ROSIERES RBLP230 Návod k obsluze

Typ
Návod k obsluze
INSTRUCTION MANUAL
GB
1
Dear customer,
Before placing your new refrigerator/freezer into operation please read these
operating instructions carefully. They contain important information for safe use, for
installation and for care of the appliance.
Please keep these operating instructions for future reference. Pass them on to
possible new owners of the appliance.
Notes which are important for your safety or for the proper functioning of the
appliance are stressed with a warning triangle and/or with signal words (Warning!,
Caution!, Important! ). Please observe the following carefully.
Supplementary information regarding operation and practical applications of the
appliance appear after this symbol.
Tips and notes concerning economical and environmentally sound use of the
appliance are marked with the cloverleaf.
The operating instructions contain instructions for the correction of possible
malfunctions by the user in the section @Trouble shooting@. If these instructions
should not be sufficient, contact your local Service Force Center.
Printed on paper manufactured with environmentally sound processes he who thinks
ecologically acts accordingly...
GB
2
Contents
Important safety instructions....................................................................................................3
Remove transport packaging....................................................................................................5
Installation......................................................................................................................................5
Building in......................................................................................................................................5
Reversing the door ......................................................................................................................6
Positioning.....................................................................................................................................7
Description of the appliance .....................................................................................................7
Starting up and temperature regulation.................................................................................7
Interior accessories.....................................................................................................................8
Cleaning and Care .......................................................................................................................9
Trouble shooting ..........................................................................................................................9
Noises during Operation..........................................................................................................11
Disposal of the appliance ........................................................................................................11
Energy Saving tips
…………………………………………………………………..12
Regulations, Standards, Guidelines
………………………………………………...12
GB
3
Important safety instructions
These warnings are provided in the interests of your safety. Ensure you fully
understand them before installing or using the appliance.
Your safety is not paramount importance. If you are unsure about the meaning
of these warnings contact the Customer Care Department for assistance.
Intended use
The refrigerator is intended for use in the home. It is suitable for the storage of food
at low temperature. If the appliance is used for purposes other than those intended or
used incorrectly, no liability can be accepted by the manufacturer for any damage
that may be caused.
Alterations or changes to the refrigerator are not permitted for reasons of safety.
If you use the refrigerator in a commercial application or for purposes other than the
cooling of foods, the manufacturer accepts no liability for any damages that may
occur.
Prior to initial start-up
Check the appliance for transport damage. Under no circumstances should a
damaged appliance be plugged in. In the event of damage, please contact your
supplier.
Refrigerant
Refrigerant gas is contained within the refrigerant circuit of the appliance. Ensure that
none of the components of the refrigerant circuit becomes damaged during
transportation and installation.
During transportation and installation of the appliance, be certain that none of the
components of the refrigerant circuit become damaged.
If the refrigerant circuit should become damaged:
avoid open flames and sources of ignition, thoroughly ventilate the room in which the
appliance is situated.
The instructions shall include the warnings:
WARNING—Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
WARNING—Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
WARNING—Do not damage the refrigerant circuit.
WARNING—Do not use electrical appliances inside the food storage compartments
of the recommended by the manufacturer.
WARNINGThis appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience and
GB
4
knowledge, unless they have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
WARNINGThis appliance is not intended for use by young children or infirm persons
unless they have been adequately supervised by a responsible person to ensure that
they can use the appliance safely .Young children should be supervised to ensure that
they do not play with the appliance.
WARNING—Please keep the appliance away from substance, which can cause
ignition.
WARNINGif the supply cord is damaged, it must be replaced by a special cord or
assembly available from the manufacturer or its service agent.
WARNING---before obtaining access to terminals, all supply circuits must be
disconnected.
WARNING---Please remove the door before you dispose your refrigerant.
Safety of children
Packaging (e.g. wraps, polystyrene) can be dangerous for children.
There is a risk of suffocation! Keep packaging material away from children!
