Samsung PS42A410 Uživatelský manuál

imagine the possibilities

Plasma TV

user manual

BN68-01808A-01

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG

customer care centre.

Thank you for purchasing this Samsung product.

To receive more complete service, please

register your product at

www.samsung.com/global/register

Model Serial No.

Country Customer Care Centre  Web Site

AUSTRIA 0810 - SAMSUNG(7267864, € 0.07/min) www.samsung.com/at

BELGIUM 02 201 2418 www.samsung.com/be

CZECH REPUBLIC

800 - SAMSUNG (800-726786) www.samsung.com/cz

Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17,

180 00, Praha 8

DENMARK 8 - SAMSUNG(7267864) www.samsung.com/dk

EIRE 0818 717 100 www.samsung.com/ie

ESTONIA 800-7267 www.samsung.ee

FINLAND

30 - 6227 515

www.samsung.com/fi

FRANCE

3260 'dites' SAMSUNG (€ 0,15/Min)

0825 08 65 65 (€ 0.15/Min)

www.samsung.com/fr

GERMANY 01805 - SAMSUNG(7267864, € 0.14/Min) www.samsung.de

HUNGARY 06 - 80 - SAMSUNG(7267864) www.samsung.com/hu

ITALIA 800 - SAMSUNG(7267864) www.samsung.com/it

KAZAKHSTAN 8-10-800-500-55-500 www.samsung.com/kz_ru

KYRGYZSTAN 00-800-500-55-500

LATVIA 8000-7267 www.samsung.com/lv

LITHUANIA 8-800-77777 www.samsung.lt

LUXEMBURG 02 261 03 710 www.samsung.com/lu

NETHERLANDS 0900 - SAMSUNG(7267864, € 0.10/Min) www.samsung.com/nl

NORWAY 3 - SAMSUNG(7267864) www.samsung.com/no

POLAND

0 - 801 - 1SAMSUNG(172678)

022 - 607 - 93 - 33

www.samsung.com/pl

PORTUGAL 808 20 - SAMSUNG(7267864) www.samsung.com/pt

RUSSIA 8-800-555-55-55 www.samsung.ru

SLOVAKIA 0800 - SAMSUNG(7267864) www.samsung.com/sk

SPAIN 902 - 1 - SAMSUNG (902 172 678) www.samsung.com/es

SWEDEN 075 - SAMSUNG(726 78 64) www.samsung.com/se

Switzerland 0848 - SAMSUNG(7267864, CHF 0.08/min) www.samsung.com/ch

TADJIKISTAN 8-10-800-500-55-500

Turkey 444 77 11 www.samsung.com/tr

U.K 0845 SAMSUNG(7267864) www.samsung.com/uk

UKRAINE 8-800-502-0000 www.samsung.ua

UZBEKISTAN 8-10-800-500-55-500 www.samsung.com/kz_ru

BN68-01808A-Eng.indb 1 2008-11-05 오후 2:56:54

Stránka se načítá ...

English - 4

Checking Parts

Owner’s Instructions Remote Control/

AAA Batteries

Power Cord Cloth-Clean Holer-Ring (4ea)

(Refer to page 34)

Warranty Card/

Safety Guide Manual

(Not available in all

locations)

Cover-Bottom / Screws

(2ea)

(Refer to page 34)

Ferrite Core for

Power Cord (2ea)

Ferrite Core for

S-Video

Sold Separately

Antenna Cable Component Cables Audio Cables PC Cable

Scart Cable PC Audio Cable HDMI Cable HDMI/DVI Cable

➢

Ferrite Core (Power Cord, S-Video)

The ferrite cores are used to shield the cables from interference.

When connecting a cable, open the ferrite core and clip it around

the cable near the plug.

Using the Stand-Base

➢





Two or more people should carry

the PDP. Never lay the PDP on the

floor because of possible damage

to the screen. Always keep the

PDP upright.







The PDP can rotate 20 degrees in

right and left directions.

-20° ~ 20°

BN68-01808A-Eng.indb 4 2008-11-05 오후 2:56:58

(PS42A410)

English - 5

Control Panel

1

SOURCE

Toggles between all the available input sources

(TV, Ext.1, Ext.2, AV, S-Video, Component,

PC, HDMI1, HDMI2).

2

MENU

Press to see an on-screen menu of your TV’s

features.

3

– +

Press to increase or decrease the volume. In

the on-screen menu, use the – + buttons

as you would use the ◄ and ► buttons on the

remote control.

4

C/P.

Press to change channels. In the on-screen

menu, use the C/P. buttons as you

would use the ▲ and ▼ buttons on the remote

control.

5

ENTER

In the on-screen menu, use this button as you

would use the ENTER button on the remote

control.

