AirLive WL-1600GL Návod k obsluze

Kategorie
Směrovače
Typ
Návod k obsluze
802.11g Wireless Broadband Router
WL-1600GL
Table of Contents
List of Lan
g
ua
g
es
WL-1600GL
Italiano
Magyar
En
g
lish
Česky
..................
Deutsch
...............
Español
Slovensky
Français
................
................
...............
............
................
Polski
.................
Português
ий
..............
.............
Русск
...............
1
38
44
8
14
20
26
32
50
56
62
1
WL-1600 GL
English
Declaration of Conformity
We, Manufacturer/Importer
OvisLink Corp.
5F., NO.6, Lane 130, Min-Chuan Rd., Hsin-Tien City, Taipei County, Taiwan
Declare that the product
802.11g Wireless Broadband Router
AirLive WL-1600 GL
is in conformity with
In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive
Clause Description
EN 300 328 v1.7.1 (2006-10) Electromagnetic compatibility and Radio spectrum Matters (ERM); wideband transmission equipment operating in the
2.4GHz ISM ban and using spread spectrum modulation techniques; Part 1technical Characteristics and test
Conditions Part2Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
EN 301 489-1 V1.6.1 (2005-09) Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility(EMC) standard
EN 301 489-17 V1.2.1 (2002-08) for radio equipment and services; Part 17Specific conditions for wideband data and HIPERLAN equipment
EN 60950-1:2001/A11:2004 Safety for information technology equipment including electrical business equipment
CE marking
Manufacturer/Importer
Signature
______________
Name Albert Yeh____
Position/ Title :
Vice President
Date
2008/9/15 _____
English
2
WL-1600 GL
English
English
Note on the FCC standard
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferences
when the equipment is operating in a commercial area. This equipment generates uses and may radiate radio
frequency energy, and if not installed in accordance with the user guide, may cause interference in the
transmission of radio communications. If operating in a residential area, it is probable this equipment will cause
harmful interference, in which case the user will be required to try to correct this interference using his own
means.
Note on CE Marking
This is a Class B product. In a residential area this product may cause radio interference, in which case the user
can be required to take the appropriate measures. OvisLink Corp. hereby declares that AirLive WL-1600 GL
meets the basic requisites of directive 99/05/CE, and is therefore liable for the accuracy of these data:
OvisLink Corp.
5F, No.6 Lane 130,
Min-Chuan Rd, Hsin-Tien City,
Taipei, Taiwan
TEL: +886-2-2218-6888
Warranties
This product has undergone various quality controls to ensure proper operation.
This product is covered by a two-year warranty for countries inside European Union. For other countries, the
warranty period is one year only. In the event of any manufacturing fault or breakdown, it will be repaired by
OvisLink Corp. Please contact your supplier for details on the procedure to follow. This warranty shall not be
applicable in the event of damage caused by improper use of the product, accidents, faulty handling or
manipulation nor any future incompatibility with third party products.
English
Default Setting:
Basic Information
z IP Address: 192.168.1.254
z Subnet Mask: 255.255.255.0
z Login admin
z Password: airlive
z Default SSID: airlive
z Default Channel: 6
LED Indicators
Power LED On - Power on.
Off - No power.
WLAN LED On - Idle.
Off – non Connection
Flashing - Data is being transmitted or received via the Network.
Internet LED On - Internet connection is available.
Off - non Connection.
Flashing - Data is being transmitted or received.
WAN LED On - Connection to the Broadband Modem attached to the WAN (Internet) port is established.
Off - non Connection.
Flashing - Data is being transmitted or received via the WAN port.
LAN LEDs
For each port, there are 1 LED
10 (Orange)/100 (Green)
On - Corresponding LAN (hub) port is active.
3
WL-1600 GL
Off - non Connection.
Flashing - Data is being transmitted or received via the corresponding LAN (hub) port.
WPS Button Press for the WPS Connection
English
4
WL-1600 GL
English
Antenna One 2 dbi antenna.
WAN Connect the DSL or Cable Modem here. If your modem came with a cable, use the supplied
cable. Otherwise, use a standard LAN cable.
LAN Use standard LAN cables (RJ45 connectors) to connect your PCs to these ports.
Reset Button This button has two (2) functions:
Reboot. When pressed and released, the Wireless Router will reboot (restart).
Clear All Data. This button can also be used to clear ALL data and restore ALL settings to
the factory default values.
To Clear All Data and restore the factory default values:
1. Power Off.
2. Hold the Reset Button down while you Power On.
3. Keep holding the Reset Button for a few seconds, until the RED LED has flashed TWICE.
4. Release the Reset Button. The Wireless Router is now using the factory default values.
Power port Connect the supplied power adapter here.