Make old appliances unusable prior to disposal. Pull out the mains plug, cut off the
mains cable, break or remove spring or bolt catches, if fitted. By doing this you
ensure that children cannot lock themselves in the appliance when playing (there is
risk of suffocation!) or get themselves into other dangerous situations.
Often children cannot recognize the hazards present in household appliances. It is
therefore important that you ensure adequate supervision and never let children play
with the appliance!
Daily Operation
Containers with flammable gases or liquids can leak at low temperatures. There is a
risk of an explosion! Do not store any containers with flammable materials such as
spray cans, fire extinguisher refill cartridges etc in the refrigerator and/or freezer.
Do not operate any electrical appliances in the refrigerator and/or freezer (e.g.
electric ice cream makers, mixers etc.).
Before cleaning the appliance, always switch off the appliance and unplug it, or pull
the house fuse or switch off the circuit breaker.
When unplugging always pull the plug from the mains socket, do not pull on the cable.
In case of malfunction
If a malfunction occurs on the appliance, please look first in the ĀTrouble
shootingā section of these instructions. If the information given there does not help,
please do not perform any further repairs yourself.
Under no circumstance should you attempt to repair the appliance yourself. Repairs
GB
5
carried out by inexperienced persons may cause injury or serious malfunctioning.
Remove transport packaging
The appliance and the interior fittings are protected for transportation. Pull off the
adhesive tape on the left and right side of the door. You can remove any remnants of
adhesive using white spirit. Remove all adhesive tape and packing pieces from the
interior of the appliance.
Installation
Installation Location
Before installing, carefully read the instruction in the end in order to avoid a
certain number of problems.
Warning: to avoid a hazard due to instability of the appliance, it must be fixed
according to the instructions:
Building in
Dimensions of the recess
Height of housing mm 1225
Depth of housing mm 550
Width of housing mm 560
It is necessary that the cabinet has a
ventilation recess with the following
dimensions :
Depth 50mm
Width 540 mm
For appropriate venting, follow
indications in the figure.
1. Push the appliance into the
housing until stop strip (A)
touches the kitchen unit.
2.Press in the joint covers between
the appliance and the kitchen
GB
6
furniture (only on the side without
hinge)
3. Open the door and push the
appliance against the side of kitchen
furniture opposite to that of
appliance hinges. Fasten the
appliance with 6 screws provided in
the kit included with the appliance.
Snap hinge cover (D) into position.
4.Apply blanking covers (B) as
indicated.
5. Separate parts A,B,C,D as shown
in the figure.
6. Place guide (A) on the side part of
the furniture door, up and down as
shown in the figure and mark the
position of external holes. After
having drilled holes, fix the guide
with the screws supplied.
7. Fix cover ( C ) on guide (A) until it
clips into place.
8. Open the appliance door and the
furniture door at 90é.Insert the
small square (B) into guide (A) .Push
together the appliance door and the
GB
7
furniture door and mark the holes as
indicated in the figure remove the
squares and drill holes with 2 mm
at 8 mm from the outer edge of the
door . Place the small square on the
guide again and fix it with the screws
supplied.
9. Should the lining up of the
furniture door be necessary , use the
clearance of slots .At the end of
operations, it is necessary to check
the door of the furniture closes
properly.
10. Fix cover (D) on guide (B) until it
clips into place.
GB
6
Reversing the door
The side at which the door opens can be changed from the right side(as
supplied) to the left side, if the installation site requires.
Warning!
When changing the side at which the door opens, the appliance must not be
connected to the mains. Remove plug from the mains beforehand.
The side at which the door opens can be changed from the right side (as supplied)
to the left side, if the installation site requires. Tilt the appliance slightly towards the
rear and prop it securely. Unscrew the door hinge screws and remove the hinge pin
bracket. Open the door a little way and take it out downwards.
Unscrew the upper pin and screw it into place on
the opposite side. Fit the door into the upper pin and
close it. Screw the hinge pin bracket securely into
place on the opposite side using the screws.
