Viper FANG 20HD-EU Uživatelský manuál

Kategorie
Vysavače
Typ
Uživatelský manuál
V
F82881EU REV:02 2014.03.25
User Manual
Original instructions
FANG 20HD-EU
ENGLISH
OPERATING LNSTRUCTIONS..................................................................... 1-6, 7-26
DEUTSCH BEDİENUNGSANLEİTUNG......................................................................... 1-6, 27-48
FRANÇAİS MANUEL D’UTILISATION.......................................................................... 1-6, 49-69
NEDERLANDS GEBRUIKERS HANDLEIDING................................................................... 1-6, 70-89
ITALIANO ISTRUZIONI PER L’USO...................................................................................
1-6, 90-110
ESPAÑOL MANUAL DE USUARIO............................................................................... 1-6, 111-130
PORTUGUÊS MANUAL DO UTILIZADOR.......................................................................
1-6, 131-150
ΕΛΛΗΝΙΚΆ ΕΓΧΕΙΡΊ∆ΙΟ ΧΡΉΣΤΗ................................................................................. 1-6, 151-174
TÜRKÇE KULLANIM KILAVUZU...............................................................................
1-6, 175-194
ČESKÝ
NÁVOD K OBSLUZE..................................................................................... 1-6, 195-214
POLSKI INSTRUKCJA OBSŁUGI..............................................................................
1-6, 215-234
MAGYAR KEZELÉSI UTASÍTÁS.................................................................................. 1-6, 235-254
ROMÂNĂ MANUAL DE UTILIZARE........................................................................... 1-6, 255-274
РУССКИЙ РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ......................................................... 1-6, 275-295
БЪЛГАРСКИ РЪКОВОДСТВО НА ПОТРЕБИТЕЛЯ..............................................
1-6, 296-316
Company information:
www.vipercleaning.eu
i
VF82881EU REV:01 2012.10.30 FANG 20HD-EU
1
2
FANG 20HD-EU VF82881EU REV:01 2012.10.30
VF82881EU REV:01 2012.10.30 FANG 20HD-EU
3
4
FANG 20HD-EU VF82881EU REV:01 2012.10.30
VF82881EU REV:01 2012.10.30 FANG 20HD-EU
5
6
FANG 20HD-EU VF82881EU REV:01 2012.10.30
USER MANUAL
VF82881EU REV:01 2012.10.30 FANG 20HD-EU
7
ENGLISH
TABLE OF CONTENT
INTRODUCTION………………………………………………………………………………………………………… 8
MANUAL PURPOSE AND CONTENTS………………………………………………………………………………… 8
TARGET ……………………………………………………………………………………………………………………8
HOW TO KEEP THIS MANUAL………………………………………………………………………………………… 8
DECLARATION OF CONFORMITY…………………………………………………………………………………… 8
IDENTIFICATION DATA…………………………………………………………………………………………………8
OTHER REFERENCE MANUALS……………………………………………………………………………………… 8
SPARE PARTS AND MAINTENANCE………………………………………………………………………………… 8
CHANGES AND IMPROVEMENTS…………………………………………………………………………………… 8
PURPOSE AND INTENDED USE…………………………………………………………………………………… 8
CONVENTIONS………………………………………………………………………………………………………… 9
UNPACKING/DELIVERY……………………………………………………………………………………………… 9
SAFETY…………………………………………………………………………………………………………………9
SYMBOLS USED TO MARK INSTRUCTIONS………………………………………………………………………… 9
GENERAL INSTRUCTIONS……………………………………………………………………………………………10
MACHINE DESCRIPTION………………………………………………………………………………………………13
MACHINE STRUCTURE………………………………………………………………………………………………13
ACCESSORIES/OPTIONS………………………………………………………………………………………………14
WIRING DIAGRAM (FANG20HD-EU )………………………………………………………………………………16
OPERATION………………………………………………………………………………………………………………17
BEFORE STARTING THE MACHINE…………………………………………………………………………………..17
WHILE OPERATING MACHINE…………………………………………………………………………………… .21
MAINTENANCE…………………………………………………………………………………………………………23
DAILY MAINTENANCE…………………………………………………………………………………………………23
WEEKLY MAINTENANCE……………………………………………………………………………………………23
MONTHLY MAINTENANCE……………………………………………………………………………………………23
VACUUM SYSTEM MOTOR FILTER CLEANING……………………………………………………………………23
SOLUTION/CLEAN WATER FILTER CLEANING……………………………………………………………………24
SQUEEGEE BLADE CHECK AND REPLACEMENT…………………………………………………………………24
BRUSH/PAD CLEANING………………………………………………………………………………………………25
TROBLESHOOTING……………………………………………………………………………………………………25
STORAGE…………………………………………………………………………………………26
RECYCLING THE CLEANER…………………………………………………………………………………………26
USER MANUAL
8
FANG 20HD-EU VF82881EU REV:01 2012.10.30
ENGLISH
INTRODUCTION
NOTE
The numbers in brackets refer to the components shown in Machine Description chapter.
