Samsung LE-23R81B Uživatelský manuál

Kategorie
LCD televizory
Typ
Uživatelský manuál
LCD TV
LE23R8
LE26R8
Owners Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
BN68-01166G-04
Register your product at www.samsung.com/global/register
Record your Model and Serial number here for future reference.
▪ Model _______________ Serial No. _______________
BN68-01166G-04-Cover.indd 1 2007-09-29 �� 11:13:16
English - 2
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
M4 X L16
Remote Control
& Batteries
(AAA x 2)
Power Cord Cover-Bottom
Stand Screw
X 4
Stand Cleaning Cloth
< 2 >
< 3 >
1. Place the TV faced down on a soft cloth or cushion on a table.
2.
Put the stand into the hole at the bottom of the TV.
3. Insert screw into the hole indicated and tighten.
The stand is installed for models with the screen size of 37 inch and above.
Installing the Stand
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
The stand and stand screw may not be included depending on the model.
Wall mount items (sold separately) allow you to mount
the TV on the wall.
For detailed information on installing the wall mount,
see the instructions provided with the Wall Mount items.
Contact a technician for assistance when installing the
wall mounted bracket.
Samsung Electronics is not responsible for any damage
to the product or injury to yourself or others
if you elect to install the TV on your own.
Remove the stand and cover the bottom hole with a
cap and fasten with two screws.
Installing the Wall Mount Kit
Owner’s Instructions
Warranty card Safety Guide Registration Card
Do not install your Wall Mount Kit while your
TV is turned on. It may result in personal injury
due to electric shock.
BN68-01166G-03Eng-0518.indd 2 2007-05-21 �� 11:12:17
English - 3
Viewing the Control Panel
The product colour and shape may vary depending on the model.
Front Panel buttons
Touch the right side of
each button to operate.
1
SOURCE
Toggles between all the available input
sources (TV, Ext1, Ext2, AV, S-Video,
Component, PC, HDMI1, HDMI2,).
In the on-screen menu, use this button as
you would use the ENTER button on the
remote control.
2
MENU
Press to see an on-screen menu of your
TV’s features.
3
Press to increase or decrease the volume.
In the on-screen menu, use the
buttons as you would use the and
buttons on the remote control.
4
Press to change channels.
In the on-screen menu, use the
buttons as you would use the and
butons on the remote
control.
5
(POWER)
Press to turn the TV on and off.
POWER INDICATOR
Blinks and turns off when the power is on
and lights up in stand-by mode.
6
REMOTE CONTROL SENSOR
Aim the remote control towards this spot on
the TV.
7
SPEAKERS
1
2
3
4
5
6
7
[LE23R81, LE26R81, LE23R83, LE26R83]
1
2
3
4
5,6
7
[LE23R82, LE26R82, LE23R84, LE26R84]
BN68-01166G-03Eng-0518.indd 3 2007-05-21 �� 11:12:21
English - 4
Viewing the Connection Panel
Power Input
1 2 3 4
7
8
9
0
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
1 Connecting Set-Top Box, VCR or DVD
-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
Connector
EXT 1
EXT 2
Video
O
O
Audio (L/R)
O
O
RGB
O
Output
Video + Audio (L/R)
Only TV
Output you can choose.
Input
5
6
BN68-01166G-03Eng-0518.indd 4 2007-05-21 �� 11:12:23
English - 6
8 SERVICE
- Service connection for qualified service engineer.
9 Connecting Component Devices (DTV/DVD)
- Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of
your set and the other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top
Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y")
on your set.
- The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y,
B-Y and R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends
to corresponding audio out connectors on the DTV or DVD.
- This LCD TV displays its optimum picture resolution in 720p mode.
- This LCD TV displays its maximum picture resolution in 1080i mode.
0 Kensington Lock
- The Kensington lock (optional) is a device used to physically fix the system when used in a public
place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The place of the Kensington Lock may be different depending on its model.