Integrated Cooling
Technical Diagrams
GB
7
Positioning
Position the appliance away from sources of heat such as stoves, radiators,
direct sunlight etc. Maximum performance and safety are guaranteed by
maintaining the correct indoor temperature for the class of unit concerned, as
specified on the rating plate.
Climate classification Ambient temperature
SN 10~32ć
N 16~32ć
ST 16~38ć
T 16~43ć
This application works best from SN to ST
Appliances must not be exposed to rain. Sufficient air must be allowed to
circulate in the lower rear section of appliances, as poor air circulation can
affect performance. Built-in appliances should be positioned away from heat
sources such as heaters and direct sunlight.
Description of the appliance
View of the appliance
1.Butter/cheese compartments with flap and egg storage insert
2.Temperature regulator 3.Door storage compartment
4.Storage shelves 5.Bottle shelf
6.Vegetable drawers
Starting up and temperature regulation
Insert the plug of the connection lead into the plug socket with protective earth
contact. When the refrigerator compartment door is opened, the internal lighting is
switched on.
The temperature selector knob is located on the RH side of the refrigerator
compartment.
Setting 0 means:
Off.
Turning clockwise in direction Refrigerating unit on, the latter then operating
automatically.
Setting 1 means:
Highest temperature, warmest setting.
GB
8
Setting 7 (end-stop) means:
Lowest temperature, coldest setting.
At a low ambient temperature of around 16 ć, setting 1 should be selected. At
ambient temperatures of around 25 ć, select setting 2. If you require a lower
temperature, select setting 3 or 4.
Important!
High ambient temperatures (e.g. on hot summer days) and a cold setting on the
temperature regulator (position 6 to 7) can cause the compressor to run continuously.
Reason: when the ambient temperature is high, the compressor must run
continuously to maintain the low temperature in the appliance.
Interior accessories
Storage shelves/wire tray
Various glass or plastic storage shelves and wire trays are included with your
appliance - different models have different combinations.
You should always slide one of the full size glass storage shelves into the lowest set
of guides, above the fruit and vegetable containers, and keep it in this position.
The height of the storage shelves can be adjusted:
To do this, pull the storage shelf forward until it can be swiveled upwards or
downwards and removed.
Please do the same in reverse to insert the shelf at a different height.
Correct storage
1.Meat, salami, cold cuts, dairy 2.Ready meals, pastries
3. Cheese storage, fruit, and vegetables 4.Preserves 5.Drinks
Tips:
Food in the refrigerator should always be covered or packaged, to prevent drying and
tainting of other food.
The following are suited for packaging:
Polyethylene airtight bags and wraps,
Plastic containers with lids;
Special plastic covers with elastic,
Aluminium foil.
Switching off the appliance
To switch off the appliance, turn the temperature regulator to position ”0”.
GB
9
If the appliance is not going to be used for an extended period:
Remove all refrigerated packages.
Switch off the appliance by turning the temperature regulator to position Ā0ā.
Remove the mains plug or switch off or disconnect the electricity supply.
Clean thoroughly (see section: Cleaning and Care)
Leave the door open to avoid the build up of odors.
Cleaning and Care
For hygienic reasons the appliance interior, including interior accessories, should be
cleaned regularly.
Warning!
The appliance may not be connected to the mains during cleaning. Danger of
electrical shock! Before cleaning switch the appliance off and remove the plug from
the mains, or switch off or turn out the circuit breaker or fuse.
Never clean the appliance with a steam cleaner. Moisture could accumulate in
electrical components, danger of electrical shock! Hot vapors can lead to the damage
of plastic parts.
The appliance must be dry before it is placed back into service.
Important!
Ethereal oils and organic solvents can attack plastic parts, e.g. lemon juice or the
juice from orange peel, butyric acid, cleanser that contain acetic acid.
Do not allow such substances to come into contact with appliance parts.
Do not use any abrasive cleansers.
Remove the food from the refrigerator. Store it in a cool place, well covered.
Switch the appliance off and remove the plug from the mains, or switch off or turn out
the circuit breaker or fuse.