Real Panel
English
English
Hardware Installation
1. Setup LAN connection: connect an Ethernet cable from your computer’s Ethernet port to one of the
LAN ports of this product.
2. Setup WAN connection with your router: connect the network cable from your cable (xDSL)
modem to the WAN port of this product.
5
WL-1600 GL
English
6
WL-1600 GL
English
English
Auto Setup Wizard
1. Open Internet Explorer 5.0 or above Internet browser.
2. Enter IP address http://192.168.1.254 (the factory-default IP
address setting) to the URL web address location.
Wired
Network Setup
Point the cursor and click the right button on the “My
Network Place” icon.
Select “properties” to enter the TCP/IP setting
window.
1. Set “IP address” to “Obtain an IP address
automatically.”
2. Set “DNS” to “Obtain DNS server address
automatically.
English
3. When the following dialog box appears, enter the user name and
password to login to the main configuration window, the default
username is admin and password is “airlive
Note: If needed to set a password, then refer to the System
Password
Setting.
After entering the password, the main page comes up, the screen will display
the device information
4. Once you login to router please click the Setup Wizard and Step
through the Wizard until finished.
7
WL-1600 GL
English
8
WL-1600 GL
Czech
FCC Standard - upozorně
Toto zařízení bylo testováno a vyhovuje předpisům třídy B pro digitální zařízení, na základě odstavce 15,
FCC pravidel. Tyto limity jsou vytvořeny po poskytování účinné ochrany před škodlivými vlivy zařízení
pracující v komerční sféře. Toto zařízení vyzařuje radiové vlny a pokud není instalováno a používáno
v souladu s touto uživatelskou příručkou, tak může vykazovat rušení okolní radiové komunikace. Provoz
tohoto zařízení v osídlených oblastech bude pravděpodobně příčinou nežádoucího rušení. V tomto případě
by měl uživatel přijmout opatření, která povedou ke korekci rušení.
CE Marking - upozorně
Toto zařízení odpovídá třídě B. V domácím prostředí může způsobovat radiové rušení. V tomto případě by
měl uživatel přijmout odpovídající opatření. Společnost OvisLink Corp. takto deklaruje, že AirLive WL-1600
GL splňuje základní pravidla norem 99/05/CE, a je proto odpovědná za správnost všech údajů
:
OvisLink Corp.
5F, No.6 Lane 130,
Min-Chuan Rd, Hsin-Tien City,
Taipei, Taiwan
TEL: +886-2-2218-6888
Záruka
Tento produkt byl podrobený rozličným kontrolám kvality k zajištění všech funkcí.
Tento produkt podléhá dvouleté záruce v krajinách Evropské Unie. V ostatních krajinách je záruční doba
stanovena na jeden rok. V případě výrobních závad nebo nefunkčnosti bude zařízení opraveno společností
OvisLink Corp. Prosím kontaktujte svého dodavatele, který vám sdělí detailní informace. Záruka nebude
uznána pokud dojde k poškození zařízení vlivem nestandardního užívání, např.: fyzické poničení následkem
pádu, nesprávná manipulace, neautorizované zásahy, provoz v extremních podmínkách atd.
Česky
Základní Informace
Tovární nastavení:
z IP Adresa: 192.168.1.254
z Subnet Mask: 255.255.255.0
z
Jméno admin
z Heslo: airlive
z Tovární SSID: airlive
Česky
z Tovární Channel: 6
LED Indikátory
Power LED On - Zapnuto.
Off - Vypnuto.
WLAN LED On - klidový stav.
Offbez spojení
Bliká - probíhá přenos dat..
Internet LED
On - internetové připojení je dostupné.
Off - bez spojení.
Bliká - probíhá přenos dat.
WAN LED
On - připojení k broadbend modemu (připojeného k internetu) je dostupné.
Off - bez spojení.
Bliká – probíhá přenos dat přes WAN port.
LAN LEDky
Pro každý port je 1 LED
9
WL-1600 GL
Czech
10 (Oranžová)/100 (Zelená)
On -
komunikuje, LAN (hub) port je aktivní..
Off - bez spojení.
Bliká – probíhá přenos dat přes LAN (hub) port.
WPS Tlačítko
Stiskněte pro WPS spojení
10
WL-1600 GL
Czech
Zadní Panel
Česky
Anténa Jedna 2 dbi anténa.