MANUAL PURPOSE AND CONTENTS
The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and
au-tonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and
disposal. Before performing any procedure on the machine, the operators and qualified technicians must read this manual
carefully. Contact Viper in case of doubts concerning the interpretation of the instructions and for any further information.
TARGET
This manual is intended for operators and technicians qualified to perform the machine maintenance.
The operators must not perform procedures reserved for qualified technicians. Viper will not be answerable for damages
coming from the non-observance of this prohibition.
HOW TO KEEP THIS MANUAL
The User Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that can
cause damage to it.
DECLARATION OF CONFORMITY
The declaration of conformity, supplied with the machine, certifies the machine conformity with the law in force.
NOTE
Two copies of the original declaration of conformity are provided together with the machine documentation.
The CE-declaration is printed in the Quick Start Guide.
IDENTIFICATION DATA
The machine model and serial number are marked on the plate.
This information is useful when requiring machine spare parts. Use the following table to write down the machine
identification data.
MACHINE mode....................................................
..............
MACHINE serial number.......................................................
OTHER REFERENCE MANUALS
− Service Manual (can be consulted at Viper Service Centers)
− Spare Parts List (see www.vipercleaning.eu)
SPARE PARTS AND MAINTENANCE
All necessary operating, maintenance and repair procedures must be performed out by qualified personnel or by Viper Service
Centers. Only original spare parts and accessories must be used. Contact Viper for service or to order spare parts and
accessories, specifying the machine model and serial number.
CHANGES AND IMPROVEMENTS
Viper constantly improves its products and reserves the right to make changes and improvements at its discretion without being
obliged to apply such benefits to the machines that were previously sold.
Any change and/or addition of accessories must be approved and performed by Viper.
PURPOSE AND INTENDED USE
All automatic cleaning machines are exclusively intended for the wet cleaning of water-resistant floor coverings in building
interiors.
USER MANUAL
VF82881EU REV:01 2012.10.30 FANG 20HD-EU
9
ENGLISH
The automatic cleaning machines cannot be used for fitted carpet and carpet cleaning.
This appliance is suitable for commercial use, for example in hotels, schools, hospitals, factories, shops, offices and rental
businesses.
Any other use is considered as improper use. The manufacturer accepts no liability for any damage resulting from such use.
The risk for such use is borne solely by the user.
Proper use also includes proper operation, servicing and repairs as specified by the manufacturer.
Changes made to the automatic machines by the users themselves rule out the liability of the manufacturer for any resultant
damage.
Floor coverings are to be checked with regard to the suitability of this cleaning method before the use of the machine!
Note the surface pressure in the case of point-elastic floors, e.g. in gymnasiums!
The manufacturer accepts no liability for damage to the machine and the floor covering to be cleaned which is caused by the
use of the wrong brushes and cleaning agents.
CONVENTIONS
Forward, backward, front, rear, left or right and up are intended with reference to the operators position, that is to say in
working position.
UNPACKING/DELIVERY
To unpack the machine, carefully follow the instructions on the packing.
When the machine is delivered, check that the packing and the machine were not damaged during transportation. In case of
visible damages, keep the packing and have it checked by the carrier that delivered it. Call the carrier immediately to fill in a
damage claim.
Check contents of package to ensure that the following items are included:
− machine
− squeegee assembly
− brush driver (and pad driver)
SAFETY
The following symbols indicate potentially dangerous situations. Always read this information carefully and take all necessary
precau-tions to safeguard people and property.