Clean the appliance and the interior accessories with a cloth and lukewarm water.
Commercially available dish washing detergents may also be used.
After cleaning wipe with fresh water and rub dry.
Accumulation of dust at the condenser increases energy consumption.
For this reason carefully clean the condenser at the back of the appliance once a
year with a soft brush or a vacuum cleaner.
Check the water drain hole on the rear wall of the fridge.
Clear a blocked drain hole with the aid of the green peg in the pack of accessories
included with the appliance.
After everything is dry place appliance back into service.
Trouble shooting
Correcting Malfunctions
Spare parts:
The following spare parts can be ordered .
You can fit these yourself without any special skill or training, e.g.:
butter/cheese compartment,
egg holders,
door racks,
fruit and vegetable drawers,
storage racks.
A malfunction may be caused by only a minor fault that you can rectify yourself using
the following instructions. Do not perform any other work on the appliance if the
following information does not provide assistance in your specific case.
Important!
Repairs to refrigerators/freezers may only be performed by competent service
engineers. Improper repairs can give rise to significant hazards for the user. If your
appliance needs repairing, please contact your specialist dealer or your local Service
GB
10
Force Center.
Symptom Possible Cause Remedy
Appliance is not switched on. Switch on the appliance.
Mains plug is not plugged in or is
loose.
Insert mains plug.
Fuse has blown or is defective. Check fuse, replace if
necessary.
Appliance does not work.
Socket is defective. Mains malfunctions are to be
corrected by an electrician.
Appliance cools too much. Temperature is set too cold. Turn the temperature
regulator to a warmer setting
temporarily.
Temperature is not properly
adjusted.
Please look in the “initial Start
Up” section.
Door was open for an extended
period.
Open the door only as long
as necessary.
A large quantity of warm food was
placed in the appliance within the
last 24 hours.
Turn the temperature
regulation to a colder setting
temporarily.
The food is too warm.
The appliance is near a heat
source.
Please look in the “installation
location” section.
Interior lighting does not
work.
Light bulb is defective. Please look in the “changing
the Light Bulb “section.
Heavy build-up of frost,
possibly also on the door
seal.
Door seal is not air-tight(possibly
after reversing the door).
Carefully warm the leaking
sections of the door seal with
a hair dryer(on a cool
setting). At the same time
shape the warmed door seal
by hand such that it sits
correctly.
Appliance is not level. Readjust the feet.
The appliance is touching the wall
or other objects.
Move the appliance slightly.
Unusual noises.
A component, e.g. a pipe, on the
rear of the appliance is touching
another part of the appliance or
the wall.
If necessary, carefully bend
the component out of the
way.
The compressor does not
start immediately after
changing the temperature
setting.
This is normal, no error has
occurred.
The compressor starts after a
period of time.
Water on the floor or
storage shelves.
Water drain hole is blocked. See the “cleaning and care”
section.
Changing the light bulb
Warning!
Before changing the light bulb, switch off the appliance and unplug it, or pull the fuse
or the circuit breaker.
Light bulb data: 220-240 V, max. 15 W
To switch off the appliance, set the temperature regulator to position Ā0ā.
Unplug the mains plug.
To change the light bulb, undo the screw.
Press the light bulb cover and slide it backwards.
GB
11
Change the defective light bulb.
Refit the light bulb cover and the screw.
Put the refrigerator back into operation.
Noises during Operation
The following noises are characteristic of refrigeration appliances:
Clicks
Whenever the compressor switches on or off, a click can be heard.
Humming
As soon as the compressor is in operation, you can hear it humming.
Bubbling
When refrigerant flows into thin tubes, you can hear bubbling or splashing noises.
Splashing
Even after the compressor has been switched off, this noise can be heard for a short
time.
Disposal of the appliance
It is prohibited to dispose of this appliance in domestic household waste.
For disposal there are several possibilities:
1. The municipality has established collection systems, where electronic waste can
be disposed of at least free of charge to them user.