6

POWER

Press to turn the TV on and off.

Power Indicator

Blinks and turns off when the power is on and

lights up in stand-by mode.

Remote Control Sensor

Aim the remote control towards this spot on the

TV.

7

Speakers

Front (or Side) Panel

➢

The product colour and shape may vary depending on the model.

7

BN68-01808A-Eng.indb 5 2008-11-05 오후 2:56:59

English - 6

Connection Panel

Continued...

☛





Whenever you connect an audio or video system to your set, ensure that all elements are

switched off.







When connecting an external device, match the colour of the connection terminal to the cable.

1

POWER IN

Connect the supplied power cord.

2

COMPONENT IN

Audio (AUDIO L/R) and video (Y/P

B/PR) inputs

for Component.

3

PC IN(PC) / (AUDIO)

Connect to the video and audio output jack on

your PC.

4

EXT 1, EXT 2

Inputs or outputs for external devices, such as

VCR, DVD, video game device or video disc

players.

Input/Output Specification

Connector

Input Output

Video Audio(L/R) RGB

Video + Audio(L/R)

EXT 1

✔ ✔ ✔

Only TV output is

available.

EXT 2

✔ ✔

Output you can

choose.

5

Connecting external Audio Devices

Connect RCA audio signals from the TV to an

external source, such as Audio equipment.

6

SERVICE

− Connector for service.

− Connect the serial jack between the

electro-motion wall mount bracket and your

TV when you want to adjust the TV viewing

angle using your remote control.

Rear Panel

➢

The product colour and shape may vary depending on the model.

Cable Television

Network

or

1

432 5 7

8

6

BN68-01808A-Eng.indb 6 2008-11-05 오후 2:57:02

Stránka se načítá ...

English - 8

Viewing the Remote Control

1

POWER button

(turns the TV on and off)

2

Selects the TV mode directly

3

Number buttons for direct

channel access

4

One/Two-digit channel

selection

5

Temporary sound switch-off

6

Volume increase

Volume decrease

7

Use to quickly select

frequently used functions.

8

Control the cursor in the

menu

9

Use to see information on

the current broadcast

@

Channel control button

(Refer to page 15)

#

Available source selection

$

Previous channel

%

Next channel

Previous channel

^

Returns to the previous

menu

&

Exit the on-screen menu

*

Displays the main on-screen

menu

(

Picture size selection

)

Selects the HDMI mode

directly

a

Picture effect selection

(Refer to page 18)

Teletext Functions

(Refer to page 30)

2

Exit from the teletext display

(depending on the model)

7

Teletext size

9

Teletext reveal

0

Fastext topic selection

!

Teletext display/mix both

teletext information and the

normal broadcast

12 Teletext store

#

Teletext mode selection

(LIST/FLOF)

$

Teletext sub page

%

P :Teletext next page

P :Teletext previous page

^

Teletext hold

&

Teletext cancel

*

Teletext index

Continued...

BN68-01808A-Eng.indb 8 2008-11-05 오후 2:57:04

Stránka se načítá ...

English - 10

Plug & Play Feature

When the television is initially powered on, several basic

customer settings proceed automatically and subsequently.

The following settings are available.

☛

If you accidentally select the wrong country for your TV, the

characters on the screen may be wrongly displayed.

1 If the television is in standby mode, press the POWER button

on the remote control. The message Start Plug & Play is

displayed. Press the ENTER button.

2 The Language menu will automatically appear after several

seconds.

3 Select the appropriate language by pressing the ▲ or ▼

button.

Press the ENTER button. The message Select Home Use

when installing this TV in your home. is displayed.

4 Press the ◄ or ► button to select Store Demo or Home Use,

then press the ENTER button. The message to check the

connected status of the antenna is displayed.

➢

The default selection is Home Use.

➢

We recommend setting the TV to Home Use mode for the

best picture in your home environment.

➢

Store Demo mode is only intended for use in retail

environments.

➢

If the unit is accidentally set to Store Demo mode and you

want to return to Home Use (Standard): Press the Volume

button. When the volume OSD is displayed, press and

hold the MENU button for 5 seconds.

5 Make sure that the antenna is connected to the TV.

Press the ENTER button. The Country menu is displayed.

6 Select your country or area by pressing the ▲ or ▼ button.

Press the ENTER button.

Continued...

Plug & Play

Start Plug & Play.

OK

Enter

Plug & Play

Language

Move

Enter

English

Deutsch

Français

Italiano

▼

Plug & Play

Select 'Home Use'

when installing this TV in your home.

Move

Enter

Store Demo

Home Use

Plug & Play

Check antenna input.

