Yamaha SHS-500 Návod k obsluze

Značka: Yamaha

Modelka: SHS-500

Typ: Návod k obsluze

Owner’s Manual

Before using the instrument,

be sure to read “PRECAUTIONS” on pages 5–7.

2 SHS-500 Owner’s Manual

For SHS-500

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply

(adapter). DO NOT connect this product to any power supply or

adapter other than one described in the manual, on the name

plate, or specifically recommended by Yamaha.

WARNING: Do not place this product in a position where any-

one could walk on, trip over, or roll anything over power or con-

necting cords of any kind. The use of an extension cord is not

recommended! If you must use an extension cord, the minimum

wire size for a 25’ cord (or less) is 18 AWG. NOTE: The smaller

the AWG number, the larger the current handling capacity. For

longer extension cords, consult a local electrician.

This product should be used only with the components supplied

or; a cart, rack, or stand that is recommended by Yamaha. If a

cart, etc., is used, please observe all safety markings and instruc-

tions that accompany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be correct

at the time of printing. However, Yamaha reserves the right to

change or modify any of the specifications without notice or obli-

gation to update existing units.

This product, either alone or in combination with an amplifier and

headphones or speaker/s, may be capable of producing sound

levels that could cause permanent hearing loss. DO NOT operate

for long periods of time at a high volume level or at a level that is

uncomfortable. If you experience any hearing loss or ringing in

the ears, you should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time period

before damage occurs.

Some Yamaha products may have benches and / or accessory

mounting fixtures that are either supplied with the product or as

optional accessories. Some of these items are designed to be

dealer assembled or installed. Please make sure that benches

are stable and any optional fixtures (where applicable) are well

secured BEFORE using.

Benches supplied by Yamaha are designed for seating only. No

other uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating to

how a function or effect works (when the unit is operating as

designed) are not covered by the manufacturer’s warranty, and

are therefore the owners responsibility. Please study this manual

carefully and consult your dealer before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and

environmentally friendly. We sincerely believe that our products

and the production methods used to produce them, meet these

goals. In keeping with both the letter and the spirit of the law, we

want you to be aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery

which (if applicable) is soldered in place. The average life span of

this type of battery is approximately five years. When replace-

ment becomes necessary, contact a qualified service representa-

tive to perform the replacement.

This product may also use “household” type batteries. Some of

these may be rechargeable. Make sure that the battery being

charged is a rechargeable type and that the charger is intended

for the battery being charged.

When installing batteries, never mix old batteries with new ones,

and never mix different types of batteries. Batteries MUST be

installed correctly. Mismatches or incorrect installation may result

in overheating and battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep all

batteries away from children. Dispose of used batteries promptly

and as regulated by the laws in your area. Note: Check with any

retailer of household type batteries in your area for battery dis-

posal information.

Disposal Notice:

Should this product become damaged beyond repair, or for some

reason its useful life is considered to be at an end, please

observe all local, state, and federal regulations that relate to the

disposal of products that contain lead, batteries, plastics, etc. If

your dealer is unable to assist you, please contact Yamaha

directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The

model number, serial number, power requirements, etc., are

located on this plate. You should record the model number, serial

number, and the date of purchase in the spaces provided below

and retain this manual as a permanent record of your purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

92-BP (bottom)

* This applies only to products distributed by Yamaha Corporation of America.

COMPLIANCE INFORMATION STATEMENT

(DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620

Telephone : 714-522-9011

Type of Equipment : Digital Keyboard

Model Name : SHS-500

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including interference that may cause undesired operation.

See user manual instructions if interference to radio reception is suspected.

(FCC DoC)

SHS-500 Owner’s Manual 3

For AC adaptor and SHS-500

1. IMPORTANT NOTICE: DO NOT MODIFY THIS

UNIT!

This product, when installed as indicated in the instructions

contained in this manual, meets FCC requirements. Modifica-

tions not expressly approved by Yamaha may void your

authority, granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories

and/or another product use only high quality shielded cables.

