Motorola H12 - MOTOPURE H12 - Headset Uživatelský manuál

MOTOROLA and the Stylized M Logo are registered in the US Patent &

Trademark Ofﬁ ce. All other product or service names are the property of

their respective owners. The Bluetooth trademark and logos are owned by

the Bluetooth SIG, Inc. and any use of such marks by Motorola, Inc. is under

6803578F12 - Printed in the EU.

motorola.com

Universal Bluetooth

®

Headset H12

H12

MOTOMANUAL

&

f

y

r

1

3

2

1

Figure 2

Figure 1

6

4

7

1

2

3

5

2

Figure 4

Figure 3

Figure 5

3

Charging

Contacts

Charging

Contacts

Figure 6

Figure 7

4

Figure 8

Power

Switch

Indicator

Light

English

5

European Union Directives Conformance Statement

Hereby, Motorola Inc., declares that this H12 is in compliance

with the essential requirements and other relevant provisions of

Directive 1999/5/EC.

You can view your product’s Declaration of Conformity (DoC) to Directive

1999/5/EC (the R&TTE Directive) at www.motorola.com/rtte.

Caring for the Environment by Recycling

When you see this symbol on a Motorola product, do not dispose

the product with household waste.

Recycling Mobile Phones and Accessories

Do not dispose of mobile phones or electrical accessories, such as chargers

or headsets, with your household waste. In some countries or regions,

collection systems are set up to handle electrical and electronic waste items.

Contact your regional authorities for more details. If collection systems aren’t

available, return unwanted mobile phones or electrical accessories to any

Motorola Approved Service Centre in your region.

FCC Notice to Users

Users are not permitted to make changes or modify the device in any way.

Changes or modiﬁ cations not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment. See-

47-CFR-Sec.-15.21.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation. See-47-CFR-Sec.-15.19(3).

English

6

Before you begin

See ﬁ gure 1 on page 1.

Take a moment before you get started to familiarize yourself with your new

H12 Bluetooth

®

Hands-free Headset.

1. Power switch

2. Call button

3. Indicator light

4. Microphone

5. Charging contacts

6. Volume buttons

7. Speaker

Along with your headset, a charger case and a desktop charger are provided

for both charging and storage.

See ﬁ gure 2 on page 1.

Charging case

1. Charger port

2. Charging contacts

3. Charger cover

Desktop charger

1. Charger port

2. Charging contacts

English

7

Wearing your headset

See ﬁ gure 3 on page 2.

Your H12 headset is supplied with multiple ear buds. The ear bud is ﬁ tted

onto the end of your headset’s earpiece speaker, and placed onto your ear

when using your headset. Your headset’s performance is greatly dependent

upon achieving a good ﬁ t on your ear. Therefore, we recommend trying all

the supplied ear buds with your headset.

When ﬁ tting an oval-shaped ear cushion on your headset, be sure the

cushion is pointing towards the microphone.

You can wear your H12 headset on your left of right ear. The headset comes

ready for the right ear.

Placing the headset on your ear:

see ﬁ gure 4 on page 2.

Placing the headset on the left ear: see ﬁ gure 5 on page 2.

Charging your headset

See ﬁ gure 6 & 7 on page 3.

You can only charge the headset via the charging case or the desktop

charger. You cannot plug the Motorola charger directly in the headset.

1. Plug the Motorola charger into the port on the charger case or desktop

charger

2. Place the headset into the charger case or onto desktop charger. Ensure

that that charging contacts on the headset and charging case or desktop

charger connect.

Note: Earhook must be rotated to the orientation as shown on ﬁ gure 6 to

ensure charging contacts connect.

English

8

The indicator light turns red when the battery is charging. It may take up to

1 minute for the indicator light to turn on. When the headset’s battery is fully

charged (about 2.5 hours), the indicator light turns green.

Note: Headset is NOT functional while charging.

Note: this product uses a lithium ion, rechargeable non-repleacable

battery. Under normal use, the expected life of the rechargeable battery is

approximately 400 charges.

Storing your headset

The charging case, desktop stand, and shirt clip are designed to store your

headset. When not using your headset, use one of the accessories for

storing convenience:

• The charging case is designed for portability and protection when

headset is not in use. Case can be placed in a pocket or bag and can

easily ﬁ t into many car cup holders.

• The desktop charger displays your headset for easy access at home or

the ofﬁ ce.

• The shirt clip secures your headset for access on-the-go. The clip can

be attached to a shirt, bag, or purse strap.

English

9

Turning headset on and off

See ﬁ gure 8 on page 4.