BN68-01166G-03Eng-0518.indd 6 2007-05-21 �� 11:12:24
English - 7
Viewing the Remote Control
1 Television Standby button
2
Number buttons for direct
channel access
3
One/Two-digit channel selection
4
Selects the TV mode directly
5 Used to display Channel Lists on
the screen.
6
Volume increase
Volume decrease
7 Temporary sound switch-off
8
Menu display and
change confirmation
9
Sound mode selection
0 Returns to the previous menu.
!
Picture effect selection
@ Adjusts screen brightness to
save energy.
#
Sound effect selection
$ SRS TSXT selection
% Available source selection
^ Previous channel
&
Selects the HDMI mode directly.
*
Automatic Power-off
(
P : Next channel
P : Previous channel
) Exit the OSD
a
Control the cursor in the menu
b
Use to see information on the
current broadcast
c Picture freeze
e
Picture size selection
f
PIP:Picture-In-Picture On / Off
SOURCE: Input source selection
POSITION: PIP position selection
P
: Next channel
P : Previous channel
Teletext Functions
4
Exit from the teletext display
8 Teletext index
% Teletext mode selection (LIST/FLOF)
^ Teletext sub page
(
P : Teletext next page
P : Teletext previous page
)
Teletext cancel
b Teletext reveal
d
Alternately select Teletext, Double, or Mix.
9!ce
Fastext topic selection
f
PIP:
Teletext Hold
f
SOURCE:
Teletext Store
f
POSITION:
Teletext
size selection
This is a special remote control for the visually impaired,
and has Braille points on the Power, Channel and Volume buttons.
BN68-01166G-03Eng-0518.indd 7 2007-05-21 �� 11:12:26
English - 9
When the TV is initially powered on, several basic settings
proceed automatically and subsequently. The following
settings are available.
1. Press the POWER button on the remote control.
The message "Start Plug & Play" is displayed with "OK"
selected.
2. Select the appropriate language by pressing the or but
tons.
Press the ENTER button to confirm your choice.
3.
Press the or buttons to select “Shop” or “Home”, then
the ENTER button.
We recommend setting the TV to Home mode for the best
picture in your home environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode,
press the Volume button and then hold down the MENU button for five seconds on the side
panel of the TV.
4. The message "Check antenna input." is displayed with "OK" selected.
Press the ENTER button.
Please check that the antenna cable is connected correctly.
5. Select the appropriate country by pressing the or button.
Press the ENTER button to confirm your choice.
6.
The "Auto Store" menu is displayed with the "Start" selected. Press the
ENTER
button.
The channel search will start and end automatically.
After all the available channels are stored, the "Clock Set" menu appears.
Press the ENTER button at any time to interrupt the memorization process.
7. Press the ENTER
button.
Select the "Month", Year", "Day", Hour" or "Minute" by pressing the
or
buttons.
Set the "Month", Year", "Day", Hour" or "Minute" by pressing the
or
buttons.
You can also set the hour and minute by pressing the number buttons on the remote control.
Press the ENTER
button to confirm your setting.
Plug & Play
Language
: Select your language.
Country: Select your country.
Auto Store
: Automatically scans for and stores channels available in the local area.
Clock Set
: Sets the current time for the TV clock.
Plug & Play
Start Plug & Play.
Enter Exit
OK
BN68-01166G-03Eng-0518.indd 9 2007-05-21 �� 11:12:29
English - 10
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the
or
button to select "Setup", then press the
ENTER button.
2. Press the ENTER
button again, to select "Plug & Play".
3. The message to "Start Plug & Play" is displayed.
- Storing Channels Automatically
- Storing Channels Manually
TV
Setup
Plug & Play
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Off
PC
sMore
TV
Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Plug & Play
Start Plug & Play.
Enter Return
OK
Move Enter Return
Move Enter Return
You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
1. Press the MENU button to display the menu.
Press the
or
button to select "Channel", then press the ENTER button.
2. Press the ENTER
button to select “Country”.
