents, preferably for low temperature
wash programmes (60°C max) for all types of
fabric, or special for woollens only.
The detergent and any additives must be placed in
the appropriate compartments of the dispenser
drawer before starting the wash programme.
If using concentrated powder or liquid detergents, a
programme without prewash must be selected.
The washing machine incorporates a recirculation
system which allows an optimal use of the
concentrated detergent.
Pour liquid detergent into the dispenser drawer
compartment marked just before starting the
programme.
Any fabric softener or starching additives must be
poured into the compartment marked before
starting the wash programme.
The bleaching agent (chlorine) can be used only for
white or fast coloured cotton and linen items.
Pour it into the compartment marked .
Follow the product manufacturer’s recommendations
on quantities to use and do not exceed the «MAX»
mark in the detergent dispenser drawer.
Quantity of detergent to be used
The type and quantity of detergent will depend on
the type of fabric, load size, degree of soiling and
hardness of the water used.
Water hardness is classified in so-called “degrees” of
hardness. Information on hardness of the water in
your area can be obtained from the relevant water
supply company, or from your local authority.
Follow the product manufacturers’ instructions on
quantities to use.
Use less detergent if:
– you are washing a small load,
– the laundry is lightly soiled,
– large amounts of foam form during washing.
Degrees of water hardness
Level Characteristic
Degrees
German
°dH
French
°T.H.
soft
medium
hard
very hard
0- 7
8-14
15-21
more than
21
0-15
16-25
26-37
more than
37
1
2
3
4
15
ENGLISH
International wash code symbols
These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry.
Energetic wash
Delicate wash
Max. wash
temperature
95°C
Max. wash
temperature
60°C
Max. wash
temperature
40°C
Max. wash
temperature
30°C
Hand wash Do not
wash
at all
Bleaching Bleach in cold water Do not bleach
Ironing Hot iron
max 200°C
Warm iron
max 150°C
Lukewarm iron
max 110°C
Do not iron
Dry cleaning Dry cleaning
in all solvents
Dry cleaning in
perchlorethylene,
petrol, pure alcohol,
R 111 & R 113
Dry cleaning
in petrol,
pure alcohol
and R 113
Do not
dry clean
Drying Flat On the line On clothes
hanger
Tumble dry
high
temperature
low
temperature
Do not
tumble dry
95
60
40
40
40
30
30
16
4. Select the required programme
Turn the programme selector to the required
programme.
5. Select the temperature.
Turn the spin selector to the required position.
6. Select the required option push
button/s
1. Place the laundry in the drum
Open the door by pulling the handle outwards. Place
the laundry in the drum, one item at a time, shaking
them out as much as possible. Close the door.
2. Measure the detergent
Pull out the dispenser drawer until it stops.
Measure the required amount of detergent, pour it
into the main wash compartment and into the
compartment marked (if you have selected a
progamme with PRE-WASH).
3. Measure the fabric softener
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
"MAX" mark in the drawer).
Close the drawer gently.
R0071
R0070
P0004
Operating sequence
Before washing your first load of laundry, we recommend that you run a cotton cycle at 60° C, with the machine
empty, in order to remove any manufacturing residue from the drum and tub. Pour half of the normal amount of
detergent into the main wash compartment and start up the machine.
17
ENGLISH
9. Modification of a running
washing programme
Once the programme has started, it only can be
modified by turning the programme selector dial to
O” and afterwards the new programme can be
chosen.
The washing water remains in the tub, provided that
the machine does not reach the rinse phase, since,
in this case, the machine drains it automatically.
Start the new programme by pressing
START/PAUSE button.
10. Interrupting a programme
Depress START/PAUSE button to interrupt a
running programme, the corresponding light will
begin flashing. Press this button again to re-start the
programme.
11. Opening the door after the
programme has started
Firstly, stop the machine by pressing
START/PAUSE button. Wait about one or two
minutes then the END light illuminates and you
can open the door.
If the door does not open , this means that the
temperature of the water is too high, that the water
level exceed the lower limit of the door (which could
cause overflowing) or that the drum is spinning.
If the door cannot be opened but you need to open it,
switch the machine off by turning the selector dial to
O”. After approximately one or two minutes the door
can be opened. (PAY ATTENTION TO THE WATER
LEVEL!).
7. OPTIONAL! Select, if required,
DELAY START option button
Push DELAY START button as many times as
necessary until the corresponding light to the
required delay (12 H, 8 H, 4 H, 2 H) comes on.