Cable/s supplied with this product MUST be used. Follow all

installation instructions. Failure to follow instructions could

void your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply

with the requirements listed in FCC Regulations, Part 15 for

Class “B” digital devices. Compliance with these requirements

provides a reasonable level of assurance that your use of this

product in a residential environment will not result in harmful

interference with other electronic devices. This equipment

generates/uses radio frequencies and, if not installed and

used according to the instructions found in the users manual,

may cause interference harmful to the operation of other elec-

tronic devices. Compliance with FCC regulations does not

guarantee that interference will not occur in all installations. If

this product is found to be the source of interference, which

can be determined by turning the unit “OFF” and “ON”, please

try to eliminate the problem by using one of the following mea-

sures:

Relocate either this product or the device that is being affected

by the interference.

Utilize power outlets that are on different branch (circuit

breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead,

change the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory

results, please contact the local retailer authorized to distribute

this type of product. If you can not locate the appropriate

retailer, please contact Yamaha Corporation of America, Elec-

tronic Service Division, 6600 Orangethorpe Ave, Buena Park,

CA90620

The above statements apply ONLY to those products distrib-

uted by Yamaha Corporation of America or its subsidiaries.

FCC INFORMATION (U.S.A.)

* This applies only to products distributed by Yamaha Corporation of America. (class B)

4 SHS-500 Owner’s Manual

For AC adaptor

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol

within an equilateral triangle is intended to alert

the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the product.

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s

instructions.

8 Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9 Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has

two blades with one wider than the other. A

grounding type plug has two blades and a third

grounding prong. The wide blade or the third

prong are provided for your safety. If the

provided plug does not fit into your outlet,

consult an electrician for replacement of the

obsolete outlet.

10 Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11 Only use attachments/accessories specified by

the manufacturer.

12 Use only with the cart,

stand, tripod, bracket, or

table specified by the

manufacturer, or sold with

the apparatus. When a cart

is used, use caution when

moving the cart/apparatus

combination to avoid

injury from tip-over.

13 Unplug this apparatus during lightning storms

or when unused for long periods of time.

14 Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way, such

as power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or

has been dropped.

(UL60065_03)

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

SHS-500 Owner’s Manual 5

PRECAUTIONS

PLEASE READ CAREFULLY

BEFORE PROCEEDING

Please keep this manual in a safe and

handy place for future reference.

WARNING

• This AC adaptor is designed for use with only

Yamaha electronic instruments. Do not use for

any other purpose.

• Indoor use only. Do not use in any wet

environments.

CAUTION

• When setting up, make sure that the AC outlet

is easily accessible. If some trouble or

malfunction occurs, immediately turn off the

power switch of the instrument and disconnect

the AC adaptor from the outlet. When the AC

adaptor is connected to the AC outlet, keep in

mind that electricity is flowing at the minimum

level, even if the power switch is turned off.

When you are not using the instrument for a

long time, make sure to unplug the power cord

from the wall AC outlet.

WARNING

Always follow the basic precautions listed

below to avoid the possibility of serious

injury or even death from electrical shock,

short-circuiting, damages, fire or other

hazards. These precautions include, but

are not limited to, the following:

Power supply/AC adaptor

• Do not place the power cord near heat

sources such as heaters or radiators. Also, do

not excessively bend or otherwise damage the

cord, or place heavy objects on it.

• Only use the voltage specified as correct for

the instrument. The required voltage is printed

on the name plate of the instrument.

• Use the specified adaptor (page 35) only.

Using the wrong adaptor can result in damage

to the instrument or overheating.

• Check the electric plug periodically and

remove any dirt or dust which may have

accumulated on it.

Do not open

• This instrument contains no user-serviceable

parts. Do not open the instrument or attempt to

disassemble or modify the internal

components in any way. If it should appear to

be malfunctioning, discontinue use

immediately and have it inspected by qualified

Yamaha service personnel.

Location (if Bluetooth

functionality is included)

(For information on whether Bluetooth

functionality is included or not, refer to page 9.)

• Radio waves may affect electro-medical

devices.

- Do not use this product near medical

devices or inside areas in which the use of

radio waves is restricted.

- Do not use this product within 15 cm (6 in.) of

persons with a heart pacemaker implant.