The operators cooperation is essential in order to prevent injury. No accident prevention program is effective without the total
coop-eration of the person responsible for the machine operation. Most of the accidents that may occur in a factory, while
working or moving around, are caused by failure to comply with the simplest rules for exercising prudence. A careful and
prudent operator is the best guarantee against accidents and is essential for successful completion of any prevention program.
SYMBOLS USED TO MARK INSTRUCTIONS
DANGER!
Danger that leads directly to serious or irreversible injuries, or even death.
WARNING!
Danger that can lead to serious injuries or even death.
CAUTION!
Danger that can lead to minor injuries and damage.
USER MANUAL
10
FANG 20HD-EU VF82881EU REV:01 2012.10.30
ENGLISH
NOTE
Indicates a remark related to important or useful functions.
GENERAL INSTRUCTIONS
Specific warnings and cautions to inform about potential damages to people and machine are shown below.
The appliance must
only be used by persons, who have been instructed in its correct usage and explicitly commissioned with the task of
operating it
− only be operated under supervision
− not be used by children
The workplace is behind the cleaner.
Do not use any unsafe work techniques.
Always guide the cleaner with both hands on the handle.
When the cleaner is stationary, switch off the brush unit immediately to prevent damage to the floor covering.
Switch off the appliance and disconnect the battery plug in the following situations:
− Prior to cleaning and servicing
− Prior to replacing components
− Prior to changing over the appliance
Use of the cleaner is subject to current national regulations. Besides the operating instructions and binding accident prevention
regu-lations valid in the country of use, observe recognized regulations for safe and proper work.
TRANSPORT
When transporting the cleaner in elevators
− observe current safety regulations, in particular with regard to carrying capacity.
OPERATION
In order to prevent unauthorized use of the appliance, the power source is to be switched off or locked, for example, by
removing the key of the power switch.
Take all necessary precautions to prevent hair, jewels and loose clothes from being caught by the machine moving parts.
Before using the machine, close all doors and/or covers.
The machine working temperature must be between 0°C and +40°C.
The humidity must be between 30% and 95%.
Do not use the machine as a means of transport.
In case of fire, use a powder fire extinguisher, not a water one.
Do not tamper with the machine safety guards and follow the ordinary maintenance instructions scrupulously.
Do not allow any object to enter into the openings. Do not use the machine if the openings are clogged. Always keep the
openings free from dust, hairs and any other foreign material which could reduce the air flow.
Do not remove or modify the plates affixed to the machine.
If the machine is used according to the instructions, the vibrations are not dangerous. The machine vibration level is less than
2.5 m/s
2
(98/37/EEC-EN 1033/1995).
The Hand/arm vibration levels are well below 2,5 m/s
2
(measured according to ISO 5349), which is the limit for an 8 hour
continuous working period.
This machine must not be used on roads or public streets.
Viper machines can be used in combination with standard detergents which cannot damage any materials of Viper machines
(no use of solvents or other aggressive liquid materials). Viper will not pay any claims regarding using aggressive detergents in
Viper machines. If you need a special detergent for cleaning purposes, please contact your Viper dealer.
Pay attention during machine transportation when temperature is below freezing point. The water in the tank or in the hoses
could freeze and seriously damage the machine.
USER MANUAL
VF82881EU REV:01 2012.10.30 FANG 20HD-EU
11
ENGLISH
MAINTENANCE
To ensure machine proper and safe operation, the scheduled maintenance shown in the relevant chapter of this manual, must be
performed by the authorised personnel or by Viper Service Center.
Carefully read all the instructions before performing any maintenance/repair procedure.
Do not work under the lifted machine without supporting it with safety stands.
Do not wash the machine with direct or pressurised water jets, or with corrosive substances.
GUARANTEE
Our general conditions of business are applicable with regard to the guarantee.
Unauthorised modifications to the appliance, the use of incorrect brushes and detergents in addition to using the appliance in a
way other than for the intended purpose exempt the manufacturer from any liability for the resulting damage.
TESTS AND APPROVALS
Electrical tests must be performed in accordance with the provisions of safety regulations (BGV A3) and to DIN VDE 0701
Part 1 and Part 3.