8. Start the machine
Before starting the machine check that:
the appliance is plugged in.
the water supply tap is turned on.
the drain hose is correctly and securely positioned.
the door and the detergent dispenser drawer are
closed.
To start the selected programme, push
START/PAUSE button; the corresponding light
will stop flashing and will remain lit until the end of
the programme. During programme cycle the light
CYCLE EXECUTION will remain lit.
If DELAY START option has been chosen, the
machine will begin the countdown.
18
12. At the end of the programme
The machine stops automatically.
Release of the lock is indicated when END light
comes on.
Turn the programme selector dial to position “O” to
switch the machine off.
Remove the laundry from the drum and carefully
check that the drum is empty.
If you do not intend to put in another wash, turn off
the water tap. Leave the door open to prevent from
forming mildew and unpleasant smells.
ATTENTION!
If RINSE HOLD option has been selected,
END light goes on to indicate that the water
must be drained before opening
the door. To drain the water follow these three steps:
A) Turn the programme selector dial to
O.
B) Select programmes “Q” (DRAIN) or “R” (SPIN).
C) Press START/PAUSE button.
19
ENGLISH
Programme table
Washing programmes for cotton and linen
Load: 5 Kg.
If RINSE HOLD option has been selected, the last rinse water does not drain to avoid wrinkling in the
fabrics. To drain the water: Turn the programme selector dial to
O, select programme “Q” (DRAIN) or
“R” (SPIN) and press START/PAUSE button.
(**) In compliance with EC directive 92/75, the consumption figures indicated on the energy label refer to the
60° C wash programme for cotton (programme F) with a wash load of 4,5 Kg.
Programme
selector dial
position
or
or
or
or
A
WHITES
WITH
PREWASH
WHITES
WHITES
&
DAILY
WHITES
&
ECONOMY
(**)
Washing
programme
Stains and type of fabric Description
Possible option
For heavily soiled cotton items.
White cotton, for example
moderately soiled work
garments, sheets, household
linen, underwear, towels.
Daily cycle for white cotton.
Economy cycle with better
washing performances for white
cotton.
To cancel the running wash
programme and to switch the
machine off.
Prewash
Wash at -90° C
3 rinses
Spin
Wash at -90° C
3 rinses
Spin
Wash at -90° C
3 rinses
Spin
Wash at -90° C
3 rinses
Spin
B
C
or
WHITES
&
QUICK
Quick cycle for white cotton.
Wash at -90° C
3 rinses
Spin
D
F
O
20
Programme table
Washing programmes for synthetics, mixed fabrics, delicates, wool
Load: 2 Kg., wool 1 Kg.
or
or
G
SYNTHETICS
WITH
PREWASH
SYNTHETICS
&
QUICK
DELICATE
WOOL
Synthetic fabrics, underwear,
coloured garments, perma-press
shirts, blouses.
Quick cycle for synthetics.
Delicate fabrics, such as curtains.
To wash Woolmark garments
according to the instructions on the
garments label and following the
instructions booklet provided by the
manufacturer of this machine (M9604).
To cancel the running wash programme
and to switch the machine off.
Prewash
Wash at -60° C
3 rinses
Short spin
or
or
or
H
SYNTHETICS
WITH OUT
PREWASH
Synthetic fabrics, underwear,
coloured garments, perma-press
shirts, blouses.
Wash at -60° C
3 rinses
Short spin
Wash at -60° C
3 rinses
Short spin
Wash at -40° C
3 rinses
Short spin
Wash at 40° C
3 rinses
Short spin
J
SYNTHETICS
&
EASY IRON
Easy iron cycle for synthetics.
or
Wash at -40° C
3 rinses
Short spin
K
L
M
or
HAND WASH
Particularly delicate washing suitable
for articles of clothing whose label
indicates that they must be
handwashed
Wash at -40° C
3 rinses
Short spin
N
O
If RINSE HOLD option has been selected, the last rinse water does not drain to avoid wrinkling in the
fabrics. To drain the water: Turn the programme selector dial to O, select programme “Q” (DRAIN) or
“R” (SPIN) and press START/PAUSE button.
Programme
selector dial
position
Washing
programme
Stains and type of fabric Description
Possible
option
1 / 1

Zanussi FAE625 Uživatelský manuál

Kategorie
Pračky
Typ
Uživatelský manuál