Water warning

• Do not expose the instrument to rain, use it

near water or in damp or wet conditions, or

place on it any containers (such as vases,

bottles or glasses) containing liquids which

might spill into any openings. If any liquid such

as water seeps into the instrument, turn off the

power immediately and unplug the power cord

from the AC outlet. Then have the instrument

For AC adaptor

For the instrument

DMI-5 1/3

6 SHS-500 Owner’s Manual

inspected by qualified Yamaha service

personnel.

• Never insert or remove an electric plug with

wet hands.

Fire warning

• Do not put burning items, such as candles, on

the unit.

A burning item may fall over and cause a fire.

Battery

• Follow the precautions below. Failure to do so

might result in explosion, fire, overheating or

battery fluid leakage.

- Do not tamper with or disassemble batteries.

- Do not dispose of batteries in fire.

- Do not attempt to recharge batteries that are

not designed to be charged.

- Keep the batteries separate from metallic

objects such as necklaces, hairpins, coins,

and keys.

- Use the specified battery type (page 35)

only.

- Use new batteries, all of which are the same

type, same model, and made by the same

manufacturer.

- Always make sure all batteries are inserted in

conformity with the +/- polarity markings.

- When the batteries run out, or if the

instrument is not to be used for a long time,

remove the batteries from the instrument.

- When using Ni-MH batteries, follow the

instructions that came with the batteries. Use

only the specified charger device when

charging.

• Keep batteries away from small children who

might accidentally swallow them.

• If the batteries do leak, avoid contact with the

leaked fluid. If the battery fluid should come in

contact with your eyes, mouth, or skin, wash

immediately with water and consult a doctor.

Battery fluid is corrosive and may possibly

cause loss of sight or chemical burns.

If you notice any abnormality

• When one of the following problems occur,

immediately turn off the power switch and

disconnect the electric plug from the outlet. (If

you are using batteries, remove all batteries

from the instrument.) Then have the device

inspected by Yamaha service personnel.

- The power cord or plug becomes frayed or

damaged.

- It emits unusual smells or smoke.

- Some object has been dropped into the

instrument.

- There is a sudden loss of sound during use

of the instrument.

CAUTION

Always follow the basic precautions listed

below to avoid the possibility of physical

injury to you or others, or damage to the

instrument or other property. These

precautions include, but are not limited to,

the following:

Power supply/AC adaptor

• Do not connect the instrument to an electrical

outlet using a multiple-connector. Doing so

can result in lower sound quality, or possibly

cause overheating in the outlet.

• When removing the electric plug from the

instrument or an outlet, always hold the plug

itself and not the cord. Pulling by the cord can

damage it.

• Remove the electric plug from the outlet when

the instrument is not to be used for extended

periods of time, or during electrical storms.

Location

• Do not place the instrument in an unstable

position where it might accidentally fall over.

• Before moving the instrument, remove all

connected cables, to prevent damage to the

cables or injury to anyone who might trip over

them.

DMI-5 2/3

SHS-500 Owner’s Manual 7

• When setting up the product, make sure that

the AC outlet you are using is easily

accessible. If some trouble or malfunction

occurs, immediately turn off the power switch

and disconnect the plug from the outlet. Even

when the power switch is turned off, electricity

is still flowing to the product at the minimum

level. When you are not using the product for a

long time, make sure to unplug the power cord

from the wall AC outlet.

Connections

• Before connecting the instrument to other

electronic components, turn off the power for

all components. Before turning the power on

or off for all components, set all volume levels

to minimum.

• Be sure to set the volumes of all components

at their minimum levels and gradually raise the

volume controls while playing the instrument to

set the desired listening level.

Handling caution

• Do not insert a finger or hand in any gaps on

the instrument.

• Never insert or drop paper, metallic, or other

objects into the gaps on the panel or

keyboard. This could cause physical injury to

you or others, damage to the instrument or

other property, or operational failure.

• Do not rest your weight on, or place heavy

objects on the instrument, and do not use

excessive force on the buttons, switches or

connectors.