3. Select the appropriate country by pressing the or button.
Press the ENTER button to confirm your choice.
4. Press the
or
button to select “Auto Store”, then press the ENTER button.
5. Press the ENTER
button.
The TV will begin memorizing all of the available channels.
Press the ENTER button at any time to interrupt the memorization process and return to the
"Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears.
Storing Channels Automatically
BN68-01166G-03Eng-0518.indd 10 2007-05-21 �� 11:12:32
English - 13
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have
been automatically stored.
Give easily remembered numbers to the channels
that you watch most often.
1.
Press the MENU button to display the menu. Press the
or
button to select "Channel", then press the ENTER button.
2. Press the
or
button to select "Sort", then press the
ENTER button.
3. Select the channel number that you wish to change by press
ing the
or
button repeatedly. Press the ENTER button.
The selected channel number and name are moved to
right side.
4. Press the
or
button to move to the position in which you
would like to change and then press the ENTER button.
The selected channel is exchanged with the one
previously stored to the chosen number.
5. Repeat steps 3 to 4 for another channel to be sorted.
6. Press the EXIT
button to exit.
Sorting the Stored Channels
Assigning Channels Names
Sort
Prog. Ch. Name
0 C--
1 C23
2 C16
3 C3
4 S1
s
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed,
allowing you to assign new names.
1. Press the MENU button to display the menu.
Press the
or
button to select "Channel", then press the
ENTER button.
2. Press the
or
button to select "Name", then press the
ENTER button.
3. If necessary, select the channel to be assigned to a new
name by pressing the
or
button. Press the ENTER
button.
The selection bar is displayed around the name box.
4.
The characters available are : Letters of the alphabet
(A~Z) / Numbers (0~9) / Special characters ( -, space)
5. Repeat steps
3 to 4 for each channel to be assigned to a new
name.
6. Press the EXIT
button to exit.
Name
Prog. Ch. Name
0 C- -
------
1 C23
------
2 C16
------
3 C3
------
4 S1
------
s
TV
To...
Select a letter, number or symbol
Move on the next letter
Move back the previous letter
Confirm the name
Then...
Press the
or
button
Press the
button
Press the
button
Press the ENTER button
TV
Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
TV
Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
TV
Move Enter Return
Move Enter Return
Move Enter Return
Move Enter Return
BN68-01166G-03Eng-0518.indd 13 2007-05-21 �� 11:12:43
English - 14
Use fine tuning to manually adjust a particular channel for
optimal reception.
1. Use the number buttons to directly select the channel that
you want to fine tune.
2. Press the MENU
button to display the menu.
Press the
or
button to select "Channel", then press the
ENTER button.
3. Press the
or
button to select "Fine Tune", then press
the ENTER button.
4. Press the
or
button to adjust the fine tuning.
Press the ENTER button.
5. Press the EXIT
button to exit.
Fine tuned channels that have been saved are marked with
an asterisk "*" on the right-hand side of the channel number
in the channel banner. And the channel number turns red.
To reset the fine-tuning, select "Reset" by pressing the
or
button and then press the ENTER button.
Fine Tuning Channel Reception
Fine Tune
P 1
0
Reset
TV
Channel
Country : Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
You can select the type of picture which best corresponds to
your viewing requirements.
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the ENTER
button again, to select "Mode".
3. Press the
or
button to select the desired picture effect.
Press the ENTER button.
4. Press the EXIT
button to exit.
Dynamic: Selects the picture for high-definition in a bright
room.
Standard: Selects the picture for optimum display in a
normal environment.
Movie: Selects the picture for comfortable display in a
dark room.
The Picture mode must be adjusted separately for each input
source.
You can return to the factory defaults picture settings by
selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory
Defaults" on page 19)
Changing the Picture Standard
You can also press the
P.MODE button on the remote
control to select one of the
picture settings.