In accordance with DIN VDE 0702 these tests must be performed at regular intervals and after repairs or modifications.
ELECTRICAL COMPONENTS
DANGER
Batteries.
Risk of explosion.
Battery charging produces highly explosive hydrogen gas. Keep the tank assembly open during battery
charging and perform this procedure in well-ventilated areas and away from naked flames.
To reduce the risk of fire, electric shock, or injury, do not leave the machine unattended when it is
plugged in. Before performing any maintenance procedure, disconnect the battery charger cable from the
electrical mains.
Do not smoke while charging the batteries.
The use of non-genuine spare parts, accessories, batteries and chargers can impair the safety of the
appliance. Only use spare parts and accessories from Viper and use batteries and chargers which VIPER
recommend. When using non-certified and not recommended batteries and chargers, VIPER will not
cover the cost of damages (warranty) caused of this.
CAUTION
Battery charger.
Electric shock due to faulty mains connecting lead or charger cable.
Touching a faulty mains connecting lead or charger cable can result in serious or even fatal injuries.
Keep the battery away from sparks, flames and incandescent material. During the normal operation
explosive gases are released.
Before using the battery charger, ensure that frequency and voltage values, indicated on the machine
serial number plate, match the electrical mains voltage.
Do not damage the mains power lead (e.g. by driving over it, pulling or crushing it).
Regularly check whether the power cord is damaged or shows signs of ageing.
Have the faulty mains connecting lead replaced by your Viper service representative or a qualified
electrician prior to using the appliance again.
Do not pull or carry the machine by the battery charger cable and never use the battery charger cable as a
handle. Do not close a door on the battery charger cable, or pull the battery charger cable around sharp
edges or corners.
USER MANUAL
12
FANG 20HD-EU VF82881EU REV:01 2012.10.30
ENGLISH
Keep the battery charger cable away from heated surfaces.
Do not charge the batteries if the battery charger cable or the plug are damaged. If the machine is not
working as it should, has been damaged, left outdoors or dropped into water, return it to the Service
Center.
STAIRS AND GRADIENTS
CAUTION
Risk of tipping and slipping on stairs and gradients.
When negotiating stairs and gradients, there is a risk of personal injuries and damage to property.
Do not negotiate steps.
Only use the appliance on level surfaces with a maximum gradient of 2 %.
FLOOR COVERINGS
CAUTION
Damage to sensitive floor coverings.
Particularly sensitive floor coverings can be damaged by cleaning.
Before using the cleaner, check whether floor coverings are suitable for this cleaning technique.
Beware of area compression in point-elastic floors, e.g. in gym halls.
Only use cleaning agents approved by Viper.
MATERIALS HAZARDOUS TO HEALTH
WARNING
Materials hazardous to health in floor coverings.
Floor coverings can contain materials that are hazardous to health, which dissolve during cleaning.
Do not clean floor coverings from which dusts or liquids that are hazardous to health can dissolve.
RISK OF EXPLOSION
WARNING
Flammable and explosive materials.
Risk of explosion in explosive atmosphere or areas where flammable and explosive materials are stored.
Do not operate the machine near dangerous, flammable and/or explosive powders, liquids or vapours.
SPARE PARTS AND ACCESSORIES
CAUTION
Non-genuine components and unsuitable detergents.
The use of non-genuine parts and unsuitable detergents can impair the safety of the appliance and lead to
damage.
Only use spare parts and accessories from Viper.
Only use the accessories and detergents supplied with the appliance or those specified in the operating
instructions.