• Do not use the instrument/device or

headphones for a long period of time at a high

or uncomfortable volume level, since this can

cause permanent hearing loss. If you

experience any hearing loss or ringing in the

ears, consult a physician.

• When using a strap, make sure the strap is

securely attached to the instrument.

• Do not lift the instrument by the strap. It can

cause serious injury or damage to the

instrument.

• Do not treat the instrument in a rough manner

such as swinging it about, etc. The strap on

the instrument may detach causing

unexpected accidents such as the instrument

dropping, etc., or injuring persons close by.

Always turn the power off when the instrument is

not in use.

Even when the [ ] (Standby/On) switch is in

standby status (display is off), electricity is still

flowing to the instrument at the minimum level.

When you are not using the instrument for a long

time, make sure you unplug the power cord from

the wall AC outlet.

Make sure to discard used batteries according to

local regulations.

Yamaha cannot be held responsible for

damage caused by improper use or

modifications to the instrument, or data that

is lost or destroyed.

DMI-5 3/3

The model number, serial number, power requirements, etc., may be found on or near the name

plate, which is at the bottom of the unit. You should note this serial number in the space provided

below and retain this manual as a permanent record of your purchase to aid identification in the

event of theft.

Model No.

Serial No.

(bottom_en_01)

8 SHS-500 Owner’s Manual

NOTICE

To avoid the possibility of malfunction/ damage

to the product, damage to data, or damage to

other property, follow the notices below.

 Handling

• Do not use the instrument in the vicinity of a

TV, radio, stereo equipment, mobile phone, or

other electric devices. Otherwise, the

instrument, TV, or radio may generate noise.

When you use the instrument along with an

application on your iPad, iPhone or iPod

touch, we recommend that you set “Airplane

Mode” to “ON” on the device and then the

Bluetooth

setting to “ON” in order to avoid

noise caused by communication.

• Do not expose the instrument to excessive

dust or vibrations, or extreme cold or heat

(such as in direct sunlight, near a heater, or in

a car during the day) to prevent the possibility

of panel disfiguration, damage to the internal

components or unstable operation. (Verified

operating temperature range: 5° – 40°C, or

41° – 104°F.)

• Do not place vinyl, plastic or rubber objects

on the instrument, since this might discolor

the panel or keyboard.

 Maintenance

• When cleaning the instrument, use a soft and

dry cloth. Do not use paint thinners, solvents,

alcohol, cleaning fluids, or chemical-

impregnated wiping cloths.

 Saving data

• Some of the data of this instrument (page 32)

are retained when the power is turned off.

However, the saved data may be lost due to

some failure, an operation mistake, etc.

Information

 About copyrights

• Copying of the commercially available

musical data including but not limited to MIDI

data and/or audio data is strictly prohibited

except for your personal use.

• This product incorporates and bundles

contents in which Yamaha owns copyrights or

with respect to which Yamaha has license to

use others’ copyrights. Due to copyright laws

and other relevant laws, you are NOT allowed

to distribute media in which these contents

are saved or recorded and remain virtually

the same or very similar to those in the

product.

* The contents described above include a

computer program, Accompaniment Style

data, MIDI data, WAVE data, voice

recording data, a score, score data, etc.

* You are allowed to distribute medium in

which your performance or music

production using these contents is

recorded, and the permission of Yamaha

Corporation is not required in such cases.

 About this manual

• The illustrations and LCD screens as shown

in this manual are for instructional purposes

only, and may appear somewhat different

from those on your instrument.

• The letters at the end of the model name (“B”

or “RD”) are color information of the

instrument. For example, “B” indicates

“black,” and “RD” indicates “red.” Since they

simply indicate the color, these letters are

omitted in this manual.

• iPhone, iPad, iPod touch and Lightning are

trademarks of Apple Inc., registered in the

U.S. and other countries.

• Android™ is a trademark of Google LLC.

• IOS is a trademark or registered trademark of

Cisco in the U.S. and other countries and is

used under license.

• The Bluetooth

word mark and logos are

registered trademarks owned by Bluetooth

SIG, Inc. and any use of such marks by

Yamaha Corporation is under license.

• The company names and product names in

this manual are the trademarks or registered

trademarks of their respective companies.