2.The manufacturer will take back the old appliance for disposal at least free of
charge to the user.
3.As old products contain valuable resources, they can be sold to scrap metal
dealers.
Wild disposal of waste in forest and landscapes endangers your health when
hazardous substances leak into the ground-water and find their way into the food
chain.
Meaning of crossed out wheeled dustbin:
Do not dispose of electrical appliances as unsorted
Municipal waste, use separate collection facilities.
Contact your local government for the information
regarding the collection systems available.
If electrical appliances are disposed of in landfills or dumps,
hazardous substances can leak into the groundwater and
get into the foodchain, damaging your health and well-being
This symbol on the product or in the instructions mean that
your electrical and electronic equipment should be
disposed at the end of life separately from your household
waste. There are separate collection systems for recycling
in the EU. For more information, please contact the local
authority or your retailer where you purchased the product.
GB
12
Energy Saving tips
1. Do not place warm foods into the appliance. Allow warm foods to cool first. Do
not install the appliance near cookers, radiators or other sources of warmth.
High ambient temperatures cause longer, more frequent operation of the
compressor
2. In order to make the cooling system work efficiently, please make sure the side
plates and back plate of the product are with some distance from the wall. It is
strongly recommended that the distance should be more than 50mm.
3. When the product works, please do not open the door too often or leave the
door open any longer than necessary.
4. Do not set temperature any colder than necessary.
5. The sketch map shows the right combination of the drawers, baskets and
shelves which can lead to the more energy efficiency. If users adjusted the
combination, it would result the energy-consuming.
Regulations, Standards, Guidelines
This appliance is in accordance with the following EU guidelines:
-73/23/EEC low voltage guidelines.
-89/336/EEC EMC Directive
-643/2009 ecodesign requirements for household refrigerating appliances.
-2009/125/EC framework for the settting of ecodesign requirements for energy-using
GB
REFRIGERATEUR ENCASTRABLE
FR
1
Cher client,
Cette notice contient des informations importantes relatives à l'installation, à
l'utilisation et à la maintenance de votre nouveau réfrigérateur. Nous vous
recommandons de la lire attentivement de manière à optimiser l'utilisation de votre
appareil en toute sécurité.
Conservez ce document et n'oubliez pas de le confier à l'acquéreur en cas de
revente.
Veuillez noter que pour une meilleure lecture de cette notice, les principes de
fonctionnement importants sont précédés par les termes Important !, Attention !
Ces termes sont destinés à vous alerter sur l’importance d’une information pour votre
sécurité. Assurez-vous d’avoir bien compris tous les avertissements signalés dans
cette notice.
FR
2
Sommaire
Important ! Instructions de sécurité 3
Comment enlever le packaging de protection 4
Installation de votre appareil 5
Encastrement de votre appareil 5
Inversion du sens d’ouverture des portes 6
Comment positionner votre appareil 7
Description de l’appareil 8
Démarrer et régler la température 8
Aménagement intérieur 9
Comment nettoyer votre appareil 10
Conseils divers 10
Dysfonctionnements éventuels 11
Changer l’ampoule 12
Bruits pendant le fonctionnement 12
Normes 12
Mise hors d’usage de l’appareil 12
FR
3
IMPORTANT : INSTRUCTIONS DE SECURITE
Ces avertissements vous sont donnés dans la cadre de votre sécurité. Assurez-
vous d'avoir tout compris avant d'installer et d'utiliser votre appareil. N'hésitez pas à
contacter votre revendeur si un doute relatif à la compréhension de ces
avertissements subsiste.
Usage habituel :
Cet appareil est exclusivement destiné à un usage domestique dans le cadre de la
conservation de produits alimentaires comestibles à basse température. Si le
réfrigérateur est utilisé à d'autres fins, tel que dans un cadre commercial, ou mal
utilisé, le constructeur ne peut être tenu responsable des dommages
éventuellement causés.
Pour des raisons de sécurité, ne cherchez en aucun cas à modifier les paramètres
techniques de votre appareil.