Enter

Skip

OK

Plug & Play

P 1 C -- 40 MHz

0 %

Enter

Skip

Start

Plug & Play

Country

▲

United Kingdom

Austria

Eastern Europe

Others

Move

Enter

Skip

BN68-01808A-Eng.indb 10 2008-11-05 오후 2:57:06

English - 11

7 Press the ENTER button to start search the channels.

The channel search will start and end automatically. After

all the available channels are stored, Clock Set menu is

automatically displayed. Press the ENTER button.

8 Press the ◄ or ► button to select Month, Day, Year, Hour,

or Minute. Set these by pressing the ▲ or ▼ button.

➢

You can set the Month, Day, Year, Hour, or Minute

directly by pressing the numeric buttons on the remote

control.

9 Press the ENTER button to confirm your setting. The

message Enjoy your viewing is displayed. When you have

finished, press the ENTER button.

➢

Even if the ENTER button is not pressed, the message

will automatically disappear after several seconds.

If you want to reset this feature …

1

Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Setup, then press the

ENTER button.

3 Press the ENTER button again to select Plug & Play.

The message Start Plug & Play is displayed.

Plug & Play

Move

Adjust

Enter

01 01 2008 12 : 00

Clock Set

Month Day Year Hour

Minute





OK

Enjoy your viewing

Move

Enter

Return

Plug & Play



Language : English 

Time 

Light Effect

: In Watching TV



Wall-Mount Adjustment



Melody : Off



Entertainment

:

Off



Energy Saving :

Off



PIP 

Setup

T V

BN68-01808A-Eng.indb 11 2008-11-05 오후 2:57:07

English - 12

Viewing External Signal Sources

You can switch between viewing signals from connected

equipment, such as a VCR, DVD, Set-Top Box, and the TV

source (broadcast or cable).

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Input, then press the

ENTER button.

3 Press the ENTER button again to select Source List.

4 Press the ▲ or ▼ button to select the signal source, then

press the ENTER button.

Available signal sources:

TV, Ext.1, Ext.2, AV, S-Video,

Component, PC, HDMI1, HDMI2.

➢

You can choose only those external devices that are connected

to the TV.

➢

You can select these options simply by pressing the SOURCE

button on the remote control.

➢

To watch television programme again, press the TV button and

select the channel number required.

➢

You can also watch HDMI mode simply by pressing the HDMI

button on the remote control.

Using the TOOLS Button

You can use the TOOLS button to select your frequently used functions quickly and easily. The

“Tools” menu changes depending on which external input mode you are viewing.

1 Press the TOOLS button.

The Tools menu will appear.

2 Press the ▲ or ▼ button to select a menu, then press the

ENTER button.

3 Press the ▲/▼/◄/►/ENTER buttons to display, change, or

use the selected items.

For a more detailed description of each function, refer to the

corresponding page.

• Picture Mode, see page 18

• Sound Mode, see page 23

• Sleep Timer, see page 25

• SRS TS XT, see page 23

• Energy Saving, see page 27

• Dual I-II, see page 24

• PIP, see page 26

• Auto Adjustment, see page 29

Move

Enter

Return

Source List :

TV 

Edit Name 

Input

T V

Move

Enter

Return

TV

Ext.1  :−−−−

Ext.2  :−−−−

AV  :−−−−

S-Video  :−−−−

Component :−−−−

PC  :−−−−

HDMI1  :−−−−

HDMI2  :−−−−

Source List

T V

Tools

PictureMode ◄ Standard ►

Sound Mode : Custom

Sleep Timer : Off

SRS TS XT : Off

Energy Saving : Off

Dual I-II : Mono

Adjust

ExitMove

BN68-01808A-Eng.indb 12 2008-11-05 오후 2:57:07

English - 13

Editing Device Names

You can give a name to the external source.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Input, then press the

ENTER button.

3 Press the ▲ or ▼ button to select Edit Name, then press the

ENTER button.

4 Press the ▲ or ▼ button to select the external source to be

edited, then press the ENTER button.

5 Select the required device by pressing ▲ or ▼, then press the

ENTER button.

Available device names:

VCR, DVD, Cable STB, Satellite

STB, PVR STB, AV Receiver, Game, Camcorder, PC, TV,

IPTV, Blu-Ray, HD DVD, DMA.

6 Press the EXIT button to exit.

Storing Channels Automatically

You can scan for the frequency ranges available to you

(availability depends on your country).

Automatically allocated programme numbers may not

correspond to actual or desired programme numbers.

However you can sort numbers manually and clear any

channels you do not wish to watch.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

3 Press the ENTER button again. The available countries are

listed.

4 Select your country by pressing the ▲ or ▼ button, then press

the ENTER button.

5 Press the ▲ or ▼ button to select Auto Store, then press the

ENTER button.

6 Press the ENTER button again to start the search.

The search will end automatically.