 About Bluetooth

• For information on handling Bluetooth

communications, refer to “About Bluetooth”

on pages 9 and 37.

SHS-500 Owner’s Manual 9

Compatible Formats

GM System Level 1

“GM System Level 1” is an addition to the MIDI standard which ensures that any GM-

compatible music data can be accurately played by any GM-compatible tone generator,

regardless of manufacturer.

About Bluetooth

Bluetooth capability

Depending on the country in which you purchased the product, the instrument may not have

Bluetooth capability. If the Bluetooth icon is displayed in the upper right corner of the display as

illustrated above, or the value “BLE MIDI” (Bluetooth MIDI) is selectable in the lower of the display,

this means that the product is equipped with Bluetooth functionality.

To confirm that the value “BLE MIDI” is selectable or not, press the [FUNCTION] button repeatedly

to call up the Function menu “MIDI Select” in the upper of the display, then rotate the [SELECT]

knob to select the value in the bottom of the display.

Keep in mind that it is only MIDI data, and not audio data, that can be received and transmitted by

this instrument via Bluetooth.

[FUNCTION] button

[SELECT] knob

Display

Function menu

Value

Bluetooth icon

Display

10 SHS-500 Owner’s Manual

Thank you for purchasing the keytar Yamaha Digital Keyboard!

The keytar not only lets you enjoy playing the keyboard—even strapped around your

shoulder like a guitar—but also gives you powerful tools for effortlessly playing along with

your favorite music, by connecting to the smart device app “Chord Tracker.”

We recommend that you read this manual carefully so that you can fully take advantage of

the advanced and convenient functions of the instrument.

We also recommend that you keep this manual in a safe and handy place for future

reference.

This instrument has the following documents and instructional materials.

Owner’s Manual (this book)

Explains how to get started with the instrument and how to use main feature

Jam function. For more detailed information, refer to online manual “Reference

Manual” below.

Reference Manual (Online Manual)

Provides more detailed information.

To obtain online manual (PDF), access the Yamaha Downloads website, then enter the

model name for searching the desired files.

• Owner’s Manual x1

•AC Adaptor* x1

•Strap x1

• MIDI breakout cable x1

• Online Member Product Registration x1

* May not be included depending on your particular area. Please check with your Yamaha dealer.

About the Manuals

Yamaha Downloads

https://download.yamaha.com/

Included Accessories

SHS-500 Owner’s Manual 11

Contents

Features .............................................................................................................. 11

Functions of Panel Components ..................................................................... 12

Setting Up ........................................................................................................... 16

Try Playing a Variety of Instrument Voices ..................................................... 21

Enjoy Playing with the Jam Function............................................................... 23

Backup and Initialization ................................................................................... 32

Troubleshooting ................................................................................................. 33

Specifications ..................................................................................................... 34

Index .................................................................................................................... 36

Features

Amazingly easy and powerful performance functions .......................... page 23

With the Jam Function, you can instantly enjoy playing along with your favorite songs. Simply connect

the instrument with the free app “Chord Tracker” and play along with songs stored to your smart

device. No matter which keys you press, the notes automatically match the song, so you don’t have to

worry about fingering or even knowing the proper scales and chords. You can simply lose yourself in

the performance, just as if you were jamming with your favorite artist.

For information on devices that are compatible with “Chord Tracker,” check the Yamaha website.

Control interface for authentic playing ........................................... pages 15, 22

In addition to a Pitch Bend wheel and Modulation wheel, the instrument also features knobs that let

you control a wide range of effects, giving you extraordinarily expressive, dynamic performance

power.

Slim and ultra-lightweight body

An ultralight body weighing only 1.5 kg and slim form make the instrument easily portable. It can also

be used on battery power, letting you enjoy playing anywhere you want.

12 SHS-500 Owner’s Manual

Functions of Panel Components

DC IN jack (page 17)

For connecting the AC adaptor.

[VOLUME] dial (page 19)

For adjusting the overall volume.

[ ] (Standby/On) switch (page 19)

For turning the power on or setting it to standby.