Picture
Mode : Dynamic
Contrast
100
Brightness 50
Sharpness
75
Colour
55
Tint G50 R50
Colour Tone : Cool1
Backlight : 0
s
More
TV
Picture
Mode : Dynamic
Contrast
100
Brightness 50
Sharpness
75
Colour
55
Tint G50 R50
Colour Tone : Cool1
Backlight : 0
s
More
TV
Dynamic
Standard
Movie
Move Enter Return
Adjust
Save
Return
Move Enter Return
Move Enter Return
BN68-01166G-03Eng-0518.indd 14 2007-05-21 �� 11:12:49
English - 16
Activating Backlight.
Picture
Mode : Dynamic
Contrast
100
Brightness 50
Sharpness
75
Colour
55
Tint G50 R50
Colour Tone : Cool1
Backlight : 0
s
More
TV
You can adjust the screen brightness by adjusting the LCD
backlight brightness. (0~10)
1. To select the desired picture effect, follow the “Changing the
Picture Standard” instructions number 1 to 3. (On page 14)
2. Press the ▲ or ▼ button to select “Backlight”, then press the
ENTER button.
3. Press the ◄ or ► button to decrease or increase the value of
a particular item.
Press the ENTER button.
4. Press the EXIT button to exit.
5
Backlight
Adjust Return
Move Enter Return
BN68-01166G-03Eng-0518.indd 16 2007-05-21 �� 11:12:56
English - 18
You can select the picture size which best corresponds to
your viewing requirements.
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture"
2. Press the
or
button to select "Size", then press the
ENTER button.
3. Select the required option by pressing the
or
button.
Press the ENTER button.
4. Press the EXIT
button to exit.
"Auto Wide" function is available only in "TV", "Ext1", "Ext2",
"AV", and "S-Video" mode.
In PC Mode, only "16:9" or "4:3" mode can be adjusted.
Zoom : Select by pressing the
or
buttons.
Use the
or
button to move the picture up and
down. After selecting , use the
or
button to
magnify or reduce the picture size in the vertical
direction.
Wide Zoom : Move the screen up/down using the
or
buttons after selecting the by pressing the
or ENTER button.
Changing the Picture Size
You can select these options
by simply pressing the P.SIZE
button on the remote control.
Size
Auto Wide
16:9
Wide Zoom
Zoom
4:3
Just Scan
Picture
Detailed Settings
Size : Auto Wide
Screen Mode : 16 : 9
Digital NR : Off
Active Colour : Off
DNle : Off
Reset : Ok
More
Auto Wide:
Automatically adjusts the picture size to the "16:9"
aspect ratio.
16:9:
Adjusts the picture size to 16:9 appropriate for DVDs or
wide broadcasting.
Wide Zoom:
Magnify the size of the picture more than 4:3.
Zoom:
Magnifies the 16:9 wide picture (in the vertical direction)
to fit the screen size.
4:3:
This is the default setting for a video movie or normal broadcasting.
Just Scan : Displays the input scenes as they are without any cutoff
when HDMI 720p,1080i signals are input.
TV
TV
Move Enter Return
Move Enter Return
BN68-01166G-03Eng-0518.indd 18 2007-05-21 �� 11:13:02
English - 19
When setting the picture size to Auto Wide in a 16:9 wide TV,
you can determine the picture size you want to see the 4:3
WSS (Wide Screen Service) image or nothing. Each individual
European country requires different picture size so this
function is intended for users to select it.
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the
or
button to select "Screen Mode", then press
the ENTER button.
3. Select the required option by pressing the
or
button.
Press the ENTER button.
Available options: 16:9, Wide Zoom, Zoom, 4:3
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnify the size of the picture more than 4:3.
Move the screen up/down using the or ▼ button after
selecting the by pressing the or ENTER button.
Zoom: Magnify the size of the picture vertically on screen.
4:3: Sets the picture to 4:3 normal mode.
4. Press the EXIT
button to exit.
Picture Size is available in Auto Wide mode.
This function is not available in PC, HDMI or Component
mode.
Press the STILL button to freeze a moving picture into a
still one. Press again to cancel.