➢

To stop the search before it has finished, press the MENU

or the ENTER button.

Move

Enter

Return

Source List :

TV 

Edit Name 

Input

T V

Move

Enter

Return

Country :

United Kingdom



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

Channel

T V

Auto Store

P 1 C -- 40 MHz

0 %

Enter

Return

Start

Move

Enter

Return

Ext.1  :−−−−

Ext.2 : −−−−

AV :

S-Video :

Component : −−−−

PC : −−−−

HDMI1 :

HDMI2 :

Edit Name

T V

----

VCR

DVD

Cable STB

Satellite STB

PVR STB

AV Receiver

Game

▼

Move

Enter

Return

Country :

United Kingdom

Auto Store

Manual Store

Channel Manager

Sort

Name

Fine Tune

Channel

Belgium

France

Germany

Italy

Netherlands

Spain

Switzerland

United Kingdom

▼

T V

BN68-01808A-Eng.indb 13 2008-11-05 오후 2:57:08

Stránka se načítá ...

English - 15

Adding / Locking Channels

Using the Channel Manager, you can conveniently lock or add

channels.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

3 Press the ▲ or ▼ button to select Channel Manager, then

press the ENTER button.

Adding channels

Using the Channel List, you can add channels.

4 Select Channel List by pressing the ENTER button.

5 Move to the ( ) field by pressing the ▲/▼/◄/► buttons,

select a channel to be added, and press the ENTER button to

add the channel.

➢

If you press the ENTER button again, the ( ) symbol

next to the channel disappears and the channel is not

added.

Locking channels

This feature allows you to prevent unauthorized users, such as

children, from watching unsuitable programmes by muting out

video and audio.

6 Press the ▲ or ▼ button to select Child Lock, then press the

ENTER button.

7 Select On by pressing the ▲ or ▼ button, then press the

ENTER button.

8 Press the ▲ or ▼ button to select Channel List, then press

the ENTER button.

9 Move to the ( ) field by pressing the ▲/▼/◄/► buttons,

select a channel to be locked, and press the ENTER button.

➢

If you press the ENTER button again, the ( ) symbol next to the channel disappears and the

channel lock is canceled.

➢

A blue screen is displayed when Child Lock is activated.

10 Press the EXIT button to exit.

➢

You can select these options simply by pressing the CH LIST

button on the remote control.

Move

Enter

Return

Country :

United Kingdom



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

Channel

T V

Move

Enter

Return

Channel List



Child Lock : Off 

Channel Manager

T V

Channel List

P 1 C --

1 / 10

▲

▼

Prog.

0

C 01

1 C −−

2 C −−

3 C −−

4 C −−

5 C −−

6 C −−

7 C −−

8 C −−

9 C

−−

Add Lock

Move Enter

Page Return

BN68-01808A-Eng.indb 15 2008-11-05 오후 2:57:10

English - 16

Sorting the Stored Channels

This operation allows you to change the programme numbers

of the stored channels.

This operation may be necessary after using the auto store.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

3 Press the ▲ or ▼ button to select Sort, then press the ENTER

button.

4 Select the channel that you wish to move by pressing the ▲ or

▼ button, then press the ENTER button.

5 Select the number of the programme to which the channel is to

be moved by pressing the ▲ or ▼ button.

Press the ENTER button. The channel is moved to its new

position and all other channels are shifted accordingly.

6 Repeat steps 4 to 5 until you have moved all the channels to

the required programme numbers.

7 Press the EXIT button to exit.

Assigning Names to Channels

Channel names will be assigned automatically when channel

information is broadcast. These names can be changed,

allowing you to assign new names.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

3 Press the ▲ or ▼ button to select Name, then press the

ENTER button.

4 Press the ▲ or ▼ button to select the channel to be assigned

to a new name, then press the ENTER button.

5 Press the ▲ or ▼ button to select a letter, a number, or a

symbol (Results in this sequence: A~Z, 0~9, +, -, *, /, blank).

Move on to the previous or next letter by pressing the ◄ or ►

button, then press the ENTER button.

6 Repeat steps 4 to 5 for each channel to be assigned to a new

name.

7 Press the EXIT button to exit.

Move

Enter

Return

Country :

United Kingdom



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

Channel

T V

Move

Enter

Return

Prog. Ch. Name

▲

 0 C-- −−−−− 

 1 C04 −−−−−

 2 C05 −−−−−

 3 C08 −−−−−

4 C09 −−−−−

5 C11 −−−−−

6 C13 −−−−−

7 C15 −−−−−

8 C17 −−−−−

9 C18 −−−−−

▼

Sort

T V

Move

Enter

Return

Prog. Ch. Name

▲

 0 C-- −−−−−

 1 C04 −−−−−

 2 C05 −−−−−

 3 C08 −−−−−

4 C09 −−−−−

5 C11 −−−−−

6 C13 −−−−−

7 C15 −−−−−

8 C17 −−−−−

9 C18 −−−−−

▼

Name

T V

Move

Enter

Return

Country :

United Kingdom



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

Channel

T V

BN68-01808A-Eng.indb 16 2008-11-05 오후 2:57:10

English - 17

Fine Tuning Channel Reception

If the reception is clear, you do not have to fine tune the

channel, as this is done automatically during the search and

store operation.