[LINE OUT] jack (1/4" mono phone)

For connecting a powered speaker or a mixing console for playing in larger venues at higher

volumes (with 1/4" mono phone plug). To control the LINE OUT volume, adjust the volume of the

connected audio equipment.

NOTICE

To avoid possible damage, first turn on the power to the instrument, then to the external device. When

turning off the power, first turn off the power to the external device, then to the instrument.

[AUX IN] jack (3.5 mm, mini stereo phone)

For inputting the sound of an audio player and listening to it through the built-in speaker of the

instrument (with 3.5 mm, mini stereo phone plug). To adjust the input volume from [AUX IN] jack,

adjust the audio playback volume on the audio device.

NOTICE

To avoid damage to the devices, first turn on the power to the external device, then to the instrument.

When turning off the power, first turn off the power to the instrument, then to the external device.

(Bottom of the unit)

SHS-500 Owner’s Manual 13

[TO HOST] terminal (page 28)

For connecting a computer or a smart device by using a USB cable, in order to transmit/receive

MIDI data or audio data (using the USB audio interface function). For details on the USB audio

interface function, refer to the “Reference Manual.” When transmitting/receiving MIDI data, you

may need to call up the Function settings (see “MIDI transmission/reception” below).

[MIDI] terminal

For connecting other MIDI devices via the included MIDI breakout cable and standard MIDI

cables (sold separately). When transmitting/receiving MIDI data, you may need to call up the

Function settings (see “MIDI transmission/reception” below).

[SELECT] knob (page 21)

For selecting a Voice to play on the keyboard. The selected Voice name will be shown in the

display.

While the [FUNCTION] button indicator is lit, this knob works as a value selector for the Function.

[EFFECT] selector (page 22)

For selecting the effect which is applied to the Voice. This selector is used in conjunction with the

[EFFECT CONTROL] knob.

[EFFECT CONTROL] knob (page 22)

For setting the value of the effect which is selected by [EFFECT] selector. Turning the knob

clockwise increases the depth of the effect.

MIDI transmission/reception

Make sure to match the MIDI transmit/receive port as well as the value of the Function “MIDI Select” setting. Press the

[FUNCTION] button repeatedly to call up “MIDI Select” at the top of the display, then rotate the [SELECT] knob to

select an appropriate value at the bottom: “BLE MIDI” (Bluetooth), “USB MIDI” (TO HOST) or “MiniMIDI” (MIDI).

Connection example

Connect to your smart device by Bluetooth or by the USB cable. Confirm Bluetooth availability on

page 9, and then refer to pages 27 and 28.

SHS-500

PHONES

MIDI

MIDI IN

MIDI OUT

TO HOST

LINE OUT

AUX IN

Smart device

Headphones

Audio player

Powered speaker

MIDI device

MIDI breakout cable

MIDI OUT

terminal

MIDI IN

terminal

14 SHS-500 Owner’s Manual

Display

Current settings are shown in the display.

[PHONES] jack

For connecting a pair of stereo headphones with a mini stereo phone plug (3.5 mm). The

instrument’s built-in speakers automatically stop producing sound when headphones are

connected to this jack. However, the [LINE OUT] jack will continue to output the same sound as

the [PHONES] jack.

CAUTION

To prevent hearing loss, avoid using headphones at high volumes for extended periods of time.

[OCTAVE] buttons [-][+]

For shifting the pitch of the keyboard up or down by one octave. Pressing simultaneously resets to

the default setting. The current setting is shown in the display.

[TRANSPOSE] buttons [-][+]

For transposing the pitch of the keyboard up or down (in semitones). Pressing simultaneously

resets to the default setting. The current setting is shown in the display.

Normally indicates the Voice name

Transpose

T-1: down in semitone units

T±0: no change in pitch

T+1: up in semitone units

Octave

O-1: 1 octave down

O±0: no change in pitch

O+1: 1 octave up

MIDI Select

USB connection

MIDI connection

Power

(Adaptor or remaining battery

power indication)

Bluetooth connection

SHS-500 Owner’s Manual 15

[ ] (Fast Reverse), [ / ] (Play/Pause), [ ] (Fast Forward)

When not connected to app: These are playback control buttons for the internal demo songs

(page 24).