To turn your headset on, slide the Power switch on (towards Power symbol

on headset). The indicator light ﬁ rst ﬂ ashes blue for several seconds, then:

• ﬂ ashes blue (if paired and connected to with another device

• becomes steadily blue (if ready to be paired)

To turn your headset off, slide the Power switch off. The indicator light will

turn off.

Checking battery level

While turned on and not on a call, you can check the headset’s battery

charge level by pressing and holding both Volume buttons. The indicator

light displays charge status until you release the buttons. See “Indicator

Lights” section for details.

Note: This feature does not work when headset is in pairing mode.

English

10

Pairing your headset

Your phone’s Bluetooth feature is off by default. To use your headset, you

must turn on the Bluetooth feature in your phone. Please check your phone’s

user’s guide.

Note: The Bluetooth feature remains on until you turn the feature off.

Before you can use your headset, you must pair it with your phone.

1. Ensure headset is in pairing mode

Remove headset from charging base or desktop charger and power it on.

The indicator light ﬂ ashes to initiate easy pairing. After a few moments,

the indicator light will be steadily lit in blue to indicate headset is in

pairing mode.

If the headset does not enter into pairing mode, see “Troubleshooting”

section.

2. Set your phone to look for your headset

• Perform a device discovery from the phone. For details about device

discovery, consult your phone’s user’s guide. The phone lists Bluetooth

devices it ﬁ nds.

• Select Motorola H12 in the list of discovered devices and conﬁ rm by

following the on-screen prompts.

• When prompted by the phone, enter the passkey 0000 and conﬁ rm.

Pairing is successful when the headset indicator changes from steadily lit

to ﬂ ashing blue.

Test and use

Your phone and headset are now paired and ready to make and receive

calls. To conﬁ rm they are successfully paired and operating properly, place

the headset over your ear and make a call from your phone. You will hear

ringing from the headset. After you have successfully paired your phone

and headset, you do not need to repeat these steps each time you use the

headset.

English

11

Using your headset: Making & receiving calls

Your headset supports both hands-free and headset proﬁ les.

Accessing call functions depend upon which proﬁ le your phone supports.

See your phone’s user’s guide for more information.

Note: Some features are phone/network dependent.

Function Action

Receive a call Tap the Call button

End a call Tap the Call button

Reject a call Press and hold either volume button until

you hear 2 descending tones

Redial last call Press and hold the Call button until you

hear 2 ascending tones

Make a voice dial call Tap the Call button and speak the name

after the tone

Answer a second incoming call Press and hold Call button

End an active call and resume Tap the Call button

a call on hold

Reject a second incoming call Press and hold either Volume button until

you hear an audio tone

Mute or un-mute a call Tap both Volume buttons

Indicator lights

Checking battery level

Headset indicator Available talk time

Green Up to 6 hours

Yellow 30 minutes to 5 hours

Red Less than 30 minutes

English

12

Charging status

With charger plugged in

Headset indicator Charge status

Red Charging (below 80% charge)

Yellow Charging (above 80% charge)

Green Charging complete

Operating status

With no charger plugged in

Headset indicator Headset status

Off Power off

3 blue ﬂ ashes Powering on/off

Steady blue Pairing mode

Rapid blue/purple ﬂ ashes Pairing/Connection successful

Quick blue ﬂ ash Incoming/outcoming call

Slow blue ﬂ ash Connected (on a call)

Standby (not on a call)

Slow red ﬂ ash Idle (not connected)

Slow purple ﬂ ash Connected (on a muted call)

Quick red ﬂ ash Low battery

Note: After 20 minutes on a call or of inactivity, the light stops ﬂ ashing to

conserve battery power, but the headset remains in standby mode.

Note: you can disable the indicator light as follows:

• Turn headset off

• Press and hold both volume buttons AND simultaneously turn headset

back on

English

13

Audio tones

Audio tone Headset status

Ring tone Incoming call

Single high tone Phone network not available

High to low tone End call

Single high tone when Volume at maximum or minimum

pressing volume button

Ascending tone Mute enabled

Low tone repeated Mute reminder

very 15 seconds

Descending tone Mute disabled

Low to high tone Pairing conﬁ rmation/voice activation

No audio indications: Out of range

deteriorating quality

2 tones repeated Low battery

every 30 seconds

English

14

Troubleshooting

My headset will not enter pairing mode

Make sure that any devices previously paired with the headset are turned

off. If the indicator light is not steadily lit in blue, turn off both the other

device and headset, wait 10 seconds, then turn headset back on. Wait for

the indicator light to become steadily lit in blue, indicating the headset is

now in pairing mode.

My phone doesn’t ﬁ nd my headset

Make sure the indicator light on your headset is on (lit in blue) and steady

when your phone is searching for devices.