If the signal is weak or distorted, you may have to fine tune the

channel manually.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Channel, then press the

ENTER button.

3 Press the ▲ or ▼ button to select Fine Tune, then press the

ENTER button.

4 To obtain a sharp, and clear picture and good sound quality,

press the ◄ or ► button until you reach the optimal setting.

Press the ENTER button.

➢

Fine Tune Store will change the colour of the Channel

OSD (On Screen Display) from White to Red and add the

“*” mark.

➢

To reset the fine tuning to 0, select Reset by pressing the

▲ or ▼ button. Press the ENTER button.

5 Press the EXIT button to exit.

Fine Tune

P 1

0

Adjust

Save

Return

Reset

P 1 *

Mono

Picture : Standard

Sound : Custom

SRS TS XT : Off

−−

:

−−

Move

Enter

Return

Country :

United Kingdom



Auto Store 

Manual Store 

Channel Manager 

Sort 

Name 

Fine Tune 

Channel

T V

BN68-01808A-Eng.indb 17 2008-11-05 오후 2:57:11

English - 18

Customizing the Picture Settings

Your television has several setting options that allow you to

control the picture quality.

1 Press the MENU button to display the menu.

2 Press the ENTER button to select Picture.

3 Press the ENTER button again to select Mode.

4 Select the required mode by pressing the ▲ or ▼ button, then

press the ENTER button.

Available modes:

Dynamic, Standard, Movie

5 Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.

6 When you are satisfied with your setting, press the ENTER button.

7 Press the EXIT button to exit.

Cell Light - Contrast – Brightness – Sharpness – Colour – Tint

➢

In Analog TV, Ext., AV, S-Video modes of the PAL system, you cannot use the Tint Function.

➢

In PC mode, you can only make changes to Cell Light, Contrast, and Brightness.

Press the ◄ or ► button until you reach the optimal setting.

Changing the Picture Standard

You can select the type of picture which best corresponds to

your viewing requirements.

1 Press the MENU button to display the menu.

2 Press the ENTER button to select Picture.

3 Press the ENTER button again to select Mode.

4 Select the required mode by pressing the ▲ or ▼ button, then

press the ENTER button.

Available modes:

Dynamic, Standard, Movie

➢

The settings values may vary depending on the input

source.

5 Press the EXIT button to exit.

➢





Choose Dynamic for viewing the TV during the day or

when there is bright light in the room.

 



Choose Standard for general TV watching mode.

 



Choose Movie when viewing the movie.

Easy Setting

1 Press the TOOLS button on the remote control.

2 Press the ▲ or ▼ button to select Picture Mode.

3 Press the ◄ or ► button to select the required option.

Move

Enter

Return

Mode : Standard

Cell Light 7

Contrast 95

Brightness 45

Sharpness 50

Colour 50

Tint G50 R50

Detailed Settings

Picture Options

Reset : OK

Picture

T V

Dynamic

Standard

Movie

Move

Enter

Return

Mode : Standard



Cell Light 7

Contrast 95

Brightness 45

Sharpness 50

Colour 50

Tint G50 R50

Detailed Settings 

Picture Options 

Reset : OK 

Picture

T V

Tools

PictureMode ◄ Standard ►

Sound Mode : Custom

Sleep Timer : Off

SRS TS XT : Off

Energy Saving : Off

Dual I-II : Mono

Adjust

Exit

Move

Enter

Return

Mode : Standard



Cell Light 7

Contrast 95

Brightness 45

Sharpness 50

Colour 50

Tint G50 R50

Detailed Settings 

Picture Options 

Reset : OK 

Picture

T V

BN68-01808A-Eng.indb 18 2008-11-05 오후 2:57:12

Stránka se načítá ...

English - 20

Picture Options

You can set detailed picture settings.

1 Press the MENU button to display the menu.

2 Press the ENTER button to select Picture.

3 Press the ▲ or ▼ button to select Picture Options, then press

the ENTER button.

4 Select the required option by pressing the ▲ or ▼ button, then

press the ENTER button.

5 When you are satisfied with your setting, press the ENTER

button.

6 Press the EXIT button to exit.

➢

In PC mode, you can only make changes to the Color Tone,

Size and Screen Burn Protection from among the items in

Picture Options.

Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2

➢

When the picture mode is set to Dynamic or Standard,

Warm1 and Warm2 cannot be selected.

Size: Auto Wide/16:9/Wide Zoom/Zoom/4:3/Just Scan

You can select the picture size which best corresponds to your

viewing requirements.

−

Auto Wide: Expanding and pulling up the picture from 4:3 to

16:9 ratio.

− 16:9

: Sets the picture to 16:9 wide mode.

−

Wide Zoom: Magnify the size of the picture more than 4:3.

Move the screen up/down using the ▲ or ▼ button after

selecting the by pressing the ► or ENTER button.

−

Zoom: Magnify the size of the picture vertically on screen.

− 4:3

: Sets the picture to 4:3 normal mode.

−

Just Scan: Use the function to see the full image without any

cutoff when HDMI (720p/1080i) or Component (1080i) signals

are input.

After selecting Just Scan in HDMI (1080i) or Component

(1080i) mode

:

Press the ◄ or ► button to select

, then press the ENTER button.

Press the ▲, ▼, ◄ or ► button to move the picture up, down, left and right.

Reset: Press the ◄ or ► button to select Reset, then press the ENTER button. You can initialize

the setting.

  ➢

With the HDMI Just Scan picture size, depending on the AV devices, the screen may be cut off

or a specific colour appears on the screen.

➢

For an HDMI (1080p) connection of 24, 25, 30, 50, and 60 Hz, and for a Component (1080p)

connection of 50 and 60Hz, only the input source is supported.

➢

You can change the picture size simply by pressing the P.SIZE button on the remote control.

➢

Depending on the input source, the picture size options may vary.

➢

The items available may differ depending on the selected mode.

➢

Auto Wide function is available only in TV, Ext.1, Ext.2, AV, and S-Video mode.

➢

Settings can be adjusted and stored for each external device you have connected to an input of the

TV.

➢

In PC Mode, only “16:9” and “4:3” mode can be adjusted.

Positioning and Sizing the screen using Zoom

Resizing the screen using the Zoom enables the positioning and sizing of the screen to up/down

direction using the ▲ or ▼ button as well as the screen size.

Move the screen up/down using the ▲ or ▼ button after selecting the by pressing the ◄ or ►

button.

Resize the screen vertically using the ▲ or ▼ button after selecting the by pressing the ◄ or ►

button.

Continued...

Move

Enter

Return

Colour Tone :

Normal 

Size : Auto Wide 

Screen Mode : 16:9 

Digital NR : Auto 

DNle : On 

HDMI Black Level : Normal 

Blue only mode : Off 

Screen Burn Protection 

Picture Options

T V

Move

Enter

Return

Mode : Standard



Cell Light 7

Contrast 95

Brightness 45

Sharpness 50

Colour 50

Tint G50 R50

Detailed Settings 

Picture Options 

Reset : OK 

Picture

T V

Move

Enter

Return

Auto Wide

16:9

Wide Zoom

Zoom

4:3

Just Scan

Size

T V

BN68-01808A-Eng.indb 20 2008-11-05 오후 2:57:13

Stránka se načítá ...

English - 22

 ➢

Optimum condition for pixel shift;

PC TV/Ext/AV/Component/HDMI

Horizontal Dot 1 2

Vertical Line 1 2

Time (minute) 2 2 min

 ➢

The Pixel Shift value may differ depending on the monitor

size (inches) and mode.

➢

This function is not available in the Just Scan mode.

− White: This function helps remove after images on the screen by changing the colour of pixels to

white. Use this function when there are remaining after images or symbols on the screen especially

when you displayed a still image on the screen for a long time.

−

Scrolling: This function helps remove after images on the screen by moving all the pixels on the

PDP according to a pattern. Use this function when there are remaining after images or symbols on

the screen especially when you displayed a still image on the screen for a long time.

−

Side Gray: When you watch TV with the screen ratio of 4:3, the screen is prevented from any

damage by adjusting the white balance on both extreme left and right sides.

Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.

Light: When you set the screen ratio to 4:3, it brightens the left and right sides.

 ➢

To remove after images on the screen, use either White or Scrolling function. Although both of

the two functions remove after images on the screen, Scrolling is more effective.

 ➢

The after image removal function has to be executed for a long time (approximately 1 hour) to

effectively remove after images on the screen. If after image is not improved after the execution

of the function, repeat the function again.

 ➢

Press any button on the remote control to cancel this feature.

Resetting the Picture Settings to the Factory Defaults

You can set detailed picture settings.

1 Press the MENU button to display the menu.

2 Press the ENTER button to select Picture.

3 Press the ▲ or ▼ button to select Reset, then press the

ENTER button.