Freezing the Current Picture
Selecting the Screen Mode
Picture
Detailed Settings :
Size : Auto Wide
Screen Mode : 16 : 9
Digital NR : Off
Active Colour : Off
DNle : Off
Reset : Ok
More
Picture
Detailed Settings :
Size : Auto Wide
Screen Mode : 16 : 9
Digital NR : On
Active Colour : Off
DNle : Off
Reset : Ok
More
16:9
Wide Zoom
Zoom
4:3
TV
TV
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3
(on page 14.)
2. Press the
or
button to select "Reset", then press the
ENTER button.
3. Press the
or
button to select "OK" or "Cancel".
Press the ENTER button.
4. Press the EXIT button to exit.
The "Reset" will be set for each picture mode.
Picture
Detailed Settings
Size : Auto Wide
Screen Mode : 16 : 9
Digital NR : Off
Active Colour : Off
DNle : Off
Reset : Ok
More
TV
Picture
Detailed Settings
Size : Auto Wide
Screen Mode : 16 : 9
Digital NR : Off
Active Colour : Off
DNle : Off
Reset : OK
More
OK
Cancel
TV
Move Enter Return
Move Enter Return
Move Enter Return
Move Enter Return
BN68-01166G-03Eng-0518.indd 19 2007-05-21 �� 11:13:08
English - 21
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the
picture of set programme or video input from any connected
equipment while watching the main picture.
1. Press the MENU button to display the menu.
Press the or button to select “Setup”, then press the
ENTER button.
2. Press the
or
button to select "PIP", then press the
ENTER button.
3. Press the ENTER button again.
Press the
or
button to select "On", then press ENTER
button.
If the PIP is activated, the size of the main picture turns
to "16:9".
4. Press the
or
button to select "Source", then press
ENTER button. Select a source of the sub picture by pressing
the
or
button and press the ENTER button.
The sub picture can serve different source selections
based on what the main picture is set to.
5. Press the
or
button to select "Size" of the sub picture
and then press the ENTER button.
Select a size of the sub picture by pressing the
or
button
and then press the ENTER button.
If main picture is in "Component" and "PC" mode, "Size" is not
available.
6. Press the
or
button to select "Position", then press the
ENTER button. Select the position of the sub picture by
pressing the
or
button and then press the ENTER button.
7. Press the
or
button to select "Programme" and then press the ENTER button.
You can select the channel that you want to view through sub picture by pressing the
or
button. Press the ENTER button.
The "Programme" can be active when the sub picture is set to TV.
8. Press the EXIT
button to exit.
You may notice that the picture in the PIP window becomes slightly unnatural when you use the
main screen to view a game or karaoke.
Press the PIP button on the
remote control repeatedly to activate
or deactivate the "PIP".
Source: Used to select a source of the sub picture.
Size: Used to select a size of the sub picture.
Position: Used to move the sub picture.
Programme: Used to Change the sub picture.
Mode : Custom
Equalizer
SRS TSXT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
TV
Setup
More
Home Theatre PC
: Off
Light Effect :
Watching Mode On
Energy Saving : Off
HDMI Black Level : Low
PIP
Mode : Custom
Equalizer
SRS TSXT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
TV
PIP : On
Source : TV
Size :
Position :
Programme : P 1
PIP
O: PIP operates, X: PIP doesn’t operate
Component
HDMI
PC
TV analog
O
O
O
Ext.1
O
O
O
Ext.2
O
O
O
AV
O
O
O
S-Video
X
X
X
Component
X
X
X
HDMI
X
X
X
PC
X
X
X
TV digital
X
X
X
Sub
Main
PIP Settings
Move Enter Return
Move Enter Return
BN68-01166G-03Eng-0518.indd 21 2007-05-21 �� 11:13:14
English - 22
You can select the type of the special sound effect to be used
when watching a given broadcast.
1. Press the MENU button to display the menu.
Press the
or
button to select "Sound", then press the
ENTER button.
2. Press the ENTER
button again, to select "Mode".