Avant toute utilisation :
Après avoir déballé votre appareil, vérifiez son bon état. Il ne doit en aucun cas être
branché s'il est endommagé. Signalez toute anomalie à votre revendeur.
Réfrigérant :
Le réfrigérant isobutane (R600a) est contenu dans le circuit de votre appareil. Il
s'agit d'un gaz naturel respectueux de l'environnement, qui est cependant
inflammable. Assurez-vous qu'aucun composant du circuit de réfrigération ne vienne
à être endommagé lors du transport ou de l'installation de l'appareil.
Si le circuit réfrigérant venait à être endommagé :
- tenez l'appareil à l'écart de toutes flammes et sources inflammables;
- ventilez au maximum la pièce dans laquelle se trouve l'appareil.
/!\ Autres points d'alerte :
ATTENTION - Maintenir les ventilations ouvertes et libres de toute obstruction, à
l'extérieur comme à l'intérieur de l'appareil.
ATTENTION - N'utilisez aucun dispositif mécanique ou tout autre moyen en vue
d'accélérer le processus de dégivrage autre que ceux recommandés par le fabricant.
ATTENTION - N'endommagez pas le circuit de réfrigération.
ATTENTION - N'utilisez pas d'appareil électrique à l'intérieur des compartiments du
réfrigérateur.
ATTENTION - L'appareil ne doit pas être utilisé par les enfants sans la présence
d'un adulte.
ATTENTION - Les jeunes enfants doivent être surveillés afin qu'ils ne jouent pas
avec l'appareil.
FR
4
ATTENTION - Ne vous débarrassez pas de votre appareil ailleurs que chez un
spécialiste autorisé. Retirez la porte avant de vous en débarrasser.
ATTENTION - Si le fil électrique est abîmé, il doit impérativement être remplacé par
le fabricant, un réparateur agréé ou une personne qualifiée dans le but d'éviter tout
danger.
ATTENTION – Gardez éloigné de l’appareil toute substance qui pourrait causer le
départ d’une étincelle.
Pour la sécurité des enfants :
L'emballage peut-être dangereux pour les enfants (risque de suffocation). Gardez-le
à l'écart des enfants!
Prenez vos dispositions pour mettre hors d'usage votre ancien appareil :
débranchez-les prises et les autres connections et retirez les vis s'il était fixé.
Assurez-vous que les enfants ne puissent pas s'enfermer dans l'appareil en jouant (il
y a un risque de suffocation) ou qu'ils ne puissent se mettre en danger, n'étant eux
mêmes pas toujours conscients des dangers des appareils électroménagers. Par
conséquent, il est très important que les parents surveillent de près leurs enfants s'ils
viennent à jouer avec l'appareil.
L'utilisation quotidienne :
Les composants contenant des gaz inflammables ou des liquides peuvent fuir à
basse température. Un risque d'explosion existe! Ne jamais mettre aucun produit
inflammable (comme des produits en spray), ni d'appareil électrique (ex : mixers, etc.)
dans votre réfrigérateur.
Avant de nettoyer votre appareil, pensez toujours à l'éteindre ou à le débrancher.
En cas de dysfonctionnement :
Si un dysfonctionnement apparaît, reportez-vous s'il vous plait en premier lieu à la
section "dysfonctionnements éventuels" de cette notice. Si les informations fournies
dans cette dernière ne suffisent pas, demandez de l'aide à votre revendeur.
N'entreprenez en aucun cas de réparer votre appareil vous même.
Comment enlever le packaging de protection?
L’appareil et l’aménagement intérieur sont protégés pour le transport.
Retirez l’adhésif qui se trouve sur les côtés droit et gauche de la porte. Vous pouvez
retirer tout reste d’adhésif en utilisant du White Spirit. Retirez tous les adhésifs et les
protections des pièces intérieures.
FR
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135

ROSIERES RBLP230 Návod k obsluze

Typ
Návod k obsluze