WAN
Zde připojte DSL nebo kabelový modem. Jestli-že jste obdrželi
k Vašemu modemu kabel, tento použijte. Jinak použijte standardní LAN kabel
.
LAN Pro připojení k počítači použijte standardní LAN kabel (s konektorem RJ45)
tlačítko Toto tlačítko má 2 funkce:
Reboot. Po stisknutí a uvolnění tohoto tlačítka se zařízení restartuje.
Clear All Data. Toto tlačítko také může být použito pro vymazání dat a znovunačtení
továrního nastavení.
.
Jak obnovit tovární nastavení:
1.
Vypněte zařízení.
2. Držte tlačítko RESET, dokud se zařízení nezapne.
3.
Držte tlačítko ještě několik sekund, dokud červená LED dioda neblikne 2x..
4. Uvolněte RESET tlačítko. Wireless router je nyní v továrním(defaultním) nastavení.
Napájecí konektor
Zde připojte napájecí kabel..
H
ar
d
warov
á
I
ns
t
a
l
ace
1. LAN připojení: připojte ethernet kabel z Vašeho počítače do jednoho z LAN portů na tomto produktu.
2. WAN připojení s Vašim routerem: připojte síťový kabel z Vašeho kabelového (xDSL) modemu do
WAN portu na tomto zařízení
Česky
11
WL-1600 GL
Czech
12
WL-1600 GL
Czech
Nastavení Sítě
Klikněte pravým tlačítkem myši na ikonu “Místa v síti”.
Zvolte “Vlastnosti” a otevřete nastavení TCP/IP.
Česky
1. Nastavte IP adresu” na “získat IP adresu
automaticky
2. Nastavte DNS” na “získat DNS server adresu
automaticky.
Pomocník automatického nastavení
1. Otevřete Internet Explorer 5.0 nebo vyšší.
2. Vložte IP adresu
http://192.168.1.254 (tovární/defaultní IP
adresa) do URL adresy prohlížeče.
3. Až se objeví dialogové okno, vložte jméno a heslo.
Tovární/defaultní nastavení je jméno : admin a heslo : airlive
Důležité: Pokud potřebujete nastavit heslo, jděte do System
Password
Setting.
Česky
Po vložení hesla se objeví hlavní stránka a display zobrazí informace o
zařízení.
4. Jakmile se přihlásíte k routeru, prosím klikněte na Setup Wizard a krok
po kroku dokončete nastavení zařízení.
13
WL-1600 GL
Czech
14
WL-1600 GL
Deutsch
Anmerkungen zum FCC-Standard
Dieses Produkt wurde getestet und ist anerkannt worden, mit den Richtlinien der FCC, Teil 15 für digitale Geräte der
Kategorie B übereinzustimmen. Diese Beschränkungen sind dafür bestimmt, einen angemessenen Schutz gegen
schädliche Störungen zu bieten wenn die Produkte in einer gewerblichen Umgebung verwendet werden. Diese Produkte
erzeugen und benutzten Radiofrequenzen und können darüber hinaus solche ausstrahlen. Bei einer Installation und
Nutzung, die sich nicht nach dieser Bedienungsanleitung richtet kann zudem eine schädliche Störung des Funkverkehrs
auftreten. Beim Betrieb dieser Produkte im Wohnbereich sind solche Störungen nicht unwahrscheinlich. In diesem Fall
wird der Benutzer dazu aufgefordert, die Störungen auf eigene Kosten zu beseitigen.
Anmerkungen zum CE-Zeichen
Hier handelt es sich um ein Produkt der Kategorie B. In häuslicher Umgebung können solche Produkte Funkstörungen
hervorrufen. In diesem Fall kann der Benutzer aufgefordert werden, entsprechende Maßnahmen zu treffen. Die Firma
OvisLink erklärt hiermit, dass der AirLive WL-1600 GL die Basisanforderungen der CE-Direktive 99/05/CE erfüllt und ist
somit verantwortlich für die Verlässlichkeit dieser Angaben:
OvisLink Corp.
5F, No.6 Lane 130,
Min-Chuan Rd, Hsin-Tien City,
Taipei, Taiwan
TEL: +886-2-2218-6888
Deutsch
Garantiebestimmungen
Um einen sicheren Betrieb zu gewährleisten wurde dieses Produkt verschiedenen Qualitätskontrollen unterzogen. Für
dieses Produkt werden innerhalb der Europäischen Union zwei Jahre Garantie gewährt. In anderen Ländern beträgt die
Garantiedauer nur 1 Jahr. Im Falle eines Herstellungsfehlers oder Defektes wird das Gerät durch Ovislink repariert.