3. Select the required sound effect by pressing the
or
button repeatedly and then press the ENTER button.
4. Press the EXIT
button to exit.
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides live and full sound for movies.
Speech: Emphasizes voices over other sounds.
Custom: Selects your custom sound settings.
(Refer to "Adjusting the Sound Settings")
Changing the Sound Standard
Sound
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Sound Select : Main
Reset
TV
Sound
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Sound Select : Main
Reset
Standard
Music
Movie
Speech
Custom
TV
Move Enter Return
Move Enter Return
HDMI Black Level
You can directly select the black level on the screen to adjust
the screen depth.
1. Press the MENU button to display the menu.
Press the or button to select "Setup", then press the
ENTER button.
2. Press the
or
button to select "HDMI Black Level",
then press the ENTER button.
3. Press the or button to select "Normal" or "Low",
then press the ENTER button.
4. Press the EXIT
button to exit.
This function is active only when the external input connects
to HDMI(RGB signals).
TV
Normal: The screen gets brighter.
Low: The screen gets darker.
Mode : Custom
Equalizer
SRS TSXT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
Setup
More
Home Theatre PC
: Off
Light Effect :
Watching Mode On
Energy Saving : Off
HDMI Black Level : Low
PIP
Move Enter Return
Mode : Custom
Equalizer
SRS TSXT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
Setup
More
Home Theatre PC
: Off
Light Effect : Off
Energy Saving : Off
HDMI Black Level : Low
PIP
Move Enter Return
Normal
Low
BN68-01166G-03Eng-0518.indd 22 2007-05-21 �� 11:13:20
English - 24
You can connect a set of headphones to your set if you wish to
watch a TV programme without disturbing the other people in the
room.
When you insert the head set jack into the corresponding port, you
can operate only “SRS TS XT” and “Auto Volume” in Sound menu.
Prolonged use of headphones at a high volume may damage
your hearing.
You will not receive sound from the speakers when you connect headphones to the system.
The headphone volume and TV volume are adjusted differently.
Connecting Headphones
Selecting the Sound Mode
You can also set these options
simply by pressing the DUAL
button on remote control.
You can set the sound mode by pressing the “DUAL” button.
When you press it, the current sound mode is displayed on the screen.
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual
DUAL 1/2
MONO
STEREO ↔ MONO
DUAL 1 ↔ DUAL 2
MONO
MONO ↔ STEREO
MONO ↔ DUAL 1
DUAL 2
Default
DUAL 1
DUAL 1
Automatic
change
Automatic
change
FM
Stereo
NICAM
Stereo
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
Adjusting the Volume Automatically
Each broadcasting station has its own signal conditions, and
so it is not easy for you to adjust the volume every time the
channel is changed. This feature allows you to automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
1. Press the MENU button to display the menu.
Press the or button to select "Sound", then press the
ENTER button.
2. Press the or button to select "Auto Volume", then press
the ENTER
button.
3. Press the or button to select "On" or "Off". Press the
ENTER button.
4. Press the EXIT
button to exit.
Sound
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Sound Select : Main
Reset
Sound
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Sound Select : Main
Reset
Off
On
TV
TV
Move Enter Return
Move Enter Return
BN68-01166G-03Eng-0518.indd 24 2007-05-21 �� 11:13:30
English - 26
Resetting the Sound Settings to the Factory Defaults
If Game Mode is On, the Reset Sound function is activated.
Selecting the Reset function after setting the equalizer resets
the equalizer setting to the factory defaults.
1. Press the MENU button to display the menu.
Press the or button to select "Sound", then press the
ENTER button.
2. Press the or button to select "Reset", then press the
ENTER button.
3. Press the EXIT button to exit.
You can select this option when the "Game Mode" is set to "On".
Sound
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Sound Select : Main
Reset
TV
Move Enter Return
You can set the TV’s clock so that the current time is
displayed when you press the INFO button. You must also set
the time if you wish to use the automatic On/Off timers.