When connected to app “Chord Tracker”: These are playback control buttons for the app to

play/pause a song in the smart device (page 29).

[JAM] button (page 29)

With each button press, this turns the Jam function on (indicator lights), selects the Jam mode in

order, and then turns off the Jam function (indicator goes off).

[SUSTAIN] button

While holding down this button, the notes you play have a longer sustain.

[PITCH] bend wheel

For adding smooth pitch variations to notes you play on the

keyboard. Roll the wheel upward to raise the pitch, or downward to

lower the pitch.

[MODULATION] wheel

For applying a vibrato effect to notes played on the keyboard. Roll

the wheel upward to increase the effect depth, or downward to

minimize it. The [MODULATION] wheel can also be used to control the effect depth in the same

way as the [EFFECT CONTROL] knob ( ), if you set it via the Function mode. For the operation,

see the NOTE at the bottom of page 22.

[FUNCTION] button

Enter the Function mode (indicator lights). The Function mode enables you to set various settings

such as Tuning and MIDI channel selection. For details, refer to the online manual “Reference

Manual” described on page 10.

How to set: Press the [FUNCTION] button repeatedly to call up the desired Function menu in the

upper of the display, then rotate the [SELECT] knob ( ) to select its value in the bottom of the

display.

To exit from the Function mode, press [EXIT] button ( ) (indicator goes off).

NOTE

The last Function setting selected here is conveniently memorized when you exit the Function mode and

automatically recalled when you re-enter the mode.

[EXIT] button

Exits from the Function mode.

Function name

Value

16 SHS-500 Owner’s Manual

Setting Up

Attach the included strap securely to the strap pins of the instrument as illustrated below.

Since the strap has an adjuster, you can adjust the strap as you like.

CAUTION

• This strap is designed for use with only this instrument. Do not use for any other purpose.

• When using a strap, make sure the strap is securely attached to the instrument.

• Do not lift the instrument by the strap. Doing so can cause damage to the instrument or injury.

• Never loosen the screws mounting the strap pins.

Attach the Strap

Adjuster

SHS-500 bottom

Strap pin

Strap

SHS-500 Owner’s Manual 17

This instrument can be powered by either an AC adaptor or batteries.

Using an AC Adaptor

Connect the AC adaptor in the order shown in the illustration.

WARNING

• Use the specified AC adaptor (page 35) only. Using the wrong AC

adaptor can result in damage to the instrument or overheating.

• When using the AC adaptor with a removable plug, make sure to keep

the plug attached to the AC adaptor. Using the plug alone can cause

electric shock or fire.

• Never touch the metallic section when attaching the plug. To avoid

electric shock, short circuit or damage, also be careful that there is no

dust between the AC adaptor and plug.

CAUTION

When setting up the product, make sure that the AC outlet you are using is

easily accessible. If some trouble or malfunction occurs, immediately turn

the power off and disconnect the plug from the outlet.

NOTE

Follow the order shown above in reverse when disconnecting the AC adaptor.

Power Requirements

DC IN jack

Bottom of the instrument

AC outlet

AC adaptor

Plug

Slide the plug as indicated.

The shape of the plug differs

depending on your area.

18 SHS-500 Owner’s Manual

Using Batteries

This instrument requires six “AA” size, Alkaline (LR6)/ Manganese (R6) batteries, or rechargeable

nickel-metal hydride batteries (rechargeable Ni-MH batteries).

1. Make sure that the power of the instrument is off.

2. Open the battery compartment cover located on the instrument’s bottom panel.

3. Insert the six new batteries, being careful to follow the polarity markings on the

inside of the compartment.

4. Replace the compartment cover, making sure that it locks firmly in place.

NOTICE

• Connecting or disconnecting the power adaptor with batteries installed may turn the power off,

resulting in loss of data.

• When battery power becomes too low for proper operation, the volume may be reduced, the sound

may be distorted, and other problems may occur. When this happens, make sure to replace all

batteries with new ones or already recharged ones.

NOTE

• This instrument cannot be used to charge the batteries. Use only the specified charger device when

charging.