4 Press the ▲ or ▼ button to select OK or Cancel then press

the ENTER button.

 ➢

Each mode can be reset.

Move

Enter

Return

Pixel Shift :

On 

Horizontal Dot : 2 

Vertical Line : 2 

Time : 2 min 

Pixel Shift

T V

Move

Enter

Return

Mode : Standard

Cell Light 7

Contrast 95

Brightness 45

Sharpness 50

Colour 50

Tint G50 R50

Detailed Settings

Picture Options

Reset : OK

Picture

T V

OK

Cancel

BN68-01808A-Eng.indb 22 2008-11-05 오후 2:57:14

Stránka se načítá ...

English - 24

Selecting the Sound Mode (depending on the model)

The DUAL I-II button displays/controls the processing and output of the audio signal. When power

is switched on, the mode is automatically preset to either “DUAL-I” or “Stereo”, depending on the

current transmission.

Easy Setting

1 Press the TOOLS button on the remote control.

2 Press the ▲ or ▼ button to select Dual I-II.

3 Press the ◄ or ► button to select the required option.

Type of broadcast On-screen indication

NICAM

Stereo

Regular broadcast

(Standard audio)

Mono (Normal use)

Regular + NICAM Mono NICAM

Mono

(Normal)

NICAM Stereo

NICAM

stereo

Mono

(Normal)

NICAM DUAL-I/II

NICAM

dual-1

NICAM

dual-2

Mono

(Normal)

A2

Stereo

Regular broadcast

(Standard audio)

Mono (Normal use)

Bilingual or DUAL-I/II Dual I Dual II

Stereo Stereo

Mono

(Forced mono)

➢





If the receiving conditions deteriorate, listening will be easier if the mode is set to Mono.

 



If the stereo signal is weak and automatic switching occurs, switch to Mono.

Connecting Headphones (Sold separately)

You can connect a set of headphones to your set if you wish to watch a TV programme without

disturbing other people in the room.

➢

When you insert the head set jack into the corresponding

port, you can operate only “Auto Volume” in Sound menu.

➢

Prolonged use of headphones at a high volume may

damage your hearing.

➢

You will not hear sound from the speakers when you connect

headphones to the TV.

➢

The headphone volume and TV volume are adjusted

separately.

TV Side Panel

Tools

Picture Mode : Standard

Sound Mode : Custom

Sleep Timer : Off

SRS TS XT : Off

Energy Saving : Off

DualI-II ◄ Mono ►

Exit

Adjust

Move

BN68-01808A-Eng.indb 24 2008-11-05 오후 2:57:15

Stránka se načítá ...

English - 28

Input Mode (PC)

Both screen position and size will vary depending on the type of PC monitor and its resolution.

The table below shows all of the display modes that are supported:

D-Sub Input

Mode

Resolution

Horizontal

Frequency

(kHz)

Vertical

Frequency

(Hz)

Pixel Clock

Frequency

(MHz)

Sync

Polarity

(H/V)

PS42A410/

PS42A412

PS50A410/

PS50A412

IBM

640 x 350

720 x 400

31.469

70.086

70.087

25.175

28.322

+ / -

- / +

✔

VESA

640 x 480

800 x 600

1024 x 768

1360 x 768

31.469

37.861

37.500

37.879

48.077

46.875

48.363

56.476

60.023

47.712

59.940

72.809

75.000

60.317

72.188

75.000

60.004

70.069

75.029

60.015

25.175

31.500

40.000

50.000

49.500

65.000

75.000

78.750

85.500

- / -

+ / +

- / -

+ / +

✔

HDMI/DVI Input

Mode

Resolution

Horizontal

Frequency

(kHz)

Vertical

Frequency

(Hz)

Pixel Clock

Frequency

(MHz)

Sync

Polarity

(H/V)

PS42A410/

PS42A412

PS50A410/

PS50A412

VESA

640 x 480

800 x 600

1024 x 768

1360 x 768

31.469

37.879

48.363

47.712

59.940

60.317

60.004

60.015

25.175

40.000

65.000

85.500

- / -

+ / +

- / -

+ / +

✔

When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.

The interlace mode is not supported.

The set might operate abnormally if a non-standard video format is selected.

Separate and Composite modes are supported. SOG is not supported.

For the PS42A410/PS42A412, PC text quality is optimum in VESA mode(1024 x 768@60Hz).

For the PS50A410/PS50A412, PC text quality is optimum in VESA mode (1360 x 768@60Hz).

BN68-01808A-Eng.indb 28 2008-11-05 오후 2:57:18

English - 29

Setting the PC

➢

Preset to the PC mode by pressing the SOURCE button.

1 Press the MENU button to display the menu.

2 Press the ▲ or ▼ button to select Picture, then press the

ENTER button.