1. Press the MENU button to display the menu.
Press the or button to select "Setup", then press the
ENTER button.
2. Press the or button to select "Time", then press the
ENTER button.
3. Press the ENTER button to select "Clock Set".
4.
5. Press the EXIT
button to exit.
If you disconnect the power cord, you have to set the clock
again.
You can also set Year, Month, Day, Hour and Minute by pressing the number buttons on the
remote control.
Setting and Displaying the Current Time
To...
Move to Month, Day, Year, Hou or Minute
Set the Month, Day, Year, Hou or Minute
Press the ENTER button.
Press the...
or button.
▲ or button.
TV
Clock Set
TV
Setup
Plug & Play
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Off
PC
sMore
Month
01
Day
p
q
01
2007
Year
00
Hour
00
Minute
Move Enter Return
Move Adjust Return
BN68-01166G-03Eng-0518.indd 26 2007-05-21 �� 11:13:40
English - 27
You can select a time period of between 30 and 180 minutes
after which the television automatically switches to standby
mode.
1. Press the MENU button to display the menu.
Press the or button to select "Setup", then press the
ENTER button.
2. Press the or button to select "Time", then press the
ENTER button.
3. Press the or button to select "Sleep Timer", then press
the ENTER button.
4. Press the or button repeatedly until the desired time
appears (Off, 30, 60, 90, 120, 150, 180).
Press the ENTER button.
5. Press the EXIT
button to exit.
The TV automatically switches to standby mode when the
timer reaches 0.
Setting the Sleep Timer
Switching the Television On and Off Automatically
1. Press the MENU button to display the menu.
Press the or button to select "Setup", then press the
ENTER button.
2. Press the or button to select "Time", then press the
ENTER button.
3. Press the or button to select "Timer 1", "Timer 2",
"Timer 3", then press the ENTER button.
4. Press the or buttons to adjust “Hour”, then press the
button to move to the next step.
Set other items using the same method as above.
Activate or Inactivate Press the ▲or▼ button
Repeat
Select a Once, Everyday,
Mon-Fri, Mon-Sat, Sat-Sun
Press the ▲or▼ button
Volume Adjust a 0~100 Press the ▲or▼ button
Programme
Adjust a Programme Press the ▲or▼ button
When finished, press the RETURN button to return.
• The current time will appear every time you press the INFO button.
• You can set the hour, minute, channel, and directly by pressing the number
buttons on the remote control.
5. Press the EXIT
button to exit.
TV
Setup
Plug & Play
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Off
PC
sMore
Move Enter Return
Time
Clock Set : 00 : 00
Sleep Timer :
Timer 1 :
Timer 2 :
Timer 3 :
Off
30
60
90
120
150
180
TV
Move Enter Return
TV
Setup
Plug & Play
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Off
PC
sMore
Move Enter Return
TV
Timer 1
On Time
Repeat
Once
Volume
10 1
Programme
00
5
6
00
Inactivated
:
Off Time
00 00
Inactivated
:
Move Adjust Return
BN68-01166G-03Eng-0518.indd 27 2007-05-21 �� 11:13:45
English - 28
When you start using your set for the first time, you must
select the language which will be used for displaying menus
and indications.
1. Press the MENU button to display the on-screen menu.
Pressthe▲or▼buttontoselect"Setup",thenpressthe
ENTER button.
2. Pressthe▲or▼buttontoselect"Language",thenpress
the ENTER button.
3. Selectaparticularlanguagebypressingthe▲or▼button
repeatedly. Press the ENTER button.
Youcanchooseoneof17languages.
4. Press the EXIT button to exit.
Choosing Your Language
When connecting to a game console such as PlayStation
TM
or Xbox
TM
, you can enjoy a more realistic gaming experience
by selecting game menu.
1. Press the MENU button to display the menu.
Pressthe▲or▼buttontoselect"Setup",thenpressthe
ENTER button.
2. Pressthe▲or▼buttontoselect"GameMode",thenpress
the ENTER button.