USER MANUAL
VF82881EU REV:01 2012.10.30 FANG 20HD-EU
13
ENGLISH
MACHINE DESCRIPTION
MACHINE STRUCTURE
1. Main power ON/OFF switch
2. Vacuum ON/OFF switch
3. Battery level meter
4. Brush ON/OFF switch
5. Brush pressure meter
6. Solution ON/OFF switch
7. Brush pressure UP/DOWN switch
8. Solution control knob
9. Speed control knob
10. Circuit breakers
11. Recovery tank drain hose
12. Squeegee adjustment nut & shaft
13. Squeegee assembly
14. Scrub head actuator
15. Solution tank level sight tube
16. Console adjustment levers
17. Rear solution fill
18. Reverse switch
19. Squeegee lift lever
20. Control housing
21. Operating triggers
22. Solution tank
23. Rear casters
24. Transport wheels
25. Scrub head
26. Scrub head skirt
27. Skirt housing latch
28. Protective rollers
29. Front solution fill
30. Recovery tank
31. Recovery tank lid
32. Key switch
33. Squeegee vacuum hose
34. Squeegee mounting handwheel
Squeegee mounting handwheel
USER MANUAL
14
FANG 20HD-EU VF82881EU REV:01 2012.10.30
ENGLISH
ACCESSORIES/OPTIONS
In addition to the standard components, the machine can be equipped with the following accessories/options, according to the
ma-chine specific use:
Brush
Pad driver
For further information concerning the optional accessories, contact an authorised retailer.
TECHNICAL DATA
Model
FANG 20HD-EU
(1 brush/pad-holder, with drive system)
Machine height
mm
990
Solution/clean water tank capacity
l
61
Recovery water tank capacity
l
61
Front wheel diameter
mm
76
Rear wheel diameter
mm
200
Vacuum system motor power
W
400
Drive system motor power
W
250
Drive speed (variable)
km/h
0 – 4.5
Gradeability
%
2
Sound pressure level at workstation
dB(A)
69
Standard batteries
Ah @ 20 h
2 x 12V/215AmP.hR
Vacuum system circuit capacity
mm H2O
1.397
Cleaning width
mm
510
Squeegee width
mm
750
Machine maximum length
mm
1.350
Machine width without squeegee
mm
560
Brush diameter
mm
510
Weight without batteries and with empty tanks
kg
107
Maximum weight with batteries and full tanks
kg
181
Brush motor power
W
560
Brush speed
rpm
200
Brush/pad-holder pressure
kg UP TO91
USER MANUAL
VF82881EU REV:01 2012.10.30 FANG 20HD-EU
15
ENGLISH
USER MANUAL
16
FANG 20HD-EU VF82881EU REV:01 2012.10.30
ENGLISH
WIRING DIAGRAM (FANG20HD-EU )
WIRING DIAGRAM(FANG20HD-EU)
Colour codes
BLK Black
BLU Blue
GRU Green
RED Red
WHT White
1 BATTERY CAPACITY LIGHTS insert translation
2 MAIN SWITCH
insert translation
3 VACUUM SWITCH
insert translation
4 BRUSH SWITCH
insert translation
5 SOLUTION SWITCH
insert translation
6 AMMETER
insert translation
7 ACTUATOR
insert translation
8 TRIGGER SWITCH
insert translation
9 SPEED CONTROL BOARD
insert translation
10 DIRECTION SWITCH
insert translation
11
RIGHT BRUSH CIRCUIT
BREAKER
insert translation
12 KEY SWITCH
insert translation
13 MAIN CIRCUIT BREAKER
insert translation
14 BRUSH SOLENOID
insert translation
15 PCB
İnsert translation
16 SOLUTION SOLENOID
İnsert translation
17 ACTUATOR MOTOR
insert translation
18 BRUSH MOTOR
insert translation
19 VACUUM MOTOR
insert translation
20 DRIVE MOTOR
insert translation
21 VACUUM SOLENOID
insert translation
22 VACUUM CIRCUIT BREAKER
insert translation
23 MAIN SOLENIOD
insert translation
24 CHARGER PLUG
insert translation
25 BATTERY
insert translation
USER MANUAL
VF82881EU REV:01 2012.10.30 FANG 20HD-EU
17
ENGLISH
OPERATION
BEFORE STARTING THE MACHINE
WARNING!
On some points of the machine there are some adhesive plates indicating:
DANGER
WARNING
CAUTION
CONSULTATION
While reading this Manual, the operator must pay careful attention to the symbols shown on the plates. Do not cover these
plates for any reason and immediately replace them if damaged.
BATTERY INSTALLATION
WARNING!
The electric components of the machine can be seriously damaged if the batteries are either improperly
installed or connected. The batteries must be installed by qualified personnel only.
Set the function electronic board and the battery charger (optional) according to the type of batteries used
(WET or GEL).