My headset worked before but now it’s not working

Make sure your phone is on and the Bluetooth feature is turned on in

your phone. If the Bluetooth feature was turned off or was turned on only

temporarily, you may need to restart the Bluetooth feature and pair your

phone and headset again.

If you have any additional questions, please call your hotline number

(0870-9010-555) or visit us at www.hellomoto.com.

Français

15

Déclaration de conformité aux directives de l’Union Européenne

Par la présente Motorola Inc., déclare que l’appareil H12 est

conforme aux exigences essentielles et aux autres dispositions

pertinentes de la directive 1999/5/EC.

Vous pouvez consulter la Déclaration de conformité de votre produit à la

Directive 1999/5/EC (la Directive R&TTE) à l’adresse www.motorola.com/rtte.

Protection de l’environnement par le recyclage

Lorsqu’un produit Motorola arbore ce symbole, ne le jetez pas dans

votre poubelle.

Recyclage des téléphones portables et accessoires

Ne jetez aucun téléphone portable ou accessoire électrique, comme un

chargeur ou un kit piéton, dans votre poubelle. Des systèmes de collecte

permettant de traiter les déchets électriques et électroniques sont

progressivement mis en place. Renseignez-vous localement pour plus

d’informations. En l’absence de système de collecte, renvoyez les téléphones

portables et accessoires électriques à l’un des Centres de Service agréé par

Motorola le plus proche.

Avis aux utilisateurs

L’utilisateur n’a le droit d’apporter ni changement ni modiﬁ cation à l’appareil,

de quelque façon que ce soit. Le droit de l’utilisateur de faire usage de

l’appareil peut être annulé par des changements ou modiﬁ cations non

expressément approuvés par l’entité en charge de la conformité de l’appareil

aux normes. Voir 47 CFR Sec.15.21.

Cet appareil est conforme à la clause 15 des règlements de la FCC. Son

fonctionnement est sujet aux deux conditions suivantes : (1) cet appareil ne

doit pas causer d’interférence nuisible, et (2) cet appareil doit accepter toute

interférence, y compris l’interférence pouvant causer un fonctionnement

inapproprié. Voir 47 CFR Sec.15.19 (3).

Français

16

Avant de commencer

Voir ﬁ gure 1, page 1.

Prenez le temps d’observer votre nouvelle oreillette mains-libres Bluetooth

®

H12.

1. Bouton marche/arrêt

2. Bouton d’appel

3. Voyant

4. Microphone

5. Contacts de charge

6. Boutons de volume

7. Haut-parleur

Un boîtier de charge et un support de charge de bureau sont fournis avec

votre oreillette. Ils permettent à la fois de charger et de ranger l’oreillette.

Voir ﬁ gure 2, page 1.

Boîtier de charge

1. Port du chargeur

2. Contacts de charge

3. Couvercle du chargeur

Support de charge de bureau

1. Port du chargeur

2. Contacts de charge

Français

17

Port de votre oreillette

Voir ﬁ gure 3, page 2.

Votre H12 possède plusieurs embouts. L’embout est ﬁ xé sur l’extrémité du

haut-parleur de l’oreillette. Il se place directement dans l’oreille. La qualité

de son dépend pour beaucoup de la manière dont vous insérez l’embout. Il

est donc recommandé d’essayer tous les embouts.

Quand vous installez un embout de forme ovale, assurez-vous que la partie

la plus mince de l’embout soit dirigée vers le microphone.

Vous pouvez utiliser votre H12 sur l’oreille gauche ou droite. Elle est réglée à

l’origine pour l’oreille droite.

Port à l’oreille droite :

Voir ﬁ gure 4, page 2.

Port à l’oreille gauche : Voir ﬁ gure 5, page 2.

Charge de votre oreillette

See ﬁ gure 6 & 7 on page 3.

Vous ne pouvez charger l’oreillette que par l’intermédiaire du boîtier ou

du support de charge de bureau. Vous ne pouvez pas brancher le chargeur

directement à l’oreillette.

1. Branchez le chargeur dans le port du boitier ou du support de bureau.

2. Installez-y l’oreillette. Vériﬁ ez la connexion entre les contacts de charge

de l’oreillette et ceux du boîtier ou du support de bureau.

Remarque : le contour d’oreille doit être orienté comme indiqué en Figure 6

pour une bonne connexion.

Stránka se načítá ...

Motorola H12 - MOTOPURE H12 - Headset Uživatelský manuál

Motorola H12 - MOTOPURE H12 - Headset Uživatelský manuál

v jiných jazycích

Související papíry

Jiné dokumenty