• Power will be automatically drawn from the AC adaptor if an AC adaptor is connected while batteries are

installed in the instrument.

Setting the battery type

Depending on the battery type to be used, you may need to change the battery type setting on this

instrument. To change the setting, first turn on the power to the instrument, then choose the battery

type you would like to use. Alkaline and manganese batteries are chosen by default. Press the

[FUNCTION] button repeatedly to select “Battery,” then rotate the [SELECT] knob to select the

battery type “Alkaline” (Alkaline and manganese batteries) or “Ni-MH” (rechargeable Ni-MH

batteries).

NOTICE

Failure to set the battery type may shorten the amount of the battery life. Make sure to set the battery type

correctly.

SHS-500 Owner’s Manual 19

1. Turn down the [VOLUME] dial to the minimum.

2. Press the [ ] (Standby/On) switch to turn the power on.

The product name appears in the display, followed by the normal display.

Adjust the volume as desired while playing the keyboard.

CAUTION

Do not use the instrument or headphones for a long period of time at a high or uncomfortable volume

level, since this can cause permanent hearing loss.

NOTICE

While turning on the power, do not attempt any other operations, such as pressing the keys. Doing so

may cause the instrument to malfunction.

3. Press and hold the [ ] (Standby/On) switch for about a second to turn the power

off.

CAUTION

Even when the power switch is turned off, electricity is still flowing to the product at the minimum level.

When you are not using the product for a long time, make sure to unplug the power cord from the wall AC

outlet.

Turning the Power On/Standby

If the overall volume is low, or no sound is heard, please confirm “Troubleshooting” on page 33

Maximum

Minimum

Power On

Turn the Volume to minimum

Display

20 SHS-500 Owner’s Manual

Power status

You can confirm the power source at the right corner of the display.

Setting the Auto Power Off function

To prevent unnecessary power consumption, this instrument features an Auto Power Off function that

automatically turns the power off if the instrument is not operated for a specified period of time. The

amount of time that elapses before the power is automatically turned off is 30 minutes by default;

however, you can change the setting via Function (For details, refer to the Reference Manual).

Disabling Auto Power Off

1. When the instrument is turned on, turn off the power.

2. Turn the power on while holding down the lowest key on the keyboard.

A message “AutoOff Disabled” appears briefly.

Enabling Auto Power Off

To enable the Auto Power Off function, change the setting via the Function mode or initialize the

instrument (page 32).

NOTICE

• Some of the data of this instrument (page 32) are retained when the power is turned off.

• If your instrument is connected to other equipment such as amplifiers and speakers but you do not intend

to use it for 30 minutes, we recommend that you turn off all devices as described in their owner’s manuals.

Doing so eliminates the risk of damage to the other equipment. If you do not want the instrument to turn off

automatically when connected to other equipment, disable the Auto Power Off function.

AC adaptor Batteries: full Batteries: half

Replace soon.

Batteries: low

Power will turn off.

Stránka se načítá ...

Yamaha SHS-500 Návod k obsluze

Značka: Yamaha

Modelka: SHS-500

Typ: Návod k obsluze

Stáhnout PDF

zpráva

v jiných jazycích

polski: Yamaha SHS-500 Instrukcja obsługi
español: Yamaha SHS-500 El manual del propietario
italiano: Yamaha SHS-500 Manuale del proprietario
Deutsch: Yamaha SHS-500 Bedienungsanleitung
svenska: Yamaha SHS-500 Bruksanvisning
português: Yamaha SHS-500 Manual do proprietário
français: Yamaha SHS-500 Le manuel du propriétaire
Türkçe: Yamaha SHS-500 El kitabı
English: Yamaha SHS-500 Owner's manual
dansk: Yamaha SHS-500 Brugervejledning
русский: Yamaha SHS-500 Инструкция по применению
suomi: Yamaha SHS-500 Omistajan opas
Nederlands: Yamaha SHS-500 de handleiding
română: Yamaha SHS-500 Manualul proprietarului

Yamaha SHS-500 Návod k obsluze

Yamaha SHS-500 Návod k obsluze

v jiných jazycích

Související papíry

Jiné dokumenty