Check the batteries for damage before installation.
Disconnect the battery connector and the battery charger plug.
Handle the batteries with great care.
Install the battery terminal protection caps supplied with the machine.
The machine requires two 12 V batteries, connected according to the below diagram:
There are no batteries on the machine from factory, but customers can purchase batteries ( WET or GEL).
Buy appropriate batteries (see Technical Data paragraph).
For battery choice and installation, apply to qualified battery dealers.
Set the machine and the battery charger according to the type of batteries installed (WET or GEL) as shown in the
following para-grap
a) When batteries (WET or GEL) are already installed and ready to be used
Check that the batteries are connected to the machine with the charger plug.
Insert the ignition key (32) and turn it to “on”.
If the green warning light (3) turns on, the batteries are ready to be used.
If the yellow or red warning light (3) turns on, the batteri es must be charged (see the procedure in Maintenance
chapter).
b) When batteries (WET) are installed on the machine, but without electrolyte
Open the cover (31) and check that the recovery water tank (30) is empty, otherwise empty it with the drain hose (11).
Carefully lift the tank (30).
USER MANUAL
18
FANG 20HD-EU VF82881EU REV:01 2012.10.30
ENGLISH
WARNING!
Pay attention when using sulphuric acid, as it is corrosive. If it comes in contact with skin or eyes, rinse
thoroughly with water and consult a physician.
Batteries have to be filled in a well-ventilated area. Wear protective gloves.
Fill up the battery cells with sulphuric acid for batteries (density 1.27 to 1.29 kg at 25°C) in accordance with the
instructions shown in the Battery Manual. The correct quantity of sulphuric acid is shown in the Battery Manual.
To avoid damaging the floor, dry with a cloth both acid and water on the top of the batteries after charging.
Let the batteries rest and fill in with sulphuric acid in accordance with the instructions shown in the Battery Manual.
Charge the batteries (see the procedure in Maintenance chapter).
BATTERY CHARGER SETTING
The charger default setting is common position for AGM,Gel,SLA,VRLA from factory
If needed use WET position only for lead batteries. Please contact dealer.
PRE-OPERATION CHECKS
Sweep the outside of the machine.
Make sure the voltage of machine conforms to local voltage.
Check that squeegee is properly installed.
Check that brush / pad is properly installed.
INSTALLING PAD DRIVER OR BRUSH
Ensure that the machine is turned off.
Lower brush head assembly to the floor by stepping on the foot pedal and pushing pedal forward.
Tilt the machine backward to access the drive motor hub.
NOTE
Remove the squeegee assembly prior to tilting the machine backwards. It makes the process faster and easier.
WARNING!
Do not keep the machine tilted back for a long time. This could cause battery acid to leak from the batteries.
If using a pad driver, first attach the appropriate pad to the pad driver surface.
Mount the pad driver or brush to the drive motor hub by lining up the three studs with the three holes in the drive motor
hub. Once in the holes, rotate the driver toward the spring clip to lock driver into place.
MOUNTING THE SQUEEGEE
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276
  • Page 277 277
  • Page 278 278
  • Page 279 279
  • Page 280 280
  • Page 281 281
  • Page 282 282
  • Page 283 283
  • Page 284 284
  • Page 285 285
  • Page 286 286
  • Page 287 287
  • Page 288 288
  • Page 289 289
  • Page 290 290
  • Page 291 291
  • Page 292 292
  • Page 293 293
  • Page 294 294
  • Page 295 295
  • Page 296 296
  • Page 297 297
  • Page 298 298
  • Page 299 299
  • Page 300 300
  • Page 301 301
  • Page 302 302
  • Page 303 303
  • Page 304 304
  • Page 305 305
  • Page 306 306
  • Page 307 307
  • Page 308 308
  • Page 309 309
  • Page 310 310
  • Page 311 311
  • Page 312 312
  • Page 313 313
  • Page 314 314
  • Page 315 315
  • Page 316 316
  • Page 317 317
  • Page 318 318
  • Page 319 319
  • Page 320 320
  • Page 321 321

Viper FANG 20HD-EU Uživatelský manuál

Kategorie
Vysavače
Typ
Uživatelský manuál