3 Select the required option by pressing the ▲ or ▼ button, then

press the ENTER button.

4 When you are satisfied with your setting, press the ENTER

button.

5 Press the EXIT button to exit.

Auto Adjustment :

Auto adjustment allows the PC screen of set to self-adjust to

the incoming PC video signal.

The values of fine, coarse and position are adjusted

automatically.

Easy Setting

1 Press the TOOLS button on the remote control.

2 Press the ▲ or ▼ button to select Auto Adjustment, then

press the ENTER button.

Screen Adjustment: Coarse/Fine/Position/Image Reset

Coarse/Fine

The purpose of picture quality adjustment is to remove or

reduce picture noise.

If the noise is not removed by Fine-tuning alone, then adjust

the frequency as best as possible (coarse) and Fine-tune

again.

After the noise has been reduced, re-adjust the picture so that

it is aligned on the center of screen.

1 Press the ▲ or ▼ button to select Coarse or Fine, then

press the ENTER button.

2 Press the ◄ or ► button to adjust the screen quality,

vertical stripes may appear or the picture may be blurry.

Press the ENTER button.

 Position

Adjust the PC’s screen positioning if it does not fit the TV

screen.

1 Adjust the position by pressing the ▲/▼/◄/► button.

2 Press the ENTER button.

 Image Reset

You can replace all image settings with the factory default

values.

Move

Enter

Return

Coarse 50

Fine 11

Position 

Image Reset 

Screen Adjustment

T V

Auto Adjustment in Progress

Please wait.

Image Reset is completed.

Move

Enter

Return

Mode :

Standard 

Cell Light 7

Contrast 95

Brightness 45

Sharpness 50

Auto Adjustment 

Screen Adjustment 

Detailed Settings 

Picture Options 

Reset : OK 

Picture

T V

Move

Enter

Return

Position

T V

Tools

Picture Mode : Standard

Sound Mode : Custom

Sleep Timer : Off

SRS TS XT : Off

Energy Saving : Off

PIP

Auto Adjustment

ExitMove

Enter

BN68-01808A-Eng.indb 29 2008-11-05 오후 2:57:19

Stránka se načítá ...

English - 31

The teletext pages are organized according to six categories:

Part Contents

A

B

C

D

E

F

Selected page number.

Broadcasting channel identity.

Current page number or search indications.

Date and time.

Text.

Status information.

FASTEXT information.

➢

Teletext information is often divided between several pages

displayed in sequence, which can be accessed by:





Entering the page number





Selecting a title in a list





Selecting a coloured heading (FASTEXT system)

➢

Press the TV button to exit from the teletext display.

BN68-01808A-Eng.indb 31 2008-11-05 오후 2:57:22

English - 32

Wall Mount Kit Specifications (VESA)

Install your wall mount on a solid wall perpendicular to the floor.

When attaching to other building materials, please contact your nearest dealer.

If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.

Product Family inch VESA Spec. (A * B) Standard Screw Quantity

LCD-TV

23 ~ 26 200

*

100 M4

4

32 ~ 40 200

*

200 M6

46 ~ 52

400 * 400

600 * 400

M8

57

700 * 400

(No VESA)

57 ~ 70 800 * 400

80 ~ 1400 * 800

PDP-TV

42 ~ 58

400 * 400

600 * 400

M8

4

63

676 * 407

(No VESA)

6

63 ~ 70 800 * 400 4

80 ~ 1400 * 800 4

➢

We provided the standard dimensions for wall mount kits as shown in the table above.

➢

When purchasing our wall mount kit, a detailed installation manual and all parts necessary for

assembly are provided.

➢

Do not use screws longer than the standard dimension, as they may cause damage to the inside of

the TV set.

➢

For wall mounts that do not comply with the VESA standard screw specifications, the length of the

screws may differ depending on their specifications.

➢

Do not use screws that do not comply with the VESA standard screw specifications.

Do not use fasten the screws too strongly, this may damage the product or cause the product to fall,

leading to personal injury. Samsung is not liable for these kinds of accidents.

➢

Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall

mount is used or the consumer fails to follow the product installation instructions.

➢

Our 57” and 63” models do not comply with VESA Specifications. Therefore, you should use our

dedicated wall mount kit for this model.

➢

Do not exceed 15 degrees tilt when mounting this TV.



Do not install your Wall Mount Kit while your TV is turned on.

It may result in personal injury due to electric shock.

BN68-01808A-Eng.indb 32 2008-11-05 오후 2:57:22

Stránka se načítá ...

Samsung PS42A410 Uživatelský manuál

Samsung PS42A410 Uživatelský manuál

v jiných jazycích

Související papíry

Jiné dokumenty