3. Pressthe▲or▼buttontoselect"On"or"Off".Pressthe
ENTER button.
4. Press the EXIT button to exit.
Todisconnectthegameconsoleandconnectanotherexternal
device,cancelgamemodeinthesetupmenu
IfyoudisplaytheTVmenuinGamemode,thescreenshakes
slightly.
GameModeisnotavailableinTVmode.
IfGameModeisOn:
•PictureModechangestoStandardandSoundModechangestoCustomautomatically
Theusercannotchangethesetoothermodes.
•SoundModeintheSoundmenuisdeactivated.Adjustthesoundusingtheequalizer.
•TheResetSoundfunctionisactivated.SelectingtheResetfunctionaftersettingtheequalizer
resetstheequalizersettingtothefactorydefaults.
Using Game Mode
TV
Setup
Plug & Play
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Off
PC
sMore
TV
Setup
Plug & Play
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Off
PC
sMore
English
Deutsch
Français
Italiano
Svenska
Español
q
TV
Setup
Plug & Play
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Off
PC
sMore
TV
Setup
Plug & Play
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Off
PC
sMore
Off
On
Move Enter Return
Move Enter Return
Move Enter Return
Move Enter Return
BN68-01166G-03Eng-0623.indd 28 2007-06-23 �� 5:03:38
English - 30
This function adjusts the brightness of the TV so as to reduce
power consumption. When you watching TV at night, set the
"Energy Saving " mode option to "High" so as to reduce the
dazzling of your eyes as well as the power consumption.
1. Press the MENU button to display the on-screen menu.
Press the or button to select "Setup", then press the
ENTER button.
2. Press the or button to select "Energy Saving", then
press the ENTER
button.
3. Select the required option (Off, Low, Medium, High, Auto) by pressing the
▲ or button. Press the ENTER button.
4. Press the EXIT
button to exit.
Using the Energy Saving Feature
You can turn on/off the blue LED on the front of TV according
to the situation. Use it for saving power or when the LED
dazzles your eyes.
1. Press the MENU button to display the on-screen menu.
Press the or button to select "Setup", then press the
ENTER button.
2. Press the ▲ or button to select
"Light Effect", then press
the ENTER button.
3. Select the required option (Off, Standby Mode On,
Watching Mode On, On) by pressing the ▲ or button.
Press the ENTER button.
4. Press the EXIT
button to exit.
Setting the Light Effect
Off: LED will not come on.
Standby Mode On: Turns the LED on in standby mode.
Watching Mode On: Turns the LED on while watching
TV.
On: LED will come on after you turn the TV off.
Mode : Custom
Equalizer
SRS TSXT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
TV
Setup
More
Home Theatre PC
: Off
Light Effect :
Watching Mode On
Energy Saving : Off
HDMI Black Level : Low
PIP
Move Enter Return
Mode : Custom
Equalizer
SRS TSXT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
TV
Setup
More
Home Theatre PC
: Off
Light Effect :
Watching Mode On
Energy Saving : Off
HDMI Black Level : Low
PIP
Move Enter Return
TV
Mode : Custom
Equalizer
SRS TSXT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
TV
Setup
More
Home Theatre PC
: Off
Light Effect : Off
Energy Saving : Off
HDMI Black Level : Low
PIP
Move Enter Return
Off
Standby Mode On
Watching Mode On
On
TV
Mode : Custom
Equalizer
SRS TSXT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Move Enter Return
TV
Setup
More
Home Theatre PC
: Off
Light Effect :
Watching Mode On
Energy Saving :
HDMI Black Level : Low
PIP
Move Enter Return
Off
Low
Medium
High
Auto
[LE23R81, LE26R81, LE23R83, LE26R83]
BN68-01166G-03Eng-0518.indd 30 2007-05-21 �� 11:14:03
1 / 1

Samsung LE-23R81B Uživatelský manuál

Kategorie
LCD televizory
Typ
Uživatelský manuál