Bitte fragen Sie in einem solchen Fall Ihren Händler nach weiteren Details. Diese Garantie gilt nicht im Falle eines
Schadens durch unsachgemäße Benutzung, Unfallschäden, Transportschäden oder einer Manipulation des Gerätes,
sowie auch nicht bei zukünftigen Inkompatibilitäten mit Produkten eines Dritten
15
WL-1600 GL
Deutsch
Allgemeine Informationen
Grundeinstellung:
z IP Address: 192.168.1.254
z Subnetzmaske: 255.255.255.0
z Login admin
z Password: airlive
z Netzwerkname SSID: airlive
z Voreingestellter Kanal: 6
LED Anzeigen
Power LED An - Eingeschaltet.
Aus - kein Strom.
WLAN LED An - Leerlauf (Bereit).
Auskeine Verbindung
Blinkend - Daten werden über das Netzwerk gesendet oder empfangen.
Internet LED
Deutsch
An - Die Internetverbindung ist hergestellt.
Aus - keine Verbindung.
Blinkend - Daten werden gesendet oder empfangen.
WAN LED
An - Die Verbindung zu dem Breitbandmodem am WAN (Internet) Anschluss ist hergestellt.
Aus - keine Verbindung.
Blinkend - Daten werden über den WAN Anschluss gesendet oder empfangen.
LAN LEDs
Für jeden Anschluss gibt es eine LED
10 (Orange)/100 (Grün)
An - Der entsprechende LAN (Hub) Anschluss ist aktiv.
Aus - keine Verbindung.
Blinkend - Daten werden über den entsprechenden LAN (Hub) Anschluss
gesendet oder empfangen
.
WPS Button Für eine WPS Verbindung drücken
16
WL-1600 GL
Deutsch
Hintere Anschlüsse
Antenne Eine 2 dBi Antenne.
WAN Verbinden Sie das DSL- oder Kabelmodem hier. Falls Ihr Modem mit einem Kabel geliefert
wurde, nutzen Sie dieses, andernfalls nutzen Sie bitte ein normales LAN Kabel..
LAN Nutzen Sie ein normales LAN Kabel (RJ45 Stecker) um Ihre PCs mit diesen Ports zu
verbinden..
Deutsch
Reset Taster Dieser Taster hat zwei (2) Funktionen:
Neustart. Durch kurzes drücken und loslassen wird der Router neu gestartet.
Löschen aller Daten. Dieser Taster kann auch dazu genutzt werden, alle
gespeicherten Daten zu löschen und das Gerät auf Werkseinstellung
zurückzusetzten.
Um alle Daten zu löschen und die Werksteinstellung zu laden gehen Sie so vor:
1. Gerät ausschalten.
2. Drücken und halten Sie den Reset-Taster, während des Einschaltens.
3. Halten Sie den Reset-Taster weiterhin gedrückt, bis die ROTE LED ZWEI Mal blinkt.
4. Lassen Sie nun den Reset-Taster los. Der Router nutzt jetzt wieder die
Werkseinstellungen.
Strom Anschluss Verbinden Sie das mitgelieferte Netzteil mit diesem Anschluss.
Hardware Installation
1. Einrichten der LAN-Verbindung: verbinden Sie mit einem Ethernet Kabel den LAN Anschluss Ihres
PCs mit einem der LAN Anschlüsse dieses Produktes.
2. Einrichten der WAN-Verbindung dieses Routers: verbinden Sie das Netzwerkkabel Ihres Kabel-
oder xDSL-Modems mit dem WAN Anschluss dieses Produktes.
Deutsch
17
WL-1600 GL
Deutsch
18
WL-1600 GL
Deutsch
Netzwerkeinrichtung
Zeigen Sie mit der Maus auf das Icon
“Netzwerkumgebung” und klicken Sie es dann mit
der rechten Maustaste an. Wählen Sie den Punkt
“Eigenschaften” um die TCP/IP Einstellungen
vorzunehmen.
1. Stellen Sie “IP-Adresse” auf “Automatisch
beziehen
2. Stellen Sie DNS” auf
DNS-Servereinstellungen automatisch
beziehen.
Deutsch
Automatischer Installationsassistent
1. Starten Sie den Internet Explorer 5.0 oder höher.
2. Geben Sie die IP Adresse
http://192.168.1.254 (die vom Werk
voreingestellte IP-Adresse des Routers) in der Adresszeile als
Webseite ein.
1 / 1

AirLive WL-1600GL Návod k obsluze

Kategorie
Směrovače
Typ
Návod k obsluze